1983 Honda Accord Brake Parts

Essential Brake Parts for 1983 Honda Accords

Cardone – Vacuum Brake Booster: Without Master Cylinder (Part No.53-6606)

Vacuum Brake Booster: Without Master Cylinder

from

$174.99
Our remanufactured Power Brake Boosters are built to match original performance standards. Every unit is completely disassembled, cleaned, inspected and renewed with O.E.-quality components. Reverse engineering provides insight into why the unit failed, often resulting in an improved product. All units are 100% tested to ensure proper fit and function.

Product Features:
  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • All units are 100% tested to ensure reliable performance.
  • Guaranteed fit and function.
See More

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-4939)

Vacuum Brake Booster: Without Master Cylinder

from

$100.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:
  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • All units are 100% tested to ensure reliable performance.
  • Guaranteed fit and function.
See More

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-5410)

Vacuum Brake Booster: Without Master Cylinder

from

$86.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:
  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • All units are 100% tested to ensure reliable performance.
  • Guaranteed fit and function.
See More

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-4913)

Vacuum Brake Booster: Without Master Cylinder

from

$80.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:
  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • All units are 100% tested to ensure reliable performance.
  • Guaranteed fit and function.
See More

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-2710)

Vacuum Brake Booster: Without Master Cylinder

from

$309.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:
  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • All units are 100% tested to ensure reliable performance.
  • Guaranteed fit and function.
See More

Nissin – Premium OE Replacement Brake Pads (Part No.N1010283324NIS)

Premium OE Replacement Brake Pads

from

$62.99
This part matches Original Equipment (OE) quality specifications which means that it is at least as good if not better than the original part the manufacturer supplied the car with. The Nissin OE premium formulated brake pads are designed and manufacturing to original equipment specifications, assuring superior quality and fit.

Product Features:
  • OE-Equivalent and Direct Fit application.
  • Formulated to OE Specifications.
  • Superior friction qualities.
  • Organic compound.
See More

Nissin – Premium OE Replacement Brake Pads (Part No.N1010381627NIS)

Premium OE Replacement Brake Pads

from

$60.39
This part matches Original Equipment (OE) quality specifications which means that it is at least as good if not better than the original part the manufacturer supplied the car with. The Nissin OE premium formulated brake pads are designed and manufacturing to original equipment specifications, assuring superior quality and fit.

Product Features:
  • OE-Equivalent and Direct Fit application.
  • Formulated to OE Specifications.
  • Superior friction qualities.
  • Organic compound.
See More

World Brake Resources – Ceramic Brake Pads (Part No.N1010412452WBR)

Ceramic Brake Pads

from

$37.28
Dual Technology Ceramic (DTC) – Low Noise – Low Dust WBR ceramic brake pads are specially formulated for driving conditions that require superior friction effectiveness without compromising low noise or low dust characteristics. The advanced ceramic formulation mitigates wheel dust, brake fade, low speed and high heat squeal, at the same time providing positive pedal feel and long-life. Every WBR ceramic brake pad comes with a platform specific shim and has a burnished contact surface (scorched) just like OEM pads to ensure easy break-in and proper long-term functionality. Advanced Material Platform Specific Brake Pad Shims: To effectively combat brake squeal, WBR utilizes different advanced materials in the shim construction, as well as fastening the shim to the pad with both mechanical tabs and silicone adhesives. This platform specific advanced material shim design is included with every WBR brake pad.

Product Features:
  • Original Equipment Performance
  • Solid Pedal Feel With Smooth Braking Performance
  • Ultra-Quiet Ceramic Formulation
  • Low Dust – Long Life
  • Advanced Material Platform Specific Shims
  • Scorched for Easy Break In
  • Positive Mold Construction
  • All WBR Pads are 100% Shimmed
See More

Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.MKD959)

Brake Pads: Reliable and Dependable Stopping

from

$41.99
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.

Product Features:
  • Dependable stopping power
  • Singler layer shim for quiet braking
  • OE-designed slots and chamfers to reduce noise and vibration
  • Powder-coated backing plate prevents corrosion
See More

Carquest Professional Platinum – Brake Pads: With Hardware, Ceramic, Better Performance, Quiet (Part No.PXD787H)

Brake Pads: With Hardware, Ceramic, Better Performance, Quiet

from

$62.99
Carquest Professional Platinum brake pads are the optimal braking solution that provide an unmatched level of performance and reliability. These brake pads are engineered by an Original Equipment Manufacturer (O.E.M.) that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. We use an industry-leading number of friction formulations for maximum performance and extended pad life on each application. Carquest Professional Platinum brake pads also utilize a patented 4-layer HEX shim, now upgraded with aramid fibers, to provide quiet braking and reduce shim wear. These brake pads are also supplied with coated brake hardware and caliper pin grease for nearly every application. Carquest Professional Platinum brake pads are the ideal choice when looking for shorter stopping distances, quiet braking and longer-lasting brakes.

Product Features:
  • Industry-leading number of application specific formulations for maximum performance and extended pad life
  • On-vehicle testing similar to original equipment tests
  • Patented 4-Layer HEX Shim Technology provides quiet braking
  • HEX shim design utilizes aramid fibers, the same fibers used in bulletproof vests, to reduce shim wear
  • Burnishing compound allows for a faster break-in of pads and rotors
  • PTFE coated hardware and caliper pin grease included for nearly every application
  • Powder-coated backing plate prevents corrosion
See More

Dorman – Help – Brake Fluid Reservoir Cap: Threaded, Provides Tight Seal, 1 Pack (Part No.42038)

Brake Fluid Reservoir Cap: Threaded, Provides Tight Seal, 1 Pack

from

$47.49
This brake master cylinder cap is designed to match the fit and function of the original cap on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this brake master cylinder cap is designed to match the fit and function of the original cap on specified vehicles.
  • Restores functionality – reliable replacement for an original part that is missing or failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Master Cylinder Reservoir Cap (Part No.N3030290855DOR)

Master Cylinder Reservoir Cap

from

$58.19
Dorman’s Brake Master Cylinder Caps are engineered for affordability and convenience. Save time, money and labor by replacing only the Cap, instead of the entire Brake Master Cylinder.

Product Features:
  • Constructed of high-quality plastic for lasting durability
  • Available in diverse styles, including threaded and locking
  • Protects braking system by providing a tight seal against the elements
  • A necessary safety item – prevents brake fluid from splashing and/or leaking
See More

Carquest Professional Platinum – Brake Pads: With Hardware, Ceramic, Better Performance, Quiet (Part No.PXD1451H)

Brake Pads: With Hardware, Ceramic, Better Performance, Quiet

from

$63.99
Carquest Professional Platinum brake pads are the optimal braking solution that provide an unmatched level of performance and reliability. These brake pads are engineered by an Original Equipment Manufacturer (O.E.M.) that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. We use an industry-leading number of friction formulations for maximum performance and extended pad life on each application. Carquest Professional Platinum brake pads also utilize a patented 4-layer HEX shim, now upgraded with aramid fibers, to provide quiet braking and reduce shim wear. These brake pads are also supplied with coated brake hardware and caliper pin grease for nearly every application. Carquest Professional Platinum brake pads are the ideal choice when looking for shorter stopping distances, quiet braking and longer-lasting brakes.

Product Features:
  • Industry-leading number of application specific formulations for maximum performance and extended pad life
  • On-vehicle testing similar to original equipment tests
  • Patented 4-Layer HEX Shim Technology provides quiet braking
  • HEX shim design utilizes aramid fibers, the same fibers used in bulletproof vests, to reduce shim wear
  • Burnishing compound allows for a faster break-in of pads and rotors
  • PTFE coated hardware and caliper pin grease included for nearly every application
  • Powder-coated backing plate prevents corrosion
See More

Wagner Brake – ThermoQuiet OE Ceramic Disc Pad Set (Part No.N1010932772WAG)

ThermoQuiet OE Ceramic Disc Pad Set

from

$55.45
THE “ONE-PIECE” BRAKE PAD THAT PROVIDES QUIETER BRAKING. Wagner® ThermoQuiet® brake pads are the quieter, “one-piece” brake pads. They feature Integrally Molded Sound Insulator (IMI) that integrates the friction material, backing plate and insulator into a single high strength component. The application-specific design spreads out heat, sound and vibration over a much larger surface area for quieter operation. A unique application-specific laser-shaped friction optimizes pad-to-rotor interface for better braking performance. The proprietary Wagner® OE21 formulations feature a complex matrix of materials that replicate the functions of copper while setting new benchmarks and providing across-the-board improvements in NVH control, stopping power, durability and dusting characteristics.

Product Features:
  • 35% Quieter
  • 15% More stopping power
  • Longer lasting
  • Cleaner wheels
  • Install Wagner Brake products with total confidence
See More

Carquest Premium Gold – Brake Pads: With Hardware, Ceramic, Long Life and Quiet (Part No.GNAD537)

Brake Pads: With Hardware, Ceramic, Long Life and Quiet

from

$53.99
Carquest Premium Gold brake pads are original equipment (O.E.) replacement brake pads designed for consistent, quiet and clean braking. Our brake pads are engineered by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium Gold brake pads utilize application-specific friction formulations that provide extended pad life and cleaner wheels. These brake pads also feature OE-designed slots and chamfers for consistent performance. To prevent noise, our Carquest Premium Gold brake pads also utilize a multi-layer shim and are supplied with new brake hardware (most applications-see fitment notes). Carquest Premium Gold brake pads are the best choice when looking for brake pads that meet or exceed the OE stopping performance.

Product Features:
  • Application-specific friction formulations provide shorter stopping distances and extended pad life
  • Hardware included for most applications
  • OE-designed slots and chamfers to reduce noise and vibration
  • Multi-layer shim provides near silent braking
  • Powder-coated backing plate prevents corrosion
See More

Akebono – Brake Pad Set (Part No.N10102709746AKE)

Brake Pad Set

from

$72.86
Brake Pad Set

World Brake Resources – Ceramic Brake Pads (Part No.N1010413355WBR)

Ceramic Brake Pads

from

$45.02
Dual Technology Ceramic (DTC) – Low Noise – Low Dust WBR ceramic brake pads are specially formulated for driving conditions that require superior friction effectiveness without compromising low noise or low dust characteristics. The advanced ceramic formulation mitigates wheel dust, brake fade, low speed and high heat squeal, at the same time providing positive pedal feel and long-life. Every WBR ceramic brake pad comes with a platform specific shim and has a burnished contact surface (scorched) just like OEM pads to ensure easy break-in and proper long-term functionality. Advanced Material Platform Specific Brake Pad Shims: To effectively combat brake squeal, WBR utilizes different advanced materials in the shim construction, as well as fastening the shim to the pad with both mechanical tabs and silicone adhesives. This platform specific advanced material shim design is included with every WBR brake pad.

Product Features:
  • Original Equipment Performance
  • Solid Pedal Feel With Smooth Braking Performance
  • Ultra-Quiet Ceramic Formulation
  • Low Dust – Long Life
  • Advanced Material Platform Specific Shims
  • Scorched for Easy Break In
  • Positive Mold Construction
  • All WBR Pads are 100% Shimmed
See More

Akebono – Pro-ACT Ultra-Premium OE Ceramic Brake Pads (Part No.N1010125237AKE)

Pro-ACT Ultra-Premium OE Ceramic Brake Pads

from

$84.32
For replacement brake pads that are designed for your vehicle, trust the name that manufacturers trust Akebono Pro-ACT® Ultra-Premium brake pads. Manufactured from carefully selected materials designed to help minimize and/or virtually eliminate unwanted brake dust, Pro-ACT Ultra-Premium brake pads provide consistent, smooth stopping power across a wide range of driving conditions, including panic stops. Replacement Brake Pads from the Creators of Akebono Ceramic Technology® Engineered to eliminate noise, vibration, and harshness, Pro-ACT Ceramic Disc Brake Pads provide the ultimate braking experience. The best replacement for restoring OE ceramic pad performance, Pro-ACT Ceramic Disc Pads are also ideal for upgrading from conventional pads. In addition to dramatically quieter braking, Pro-ACT Ceramic Pads provide best-in-class braking performance, including enhanced initial effectiveness (no break-in required), high resistance to fade, consistent brake pedal feel, and ultra-low dusting for cleaner wheels and tires. Akebono’s ceramic technology also causes minimal wear on brake rotors.

Product Features:
  • Virtually eliminates noise, vibration, and harshness (NVH)
  • Vehicle-optimized ceramic formulas for superior performance
  • Unrivaled stopping power
  • Clean wheels
  • No break-in required
  • Rotor-friendly with proven longer rotor life
  • Perfect upgrade for all braking systems
  • Made in the USA
See More

Carquest Wearever – Brake Shoes (Part No.S832)

Brake Shoes

from

$46.49
Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime.  Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.

Product Features:
  • Wearever Brake Shoes come bonded or riveted based on OE design. 
  • Wearever Brake Shoes are coated to prevent rust.
  • Wearever Brake Shoes are 100% New not remanufactured.
  • Brand may vary by location
See More

Akebono – Ceramic Brake Pads: Quiet, Smooth Stopping Power, Enhanced Braking Performance (Part No.N10101663919AKE)

Ceramic Brake Pads: Quiet, Smooth Stopping Power, Enhanced Braking Performance

from

$95.70
For replacement brake pads that are designed for your vehicle, trust the name that manufacturers trust Akebono Pro-ACT? Ultra-Premium brake pads. Manufactured from carefully selected materials designed to help minimize and/or virtually eliminate unwanted brake dust, Pro-ACT Ultra-Premium brake pads provide consistent, smooth stopping power across a wide range of driving conditions, including panic stops. Replacement Brake Pads from the Creators of Akebono Ceramic Technology? Engineered to eliminate noise, vibration, and harshness, Pro-ACT Ceramic Disc Brake Pads provide the ultimate braking experience. The best replacement for restoring OE ceramic pad performance, Pro-ACT Ceramic Disc Pads are also ideal for upgrading from conventional pads. In addition to dramatically quieter braking, Pro-ACT Ceramic Pads provide best-in-class braking performance, including enhanced initial effectiveness (no break-in required), high resistance to fade, consistent brake pedal feel, and ultra-low dusting for cleaner wheels and tires. Akebono’s ceramic technology also causes minimal wear on brake rotors.

Product Features:
  • Virtually eliminates noise, vibration, and harshness (NVH)
  • Vehicle-optimized ceramic formulas for superior performance
  • Unrivaled stopping power
  • Clean wheels
  • No break-in required
  • Rotor-friendly with proven longer rotor life
  • Perfect upgrade for all braking systems
  • Made in the USA
See More

Adler – Adler Brake Master Cylinder (Part No.N3000136776ADL)

Adler Brake Master Cylinder

from

$232.25
Adler supplies master cylinder brake actuation systems featuring quality and performance.

Product Features:
  • High efficiency
  • Low pressure differential between primary and secondary circuits
  • Good bleedability
  • Cr6-free surfaces for vehicles built from July 2007 (as required by law)
  • Central valve version suitable for ABS
See More

Carquest Wearever – Brake Master Cylinder MCA630296: New, With Reservoir (Part No.MCA630296)

Brake Master Cylinder MCA630296: New, With Reservoir

from

$109.99
Cylinder casting is constructed from high-quality cast iron or aluminum for long-lasting durability

Product Features:
  • All rubber parts are of high-quality EPDM compound for resistance to DOT3 or DOT4 brake fluid
  • Key components like spring are from high and stable quality suppliers.
  • Products are machined by CNC machines with strictly quality control.
  • Parts assembled in a clean environment and all parts were thoroughly cleaned before assembly.
  • Direct replacement for a proper fit
  • Manufactured to strict engineering quality standards, meets S.A.E. specifications
  • Each product is 100% tested on production lines and sampling tested prior to shipment
  • Key working procedure used CNC, positioning accuracy ± 0.005/300 mm, repeat positioning accuracy + /-0.037 mm
  • Main cylinder hole of measured by the 0.033 mm distinguish precision pneumatic instruments, surface roughness instrument and endoscope testing
See More

Wearever – Remanufactured Brake Master Cylinder (Part No.11-3477)

Remanufactured Brake Master Cylinder

from

$115.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders.

Product Features:
  • Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
  • Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
  • Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
  • Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
  • Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
  • Plastic reservoirs are vacuum-tested to ensure they are leak free.
See More

Carquest Wearever – Brake Master Cylinder MCA39882: New, With Reservoir (Part No.MCA39882)

Brake Master Cylinder MCA39882: New, With Reservoir

from

$79.99
Assemblies match what was originally installed on the car from OE for quality, fit, function and material.

Product Features:
  • Rubber components independently tested and certified by approved labs globally to meet extreme (hi and low) temperatures.
  • Master cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
  • All aluminum castings are “hard anodized”
  • All iron castings are coated to prevent rust
  • Manufacturers all major components in house.
  • Most brake masters ship with OE size/shape reservoirs, floats, switches, sensors and valves to match original OE assembly.
  • All machining done by computer programed CNC machines.
  • Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.
  • Before assembly all castings and components are cleaned by automated ultrasonic cleaning machines
  • Assembly is done in clean room insuring no contamination is introduced into final assembly.
  • All assemblies are dated coded for 100% accurate trace-ability.
  • Every assembly is pressure tested before being shipped insuring dependable operation and leak-free performance
See More

Carquest Wearever – New Brake Master Cylinder: With Reservoir, Exact Fit, 0.813" Bore (Part No.MCA630604)

New Brake Master Cylinder: With Reservoir, Exact Fit, 0.813" Bore

from

$147.99
This brake master cylinder is precision-engineered to match the design, function, and performance of the original master cylinder on specific vehicle years, makes and models. It is made of new, high-quality materials for a safe, durable replacement.

Product Features:
  • Precise replacement – cylinder housing is constructed to match the casting material of the original part and ensure similar performance
  • Durable design – all rubber components are made of high-quality EPDM compound for resistance to glycol-based brake fluid
  • 100% new – made entirely of new materials, not remanufactured, to ensure highest quality and safety
  • Strict specifications – made to meet rigorous SAE International standards
See More

Wearever – Remanufactured Brake Master Cylinder (Part No.11-2571)

Remanufactured Brake Master Cylinder

from

$35.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders.

Product Features:
  • Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
  • Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
  • Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
  • Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
  • Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
  • Plastic reservoirs are vacuum-tested to ensure they are leak free.
  • Plastic reservoirs are 100% vacuum-tested to ensure proper function
See More

Carquest Wearever – Brake Master Cylinder MCA39970: New, With Reservoir (Part No.MCA39970)

Brake Master Cylinder MCA39970: New, With Reservoir

from

$83.99
Cylinder casting is constructed from high-quality cast iron or aluminum for long-lasting durability

Product Features:
  • All rubber parts are of high-quality EPDM compound for resistance to DOT3 or DOT4 brake fluid
  • Key components like spring are from high and stable quality suppliers.
  • Products are machined by CNC machines with strictly quality control.
  • Parts assembled in a clean environment and all parts were thoroughly cleaned before assembly.
  • Direct replacement for a proper fit
  • Manufactured to strict engineering quality standards, meets S.A.E. specifications
  • Each product is 100% tested on production lines and sampling tested prior to shipment
  • Key working procedure used CNC, positioning accuracy ± 0.005/300 mm, repeat positioning accuracy + /-0.026 mm
  • Main cylinder hole of measured by the 0.022 mm distinguish precision pneumatic instruments, surface roughness instrument and endoscope testing
See More

World Brake Resources – WBR Brake Master Cylinder (Part No.N300053887WBR)

WBR Brake Master Cylinder

from

$108.91
WBR premium hydraulic brake cylinders are manufactured on state-of-the-art CNC machines, matching the exact OEM design with materials that meet the strict TS 16949 OEM certification. WBR brake master cylinders, wheel cylinders, clutch master and slave units use lightweight aluminum or cast iron to match the original design. The EPDM rubber used in WBR cylinders is a long-life formulation, 100% compatible with all types of brake fluid.

Product Features:
  • Manufactured on state-of-the-art CNC machines
  • OEM design and materials
  • TS 16949 OEM certification
  • 100% compatible with all types of brake fluid
See More

Upgrade your 1983 Honda Accord with Top-Quality Brake Parts

When it comes to maintaining or upgrading your 1983 Honda Accord, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Honda or enhancing its overall performance, Brake Parts are key to keeping your Accord functioning at its best. At Advance Auto Parts, we offer a wide selection of 6 Brake Parts for the 1983 Honda Accord, designed to meet your needs without breaking the bank. From Brake Master Cylinder replacements to Brake Pads and Shoes upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Brake Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Brake Parts for your 1983 Honda Accord at great prices. Our Brake Parts inventory for this model ranges from just $15.00 to $86.99, with an average price of $48.53. Our 6 Brake Parts in stock come from 3 trusted brands, so you’re sure to find the right part for your 1983 Honda Accord without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1983 Honda Accord, we stock popular OEM and aftermarket Brake Parts from top names like Carquest Dorman, and more. Carquest Brake Parts start at just $15.00 and boast an impressive 4 stars average rating from customers. With 168 customer reviews and counting, our 1983 Honda Accord Brake Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Brake Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1983 Honda Accord is always ready to roll. We’re committed to providing you with everything you need to keep your Accord in top shape, all in one place. Start shopping confidently below for your 1983 Honda Accord!

Best-Selling Brake Master Cylinders for 1983 Honda Accords

Enhance the driving experience in your Honda with 3 quality Brake Master Cylinder components, starting at $47.49.

Dorman – Help – Brake Fluid Reservoir Cap: Threaded, Provides Tight Seal, 1 Pack (Part No.42038)

Brake Fluid Reservoir Cap: Threaded, Provides Tight Seal, 1 Pack

from

$47.49
This brake master cylinder cap is designed to match the fit and function of the original cap on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this brake master cylinder cap is designed to match the fit and function of the original cap on specified vehicles.
  • Restores functionality – reliable replacement for an original part that is missing or failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Wearever – New Brake Master Cylinder: With Reservoir, Exact Fit, 0.813" Bore (Part No.MCA39426)

New Brake Master Cylinder: With Reservoir, Exact Fit, 0.813" Bore

from

$57.99
This brake master cylinder is precision-engineered to match the design, function, and performance of the original master cylinder on specific vehicle years, makes and models. It is made of new, high-quality materials for a safe, durable replacement.

Product Features:
  • Precise replacement – cylinder housing is constructed to match the casting material of the original part and ensure similar performance
  • Durable design – all rubber components are made of high-quality EPDM compound for resistance to glycol-based brake fluid
  • 100% new – made entirely of new materials, not remanufactured, to ensure highest quality and safety
  • Strict specifications – made to meet rigorous SAE International standards
See More

Dorman – Master Cylinder Reservoir Cap (Part No.N3030290855DOR)

Master Cylinder Reservoir Cap

from

$58.19
Dorman’s Brake Master Cylinder Caps are engineered for affordability and convenience. Save time, money and labor by replacing only the Cap, instead of the entire Brake Master Cylinder.

Product Features:
  • Constructed of high-quality plastic for lasting durability
  • Available in diverse styles, including threaded and locking
  • Protects braking system by providing a tight seal against the elements
  • A necessary safety item – prevents brake fluid from splashing and/or leaking
See More

Most Popular 1983 Honda Accord Brake Pads and Shoes

Customize your Honda with 2 Brake Pads and Shoes products like Front Brake Pads and Shoes and Rear Brake Pads and Shoes, all priced under $25.49.

Carquest Wearever – Brake Shoes (Part No.S576)

Brake Shoes

from

$25.49
Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime.  Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.

Product Features:
  • Wearever Brake Shoes come bonded or riveted based on OE design. 
  • Wearever Brake Shoes are coated to prevent rust.
  • Wearever Brake Shoes are 100% New not remanufactured.
  • Brand may vary by location
See More

Carquest Standard – RK PAD-SLV SEMI-MET (Part No.MKD223)

RK PAD-SLV SEMI-MET

from

$15.00
Product Features:
  • Dependable stopping power
  • Single layer shim for quiet braking
See More

Top Picks for 1983 Honda Accord Brake Boosters

Upgrade Honda Accords with top-quality Brake Boosters parts, including 1 OEM and aftermarket selections for your 1983 model.

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-5410)

Vacuum Brake Booster: Without Master Cylinder

from

$86.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:
  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • All units are 100% tested to ensure reliable performance.
  • Guaranteed fit and function.
See More

Top-Rated Brake Parts Brands For Your 1983 Honda Accord

Shop for the best-rated brands offering Brake Parts and other products for your 1983 Honda Accords. Below you’ll find some of our best rated Brake Parts from Carquest and Dorman, and more. Brake Parts from these brands that fit a 1983 Accord start at just $15.00 and are rated as high as 4 stars. OEM and aftermarket Brake Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Carquest 1983 Honda Accord Brake Parts

When it comes to maintaining or upgrading your 1983 Honda Accord, using quality Brake Parts is essential to ensure durability and a perfect fit. Carquest ticks all of those boxes. We offer a wide selection of Carquest Brake Parts, specifically designed for the 1983 Honda Accord. With over 3 Carquest brand Brake Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $15.00, with an average price of just $32.83. Plus, with over 55 customer reviews and an average rating of 4 stars, you can trust that our Carquest Brake Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

RK PAD-SLV SEMI-MET
from
$15
This product is not rated

RK PAD-SLV SEMI-MET

“”

New Brake Master Cylinder: With Reservoir, Exact Fit, 0.813" Bore
from
$57.99
This product is not rated

New Brake Master Cylinder: With Reservoir, Exact Fit, 0.813" Bore

“”

Brake Shoes
from
$25.49

(55)

Brake Shoes

“Nice brakes[…]”

Popular Dorman 1983 Honda Accord Brake Parts

Dorman auto parts is one of the highest quality Brake Part brands in the market. Any 1983 Honda Accord owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 1983 Accord, Advance Auto Parts carries a full inventory of 2 Dorman Brake Parts. Plus you will be keeping your Honda in peak condition while saving money because prices on these Dorman Brake Parts range from $47.49 to $58.19, plus, with more than 1 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Brake Parts below will deliver on both quality and value.

Master Cylinder Reservoir Cap
from
$58.19
This product is not rated

Master Cylinder Reservoir Cap

“”

Brake Fluid Reservoir Cap: Threaded, Provides Tight Seal, 1 Pack
from
$47.49

(1)

Brake Fluid Reservoir Cap: Threaded, Provides Tight Seal, 1 Pack

“My daughter’s Honda CRV’s brake light came on, would not reset, even after topping off the fluid reservoir and wiping the cap’s float clean. The parki”

FAQs for 1983 Honda Accord Brake Parts

Which Brake Parts are best-sellers for 1983 Honda Accords?

Out of 6 Brake Parts that fit 1983 Honda Accords, the following parts are the top sellers:

What’s the price range for 1983 Honda Accord Brake Parts?

Brake Part prices for the 1983 Honda Accord start at $15.00 and go up to $86.99 for the most premium parts.

What’s the average price of a Brake Part for a 1983 Honda Accord?

The average price for Brake Parts for the 1983 Honda Accord is $48.53. Keep in mind the variety of part types within our Brake Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Brake Parts for other Honda Accord model years?

Yes, we currently carry Brake Parts for 49 model years of Honda Accords between 1976 and 2025. Brake Parts are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Brake Parts for my 1983 Honda Accord?

The cheapest 1983 Honda Accord Brake Parts we carry in stock are:

What are the top-rated Brake Parts that fit the 1983 Honda Accord?

Out of 168 reviews by customers, our 1983 Honda Accord Brake Parts have an average customer rating of . These are some of the highest-rated Brake Part types for the 1983 Honda Accord and their top-rated products:

  • Brake Pads and Shoes
  • Brake Master Cylinders

What types of Brake Parts do you sell for my 1983 Honda Accord?

Can I get help with 1983 Honda Accord Brake Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Honda Brake Parts and more.

What is your return policy for Honda Accord Brake Parts?

Advance Auto Parts keeps returns simple. For new Honda Accord Brake Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.