1983 Lincoln Continental Fuel and Emissions Systems

Below you will find various in-demand Lincoln Fuel and Emissions Systems, components and accessories for your 1983 Continental. Advance Auto Parts has popular Continental parts like Fuel Pumps, Fuel Injectors, Air Flow Sensors and more. You’ll also find aftermarket and OEM Fuel and Emissions Systems for other Continental model years including 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2019, 2020 and more. Select a category of 1983 Lincoln Continental Fuel and Emissions Systems below and start saving instantly.

Popular 1983 Lincoln Continental Fuel and Emissions Systems Categories

Fuel Tank Cleaning Kits

Gas Caps

Fuel Pumps

Oxygen Sensors

Fuel Filler Neck Seals

Air Charge Temperature Sensors

Ambient Air Temperature Sensors

Electric Pump Filter and Strainers

Fuel Injector Seal Kits

Fuel Tank Straps

Fuel Injector Gaskets

Fuel Tank Lock Rings

Fuel Tank Vent Valves

EEC-IV Test Plug Connectors

Fuel Cap Tester Adapters

Essential Fuel and Emissions Systems for 1983 Lincoln Continentals

from

$19.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$12.49

When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:

Helps avoid premature fuel pump failure
Lint free towel included
Low suds formulation
Removes harmful contaminants from the fuel tank

from

$219.99

All Edelbrock fuel rails are machined from high quality extruded aluminum. Each kit includes fuel rails, stands and mounting hardware. Fuel fittings, crossover line and regulator not included. 3628 Fuel Rail Kit is for use on 1986-1995 5.0L Mustangs with

Product Features:

Clear Anodized Finish
High Capacity Fuel Rails
For Use W/ 1986-1995 5.0L Mustangs W/ A Stock Or Edelbrock Manifold
0.375 in. NPT Inlet / Outlet
Made In The USA

from

$34.99

Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance

Product Features:

Meets or exceeds OE specifications for fit, form and function
Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$186.99

This secondary air injection pump is designed to match the fit and function of the original pump on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this secondary air injection pump is designed to match the fit and function of the original pump on specified applications.
Restores functionality – reliable replacement for an original part that is leaking or has failed due to internal component failure.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$27.99

This fuel tank vent valve is designed to match the fit and function of the original valve on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this fuel tank vent valve is designed to match the fit and function of the original valve on specified vehicles.
Restores functionality – this valve is made to fit and fully restore part functionality after the original valve fails.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$3.29

The ACDelco Professional Fuel Injector Seal Kit contains high quality aftermarket replacement components for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket kit contains components that are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$14.49

Recommended for replacement whenever the sending unit is serviced, this fuel tank sending unit lock ring securely retains the fuel pump assembly to the lock. Made of durable materials for reliable service.

Product Features:

Direct replacement – this fuel tank sending unit lock ring is made to match the fit and performance of the original ring on specific vehicle applications.
Recommended for replacement whenever the sending unit is serviced, this fuel tank sending unit lock ring securely retains the fuel pump assembly to the lock
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$11.99

CARQUEST Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our CARQUEST Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. CARQUEST Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$75.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:

Precisely manufactured internal valves, diaphragms and springs means excellent performance under all engine operating conditions
Quiet operation, no audible regulator noise
Robust diaphragm materials means longer life, improved durability and compatibility with a wide range of fuels
Consistent and predictable fuel pressure throughout system range of control provides great drivability

from

$26.49

Replace only the damaged connectors instead of the entire fuel line with these direct-replacement fuel line connectors. Designed for easy installation and a precise fit, they are engineered to withstand extreme underhood conditions.

Product Features:

Direct replacement – these fuel line connectors fit and function like the vehicle’s original equipment connectors for reliable, leak-free performance.
Quality construction – manufactured from premium materials for a long service life.
Saves money – replace only the part, not the entire assembly
Excellent value – original equipment quality at a lower price

from

$32.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$37.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank straps meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our expertise
Direct fit ensures safe, secure fuel tank installation
Product individually packaged and labeled to help reduce product damage prior to installation
Industry leading coverage on straps for plastic tanks

from

$3.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$33.49

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$29.99

This fuel filler neck seal is designed to match the fit and function of the original seal on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this fuel filler neck seal is designed to match the fit and function of the original seal on specified vehicles.
Restores functionality – this seal is made to fit and fully restore part functionality after the original seal fails.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$29.49

from

$33.49

The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.

Product Features:

Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck.
Motorcraft and Ford Parts are manufactured from first-quality materials – chosen specifically for maximum performance and application suitability.
As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these after market replacement parts, ensuring the most current technology and performance.

from

$545.99

ACCEL Performance fuel injectors provides precise control of fuel delivery & atomization for increased power and improved throttle response. They are all new units: not modified stock units or remanufactured from used cores. They feature a low-mass disc design that ensures accurate metering control even at ultra-low & high duty cycles and higher fuel pressures. ACCEL performance Injectors can be used with gasoline or E85 and are great for blown applications where increased fuel pressure and precise metering are required. State-of-the-art manufacturing processes reduce flow deviations between injectors, which improve performance. Low- and High-impedance designs are available to match most commercial applications.

Product Features:

Provides precise control of fuel delivery & atomization for increased power and improved throttle response
All new units: not modified stock units or remanufactured from used cores
New low-mass disc design ensures accurate metering control even at ultra-low & high duty cycles
Operates at higher fuel pressures without loss of metering control
Great for blown applications where increased fuel pressure and precise metering are required
State-of-the-art manufacturing processes reduce flow deviations between injectors to improve performance

from

$461.99

ACCEL Performance fuel injectors provides precise control of fuel delivery & atomization for improved throttle response. They are all new units: not modified stock units or remanufactured from used cores. They feature a low-mass disc design that ensures accurate metering control even at ultra-low & high duty cycles and higher fuel pressures. ACCEL performance Injectors can be used with gasoline or E85 and are great for blown applications where increased fuel pressure and precise metering are required. State-of-the-art manufacturing processes reduce flow deviations between injectors, which improve performance. Low- and High-impedance designs are available to match most commercial applications.

Product Features:

Provides precise control of fuel delivery & atomization for improved throttle response
All new units: not modified stock units or remanufactured from used cores
New low-mass disc design ensures accurate metering control even at ultra-low & high duty cycles
Operates at higher fuel pressures without loss of metering control
Great for blown applications where increased fuel pressure and precise metering are required
State-of-the-art manufacturing processes reduce flow deviations between injectors to improve performance

from

$36.49

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$15.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$32.02

The Walker Air Charge Temperature Sensor is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium Original Equipment replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$34.11

The Walker Air Charge Temperature Sensor is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium Original Equipment replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$32.99

Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Includes Smart Link Connector, no soldering required
No special tools required for installation
Seared protection tube due to 100% functional quality test
Performance meets or exceeds OE specifications

from

$58.99

DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit, the first time.

Product Features:

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$6.01

Fuel Pump Gasket – M

from

$9.99

Carquest Premium fuel pump tank seals are built by Carter Fuel Systems and Agility Auto Parts, industry leaders in high-quality fuel system components. Carquest Premium offers a complete line of fuel pump tank seals covering a wide variety of North American vehicle applications. Carquest Premium fuel pump tank seals are engineered to meet or exceed all OEM specifications.

Product Features:

Engineered to meet or exceed all OEM specifications.
Precision stamped and are treated with a rust proof finish to ensure durability and strength

Upgrade your 1983 Lincoln Continental with Top-Quality Fuel and Emissions Systems

When it comes to maintaining or upgrading your 1983 Lincoln Continental, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Lincoln or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your Continental functioning at its best. At Advance Auto Parts, we offer a wide selection of 58 Fuel and Emissions Systems for the 1983 Lincoln Continental, designed to meet your needs without breaking the bank. From Fuel Pump replacements to Fuel Injectors upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 1983 Lincoln Continental at great prices. Our Fuel and Emissions Systems inventory for this model ranges from just $2.49 to $331.99, with an average price of $42.14. Our 58 Fuel and Emissions Systems in stock come from 13 trusted brands, so you’re sure to find the right part for your 1983 Lincoln Continental without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1983 Lincoln Continental, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names like Carquest Premium Delphi, and more. Carquest Premium Fuel and Emissions Systems start at just $2.49 and boast an impressive 4 stars average rating from customers. With 478 customer reviews and counting, our 1983 Lincoln Continental Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1983 Lincoln Continental is always ready to roll. We’re committed to providing you with everything you need to keep your Continental in top shape, all in one place. Start shopping confidently below for your 1983 Lincoln Continental!

Best-Selling Fuel Pumps for 1983 Lincoln Continentals

Enhance the driving experience in your Lincoln with 14 quality Fuel Pump components, starting at $4.49.

show more show less

from

$13.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:

Filtration performance and micron rating meet or exceed OE requirements
OE replacement strainer designed for use with Delphi electric fuel pumps
Replacing the strainer is always recommended when replacing a fuel pump

from

$29.99

This fuel filler neck seal is designed to match the fit and function of the original seal on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this fuel filler neck seal is designed to match the fit and function of the original seal on specified vehicles.
Restores functionality – this seal is made to fit and fully restore part functionality after the original seal fails.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$51.99

Carquest Premium electric fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$46.99

CARQUEST enhanced electric in-tank fuel pumps are 100% quality tested and are designed to deliver quiet operation, industry-leading performance and durability. All CARQUEST pumps meet or exceed OE specifications in fit, form and function.

Product Features:

Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
Advanced polymers, brushes and commutators to ensure long life and durability in multiple fuel blends
High-performance pump section assembly provides superior performance
Leading-edge inlet design to increase performance and efficiency, leading to longer life
High grade outer shell for life-long corrosion resistance
Optimized, precision-wound armature assembly for increased performance

from

$61.99

Carquest Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$123.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
Improved pump performance as a result of Delphi’s innovative design and durability
Restores fast pressure performance and system integrity, translating to better pumping through less energy
Part is validated, tested and matched to the right vehicle application
Lower amperage draws less load on vehicle’s electrical system
Always be sure to check and clean fuel tank to avoid unnecessary returns
Always replace the fuel strainer when doing a fuel pump repair

from

$11.99

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$125.99

New Platinum Pro Electric Fuel Pump Externl Mount, 2 Fuel Pumps May Be Requireduired

Product Features:

2 Fuel Pumps May Be Required
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$73.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
Improved pump performance as a result of Delphi’s innovative design and durability
Restores fast pressure performance and system integrity, translating to better pumping through less energy
Part is validated, tested and matched to the right vehicle application
Lower amperage draws less load on vehicle’s electrical system
Always be sure to check and clean fuel tank to avoid unnecessary returns
Always replace the fuel strainer when doing a fuel pump repair

from

$199.99

CARQUEST fuel pump sender assemblies feature exact fit, with design improvements, such as upgraded polymers, brushes, and commutators to ensure lasting durability in multiple fuel blends. Also features advanced rust-inhibiting finish for longer life.

Product Features:

Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
Advanced rust-inhibiting finish for long-lasting durability
High-performance pump section assembly provides superior performance
Leading-edge inlet design to reduce friction and increase performance
Gradient density strainer designed for better contamination resistance

from

$76.99

Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
Advanced polymers, brushes and commutators to ensure long life and durability in multiple fuel blends.
High-performance pump section assembly provides superior performance
Leading-edge inlet design to increase performance and efficiency, leading to longer life
High grade outer shell for life-long corrosion resistance
Optimized, precision-wound armature assembly for increased performance

from

$34.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$15.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$4.49

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium strainers meet or exceed the performance of the original equipment they replace.

Product Features:

Designed with gradient density to meet or exceed OE specifications
Engineered and developed in Canada
Designed to ensure optimal filtration to prevent fuel system contamination
Strainer material tested and validated for capacity and efficiency by accredited, third party
Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
Engineered and developed by Spectra Premium; proud member of the A.A.S.A. fuel pump manufacturers working group

Most Popular 1983 Lincoln Continental Fuel Injectors

Customize your Lincoln with 6 Fuel Injectors products like Fuel Injector Gaskets, Fuel Injectors, and Pressure Regulators, all priced under $84.99.

show more show less

from

$6.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$3.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$52.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:

Precisely manufactured internal valves, diaphragms and springs means excellent performance under all engine operating conditions
Quiet operation, no audible regulator noise
Robust diaphragm materials means longer life, improved durability and compatibility with a wide range of fuels
Consistent and predictable fuel pressure throughout system range of control provides great drivability

from

$84.99

WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to

from

$48.49

CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:

Each unit is 100% tested to OE specifications
Includes new O-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$3.49

CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:

Premium OE quality materials
Services one injector

Top Picks for 1983 Lincoln Continental Air Flow Sensors

Upgrade Lincoln Continentals with top-quality Air Flow Sensors parts, including 2 OEM and aftermarket selections for your 1983 model.

show more show less

from

$25.99

from

$20.99

Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:

High grade materials that are equal to or better

In-Demand Oxygen Sensors for 1983 Lincoln Continentals

Select from 2 premium Oxygen Sensors parts for your 1983 Lincoln Continental, with prices ranging from $32.99 to $45.99.

show more show less

from

$32.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Includes Smart Link Connector, no soldering required
No special tools required for installation
Seared protection tube due to 100% functional quality test
Performance meets or exceeds OE specifications

from

$45.99

NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

Most Sold 1983 Lincoln Continental Gas Caps

Explore our best-selling Lincoln parts for the 1983 Continental among 12 OEM and aftermarket options starting from $6.99.

show more show less

from

$11.99

None

Product Features:

Protects your fuel from theft and vandalism
Manufactured from durable, long-life materials
Independently tested for emission control
Passes all state and federal emissions tests
Reduces air pollution with proper sealing and venting

from

$14.99

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$15.49

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$15.79

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$24.99

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$16.79

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control
“Torque Override” feature aids in the proper installation of the fuel cap. It produces an audible click as the O-ring that seals the cap is properly compressed.

from

$23.99

None

Product Features:

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$21.79

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$22.99

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$6.99

None

Product Features:

Protects your fuel from theft and vandalism
Manufactured from durable, long-life materials
Independently tested for emission control
Passes all state and federal emissions tests
Reduces air pollution with proper sealing and venting

from

$23.99

Experience uncompromising quality and emissions compliance with these tethered fuel caps. Manufactured with top-tier materials and rigorous production and safety standards adhering to Original Equipment Manufacturer guidelines. Designed meticulously to meet both state and federal emissions requirements, it ensures environmental responsibility. With its specifically engineered pressure and vacuum relief valves, fuel evaporation becomes a thing of the past. Bid farewell to the risk of losing up to 30 gallons of precious gasoline over a year due to a leaking fuel cap. Trust in our superior construction to safeguard your fuel and contribute to a greener future.

from

$10.99

None

Product Features:

Protects your fuel from theft and vandalism
Manufactured from durable, long-life materials
Independently tested for emission control
Passes all state and federal emissions tests
Reduces air pollution with proper sealing and venting

Top-Rated Fuel and Emissions Systems Brands For Your 1983 Lincoln Continental

Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 1983 Lincoln Continentals. Below you’ll find some of our best rated Fuel and Emissions Systems from Carquest Premium and Delphi, and more. Fuel and Emissions Systems from these brands that fit a 1983 Continental start at just $2.49 and are rated as high as 4 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.

Popular Carquest Premium 1983 Lincoln Continental Fuel and Emissions Systems

When it comes to maintaining or upgrading your 1983 Lincoln Continental, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. Carquest Premium ticks all of those boxes. We offer a wide selection of Carquest Premium Fuel and Emissions Systems, specifically designed for the 1983 Lincoln Continental. With over 29 Carquest Premium brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $2.49, with an average price of just $30.14. Plus, with over 411 customer reviews and an average rating of 4 stars, you can trust that our Carquest Premium Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$10.99

This product is not rated

Keyed Alike Locking Fuel Cap

“”

from
$9.99

This product is not rated

Fuel Tank Lock Ring

“”

from
$32.99

This product is not rated

Fuel Tank Lock Ring

“”

Popular Delphi 1983 Lincoln Continental Fuel and Emissions Systems

Delphi auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 1983 Lincoln Continental owner should feel confident when installing genuine Delphi parts in their vehicle. To ensure the best fit and performance for your 1983 Continental, Advance Auto Parts carries a full inventory of 6 Delphi Fuel and Emissions Systems. Plus you will be keeping your Lincoln in peak condition while saving money because prices on these Delphi Fuel and Emissions Systems range from $12.49 to $123.99, plus, with more than 13 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.

from
$123.99

This product is not rated

Electric Fuel Pump: With Extra Fitting, Retaining Clips, Seal, Splices, Terminal Hardware

“”

from
$73.99

This product is not rated

Electric Fuel Pump: With Blade Terminal Connectors, Formed Hose Piece, Gasket, Clips, Seals

“”

from
$12.49

This product is not rated

Fuel Tank Cleaning Kit

“”

FAQs for 1983 Lincoln Continental Fuel and Emissions Systems

Which Fuel and Emissions Systems are best-sellers for 1983 Lincoln Continentals?

Out of 58 Fuel and Emissions Systems that fit 1983 Lincoln Continentals, the following parts are the top sellers:

Fuel Cap: 10837, Round, Direct Fit, Provides Tight Seal, 1 Pack (18481528) – $14.99
Tethered Gas Cap: Non-Locking, Original Equipment Manufacturer, Reduces Air Pollution, 1 Pack (12102600) – $23.99
Fuel Tank Cleaning Kit (11692237) – $12.49

What’s the price range for 1983 Lincoln Continental Fuel and Emissions Systems?

Fuel and Emissions System prices for the 1983 Lincoln Continental start at $2.49 and go up to $331.99 for the most premium parts.

What’s the average price of a Fuel and Emissions System for a 1983 Lincoln Continental?

The average price for Fuel and Emissions Systems for the 1983 Lincoln Continental is $42.14. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Fuel and Emissions Systems for other Lincoln Continental model years?

Yes, we currently carry Fuel and Emissions Systems for 46 model years of Lincoln Continentals between 1942 and 2020. Fuel and Emissions Systems are bought most frequently for the following model years: 2020, 2019, 2002, 2001, 2000, 1999, 1998, 1997, and 1996.

What are the cheapest Fuel and Emissions Systems for my 1983 Lincoln Continental?

The cheapest 1983 Lincoln Continental Fuel and Emissions Systems we carry in stock are:

Exhaust Gas Recirculation (EGR) Valve Gasket (12481919) – $2.49
Exhaust Gas Recirculation (EGR) Valve Gasket (5181593) – $3.49
Fuel Injector Seal Kit (11449731) – $3.49
Carburetor Mounting Gasket (5182115) – $3.99
Fuel Pump Strainer (11512515) – $4.49

What are the top-rated Fuel and Emissions Systems that fit the 1983 Lincoln Continental?

Out of 478 reviews by customers, our 1983 Lincoln Continental Fuel and Emissions Systems have an average customer rating of . These are some of the highest-rated Fuel and Emissions System types for the 1983 Lincoln Continental and their top-rated products:

Oxygen Sensors
- Oxygen Sensor: 1 Wire, 5.31" Long, Non-heated, Universal Fit (3486079) – $32.99

What types of Fuel and Emissions Systems do you sell for my 1983 Lincoln Continental?

As of 2/5/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 1983 Lincoln Continental:

Can I get help with 1983 Lincoln Continental Fuel and Emissions System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Lincoln Fuel and Emissions Systems and more.

What is your return policy for Lincoln Continental Fuel and Emissions Systems?

Advance Auto Parts keeps returns simple. For new Lincoln Continental Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1983 Lincoln Continental Fuel and Emissions Systems

Felpro – Fuel Injection Plenum Gasket Set (Part No.MS 97214)

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Edelbrock – Fuel Injection Fuel Rail #3628, 3/8 in. NPT Clear For Ford Small-Block Windsor (Part No.3628)

Carquest Premium – Mechanical Fuel Pump 3510505: Includes Gasket (Part No.3510505)

Dorman – (A.I.R.) Air Injection Reaction Pump, Smog Pump (Part No.306-020)

Dorman – Fuel Tank Vent Rollover Valve (Part No.911-060)

ACDelco – Fuel Injector Fuel Feed and Return Pipe O-Ring Kit with 2 O-Rings (Part No.217-3366)

Dorman – Help – Fuel Sending Unit Retainer Kit (Part No.55811)

Carquest Premium – Fuel Pump Strainer FS260336 (Part No.FS260336)

Delphi – Fuel Injection Pressure Regulator (Part No.FP10049)

Dorman – 5/16 In. Quick Connector, Straight w/ 18 In. of 3/8 In. Nylon Tube and a Union (Part No.800-054)

Carquest Premium – Engine Diagnostic Connector (Part No.PTA1662)

Spectra Premium – Fuel Tank Strap (Part No.ST14)

Felpro – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.70020)

Carquest Premium – Locking Fuel Cap: 10502, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10502)

Dorman – Fuel Filler Neck Grommet (Part No.577-502)

Carquest Premium – Secondary Air Injection Pump Check Valve (Part No.CVC1009)

Motorcraft – Original Equipment (O.E.) Sensor Assembly – Tripminder (Part No.DY-1160)

Accel – Perf Fuel Injectors 32Lb 8-Pak (Part No.150832)

Accel – Perf Fuel Injectors 23Lb 8-Pak (Part No.150823)

Carquest Premium – Fuel Cap Tester Adapter (Part No.12419)

Carquest Premium – Fuel Cap Tester Adapter (Part No.12410)

Walker Products – Air Charge Temperature Sensor (Part No.C6000175481WKR)

Walker Products – Air Charge Temperature Sensor (Part No.C6000352505WKR)

Bosch – Oxygen Sensor: 1 Wire, 5.31" Long, Non-heated, Universal Fit (Part No.11027)

DENSO – Oxygen Sensor: 4 Wire, 13.15" Long, Heated, Exact Fit (Part No.234-4610)

Motorcraft – Fuel Pump Gasket – M (Part No.E3011672280MTR)

Carquest Premium – Fuel Tank Lock Ring (Part No.LO1582930)

Delphi – Fuel Pump Strainer (Part No.FS0177)

Dorman – Fuel Filler Neck Grommet (Part No.577-502)

Carquest Premium – Fuel Pump Includes Includes Strainer (Part No.E319609)

Carquest Premium – Electric Fuel Pump (Part No.E2484)

Carquest Premium – Fuel Pump E2510428 (Part No.E2510428)

Delphi – Electric Fuel Pump: With Extra Fitting, Retaining Clips, Seal, Splices, Terminal Hardware (Part No.FD0029)

Carquest Premium – Fuel Pump Strainer FS260336 (Part No.FS260336)

KAI – Electric Fuel Pump (Part No.FMD010087)

Delphi – Electric Fuel Pump: With Blade Terminal Connectors, Formed Hose Piece, Gasket, Clips, Seals (Part No.FE0127)

Carquest Premium – Fuel Pump and Sender Assembly (Part No.HS2542549)

Spectra Premium – Fuel Pump (Part No.SP1121)

Carquest Premium – Fuel Cap Tester Adapter (Part No.12427)

Carquest Premium – Fuel Cap Tester Adapter (Part No.12410)

Spectra Premium – Fuel Pump Strainer (Part No.STR08)

Felpro – Carburetor Mounting Gasket (Part No.60716)

Felpro – Carburetor Mounting Gasket (Part No.60244)

Delphi – Fuel Injection Pressure Regulator (Part No.FP10399)

Wells Vehicle Electronics – Fuel Injection Pressure Regulator (Part No.5G1150)

Carquest Premium – Remanufactured Fuel Injector (Part No.A116-1012)

Carquest Premium – Fuel Injector Seal Kit (Part No.AS004)

Carquest Premium – Air Charge Temperature Sensor (Part No.WTA1073)

Carquest – Air Charge Temperature Sensor (Part No.31A1018)

Bosch – Oxygen Sensor: 1 Wire, 5.31" Long, Non-heated, Universal Fit (Part No.11027)

NTK – Switching Oxygen Sensor: 1 Wire, 7" Long, Non-Heated, Direct Fit (Part No.23552)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17591)

Carquest Premium – Fuel Cap: 10837, Round, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10837)

Carquest Premium – Fuel Cap: 10834, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10834)

Carquest Premium – Gas Cap: Twist On, Reduces Air Pollution, 1 Pack (Part No.10817)

Carquest Premium – Locking Fuel Cap: 10501, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10501)

Carquest Premium – Fuel Cap: 10819, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10819)

Carquest Premium – Locking Fuel Cap (Part No.10591)

Carquest Premium – Locking Fuel Cap: 10504, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10504)

Carquest Premium – Locking Fuel Cap: 10507, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10507)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17504)

Motorad – Tethered Gas Cap: Non-Locking, Original Equipment Manufacturer, Reduces Air Pollution, 1 Pack (Part No.MGC817T)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17507)