1983 GMC P3500 Performance and Racing Products
Find Your Specific 1983 GMC P3500 Performance and Racing Products
Below you will find various in-demand GMC Performance and Racing Products, components and accessories for your 1983 P3500. Advance Auto Parts has popular P3500 parts like Performance Oil Filters, Performance Fuel Systems, Performance Engines and more. You’ll also find aftermarket and OEM Performance and Racing Products for other P3500 model years including
1991,
1992,
1993,
1994,
1995,
1996,
1997,
1998,
1999 and more. Select a category of 1983 GMC P3500 Performance and Racing Products below and start saving instantly.
Popular 1983 GMC P3500 Performance and Racing Products Categories
Essential Performance and Racing Products for 1983 GMC P3500s
FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2918)
from
$43.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
- Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
- Not intended for use in emission controlled vehicles.
B & M – Torque Converter, Nitrous Holeshot 3600 (Part No.20482)
from
$749.99
Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.
Product Features:
See More
Product Features:
- 3400-3800 RPM
- Small And Big Blocks
- Serious Performance
- Furnace Brazed
- Fully Balanced
FEL-PRO Performance – Lower Intake Manifold Gasket Set: 9 Piece Set (Part No.1212)
from
$27.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Accel – Ignition/Electrical (Part No.130120)
from
$16.99
ACCEL Hi-Performance rotors offer superior protection from arc-thru and crossfire. Features hi-performance 60,000 volt alkyd compound, stress-relieved at molding to ensure stability and resist centrifugal forces at high racing RPMs.
Product Features:
See More
Product Features:
- Max stability for all RPM ranges
- Heavy duty for maximum energy transfer
Competition Cams – High Energy Aluminum 1.7 Ratio Roller Rocker Set for BBC 396-454 w/ 7/16" Stud (Part No.17021-16)
from
$270.99
These High Energy Die Cast Aluminum Roller Rocker Arms for Chevy V8 396-454 applications are perfect for street and moderate race use. With a 7/16″ stud diameter and 1.7 ratio, the die cast, larger-than-stock body of the rocker arms is made of aluminum for superior strength with light overall weight. High Energy Die Cast Aluminum Roller Rocker Arms from COMP Cams are an affordable option that feature a die cast, aluminum body with a needle bearing fulcrum and roller tip. Designed to be stiffer and more durable, these cost effective rocker arms are capable of providing added valve lift while withstanding the rigors of a performance application. Their specially engineered fulcrum and roller tip create far less friction than sliding factory models to lower oil temperatures, thus improving both response and horsepower. Snap rings are used to hold the trunion and bearings locked in place.
Product Features:
See More
Product Features:
- Cost effective aluminum construction provides superior strength to weight ratio
- Needle bearing fulcrum and roller tip reduce friction and lower oil temperatures for improved response and horsepower
- Durable design increases valve lift while withstanding the rigors of moderate race use
- Die-formed aluminum body is larger than stock, and may require modifications to stock valve covers for clearance.
Mr. Gasket – Intake Manifold Bolts (Part No.957G)
from
$29.99
These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes sixteen (16) 3/8 inch-16 x 1-1/4 inch bolts & washers
Product Features:
See More
Product Features:
- Zinc plated Grade 5 steel
- Flat washers provide uniform clamp load and prevent galling on aluminum intake manifolds
- Ideal For Minimal Space
- 12-Point Head And Flange
- Zinc Plated For Protection
FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1010)
from
$51.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
- NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
- SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
- STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
NOS/Nitrous Oxide Systems – Diesel; Nitrous System (Part No.02519NOS)
from
$1049.99
If you think the torque of that monster diesel is something to brag about then you should feel it with the extra power of NOS. This kit works with stock and modified applications. Vehicles with computer upgrades will benefit even more as nitrous will aid in a clean combustion. Comes complete with 10 pound bottle, bottle brackets, nitrous feed line, large nitrous solenoid, electrical wiring and complete instructions.
Product Features:
See More
Product Features:
- Provides Additional Air Your Diesel Wants
- Additional 50 HP
- w/No Fuel System Or Electronic Upgrades
- Complete Kit For Easy Installation
B & M – Flexplate, SFI 29.1 Approved, Fits 168-Tooth, 2-Piece Rear Main Seal, Chevy V8 (Part No.20230)
from
$169.99
As performance levels increase, an O.E. style flexplate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for 1955-85 GM small block (internally balanced) V8 engines along with 4.3L V6 engines. Also fits 1990 and earlier GM big block (internally balanced) V8 engines with two piece rear main seal. Features include high tensile strength steel construction to resist elongation and cracking, dual bolt pattern 10.75 or 11.5 inch converter mounting locations, 168 tooth ring gear with double-sided welds for added strength and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953. Compatible with Powerglide, TH350, TH400 and TH700R4 automatic transmissions.
Product Features:
See More
Product Features:
- NHRA/IHRA Legal For All Classes
- Includes SFI Certification Sticker
- Ideal For Street Applications
- To Extreme Duty Racing
- To High RPM Use
Competition Cams – Magnum/Oval Track 244/244 Hydraulic Flat Cam (Part No.11-213-3)
from
$259.99
HYDRAULIC – Magnum: Street/strip applications. 10:1+ compression, 3000+ stall or 4 speed. 4.10 or lower gears and aftermarket intake. Very rough idle. OR Oval Track: Good for hobby stock in 454 where hydraulic lifters must be used.
Product Features:
See More
Product Features:
- HYDRAULIC – Magnum: Street/strip applications. 10:1+ compression, 3000+ stall or 4 speed. 4.10 or lower gears and aftermarket intake. Very rough idle. OR Oval Track: Good for hobby stock in 454 where hydraulic lifters must be used.
- 292/292 Advertised Duration, 244/244 Duration @ .050″, .550″/.550″ Lift, 110 Lobe Separation
- Valve spring upgrade required
- Can be used with mild ratio rocker arms and traditional performance valve springs.
Competition Cams – High Energy 206/206 Hydraulic Flat Cam/Lifter Kit (Part No.CL11-202-3)
from
$635.99
Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications.
Product Features:
See More
Product Features:
- Good blend of efficiency and performance.
- Perfect choice for performance street rebuilds.
- Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1606)
from
$29.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
- Not intended for use in emission controlled vehicles.
Holley – Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-80670)
from
$682.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Accel – Cap/Rotor (Part No.8129)
from
$65.99
ACCEL cap and rotor kits offer superior protection from “arc-thru” and crossfire. Features 60k V-rated alkyd compound, stress-relieved at molding to ensure stability. Brass inserts and steel rotor springs provide for high spark energy flow.
Product Features:
See More
Product Features:
- See catalog for application information
- Features 60K V Rated Alkyd Compound
Holley – High-Flow Mechanical Fuel Pump for Street Performance (Part No.12-834)
from
$138.99
Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.
Product Features:
See More
Product Features:
- Street Performance
- Flows 80 gph Free Flow
- Shutoff Pressure Pre-Set 7.5 PSI
- Fuel Pressure Regulator Is Not Required
- Heavy Duty Construction For Continuous High rpm Operation
- Fuel Body Casting Can Be Rotated For Plumbing Situations
- Inlet And Outlet Tapped For 1/4 in. NPT
- Inlet/Outlet Tapped For .25 in. NPT
FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1819)
from
$31.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
- With steel core to provide ultimate excellent blowout resistance.
- Not intended for use in emission controlled vehicles.
Edelbrock – C-357-B Triple-Deuce Intake Manifold for 1955-86 262-400 c.i.d. SB Chevys (Part No.5418)
from
$540.99
Edelbrock part #5418 C-357-B Triple-Deuce intake manifold is designed for 1955-86 262-400 c.i.d. small-block Chevys, this manifold has a balanced 180-degree firing order port runner arrangement. It contains an exhaust gas heat crossover and offers excelle
Product Features:
See More
Product Features:
- Idle-5500 RPM Range
- Dual Plane Type 6-Pack Style Flange
- 3.77 in. Front Height, 4.35 in. Center Height, 4.88 in. Rear Height
- Satin Finish
- Non-EGR
Mr. Gasket – Thermocap Radiator Cap (Part No.2470B)
from
$54.99
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.
Product Features:
See More
Product Features:
- Indicates coolant temperature
- Helps prevent coolant injuries
- Fahrenheit and centigrade readings
- Color-coded temperature ranges
- Integrated coolant reclamation valve
- Improves under-hood appearance
- Chromed crown with a colored trim ring
B & M – Automatic Shifter, Light Truck Megashifter (Part No.80680)
from
$527.99
The B&M Megashifter has it all, form, function and classic style. This all adds up to bring you a quality shifter that’s been one of the most popular automatic shifters of all time. The light truck Megashifter is better suited for truck and bench seat applications with its overall height of 14.85-inches tall (2.25-inches taller than #80690 Megashifter.) The positive ratcheting action won’t allow you to over-shift and miss a gear at that critical moment, along with the reverse lockout feature meets NHRA/IHRA safety rules for those weekend grudge races at the track, while the look and feel of the T-handle and accordion style shift boot really shows off its racing heritage. Other features include a black console that you can trim to match the contour of your vehicle’s floor, 5-foot long shifter cable, cable brackets, transmission shift levers, chrome plated top plate with lighted gear indicator and everything needed for an easy at home installation. An optional T-handle with a 12-volt button is available separately for actuating a trans-brake, nitrous oxide or other accessories for the hard-core performance enthusiast. This shifter fits most popular Chrysler, Ford and GM 3 and 4-speed automatic transmissions. Note: AOD transmissions require optional kit #40496, GM 4L60E through 4L85E transmissions with PRNDL switch will require optional kit #70499. Overall Dimensions – 14.9L x 6.4W x 14.8H
Product Features:
See More
Product Features:
- Universal Floor Mount Application
- Cable Operated
- Quick Installation
- Accurate Shifting
- NHRA/IHRA Reverse Lockout Meets Requirements
- Use w/Reverse Pattern Valve Body
- Includes Neutral Safety Switch
- Includes Backup Light Switch
FEL-PRO Performance – Engine Timing Cover Gasket (Part No.2335)
from
$21.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Steel core gasket construction
- Exclusive design permits significantly faster gasket installation while eliminating potential sealing leak paths.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1411)
from
$42.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1448)
from
$35.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Energy Suspension – Sway Bar Bushing Set (Part No.3.5148G)
from
$48.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-1001)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-3003)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
Mallory – Unilite Ignition Module (Part No.605)
from
$92.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$199.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Mallory – Distributor Wiring Harness (Part No.29349)
Upgrade your 1983 GMC P3500 with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1983 GMC P3500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Performance and Racing Products are key to keeping your P3500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 101 Performance and Racing Products for the 1983 GMC P3500, designed to meet your needs without breaking the bank.
From
Performance Oil Filter
replacements to
Performance Fuel Systems
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1983 GMC P3500 at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $16.99 to $1,545.99, with
an average price of $412.48.
Our 101 Performance and Racing Products in stock come from 12 trusted brands, so you’re sure to find the right part for your 1983 GMC P3500 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1983 GMC P3500, we stock popular OEM and aftermarket Performance and Racing Products from top names
like FEL-PRO Performance, B & M, Competition Cams, and more.
FEL-PRO Performance Performance and Racing Products
start at just $31.49 and boast an impressive 4.2 stars average rating from customers.
B & M and Competition Cams also bring quality to the table, with Performance and Racing Products available starting at $340.99, and at an average 4.1 stars rating.
With 294 customer reviews and counting, our 1983 GMC P3500 Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1983 GMC P3500 is always ready to roll. We’re committed to providing you with everything you need to keep your P3500 in top shape, all in one place.
Start shopping confidently below for your 1983 GMC P3500!
Best-Selling Performance Oil Filters for 1983 GMC P3500s
Enhance the driving experience in your GMC with 3 quality Performance Oil Filter components, starting at $16.99.
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-3003)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
Fram – Engine Oil Filter: Full-Flow Lube Spin-On (Part No.HP4)
from
$16.99
FRAM Racing filters are designed with a heavy-gauge tapping plate and an extra-thick steel can that is able to withstand the high pressure flexing caused by demanding driving conditions. A spiral-shaped center tube provides protection against collapse, and tough steel end caps add even more durability. A screen-over 22PSI filter bypass valve provides additional protection against larger contaminants.
Product Features:
See More
Product Features:
- Proven protection for up to 10,000 miles
- Engineered for use with synthetic or conventional motor oils
- Filter media is a blend of fiber and resin that captures 95% of the dirt particles
- The perfect balance of dirt-trapping efficiency and dirt-holding capacity
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-3002)
from
$18.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
Most Popular 1983 GMC P3500 Performance Fuel Systems
Customize your GMC with 6 Performance Fuel Systems products
like Performance Fuel Pumps and
Performance Carburetors, all
priced under $699.99.
Holley – Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (Part No.0-80457S)
from
$499.99
Holley’s new 0-80457SA is constructed from aluminum which compared to its zinc counterpart equates to a weight savings of 40%! Holley’s aluminum 0-80457SA will hold its shine longer and also can be hand polished for a custom look! Its 600 CFM of airflow,
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
Holley – High-Flow Mechanical Fuel Pump for Street Performance (Part No.12-834)
from
$138.99
Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.
Product Features:
See More
Product Features:
- Street Performance
- Flows 80 gph Free Flow
- Shutoff Pressure Pre-Set 7.5 PSI
- Fuel Pressure Regulator Is Not Required
- Heavy Duty Construction For Continuous High rpm Operation
- Fuel Body Casting Can Be Rotated For Plumbing Situations
- Inlet And Outlet Tapped For 1/4 in. NPT
- Inlet/Outlet Tapped For .25 in. NPT
Holley – Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-80670)
from
$682.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Holley – Prem Street Carbs (Avengers) (Part No.0-80870)
from
$699.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Holley – Prem Street Carbs (Avengers) (Part No.0-80570)
from
$699.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet-Flow Tested To Assure It Arrives Ready To Run
- Street Ready; Out Of The Box
Holley – Keith Dorton Series; VoluMax Race Series Fuel Pump (Part No.12-327-20)
from
$226.99
Keith Dorton Series VoluMax race series fuel pump made from heavy duty construction for continuous high RPM operation. Redesigned high flow valves always ensure adequate fuel delivery. Fuel pressure regulator is required. Fuel body casting can be rotated
Product Features:
See More
Product Features:
- High Output Fuel Flow
- Flows 170 gph Free Flow
- Shutoff Pressure Pre-Set At 8 PSI
- Fuel Pressure Regulator Required Recommend P/N 12-704
- Heavy Duty Construction For Continuous High rpm Operation
- Redesigned High Flow Valves Ensure Adequate Fuel Delivery
- Fuel Body Casting Can Be Rotated For Plumbing Situations
- 3/4in.-16 Inlet And Outlet Ports
Top Picks for 1983 GMC P3500 Performance Engines
Upgrade GMC P3500s with top-quality Performance Engines parts, including 74 OEM and aftermarket selections for your 1983 model.
FEL-PRO Performance – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.1003)
from
$42.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
- NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
- SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
- STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1004)
from
$44.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
- Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
- Raises combustion sealing force to roughly three times that of standard head gaskets.
- Steel wire rings for the greatest combustion seal strength.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1037)
from
$64.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
- NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
- SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
- STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1603)
from
$31.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2918)
from
$43.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
- Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – PERFORMANCE VALVE COVER GASKET SET (Part No.1602)
from
$23.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Die cut silicone rubber gaskets conform to out-of-flat covers
- Great for on-again/off-again situations
- Not intended for use in emission controlled vehicles.
Competition Cams – High Energy 218/218 Hydraulic Flat Cam/Lifter Kit (Part No.CL11-205-3)
from
$637.99
BIG BLOCK CHEVY HYDRAULIC CAM AND LIFTER KIT – High Energy: Performance with slight rough idle in 396. Great for heavy towing in 454 c.i.
Product Features:
See More
Product Features:
- Cam and lifter kit for Big Block Chevy engines
- CL-Kit includes cam, lifters, assembly lube, instructions and decals
- HYDRAULIC – High Energy: Performance with slight rough idle in 396. Great for heavy towing in 454 c.i.
- 268/268 Advertised Duration, 218/218 Duration @ .050″, .485″/.485″ Lift, 110 Lobe Separation
B & M – Tork Master 2400 (Part No.20404)
from
$373.99
Torque Converter – Tork Master 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost performance torque converter. The Tork Master is an excellent all-around performance street converter. The best value priced street converters available, Tork Master converters come with a new precision pump drive tube and all are pressure tested and fully balanced. The Tork Master torque converter is not recommended for big block or supercharged applications. New alloy steel pump drive tube. Needle thrust bearing when factory equipped. New thrust washer between turbine and cover when required. Due to torque converter core availability, the actual converter size may vary but performance functionality will be as advertised.
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
Competition Cams – Big Mutha’ Thumpr 243/257 Hydraulic Flat Cam/Lifter Kit (Part No.CL12-602-4)
from
$914.99
SMALL BLOCK CHEVY HYDRAULIC CAM AND LIFTER KIT – Big Mutha’ Thumpr: Street/strip, needs 9.5:1 compression, 2800+ stall, intake, gears and headers, very rough idle.
Product Features:
See More
Product Features:
- Cam and lifter kit for Small Block Chevy engines
- CL-Kit includes cam, lifters, assembly lube, instructions and decals
- HYDRAULIC – Big Mutha’ Thumpr: Street/strip, needs 9.5:1 compression, 2800+ stall, intake, gears and headers, very rough idle.
- 295/313 Advertised Duration, 243/257 Duration @ .050″, .500″/.486″ Lift, 107 Lobe Separation
- Valve spring upgrade required
Competition Cams – High Energy/Marine 218/218 Hydraulic Flat Cam/Lifter Kit (Part No.CL12-210-2)
from
$898.99
SMALL BLOCK CHEVY HYDRAULIC CAM AND LIFTER KIT – High Energy: Good street performance with stock converter, choppy idle. OR High Energy Marine: Biggest cam for inboard/outboard. Good for ski, economy and light performance.
Product Features:
See More
Product Features:
- Cam and lifter kit for Small Block Chevy engines
- CL-Kit includes cam, lifters, assembly lube, instructions and decals
- HYDRAULIC – High Energy: Good street performance with stock converter, choppy idle. OR High Energy Marine: Biggest cam for inboard/outboard. Good for ski, economy and light performance.
- 268/268 Advertised Duration, 218/218 Duration @ .050″, .454″/.454″ Lift, 110 Lobe Separation
- Valve spring upgrade required
Competition Cams – Xtreme Energy 212/218 Hydraulic Flat Cam (Part No.11-234-3)
from
$259.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,
Product Features:
See More
Product Features:
- Excellent performance in street carbureted applications.
- More vacuum allows an increase in duration for improved performance and assists power brakes.
- Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
Competition Cams – Magnum 253/253 Hydraulic Flat Cam (Part No.11-214-4)
from
$291.99
An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts.
Product Features:
See More
Product Features:
- Best with aftermarket torque converters and 9.5:1 compression.
- Great high RPM power.
- Easy on valve train parts.
- Can be used with mild ratio rocker arms and traditional performance valve springs.
FEL-PRO Performance – Lower Intake Manifold Gasket Set: 9 Piece Set (Part No.1212)
from
$27.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1884 R)
from
$65.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Rigid core, molded silicone rubber gaskets utilize the one-piece molded rubber technology for a perfect fit, ease of installation and include compression limiters to prevent overtightening.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1010)
from
$51.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
- NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
- SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
- STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1640)
from
$22.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1819)
from
$31.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
- With steel core to provide ultimate excellent blowout resistance.
- Not intended for use in emission controlled vehicles.
Mr. Gasket – Intake Manifold Bolts (Part No.957G)
from
$29.99
These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes sixteen (16) 3/8 inch-16 x 1-1/4 inch bolts & washers
Product Features:
See More
Product Features:
- Zinc plated Grade 5 steel
- Flat washers provide uniform clamp load and prevent galling on aluminum intake manifolds
- Ideal For Minimal Space
- 12-Point Head And Flange
- Zinc Plated For Protection
FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1605)
from
$25.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Die cut silicone rubber gaskets conform to out-of-flat covers
- Great for on-again/off-again situations
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Engine Timing Cover Gasket (Part No.2335)
from
$21.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Steel core gasket construction
- Exclusive design permits significantly faster gasket installation while eliminating potential sealing leak paths.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Performance Cylinder Head Gasket (Part No.1025)
from
$74.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions.
Product Features:
See More
Product Features:
- Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
- Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
- Raises combustion sealing force to roughly three times that of standard head gaskets.
- Steel wire rings for the greatest combustion seal strength.
- Not intended for use in emission controlled vehicles.
B & M – Performance Torque Converter for GM TH400, 350, & 375 Transmissions (Part No.20400)
from
$329.99
Torque Converter – Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
Competition Cams – Xtreme Energy 230/236 Hydraulic Flat Cam (Part No.12-246-3)
from
$258.99
HYDRAULIC – Xtreme Energy: Very strong mid-range torque and throttle response, 2200+ stall.
Product Features:
See More
Product Features:
- HYDRAULIC – Xtreme Energy: Very strong mid-range torque and throttle response, 2200+ stall.
- 274/286 Advertised Duration, 230/236 Duration @ .050″, .490″/.490″ Lift, 110 Lobe Separation
- Valve spring upgrade required
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
Competition Cams – Magnum 224/224 Hydraulic Flat Cam (Part No.12-211-2)
from
$254.99
HYDRAULIC – Magnum: High performance. Biggest cam with stock converter but better with 2000+ stall. Use lower gears. Mild rough idle.
Product Features:
See More
Product Features:
- HYDRAULIC – Magnum: High performance. Biggest cam with stock converter but better with 2000+ stall. Use lower gears. Mild rough idle.
- 270/270 Advertised Duration, 224/224 Duration @ .050″, .470″/.470″ Lift, 110 Lobe Separation
- Valve spring upgrade required
- Can be used with mild ratio rocker arms and traditional performance valve springs.
In-Demand Performance Exhaust Products for 1983 GMC P3500s
Select from 4 premium Performance Exhaust Products parts for your 1983 GMC P3500, with prices ranging from $31.49 to $42.99.
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1444)
from
$31.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1411)
from
$42.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1410)
from
$37.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1448)
from
$35.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Most Sold 1983 GMC P3500 Performance Ignition Products
Explore our best-selling GMC parts for the 1983 P3500 among 3 OEM and aftermarket options starting from $33.99.
Mallory – Unilite Ignition Module (Part No.605)
from
$92.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Mallory – Distributor Wiring Harness (Part No.29349)
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$199.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Top-Rated Performance and Racing Products Brands For Your 1983 GMC P3500
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1983 GMC P3500s. Below you’ll find some of our best rated Performance and Racing Products from FEL-PRO Performance, B & M, and Competition Cams, and more. Performance and Racing Products from these brands that fit a 1983 P3500 start at just $31.49 and are rated as high as 4.2 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular FEL-PRO Performance 1983 GMC P3500 Performance and Racing Products
When it comes to maintaining or upgrading your 1983 GMC P3500, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. FEL-PRO Performance ticks all of those boxes. We offer a wide selection of FEL-PRO Performance Performance and Racing Products, specifically designed for the 1983 GMC P3500. With over 3 FEL-PRO Performance brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $31.49, with an average price of just $39.66. Plus, with over 4 customer reviews and an average rating of 4.2 stars, you can trust that our FEL-PRO Performance Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Popular B & M 1983 GMC P3500 Performance and Racing Products
B & M auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1983 GMC P3500 owner should feel confident when installing genuine B & M parts in their vehicle. To ensure the best fit and performance for your 1983 P3500, Advance Auto Parts carries a full inventory of 3 B & M Performance and Racing Products. Plus you will be keeping your GMC in peak condition while saving money because prices on these B & M Performance and Racing Products range from $340.99 to $527.99, plus, with more than 3 customer reviews and an impressive 4.1 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$527.99
(1)
Automatic Shifter – Megashifter – Universal
“its was pretty easy to install if u have any type of knowlegde of cars it should not be difficult at all and the shifting is awesome just be careful w”
from
$373.99
(1)
Tork Master 2400
“The B&M 2400 stall converter was a great choice for my application. It works well on the street and track, increased performance by leaps and bounds. ”
from
$340.99
(1)
Automatic Shifter, StarShifter
“while I was looking this shifter over and found it wouldn’t work for my application, I found it to be as beautiful as the B&M shifter I had in my othe”
FAQs for 1983 GMC P3500 Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1983 GMC P3500s?
Out of 101 Performance and Racing Products that fit 1983 GMC P3500s, the following parts are the top sellers:
- Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (6120022) – $18.99
- Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (17402826) – $17.99
- Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (5189543) – $42.49
What’s the price range for 1983 GMC P3500 Performance and Racing Products?
Performance and Racing Product prices for the 1983 GMC P3500 start at $16.99 and go up to $1,545.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1983 GMC P3500?
The average price for Performance and Racing Products for the 1983 GMC P3500 is $412.48. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other GMC P3500 model years?
What are the cheapest Performance and Racing Products for my 1983 GMC P3500?
The cheapest 1983 GMC P3500 Performance and Racing Products we carry in stock are:
- Engine Oil Filter: Full-Flow Lube Spin-On (5140552) – $16.99
- Ignition/Electrical (17370034) – $16.99
- Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (17402826) – $17.99
- Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (6120022) – $18.99
- Engine Timing Cover Gasket (21021905) – $21.99
What are the top-rated Performance and Racing Products that fit the 1983 GMC P3500?
Out of 294 reviews by customers, our 1983 GMC P3500 Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1983 GMC P3500 and their top-rated products:
- Performance Ignition Products
- Unilite Ignition Module (17350025) – $92.99
- Performance Oil Filters
- Unilite Ignition Module (17350025) – $92.99
What types of Performance and Racing Products do you sell for my 1983 GMC P3500?
As of 11/2/25, these are some of the most in-demand types of Performance and Racing Products for a 1983 GMC P3500:
Can I get help with 1983 GMC P3500 Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Performance and Racing Products and more.
What is your return policy for GMC P3500 Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new GMC P3500 Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
