1983 Pontiac Firebird Performance Exhaust Products

Essential 1983 Pontiac Firebird Performance Exhaust Products

Dynomax – Exhaust Tail Pipe (Part No.43244)

Exhaust Tail Pipe

from

$57.99
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
  • DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS?–?Made from aluminized steel for durability and long life
  • BETTER TOGETHER — Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
See More

Dynomax – Super Turbo Muffler: Di Fit Aluminized Steel, 19" L, 2.5" In, 2.5" Out, Oval (Part No.17739)

Super Turbo Muffler: Di Fit Aluminized Steel, 19" L, 2.5" In, 2.5" Out, Oval

from

$84.99
Dynomax Super Turbo performance mufflers’ exclusive, patented, flow director design channels exhaust flow, and eliminates turbulence on most applications. The large internal flow tubes improve exhaust flow, and reduce backpressure. Each muffler uses fiberglass matting technology to absorb unwanted interior resonance, while maintaining a mellow performance tone.

Product Features:
  • Large internal flow tubes improve exhaust flow and reduce backpressure
  • Dyno proven to flow up to 700 SCFM
  • Exclusive patented flow director channels exhaust flow and eliminates turbulence on most applications.
  • Fiberglass matting technology absorbs unwanted interior resonance but maintains a mellow tone
  • 1.75-inch to 3-inch inlet / outlet configurations
See More

Flowmaster Inc. – 40 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.42443)

40 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound

from

$99.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

Dynomax – VT Universal Muffler (Part No.17138)

VT Universal Muffler

from

$151.99
DynoMax® VT mufflers offer a revolutionary, high-flow straight-through stainless steel performance muffler that controls irritating drone, while ensuring maximum performance. To provide Drone-Free Performance, DynoMax® Valve Technology mufflers feature an exclusive, precisely calibrated internal valve, that redirects exhaust flow during cruising conditions. Floor the gas, and the valve will automatically adjust for maximum exhaust flow, delivering on-demand performance and a deep, throaty drone-free sound.

Product Features:
  • Exclusive Dynomax® Valve Technology helps ensure Drone FREE performance
  • Micro-Finish Stainless Steel construction for lifelong protection
  • Slotted bushing ends
  • 100-percent welded construction for lifelong durability
  • CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
See More

Dynomax – Super Turbo Muffler (Part No.17777)

Super Turbo Muffler

from

$80.99
Dynomax Super Turbo Mufflers feature large internal flow tubes that improve exhaust flow and reduce back pressure. They are designed with a patented flow director that channels exhaust flow and eliminates turbulence. Their fiberglass matting technology absorbs unwanted interior resonance while maintaining a mellow performance tone.
See More

Flowmaster Inc. – 40 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.42543)

40 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound

from

$99.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

Dynomax – Exhaust Intermediate Pipe (Part No.52497)

Exhaust Intermediate Pipe

from

$87.99
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
  • DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS?–?Made from stainless steel for durability and long life
  • BETTER TOGETHER — Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
See More

Dynomax – 88028 Exhaust System Kit (Part No.88028)

88028 Exhaust System Kit

from

$234.99
Dynomax® Performance Exhaust, a leading performance exhaust brand built on over 20 years of market leadership. Each and every Dynomax® product is backed by engineers who know what you want and expect out of a performance exhaust product.

Product Features:
  • DynoMax® Universal ‘Y-Pipes’ feature O.D. sized inlet and outlets allowing for easy fabrication of custom exhaust systems. Manufactured using 16 gauge aluminized coated steel
  • Mandrel bends improve flow capacity over traditional bends
  • Combine state-of-the-art engineering with quality material to provide exceptional strength and durability
  • Dynomax® premium pre-bent pipe is manufactured with precision benders, and then fixture checked, insuring every part is a perfect fit, providing quick and easy installation.
  • Pipe diameters are increased from OEM sizes to improve flow and increase power
See More

Dynomax – Exhaust Intermediate Pipe (Part No.54773)

Exhaust Intermediate Pipe

from

$83.99
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
  • DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS?–?Made from stainless steel for durability and long life
  • BETTER TOGETHER — Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
See More

Flowmaster Inc. – Header-back System 409S – Dual Rear Exit – American Thunder- Moderate/Aggressive (Part No.817139)

Header-back System 409S - Dual Rear Exit - American Thunder- Moderate/Aggressive

from

$926.99
For the person looking for a complete Header-back dual exhaust system with an aggressive tone. With easy fit in mind, Flowmaster’s America Thunder system for GM F-Body cars includes specially-selected Super 44 mufflers to make your Camaro or Firebird come alive. This Header-back dual exhaust system uses 2.50 in. 409S stainless steel tubing (Backed by our 10-year warranty!) and a durable H-pipe design that delivers improved throttle response, power and mileage. American Thunder systems deliver a moderate to aggressive interior and exterior tone and are suited to the enthusiast who wants their performance to be heard. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation.
See More

MagnaFlow – Street Series Cat-Back Performance Exhaust System (Part No.15684)

Street Series Cat-Back Performance Exhaust System

from

$789.99
The MagnaFlow Street Series Cat-Back Performance Exhaust System 15684 brings out the personality of your Car with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Welded-On Single Wall Angle Cut Cut Edge tips, this Car exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Car’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15684 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15684 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:
  • Dyno-proven performance
  • Durable corrosion-resistant stainless steel construction
  • CNC precision robotic manufacturing techniques
See More

Hooker Headers – Super Competition Cat-Back System (Part No.16823HKR)

Super Competition Cat-Back System

from

$584.99
Super Competition Cat-Back System Black Finish Mufflers with Aluminized Tubing

Product Features:
  • Exit At Stock Locations
  • Mandrel Bent Not Press Bent
  • Mandrel Bent Not Press Bent
  • Maximum Flow
  • Uses Existing Stock Hangers
  • Large Diameter 16 Ga. Aluminum Tubing
  • Low Back Pressure and Long Life
  • Easy Installation
See More

MagnaFlow – Street Series Crossmember-Back Performance Exhaust System (Part No.15896)

Street Series Crossmember-Back Performance Exhaust System

from

$823.99
The MagnaFlow Street Series Crossmember-Back Performance Exhaust System 15896 brings enhanced engine sound and dyno-proven performance to your muscle car with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features a crossmember-back layout designed to replace your exhaust system from the crossmember on back. With its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit that you can enhance with tips of your choosing, your muscle car will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15896 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited lifetime construction warranty.

Product Features:
  • Dyno-proven performance
  • Durable corrosion-resistant stainless steel construction
  • CNC precision robotic manufacturing techniques
See More

Hooker Headers – Super Competition Cat-Back System (Part No.16820HKR)

Super Competition Cat-Back System

from

$556.99
Super Competition Cat-Back System Black Finish Mufflers with Aluminized Tubing

Product Features:
  • Exit At Stock Locations
  • Mandrel Bent Not Press Bent
  • Mandrel Bent Not Press Bent
  • Maximum Flow
  • Uses Existing Stock Hangers
  • Large Diameter 16 Ga. Aluminum Tubing
  • Low Back Pressure and Long Life
  • Easy Installation
See More

Flowmaster Inc. – Header-back System – Dual Rear Exit – American Thunder – Moderate/Aggressive (Part No.17139)

Header-back System - Dual Rear Exit - American Thunder - Moderate/Aggressive

from

$786.99
For the person who is looking for a complete Header-back dual exhaust system with an aggressive tone. With easy fit in mind, these systems are mandrel bent for maximum performance and include specially selected mufflers. American Thunder systems deliver a moderate to aggressive interior and exterior tone and are suited to the enthusiast who wants their performance to be heard. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation.
See More

Mr. Gasket – Performance Exhaust Gasket Set for Enhanced Sealing and Durability (Part No.150B)

Performance Exhaust Gasket Set for Enhanced Sealing and Durability

from

$20.99
Mr. Gasket Performance exhaust gasket material is a heavy duty material, .062 inch thick, consisting of an acrylic binder system to resist high temperature. This material is made for sealing exhaust applications. Provides excellent sealing and durability.

Product Features:
  • Manufactured from high-temperature acrylic blend exhaust material
  • Provides excellent sealing and durability
  • Can be trimmed if necessary for modified port applications
  • For OE replacement, high performance street, drag race and oval track use
  • Resists Deteriorating
  • Provides Excellent Torque Retention
See More

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1423)

Exhaust Manifold Gasket Set

from

$27.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
  • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
  • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
  • Slotted bolt holes allow for easier header installation.
  • Not intended for use in emission controlled vehicles.
See More

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1400)

Exhaust Manifold Gasket Set

from

$33.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
  • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
  • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
  • Slotted bolt holes allow for easier header installation.
  • Not intended for use in emission controlled vehicles.
See More

Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5920)

Ultra Seal: Exhaust Gasket Set

from

$45.99
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.

Product Features:
  • Manufactured from high-temperature steel core/graphite faced exhaust material
  • Expanded steel core provides stability and maximum torque retention to eliminate gasket failure
  • Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head
  • Conforms to and seals minor surface irregularities
  • Can be trimmed if necessary for modified port applications
  • For OE replacement, high performance street, drag race and oval track use
  • Anti-Stick Properties
  • Easy Removal For Disassembly
See More

Mr. Gasket – Exhsthdrgskt (Part No.7652G)

Exhsthdrgskt

from

$51.99
Header Installation Kit – Chevrolet V8 1955-1991 265-400 Oval Port. Includes gaskets and fasteners necessary for header installation. Made using premium Ultra-Seal exhaust and collector gaskets. Mr. Gasket header and collector bolts deliver necessary clamp-load to seal flange mating surfaces.

Product Features:
  • Oval Port Header Gaskets
  • Port Size 1.50″ x 1.82″
  • Collector Gasket 3.00″ Diam. 3-bolt Style
  • Includes Header & Collector Bolts
See More

Mr. Gasket – Aluminum Exhaust Gaskets for Intense Heat Resistance (Part No.7402G)

Aluminum Exhaust Gaskets for Intense Heat Resistance

from

$42.99
Upgrade to Mr. Gasket Aluminum Layered Header Gaskets and eliminate blown exhaust gaskets forever. They conform to warped and damaged surfaces to create an airtight, leak-proof seal and will not shrink or deteriorate EVER.

Product Features:
  • Withstands Intense Exhaust Heat
  • Reusable header, exhaust manifold and collector flange gaskets
  • Manufactured from “dead soft” aluminum layers – .125″ thick
  • Easy Removal For Disassembly
  • Conforms easily to surface irregularities (warped flanges)
  • Compresses down to 0.060″ to create a tight leak-proof seal
  • Will not shrink, deteriorate, or blow out- eliminating gasket leaks
  • For high performance street, drag race and oval track use
See More

Flowtech – Ceramic Header (Part No.31150FLT)

Ceramic Header

from

$499.99


Product Features:
  • Fuel Economy From The Engine
  • Leak Test For Max Performance
  • Ceramic Headers
  • Rust And Corrosion Resistance
  • Mandrel-Formed Power Plenum
  • Leakproof O-Ringed Port Seals
  • Include All Mounting Hardware
See More

Hooker Headers – Competition Header (Part No.2451-2HKR)

Competition Header

from

$895.99
LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

Product Features:
  • High Performance
  • Affordable
  • Durable 16 Gauge Material
  • Welds Easier
  • Lasts Longer
  • Heat Cured
  • High Heat Resistant
See More

Hooker Headers – LS Cast Iron Exhaust Manifold (Part No.8501-3HKR)

LS Cast Iron Exhaust Manifold

from

$576.99
LS Cast Iron Exhaust Manifold

Hooker Headers – Competition Header (Part No.4901-1HKR)

Competition Header

from

$688.99
LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

Product Features:
  • High Performance
  • Affordable
  • Durable 16 Gauge Material
  • Welds Easier
  • Lasts Longer
  • Heat Cured
  • High Heat Resistant
See More

Hooker Headers – Competition Header (Part No.2460HKR)

Competition Header

from

$278.99
LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

Product Features:
  • High Performance
  • Affordable
  • Durable 16 Gauge Material
  • Welds Easier
  • Lasts Longer
  • Heat Cured
  • High Heat Resistant
See More

Hooker Headers – High-Performance Small Block Chevy Long Tube Headers (Part No.2451HKR)

High-Performance Small Block Chevy Long Tube Headers

from

$283.99
Small block Chevy 350 applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

Product Features:
  • High Performance
  • Affordable
  • Durable 16 Gauge Material
  • Welds Easier
  • Lasts Longer
  • Heat Cured
  • High Heat Resistant
See More

Hooker Headers – Competition Header (Part No.2460-1HKR)

Competition Header

from

$680.99
LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

Product Features:
  • High Performance
  • Affordable
  • Durable 16 Gauge Material
  • Welds Easier
  • Lasts Longer
  • Heat Cured
  • High Heat Resistant
See More

1983 Pontiac Firebird Performance Exhaust Products

Maybe you’re in the middle of a full rebuild of that 1983 Pontiac Firebird. Maybe you just need a couple of Performance Exhaust Products. Either way, Advance Auto Parts has 19 different Performance Exhaust Products in our inventory ranging from $24.99 to $680.99. That means you can find the exact parts or products you need to keep that 1983 Pontiac Firebird running smoothly.

Performance Exhaust Products are only as good as their brand. We stock 7 different brands to make sure you have plenty of trusted parts to choose from for your 1983 Pontiac Firebird. Mr. Gasket, FEL-PRO Performance, and Dynomax are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Performance Exhaust Products for your 1983 Pontiac Firebird, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 106 reviews in this category, some of the top rated parts include 80 Series Muffler, 2.5in Offset Inlet 2.5in Dual Offset Outlet, Non-Reversible, Aggressive Sound with 3.8 stars and 80 Series Muffler, 3in Offset Inlet 2.5in Dual Offset Outlet, Non-Reversible, Aggressive Sound with 5.0 stars.

So if you’re in the market for aftermarket Performance Exhaust Products to keep your 1983 Pontiac Firebird rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Performance Exhaust Products Brands To Make Your 1983 Pontiac Firebird Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1983 Pontiac Firebird demands trusted brand parts and products to keep it running. Many trusted brands of Performance Exhaust Products make up Advance Auto Parts’ inventory, and all are ready to help make your Firebird the best it can be. Be sure to browse some of our top Performance Exhaust Products brands and parts.

Popular Flowtech Performance Exhaust Products

We carry Flowtech parts in our stock across Performance Exhaust Manifold Gaskets categories, plus more. For a 1983 Pontiac Firebird, our most popular Flowtech Performance Exhaust Products include:
Real-Seal; Header Gasket
from $85.39
(1)
Real-Seal; Header Gasket
Performance Exhaust Manifold Gaskets

Top 1983 Pontiac Firebird Performance Exhaust Products from Dynomax

Dynomax products are another trusted brand when it comes to Performance Exhaust Products for your 1983 Pontiac Firebird. Popular Dynomax parts include:
VT Universal Muffler
from $151.99
(2)
VT Universal Muffler
Performance Exhaust Mufflers

FAQs for 1983 Pontiac Firebird Performance Exhaust Products

What are the most purchased Performance Exhaust Products for the 1983 Pontiac Firebird?

Out of 19 Performance Exhaust Products for the 1983 Pontiac Firebird, the most popular in our inventory are:
Aluminum Exhaust Gaskets for Intense Heat Resistance
from $42.99
(4)
Aluminum Exhaust Gaskets for Intense Heat Resistance
Performance Exhaust Manifold Gaskets
Aluminum Exhaust Gasket: High-Heat Resistant, Easy Removal
from $42.99
This product is not rated
Aluminum Exhaust Gasket: High-Heat Resistant, Easy Removal
Performance Exhaust Manifold Gaskets
Exhaust Manifold Gasket Set
from $31.49
(2)
Exhaust Manifold Gasket Set
Performance Exhaust Manifold Gaskets

What are the top-rated 1983 Pontiac Firebird Performance Exhaust Products?

Top-rated Performance Exhaust Products for your 1983 Pontiac Firebird based on customer reviews/ratings are:
80 Series Muffler, 2.5in Offset Inlet 2.5in Dual Offset Outlet, Non-Reversible, Aggressive Sound
from $160.99
(4)
80 Series Muffler, 2.5in Offset Inlet 2.5in Dual Offset Outlet, Non-Reversible, Aggressive Sound
“Sounds great was a perfect gift to another car guy”
80 Series Muffler, 3in Offset Inlet 2.5in Dual Offset Outlet, Non-Reversible, Aggressive Sound
from $165.99
(1)
80 Series Muffler, 3in Offset Inlet 2.5in Dual Offset Outlet, Non-Reversible, Aggressive Sound
“Sounds great, easy install.. Great purchase.”