1983 Mazda 626 Steering and Chassis Parts
More 1983 Mazda 626 Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 1983 Mazda 626, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 1983 Mazda 626 Steering and Chassis Parts
Rare Parts – Sway Bar Bushing (Part No.RP16004)
from
$40.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Cardone – Rack and Pinion Assembly (Part No.22-250)
from
$278.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Product Features:
See More
Product Features:
- 100% replacement of rubber sealing components.
- Application of specialized lubricant(s) for extended life.
- Finished in protective coating to prevent corrosion and rust.
- Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Powercraft – Rack Pinion Seal Kit (Part No.8653)
from
$43.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Imperial – Quick Connect Coupler (Part No.240250)
from
$11.49
Imperial transmission line fitting kits allow for the installation of auxiliary cooler lines without cutting the vehicle’s original metal lines.
Product Features:
See More
Product Features:
- Quick Connect coupler
- Fits most 5/16″ transmission lines with 1/2″ – 20″ threads
- Simplifies transmission cooler installation
- Allows for auxiliary transmission cooler installation without cutting OE lines
Carquest Premium – Bulk – 3/8" I.D. Return Hose J189 (Part No.35002)
from
$47.49
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Whiteline – Sway Bar Link Bushing (Part No.W21169)
from
$23.99
Worn or deteriorated link bushings although small can have considerable influence over sway bar performance and more notably vehicle handling behaviour. Whiteline bushings are engineered to last and deliver improved driving performance.
Product Features:
See More
Product Features:
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)
from
$26.49
Product Features:
See More
- Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
- Small size provides an easy fit, even in cramped systems
- Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
- Filter can be easily serviced, extending its functional lifespan considerably
National – Bearings (Part No.A-2)
from
$15.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Camber Bolt Kit (Part No.DW-K90473)
from
$17.99
Camber Bolt Kit
Carquest Premium – Pressure Hose Assembly (Part No.35706)
from
$59.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Driveworks – Camber Bolt Kit (Part No.DW-K9757)
from
$24.99
Driveworks Brand Camber Cam Bolt Kit is mainly used for car chassis suspension system
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Precision engineered for improved ride and superior performance
- Performance tested to ensure durability
MOOG – Alignment Cam Bolt Assortment (Part No.CAM1A)
from
$434.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can solve excessive tire wear and steering issues
- Provides like-new steering, ease of installation and longer life
- Can bring vehicles back to factory specification
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
Powercraft – Pump Seal Kit (Part No.8723)
from
$31.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
MOOG – Stabilizer Bar Link Kit (Part No.K90104)
from
$13.79
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Improves upon OE designs
- Quiet, dependable operation
- Provides like-new steering, ease of installation and longer life
- Incorporates proven design and engineering features
- Incorporates proven design and engineering features
Carquest Premium – Bulk – 3/8" I.D. Return Hose J189 (Part No.36196)
from
$33.49
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Rare Parts – Tie Rod End (Part No.RP26309)
from
$26.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
EMPI – Steering Rack Boot Kit (Part No.M1030274156EMP)
from
$18.12
Steering Rack Boot Kit
MOOG – Rack & Pinion Bellows Kit (Part No.K9860)
from
$33.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Manufactured using premium materials
- Engineered to provide long life and dependability
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
Whiteline – Camber Adjusting Bolt (Part No.KCA412)
from
$48.99
Suffering uneven tyre wear? Sounds like poor alignment. Whiteline camber bolts provide the largest adjustment range (of up to +/- 1.5deg) to get that alignment back in check. Unlike other ‘friction’ lock designs we use a positive toothed lock washer which means NO SLIP. Simple to adjust and lock time after time with out slipping.
Product Features:
See More
Product Features:
- Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
MOOG – Camber Adjusting Kit (Part No.K9757)
from
$42.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
Cardone – Power Steering Pump (Part No.21-5862)
from
$158.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Product Features:
See More
Product Features:
- All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
- All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
- Units are supplied with 100% tested and calibrated pressure relief valves.
- Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Cardone – Power Steering Pump (Part No.21-5378)
from
$191.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Product Features:
See More
Product Features:
- All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
- All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
- Units are supplied with 100% tested and calibrated pressure relief valves.
- Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Whiteline – Sway Bar Link Washers (Part No.KW2)
from
$11.99
Has the thin galvanised metal washers on your OEM links flogged out? Whiteline have a specially designed, shaped and case hardened washers to suit the rigours wear and tear loads on sway bar link washers.
Product Features:
See More
Product Features:
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
MOOG – Suspension Control Arm and Ball Joint Assembly (Part No.RK620322)
from
$123.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
MOOG – Control Arm and Ball Joint Assembly (Part No.RK620337)
from
$135.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
Driveworks – Ball Joint (Part No.DW-K9615)
from
$21.99
Driveworks Brand ball joints are made to meet OE specifications. They play a critical role in the safe operation of the vehicle by eliminating unstable front-end suspension. Driveworks Brand chassis parts ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Premium Polychloroprene boot provides extended temperature range and better wear resistance
- Test-proven stud material helps prevent premature stud failure
- Provides premium gauge steel construction for strength and durability
- Performance tested to ensure durability
MOOG – Ball Joint (Part No.K500136)
from
$65.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Rare Parts – Ball Joint (Part No.RP10637)
from
$45.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Heat treated components
- Dust seal to prevent contamination
- Restores vehicle handling
- Restores OE alignment
Popular 1983 Mazda 626 Steering and Chassis Parts Categories
1983 Mazda 626 Steering and Chassis Parts
You count on your 1983 Mazda 626 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 51 Steering and Chassis Parts ranging in price from $2.49 to $434.99, you’re sure to find everything you need for your 1983 Mazda 626.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 14 different brands like DriveWorks, Carquest Premium, and Moog. 1983 Mazda 626 Steering and Chassis Parts start as low as $2.49!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 535 extensive product reviews on 1983 Mazda 626 Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Power Steering Filter with 3.8 stars and Bearings with 4.7 stars.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1983 Mazda 626 below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 1983 Mazda 626
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1983 Mazda 626 running right for years to come. In our inventory you’ll find brands like DriveWorks, Carquest Premium, Moog, and even more.
Popular Carquest Premium Steering and Chassis Parts
You’ll find popular Carquest Premium brand products across Power Steering Parts. All are waiting to get your 1983 Mazda 626 back on the road. Some of the top-rated Carquest Premium products in these categories are:
Top-Rated Imperial Steering and Chassis Parts
If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Steering and Chassis Parts for your 1983 Mazda 626, and some of our most reviewed Imperial parts include:
FAQs for 1983 Mazda 626 Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 1983 Mazda 626?
Out of 51 Steering and Chassis Parts for the 1983 Mazda 626, the most popular in our inventory are:
What are the top-rated 1983 Mazda 626 Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your 1983 Mazda 626 based on customer reviews/ratings are:
from
$9.99
(23)
Suspension Sway Bar Link Kit
“i p ut these on camaro front i wish the two links were the same color one link set was black and the other was blue so i spit the sets and made eac”
