1983 Toyota Pickup Ignition Boots

Essential 1983 Toyota Pickup Ignition Boots

NGK – Ignition Wire Set (Part No.F1020115915NGK)

Ignition Wire Set

from

$44.48
NGK Resistor Spark Plug Wire Sets utilize a construction method known as variable pitch wire winding to create resistance to radio frequency interference. The variable pitch winding (loose/tight/loose) provides suppression throughout a very wide range by scrambling and breaking up the electrical waves radiated by the firing of the spark plugs. A ferrite magnetic layer consisting of a mixture of rubber, plastic and powdered ferrite magnetic materials, offers uniform resistance and unsurpassed conductivity. NGK wires have a lower resistance than conventional carbon core wires (8k ohm/meter versus 16k ohm/meter). This comparison is important to remember when you consider that many manufacturers recommend wires be replaced when the resistance exceeds 20k ohm/meter. This does not leave much margin for wear when the wire may only meet original standards at the very early stages of its life.

Product Features:
  • OE-Equivalent.
  • OEM style connectors for easy Installation.
  • Superior Firing and Fuel Savings
  • Outstanding Durability and Performance
  • Excellent Noise Suppression
  • Numbered for easy cylinder identification.
  • High quality EPDM and Silicone coverings.
See More

NGK – Spark Plug Wire Set (Part No.9799)

Spark Plug Wire Set

from

$43.49
NGK variable pitch resistor cables provide uniform resistance and ensure outstanding electrical conductivity in high-quality cables. Outer EPDM/silicone jacket and inner insulation contain high voltage currents for excellent dielectric strength. NGK varia

Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • PREMIUM ALLOY WINDING: Variable pitch winding over Ferrite magnetic alloy coating delivers ultra low resistance and excellent interference protection
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
See More

Intermotor Red Wire – Spark Plug Wire Set (Part No.52079)

Spark Plug Wire Set

from

$43.49
Premium Intermotor brand wire sets are designed to exactly replace the original equipment set. They feature conductors that match original equipment in material and resistance characteristics. Intermotor uses only the best in high temp jacketing and OE bo

Product Features:
  • Patented Hi-Gloss Clear Coat Formulation with Hi-temp Silicone Jacket. Enhances abrasion resistance while providing greater protection against severe temperatures
  • Enhanced Wire Core Design matched to OE type – Low ohm, Ferrite mag, Wire wound, Silicone, or Metallic. Channels maximum voltage to spark plug and enhanced RFI protection for better overall performance
See More

Intermotor Red Wire – Spark Plug Wire Set (Part No.55679)

Spark Plug Wire Set

from

$32.49
Spark Plug Wire Set

MSD Ignition – Wire Set; Super Conductor; 4-cyl.; 22R (Part No.31949)

Wire Set; Super Conductor; 4-cyl.; 22R

from

$103.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:
  • Less than 50 ohms per foot for superior spark
  • Ferro-magnetic impregnated core creates an effective EMI choke
  • 40 ft. Of Conductor Wound Into A Single Foot Of Wire
  • For high EMI suppression
  • Conductor core features Dupont Kevlar material
  • Proprietary compound sleeves for resistance to high heat/abrasion
See More

Intermotor Red Wire – Spark Plug Wire Set (Part No.53774)

Spark Plug Wire Set

from

$24.99
Premium Intermotor brand wire sets are designed to exactly replace the original equipment set. They feature conductors that match original equipment in material and resistance characteristics. Intermotor uses only the best in high temp jacketing and OE bo

Product Features:
  • Patented Hi-Gloss Clear Coat Formulation with Hi-temp Silicone Jacket. Enhances abrasion resistance while providing greater protection against severe temperatures
  • Enhanced Wire Core Design matched to OE type – Low ohm, Ferrite mag, Wire wound, Silicone, or Metallic. Channels maximum voltage to spark plug and enhanced RFI protection for better overall performance
See More

1983 Toyota Pickup Ignition Boots

Maybe you’re in the middle of a full rebuild of that 1983 Toyota Pickup. Maybe you just need a couple of Ignition Boots. Either way, Advance Auto Parts has 2 different Ignition Boots in our inventory ranging from $43.49 to $103.99. That means you can find the exact parts or products you need to keep that 1983 Toyota Pickup running smoothly.

Ignition Boots are only as good as their brand. We stock 2 different brands to make sure you have plenty of trusted parts to choose from for your 1983 Toyota Pickup. MSD Ignition and Intermotor Red Wire are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Ignition Boots for your 1983 Toyota Pickup, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Ignition Boots to keep your 1983 Toyota Pickup rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Ignition Boots Brands To Make Your 1983 Toyota Pickup Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1983 Toyota Pickup demands trusted brand parts and products to keep it running. Many trusted brands of Ignition Boots make up Advance Auto Parts’ inventory, and all are ready to help make your Pickup the best it can be. Be sure to browse some of our top Ignition Boots brands and parts.

FAQs for 1983 Toyota Pickup Ignition Boots

What are the most purchased Ignition Boots for the 1983 Toyota Pickup?

Out of 2 Ignition Boots for the 1983 Toyota Pickup, the most popular in our inventory are:
Wire Set; Super Conductor; 4-cyl.; 22R
from $103.99
This product is not rated
Wire Set; Super Conductor; 4-cyl.; 22R
Spark Plug Boots
Spark Plug Wire Set
from $43.49
This product is not rated
Spark Plug Wire Set
Spark Plug Boots