1983 Mercury Cougar Fuel and Emissions Systems

Essential 1983 Mercury Cougar Fuel and Emissions Systems

Felpro – Fuel Pump Mounting Gasket (Part No.6579)

Fuel Pump Mounting Gasket

from

$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Fuel Tank Cleaning Kit

from

$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye

Product Features:
  • Helps avoid premature fuel pump failure
  • Lint free towel included
  • Low suds formulation
  • Removes harmful contaminants from the fuel tank
See More

Carquest Premium – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.EVA1074)

Exhaust Gas Recirculation (EGR) Valve Gasket

from

$14.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Air Charge Temperature Sensor Connector (Part No.PTA1366)

Air Charge Temperature Sensor Connector

from

$20.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Dorman – Fuel Tank Vent Rollover Valve (Part No.911-060)

Fuel Tank Vent Rollover Valve

from

$27.99
This fuel tank vent valve is designed to match the fit and function of the original valve on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this fuel tank vent valve is designed to match the fit and function of the original valve on specified vehicles
  • Restores functionality – this valve is made to fit and fully restore part functionality after the original valve fails
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Fuel Pump Strainer FS160361 (Part No.FS160361)

Fuel Pump Strainer FS160361

from

$15.99
CARQUEST Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our CARQUEST Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. CARQUEST Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
  • OE upgraded turbine impellers greatly reduce fuel pulsation
  • All fuel pumps are 100% performance tested
See More

Felpro – Fuel Injector O-Ring Kit (Part No.ES 70599)

Fuel Injector O-Ring Kit

from

$7.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Carquest Premium – Locking Fuel Cap: 10507, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10507)

Locking Fuel Cap: 10507, Screw On, Direct Fit, Provides Tight Seal, 1 Pack

from

$22.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Protects your fuel from theft and vandalism
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

NTK – Air Charge Temperature Sensor (Part No.AJ0023)

Air Charge Temperature Sensor

from

$33.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • NTK’s Air Charge Temperature Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper monitoring of air temperature entering the engine.
  • The Air Charge Temperature Sensor is used by the Engine Control Unit (ECU) to measure air density for fuel mixture control, which allows it to make continuous adjustments to the engine’s air / fuel mixture for maximum fuel efficiency.
See More

Carquest Premium – Secondary Air Injection Pump Check Valve (Part No.CVC1003)

Secondary Air Injection Pump Check Valve

from

$30.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest – Ported Vacuum Switch (Part No.EC974)

Ported Vacuum Switch

from

$195.95
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Special designed thermal elements for improved performance
  • Our EGR products contain feature rich design and componentry yielding market leadership performance
  • BWD is a global manufacturer of emission components, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Spectra Premium – Fuel Pump (Part No.SP1121)

Fuel Pump

from

$76.99
CARQUEST enhanced electric in-tank fuel pumps are 100% quality tested and are designed to deliver quiet operation, industry-leading performance and durability. All CARQUEST pumps meet or exceed OE specifications in fit, form and function.

Product Features:
  • Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
  • Advanced polymers, brushes and commutators to ensure long life and durability in multiple fuel blends.
  • High-performance pump section assembly provides superior performance
  • Leading-edge inlet design to increase performance and efficiency, leading to longer life
  • High grade outer shell for life-long corrosion resistance
  • Optimized, precision-wound armature assembly for increased performance
See More

Dorman – 5-Wire Ford Fuel Pump Relay (Part No.84701)

5-Wire Ford Fuel Pump Relay

from

$13.99
This fuel pump harness connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this fuel pump harness connector matches the appearance and function of the factory hardware on specified applications
  • Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Exhaust Gas Recirculation (EGR) Valve (Part No.EGC1021)

Exhaust Gas Recirculation (EGR) Valve

from

$70.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Dorman – Fuel Tank Strap Set (Part No.578-101)

Fuel Tank Strap Set

from

$32.49
Recommended for replacement whenever the fuel tank is replaced or serviced, this strap is a direct replacement for the original. Manufactured from durable materials to withstand harsh road and weather conditions.

Product Features:
  • Direct replacement – this fuel tank strap matches the fit, function and performance of the original part
  • Ideal solution – recommended for replacement when the fuel tank is serviced or replaced
  • Durable construction – manufactured from quality materials for superior service and reliability
  • Trustworthy design – backed by 100 years of automotive aftermarket experience
See More

Spectra Premium – Fuel Tank (Part No.F23B)

Fuel Tank

from

$243.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tanks meet or exceed the performance of the original equipment they replace.

Product Features:
  • Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
  • Lock ring included with each tank to reduce installation time and to ensure a complete repair
  • Made with corrosion resistant, OE approved, Ni Terne steel for durability
  • Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
  • Each new fuel tank is road tested to ensure real world performance and to verify that each design meets our high standards for quality
  • Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
  • Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
  • Packaged with double-layered foam wrap and heavy-gauge corrugated board to ensure product quality at installation
See More

Carquest – Fuel Injection Pressure Regulator (Part No.24069)

Fuel Injection Pressure Regulator

from

$98.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Our fuel pressure regulators are application specific for the perfect fit and form
  • A robust engineering design for greater resistance to leakage
  • With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
  • BWD is a global manufacturer of original equipment and aftermarket fuel injection products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Carquest – Temperature Control Relay (Part No.R681)

Temperature Control Relay

from

$20.05
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:
  • The anti-lock brake (ABS) sensor uses OE matching connectors and terminals ensuring an accurate water-tight connection to the engine wire harness and fast and cost efficient installation.
  • O-ring is made of Viton material for optimal sensor performance at extreme hot and cold temperatures, as well as resistance to degradation from exposure to oils, fuels, lubricants and most mineral acids.
  • High-quality glass reinforced plastic resin provides high durability and protections against the elements and vehicle fluids and road debris.
  • Each direct replacement wire harness comes with a protective sleeve preventing wires from chafing and creating short circuits.
  • Grommets, wire clips, grease, mounting nut and instruction sheet are included on the harness ensuring proper mounting and routing within the car chassis for a fast and cost effective repair solution
See More

Accel – Perf Fuel Injectors 48Lb 8-Pak (Part No.150848)

Perf Fuel Injectors 48Lb 8-Pak

from

$527.99
ACCEL Performance fuel injectors provides precise control of fuel delivery & atomization for increased power and improved throttle response. They are all new units: not modified stock units or remanufactured from used cores. They feature a low-mass disc design that ensures accurate metering control even at ultra-low & high duty cycles and higher fuel pressures. ACCEL performance Injectors can be used with gasoline or E85 and are great for blown applications where increased fuel pressure and precise metering are required. State-of-the-art manufacturing processes reduce flow deviations between injectors, which improve performance. Low- and High-impedance designs are available to match most commercial applications.

Product Features:
  • Provides precise control of fuel delivery & atomization for increased power and improved throttle response
  • All new units: not modified stock units or remanufactured from used cores
  • New low-mass disc design ensures accurate metering control even at ultra-low & high duty cycles
  • Operates at higher fuel pressures without loss of metering control
  • Great for blown applications where increased fuel pressure and precise metering are required
  • State-of-the-art manufacturing processes reduce flow deviations between injectors to improve performance
  • Accurate Metering Control Even At Ultra-Low And High Duty Cycles
See More

Cardone – Smog Air Pump (Part No.32-290)

Smog Air Pump

from

$208.99
CARDONE Remanufactured Smog Pumps are engineered for quick installation and no comebacks. These pumps come with all necessary components for easy installation, while other brands leave out integral components, such as inlets and outlets that commonly break during installation. CARDONE engineers pay special attention to proper vane size and shape on each application to maintain proper flow, while other brands consolidate vane sizes for their own convenience.

Product Features:
  • 100% testing of all units guarantees reliable performance every time
  • High temperature grease extends bearing life, resulting in longer pump life
  • New carbon shoes/vanes on every unit ensure accurate air output to meet today’s stringent emissions standards
  • Guaranteed fit and function
  • Meets or exceeds O.E.M performance
See More

KAI – Fuel Tank Lock Ring (Part No.SPILO04)

Fuel Tank Lock Ring

from

$18.99
New Standard Replacement Fuel Tank Lock Ring, Large Gauge Fuel Level Sensor Hole: 2 5/8 Inch Or 3 5/8 Inch, Includes O-Ring, For 16 And 19 Gallon Tanks

Product Features:
  • Large Gauge, Fuel Level Sensor Hole, 2 5/8 Inch Or 3 5/8 Inch, Includes O-Ring, For 16 And 19 Gallon Tanks
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

DENSO – Oxygen Sensor: 4 Wire, 11.77" Long, Heated, Universal Fit (Part No.234-4210)

Oxygen Sensor: 4 Wire, 11.77" Long, Heated, Universal Fit

from

$80.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity; DENSO gives you the right part and the right fit, the first time.

Product Features:
  • Specifically designed to meet the increasing demands of today’s engines
  • 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
  • Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
  • Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
  • Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
See More

Dorman – Fuel Sending Unit Retainer Assortment (Part No.E3004425897DOR)

Fuel Sending Unit Retainer Assortment

from

$16.16
Recommended for replacement whenever the sending unit is serviced, Dorman’s Fuel Tank Sending Unit Lock Ring securely retains the fuel pump assembly to the lock. Its heavy-duty steel or plastic construction ensures a long life.

Product Features:
  • Comes with rubber seal or gasket
  • Direct replacement for a proper fit every time
  • Corrosion-resistant
  • Quality-tested for trouble-free performance
See More

Carquest Premium – Fuel Cap Tester Adapter (Part No.12410)

Fuel Cap Tester Adapter

from

$15.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:
  • BAR Certified adapters
  • Adapter check’s a fuel cap’s ability to hold pressure.
  • Adapters meet EPA standards for recommended fleet coverage.
  • Check adapter application chart for specific makes and models
See More

Carquest Premium – Engine Coolant Temperature Sensor (Part No.ACA1523)

Engine Coolant Temperature Sensor

from

$28.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Dorman – Fuel Filler Neck Grommet (Part No.577-502)

Fuel Filler Neck Grommet

from

$28.99
This fuel filler neck seal is designed to match the fit and function of the original seal on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this fuel filler neck seal is designed to match the fit and function of the original seal on specified vehicles
  • Restores functionality – this seal is made to fit and fully restore part functionality after the original seal fails
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Felpro – UPPER INTAKE MANIFOLD GASKET/ PLENUM GASKET (Part No.MS 94555)

UPPER INTAKE MANIFOLD GASKET/ PLENUM GASKET

from

$12.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Carquest Premium – Electric Fuel Pump Inertia Switch (Part No.SBA4426)

Electric Fuel Pump Inertia Switch

from

$84.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

1983 Mercury Cougar Fuel and Emissions Systems

You count on your 1983 Mercury Cougar to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 70 Fuel and Emissions Systems ranging in price from $1.79 to $331.99, you’re sure to find everything you need for your 1983 Mercury Cougar.

Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 13 different brands like Carquest Premium, Motorad, and Felpro. 1983 Mercury Cougar Fuel and Emissions Systems start as low as $1.79!

One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 977 extensive product reviews on 1983 Mercury Cougar Fuel and Emissions Systems. Some of the top-rated Fuel and Emissions Systems products we carry are Electric Fuel Pump with 2.5 stars and Locking Fuel Cap with 4.3 stars.

Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 1983 Mercury Cougar below to get started!

Top-Rated Fuel and Emissions Systems Brands For Your 1983 Mercury Cougar

Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1983 Mercury Cougar running right for years to come. In our inventory you’ll find brands like Carquest Premium, Motorad, Felpro, and even more.

Popular Felpro Fuel and Emissions Systems

You’ll find popular Felpro brand products across Fuel Pumps. All are waiting to get your 1983 Mercury Cougar back on the road. Some of the top-rated Felpro products in these categories are:
Fuel Pump Mounting Gasket
from $2.99
(26)
Fuel Pump Mounting Gasket
Fuel Pump Block-Off Plate Gaskets

Top-Rated Carquest Premium Fuel and Emissions Systems


If Carquest Premium are what you’re looking for, our inventory holds plenty. We stock Carquest Premium brand Fuel and Emissions Systems for your 1983 Mercury Cougar, and some of our most reviewed Carquest Premium parts include:

FAQs for 1983 Mercury Cougar Fuel and Emissions Systems

What are the most purchased Fuel and Emissions Systems for the 1983 Mercury Cougar?

Out of 70 Fuel and Emissions Systems for the 1983 Mercury Cougar, the most popular in our inventory are:
Fuel Tank Cleaning Kit
from $12.49
This product is not rated
Fuel Tank Cleaning Kit
Fuel Tank Cleaning Kits

What are the top-rated 1983 Mercury Cougar Fuel and Emissions Systems?

Top-rated Fuel and Emissions Systems for your 1983 Mercury Cougar based on customer reviews/ratings are:
Electric Fuel Pump
from $64.99
(37)
Electric Fuel Pump
“It works as advertised.”
Locking Fuel Cap
from $23.99
(35)
Locking Fuel Cap
“Had a check engine light and when I scanned it, calls for a new gas cap. Instead of buying oem from the dealer or just an ordinary gas cap from a part”
Locking Fuel Cap: 10501, Screw On, Direct Fit, Provides Tight Seal, 1 Pack
from $24.99
(32)
Locking Fuel Cap: 10501, Screw On, Direct Fit, Provides Tight Seal, 1 Pack
“Lost old gas cap and replaced with this one, which comes with a lock (which you don’t have to use,FYI)”