1983 Lincoln Town Car Performance Engines

More 1983 Lincoln Town Car Performance Engines

Find your specific 1983 Lincoln Town Car original or aftermarket Performance Engines below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1983 Lincoln Town Car Performance Engines

Edelbrock – Intake Manifold Gasket for 1963-1996 Small-Block Fords (Part No.72208)

Intake Manifold Gasket for 1963-1996 Small-Block Fords

from

$165.99
Available in different sizes for many different vehicle models/years. Clean positive seal. Embossed silicone bead surrounding the port. Matched to manifolds and cylinder heads. In the early days of the automotive performance industry, you either ran what

Product Features:
  • Clean positive seal
  • Embossed Silicone Bead Surrounding The Port
  • Matched To Manifolds And Cylinder Heads
  • Fits 1963-96 289/302/351W Engines
  • 10-Pack Of Gaskets
See More
View Product

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1614)

Engine Valve Cover Gasket Set

from

$25.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Die cut silicone rubber gaskets conform to out-of-flat covers
  • Great for on-again/off-again situations
  • Not intended for use in emission controlled vehicles.
See More
View Product

FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2901)

Engine Crankshaft Seal Kit

from

$31.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
  • Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
  • Not intended for use in emission controlled vehicles.
See More
View Product

Edelbrock – Sure Seat Valve Springs for S/B Ford 289/302/351W O.E. Cast iron heads (Part No.5722)

Sure Seat Valve Springs for S/B Ford 289/302/351W O.E. Cast iron heads

from

$76.99
Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:
  • For Use With Cast Iron Heads
  • Springs Made of Highest Quality Spring Wire
  • Springs Precision Wound To Close Tolerances
  • Use with Original Equipment Heads Only
See More
View Product

Mr. Gasket – Ultra Seal; Oil Pan Gasket (Part No.6683)

Ultra Seal; Oil Pan Gasket

from

$54.99
Manufactured from cellulose and nitrile composition gasket material. A black latex rubber coating is applied to outside of gasket to help seal minor oil pan rail irregularities and eliminate the possibility of oil leakage. Provides excellent sealing and durability. Complete with molded rubber front/rear oil pan seals where applicable. For OE replacement, high performance street, drag race and oval track.

Product Features:
  • Maxi-seal fiber material
  • Superior blow-out resistance
  • High-tensile strength
  • Reduces gasket splitting
  • Graphite non-wicking rubber
  • No cork particles
  • Easy removal for disassembly
See More
View Product

Mr. Gasket – Intake Manifold Bolts (Part No.958G)

Intake Manifold Bolts

from

$19.99
Choose from grade 5 hex or socket head intake bolts or grade 8 bolts with twelve point smaller-than-standard head and flange, ideal for where space is minimal. Bolts and washers are bright zinc plated for protection and appearance.

Product Features:
  • Grade 8 material
  • Extra thick flat washers
  • Ideal for minimal space
  • 12-pt head and flange
  • Zinc plated for protection
See More

(1 reviews)
View Product

Mr. Gasket – Chrome Dress-Up Kit (Part No.9833)

Chrome Dress-Up Kit

from

$149.99
Kits include most popular chrome dress-up components, including short, OEM height valve covers with integral oil baffles.

Product Features:
  • Includes oil baffles
  • Chrome plated
See More

(1 reviews)
View Product

Edelbrock – Performer Series Retainer (Qty 16) (Part No.9724)

Performer Series Retainer (Qty 16)

from

$100.99
Product Features:
  • Use W/ Valve Springs Part #5822, 5882, 5896, 5872, 5867, 5812, 5857
  • Set of 16
  • 1.50 in. Outside Diameter
  • Steel Material
  • Black Oxide Finish
See More
View Product

Mr. Gasket – MLS Head Gasket (Part No.3175G)

MLS Head Gasket

from

$103.99
Manufactured from nitrile coated spring steel layers. Stress formed embossment provides excellent sealing. Also provides stability and reduces cylinder bore distortion. Ideal for super charged, turbo charged, nitrous oxide and extreme compression ratios. For high performance street, drag race and oval track. Packaged individually.

Product Features:
  • Ss layers with a elastomer coating
  • Stress formed embossments to seal ext pressure
  • Provides stability and reduces cyl distortion
  • For high performance street drag and oval track
See More
View Product

Edelbrock – Performer; Cylinder Head (Part No.60289)

Performer; Cylinder Head

from

$726.99


Product Features:
  • 50-State Street Legal Aluminum Cylinder Head
  • Out-of-the-Box Bolt-On Performance
  • Torque Improved Over Stock
  • Accept V8 Pedestal Rocker Arms
  • Accept V8 Valvetrains
See More
View Product

Edelbrock – 289-302 Ford Head Bolt Kit (Part No.8552)

289-302 Ford Head Bolt Kit

from

$107.99


Product Features:
  • Highest Quality Head Bolts
  • Cold-Formed/Heat Treated
  • Ensures Molecular Integrity
  • Reduced Diameter Bolt Heads
  • Hardened/Parallel-Ground Washers Included
  • Rated At 170000 psi
  • Manufactured By ARP
See More

(7 reviews)
View Product

Mr. Gasket – Ultra Seal; Sure-Lock Rocker Arm Nuts (Part No.923G)

Ultra Seal; Sure-Lock Rocker Arm Nuts

from

$77.99
Designed to keep the rocker arms positively locked for precise and critical valve train adjustments. Manufactured from quality grade steel, then heat-treated for extra strength and plated with a durable finish. Kits include 16 rocker arm nuts with socket head set screws and one hex key wrench.

Product Features:
  • Sure-lock rocker arm nuts
  • Precise valve train adjustment
  • Keep rocker arms locked
  • High-quality grade steel
  • Heat-treated for ex strength
  • Plated with durable gold tone finish
See More
View Product

Competition Cams – ROCKER ARMS, DIE CAST ALUM SMALL BLOCK FORD 1.6 1 ST (Part No.17043-16)

ROCKER ARMS, DIE CAST ALUM SMALL BLOCK FORD 1.6 1 ST

from

$237.99
The COMP Cams High Energy Die-Cast Aluminum Roller Rocker Arms are new rocker arms from the valve train leader that have been designed for street and moderate race use. They feature a die-cast body created from aluminum with a needle bearing fulcrum and roller tip. The die-cast, larger than stock body offers the strength properties and light weight of aluminum while the specially engineered fulcrum and roller tip decrease friction and lower oil temperatures, thus improving response and horsepower.

Product Features:
  • Cost effective aluminum construction provides superior strength to weight ratio
  • Needle bearing fulcrum and roller tip reduce friction and lower oil temperatures for improved response and horsepower
  • Durable design increases valve lift while withstanding the rigors of moderate race use
  • Die-formed aluminum body is larger than stock, and may require modifications to stock valve covers for clearance.
See More

(1 reviews)
View Product

Mr. Gasket – Super Intake Manifold Bolts (Part No.6082)

Super Intake Manifold Bolts

from

$40.99
Super Intake Manifold Bolts
View Product

Edelbrock – Water Pump for Small-Block Ford 351W in Black Finish (Part No.88433)

Water Pump for Small-Block Ford 351W in Black Finish

from

$358.99
Edelbrock #88433 Water Pump Ford 1970-78 302 & 1970-87 351w v8 black ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using state-of-the-art racing technology, Edelbrock has designed these “super cool

Product Features:
  • Standard Impeller Rotation
  • 0.625 in. Pilot Shaft
  • 0.750 in. Ball/Ball Bearing
  • 5.70 in. Block To Hub Height
  • Black Finish
See More
View Product

Edelbrock – Hex-A-Just By Cloyes Adj. True-Roller Timing Chain Set (Part No.7335)

Hex-A-Just By Cloyes Adj. True-Roller Timing Chain Set

from

$185.99


Product Features:
  • Dial-In Your Camshaft With Ease
  • Made From Induction Hardened Billet Steel
  • Solid Bushing Chain Resists Stretching
  • Billet SAE-1144 Steel Crank Sprockets
  • Multiple Keyways
See More
View Product

Edelbrock – TIMING CHAIN (Part No.7844)

TIMING CHAIN

from

$29.99
Product Features:
  • Timing Chain Only
See More
View Product

B & M – CONVERTER AOD HP (Part No.40437)

CONVERTER AOD HP

from

$297.99
A higher than stock stall speed as delivered by a B&M Converter will provide several advantages. The high stall converter allows the engine to launch the car at a higher RPM where more torque is available and increased strength.

Product Features:
  • New Precision Pump Drive Tube
  • Pressure Tested
  • Fully Balanced
  • Needle Thrust Bearing
  • New Thrust Washer
  • Washer Between Turbine and Cover
See More
View Product

Mr. Gasket – Ultra Seal; Harmonic Balancer Bolt/Washer Kit (Part No.7847)

Ultra Seal; Harmonic Balancer Bolt/Washer Kit

from

$35.99
The grade 8 bolts feature high hex head to prevent socket slippage. The thick parallel ground washer allows accurate uniform torque. Black finished, complete with split lock washer to prevent loosening.

Product Features:
  • Grade 8 material
  • Heat-treated for strength
  • Hex prevents socket slippage
  • Accurate and uniform torque
  • Black plated finish
See More
View Product

Edelbrock – Pushrod Set for Small Block Ford 289-302 (Part No.9632)

Pushrod Set for Small Block Ford 289-302

from

$210.99
Product Features:
  • Case-Hardened Tubing
  • Surface Hardening
  • Welded Ends
  • 0.3125 in. Diameter
  • Use with or without Hardened Steel Guideplates
See More
View Product

Competition Cams – XE Computer Controlled 206/212 Hydraulic Roller Cam K-Kit for Ford 5.0L (Part No.K35-512-8)

XE Computer Controlled 206/212 Hydraulic Roller Cam K-Kit for Ford 5.0L

from

$1157.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,

Product Features:
  • Excellent performance in street fuel injected applications.
  • More vacuum allows an increase in duration for improved performance and assists power brakes.
  • Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
  • Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
See More
View Product

Popular 1983 Lincoln Town Car Performance Engines Categories

Performance Intake Manifolds
Performance Intake Manifolds
Performance Engine Dress-Up Kits
Performance Engine Dress-Up Kits
Performance Engine Water Pumps
Performance Engine Water Pumps
Performance Engine Cylinder Head Gaskets
Performance Engine Cylinder Head Gaskets
Performance Engine Camshaft and Lifter Kits
Performance Engine Camshaft and Lifter Kits
Performance Engine Harmonic Balancers
Performance Engine Harmonic Balancers
Performance Engine Intake Manifold Gaskets
Performance Engine Intake Manifold Gaskets
Performance Engine Timing Sets and Components
Performance Engine Timing Sets and Components
Performance Engine Valve Springs
Performance Engine Valve Springs
Performance Engine Valve Cover Gasket Sets
Performance Engine Valve Cover Gasket Sets
Performance Engine Rocker Arms
Performance Engine Rocker Arms
Performance Engine Oil Pan Gaskets
Performance Engine Oil Pan Gaskets
Performance Intake Manifold Hardware
Performance Intake Manifold Hardware
Performance Engine Main Bearing Gasket Sets
Performance Engine Main Bearing Gasket Sets
Performance Engine Cylinder Head Bolts
Performance Engine Cylinder Head Bolts
Performance Engine Push Rods
Performance Engine Push Rods
Performance Engine Cylinder Heads
Performance Engine Cylinder Heads
Performance Torque Converters
Performance Torque Converters
Performance Engine Valve Spring Retainer
Performance Engine Valve Spring Retainer

1983 Lincoln Town Car Performance Engines

Maybe you’re in the middle of a full rebuild of that 1983 Lincoln Town Car. Maybe you just need a couple of Performance Engines. Either way, Advance Auto Parts has 36 different Performance Engines in our inventory ranging from $19.99 to $1,157.99. That means you can find the exact parts or products you need to keep that 1983 Lincoln Town Car running smoothly.

Performance Engines are only as good as their brand. We stock 5 different brands to make sure you have plenty of trusted parts to choose from for your 1983 Lincoln Town Car. FEL-PRO Performance, Mr. Gasket, and Edelbrock are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Performance Engines for your 1983 Lincoln Town Car, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 23 reviews in this category, some of the top rated parts include Torker II 302 Intake Manifold Small-Block Ford with 2.0 stars and Chrome Dress-Up Kit with 2.0 stars.

So if you’re in the market for aftermarket Performance Engines to keep your 1983 Lincoln Town Car rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Performance Engines Brands To Make Your 1983 Lincoln Town Car Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1983 Lincoln Town Car demands trusted brand parts and products to keep it running. Many trusted brands of Performance Engines make up Advance Auto Parts’ inventory, and all are ready to help make your Town Car the best it can be. Be sure to browse some of our top Performance Engines brands and parts.

Popular FEL-PRO Performance Performance Engines

We carry FEL-PRO Performance parts in our stock across Performance Engine Intake Manifold Gaskets categories, plus more. For a 1983 Lincoln Town Car, our most popular FEL-PRO Performance Performance Engines include:
Lower Intake Manifold Gasket Set: 5 Piece Set
from $31.49
(1)
Lower Intake Manifold Gasket Set: 5 Piece Set
Performance Engine Intake Manifold Gaskets
Lower Intake Manifold Gasket Set: 11 Piece Set
from $33.99
(4)
Lower Intake Manifold Gasket Set: 11 Piece Set
Performance Engine Intake Manifold Gaskets
Engine Valve Cover Gasket Set
from $46.99
(1)
Engine Valve Cover Gasket Set
Performance Engine Valve Cover Gasket Sets

FAQs for 1983 Lincoln Town Car Performance Engines

What are the most purchased Performance Engines for the 1983 Lincoln Town Car?

Out of 36 Performance Engines for the 1983 Lincoln Town Car, the most popular in our inventory are:
Intake Manifold Bolts
from $19.99
(1)
Intake Manifold Bolts
Performance Intake Manifolds
Intake Manifold Gasket for 1963-1996 Small-Block Fords
from $28.99
(1)
Intake Manifold Gasket for 1963-1996 Small-Block Fords
Performance Engine Intake Manifold Gaskets
289-302 Ford Head Bolt Kit
from $107.99
(7)
289-302 Ford Head Bolt Kit
Performance Engine Cylinder Head Bolts

What are the top-rated 1983 Lincoln Town Car Performance Engines?

Top-rated Performance Engines for your 1983 Lincoln Town Car based on customer reviews/ratings are:
Torker II 302 Intake Manifold Small-Block Ford
from $376.99
(1)
Torker II 302 Intake Manifold Small-Block Ford
“Nice looking product but mine was a used store return so I returned it.”
Chrome Dress-Up Kit
from $149.99
(1)
Chrome Dress-Up Kit
“I expected a better chrome plating/finish on this kit. However, for the money it is a good kit. I would recommend this for daily driver restoration ”
ROCKER ARMS, DIE CAST ALUM SMALL BLOCK FORD 1.6 1 ST
from $237.99
(1)
ROCKER ARMS, DIE CAST ALUM SMALL BLOCK FORD 1.6 1 ST
“These things break very easy. Not a big fan of the soft brass when trying to install them with the screwdriver head they use. Change it hex and it woy”

More Popular Parts for All Makes