1983 Dodge D350 Body Parts

Essential 1983 Dodge D350 Body Parts

Dee Zee – DogBx (Part No.DZ91782)

DogBx

from

$309.99
DogBx

Dee Zee – Powder Coated, Black, Steel, Unlighted, Requires Running Board Mounting Kit (Part No.DZ15301S)

Powder Coated, Black, Steel, Unlighted, Requires Running Board Mounting Kit

from

$326.99
Dee Zee Rough Step – Industrial gauge steel coated in Dee Zeeblack NRT (No Rust Technology) powder coat to increase corrosion resistance. Industrial grating step provides extra traction getting in and out of the vehicle while allowing mud, water, snow, and ice to drain off the stepping area.

Product Features:
  • No Rust Technology Powder Coat Is A Specially Designed To Increase Corrosion Protection
  • Industrial Grating Step Provides Extra Traction Getting In And Out Of The Vehicle While Allowing Mud, Water, Snow, And Ice To Drain Off The Stepping Area
  • Rugged 12 Gauge Steel Construction
  • Protective Black Powder Coat Finish
  • Grated Steel Top Provides Unmatched Traction
See More

Metro Mould – Door Seal (Part No.IS-LM 123)

Door Seal

from

$166.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Door Seal (Imported). Replaces OEM #55023781. Fits either side. 160 In. Long. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dual durometer rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
See More

Dee Zee – 11"X 19 Inch, Set of 2, Rectangle With Radius Notch, Aluminum, Screw On (Part No.DZ1808)

11"X 19 Inch, Set of 2, Rectangle With Radius Notch, Aluminum, Screw On

from

$39.49
Dee Zee Flaps Protect your vehicle and trailer from rocks and messy conditions. Wider than most brands for maximum protection. Constructed of powder coated Brite-Tread aluminum.

Product Features:
  • Protect Your Vehicle And Trailer From Rocks And Messy Conditions
  • Classic Diamond Style Design
  • Protected By A BriteGard Powder Coat Finish
  • Compliment Brite-Tread Running Boards
See More

Dorman – No. 8 Screw Size Nylon Nut 5/16 In. Hole (Part No.963-128D)

No. 8 Screw Size Nylon Nut 5/16 In. Hole

from

$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Westin – SureStep Universal Rear Bumper (Part No.21007)

SureStep Universal Rear Bumper

from

$669.99
Fey Sure-Step Deluxe Bumpers are non-OE design bumpers with a full size tongue weight of 800 lbs and 8,000 lbs trailer weight. Sure-Step Deluxe bumpers are for full size trucks and offer a molded polymer step surface for truck owners. Product available in

Product Features:
  • Cold Rolled Brite Steel
  • OE Style Steel Step Plate
  • Molded Polymer Surface
  • Mount Kit Sold Separately
  • Molded Flange
  • 3 Year Warranty
See More

Dee Zee – Chest, Single Lid, Diamond Tread, Silver, Aluminum, 56" L X 19" W X 16" H (Part No.DZ8556F)

Chest, Single Lid, Diamond Tread, Silver, Aluminum, 56" L X 19" W X 16" H

from

$553.99
Dee Zee Red Label Chest is the perfect solution. Constructed of heavy duty Brite-Tread aluminum it can take a serious amount of abuse. A crown style lid with a full pan double-V stiffener offers superior rigidity for whatever you decide throw at it. Lockable stainless steel paddle handles keep your items safe and secure from the types of people your mother warned you about. Dampened gas shocks and adjustable strikers keep lid operation smooth and effortless. What good is a utility chest if it turns into a kiddie pool every time it rains. that is why we fortify our Red Label Series with closed cell foam gasket to keep outside elements where they belong. Our Red Label Utility Chest is forged out of non-rusting .056 Brite-Tread aluminum using internal bends for superior strength to create a box that can withstand years of abuse.

Product Features:
  • Paddle Handles With Guide Plate- Lockable, Stainless Steel Handles
  • Lockable Stainless Steel Paddle Handle Latch
  • Slanted Front To Avoid The Wheel Wells Or Traditional Square
  • Closed Cell Foam Gaskets- Helps Keep The Elements Out Of The Box
  • Front, Back, And Bottom All One Piece For Increased Body Strength
  • Dampened Gas Shocks Open At A Steady, Controlled Rate And Removable Plastic Tool Tray To Keep Smaller Items Organized
  • Full Length Piano Hinge For Extra Strength
  • Front, Back And Bottom Are Bent From A Single Piece Of Aluminum
See More

Covercraft – Custom Hood Protector (Part No.45230-01)

Custom Hood Protector

from

$65.99
Custom Hood Protectors by Covercraft are a sporty accessory that protects your vehicle’s hood. Custom made to fit your specific vehicle. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. No need to remove it when wet. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. A CHP is a great alternative choice of protection from a full front-end cover. Unexpected road damage is inevitable. Great protection, great style, it’s the easiest way to keep your vehicle in pristine condition!

Product Features:
  • Protects vehicle’s hood from bugs or rock chips
  • Low profile, aerodynamic design
  • Installs in less than 5 minutes, no tools required
  • Custom fit exactly to your vehicle
  • Leather grain vinyl
See More

KAI – Wheel Arch Panel (Part No.RRP077)

Wheel Arch Panel

from

$69.99
New Standard Replacement Driver Side Upper Wheel Arch Patch, 31 1/2 X 16

Product Features:
  • 31 1/2 X 16, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Bed Panel Patch (Part No.GMK224451072L)

Bed Panel Patch

from

$89.99
New Goodmark Driver Side Rear Outer Floor Patch, 20 Inches Long X 10 Inches Wide, Made Of Steel

Product Features:
  • 20 Inches Long X 10 Inches Wide Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Covercraft – PRONET Tailgate Net (Part No.PN323)

PRONET Tailgate Net

from

$64.99
Prone is a high performance tailgate net that adds a sporty aerodynamic style to your truck and increases air flow through your truck bed. Prune’s are known to improve gas mileage by eliminating wind drag. Easily installs with four mounting holes, resulting in a perfectly flat, sag-free net. Complements and fits most pickups. Constructed from heavy duty 22 oz vinyl-coated polyester fabric with stainless steel mounting hardware for long lasting durability.

Product Features:
  • The Leader In Quality & Fit & Finish
  • Patented Sag-free Design
  • Only Four Holes Needed for Installation
  • Best Looking Even-Tensioning Design
  • ProRunner
  • 18 in height x 59.75 in width
See More

Westin – Universal Bumper Mount Kit (Part No.92230)

Universal Bumper Mount Kit

from

$72.99
Fey Diamondstep Bumpers are non-OE design full replacement bumpers for older model vans and pickups. Fey Diamondstep Bumpers are known for their diverse functionality, reliability and custom look.

Product Features:
  • Mount kit sold separately
  • Popular diamond tread design
  • Full size tongue weight of 800 lbs and 8,000 lbs trailer weight
  • Downsize and compact are 350 lbs tongue weight and 3,500 lbs is trailer weight certified
  • V5 tested certified to SAE J684
See More

Dorman – Window Lift Motor Gear Kit (Part No.747-411)

Window Lift Motor Gear Kit

from

$26.99
This replacement power window motor gear matches the dimensions of the original part. It restores power window operation when the original gear has become stripped and is made of quality materials for reliable service.

Product Features:
  • Ideal replacement – this power window motor gear matches the original part on specified vehicle years, makes and models
  • Durable construction – made of quality materials for reliable service
  • Cost-effective solution – offers original equipment function at a competitive price
  • Quality tested – this part has undergone try-on and lifecycle testing to ensure a quality fit and long service life
See More

Dorman – Door Hinge Pin And Bushing Kit – 4 Pins And 8 Bushings (sold by each) (Part No.703-272)

Door Hinge Pin And Bushing Kit - 4 Pins And 8 Bushings (sold by each)

from

$2.49
Restore the convenience of a properly functioning vehicle door with our Door Hinge Pin and Bushing Kit. It returns a sagging door to proper alignment and operation.

Product Features:
  • Kit includes all necessary hardware for the repair
  • Durable construction-hardened steel pin and brass bushing
  • Use the kit to replace only the damaged pin and bushing-instead of the entire hinge assembly
  • Trouble-free installation
See More

KAI – Rocker Panel (Part No.RRP305)

Rocker Panel

from

$30.99
New Standard Replacement Driver Side Rocker Panel, Standard Cab, 46 1/8 X 5 1/4

Product Features:
  • Standard Cab Models, 46 1/8 X 5 1/4, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

K-Source – Mirror Assembly: Driver Side, Power Adjustment, Foldable, 1 Pk (Part No.60128C)

Mirror Assembly: Driver Side, Power Adjustment, Foldable, 1 Pk

from

$133.99
Original Equipment Manufacturer Style Replacement Side View Mirror. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:
  • Driver side Mirror, tested to fit and function like the original, Meets or exceeds Original Equipment Manufacturer standards
  • Mirror glass is power adjustable
  • OE-comparable wiring harness/ connection (no “pigtail” connector) for hassle-free installation
  • Manual folding for additional clearance
  • Chrome Plated
See More

Dee Zee – With Step Pads, 3" Round Bent/ 64" L, Powder Coated, Black, Steel (Part No.DZ3700291)

With Step Pads, 3" Round Bent/ 64" L, Powder Coated, Black, Steel

from

$471.99
Dee Zee Nerf Steps A tubular side step for your vehicle. Constructed of black powder coated steel. 3 Inch round design. Molded plastic step pads provide non skid stepping areas. Hidden but sturdy bracing and hardware is coated to help prevent rust and keep your tubes strong.

Product Features:
  • Mounting Kit Included
  • Frame Body Mount Bolts
  • Drilling Required
  • 2 Pads On The Bar
  • Molded Plastic Step Pads Ensure Secure Footing. 90 Degree Bends And Hidden Bracing Create A Sleek Look
  • Hidden But Sturdy Bracing And Hardware Is Coated To Help Prevent Rust And Keep Your Tubes Strong
  • Hidden But Sturdy Bracing And Hardware Is Coated To Help Prevent Rust And Keep Your Tubes Strong
See More

KAI – Passenger Side Front Fender (Part No.CH1241118)

Passenger Side Front Fender

from

$409.99
New Standard Replacement Passenger Side Fender

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Rampage – EasyFit Cab Cover, 4 Layer, Gray, Includes Lock, Cable, Storage Bag, For Use With Standard Cab (Part No.1320)

EasyFit Cab Cover, 4 Layer, Gray, Includes Lock, Cable, Storage Bag, For Use With Standard Cab

from

$133.99
Product Features:
  • Soft And Durable Diamond Bond Pattern
  • Unique 4-Layer Breathable Material
  • Ultraviolet Protection Against Sun And Heat
  • Polypropylene Layers Repel Water
  • Side Grommets For Tie Downs
  • Includes Free Locking Cable And Storage Bag
  • Indoor And Outdoor Usage
See More

CARR – Cab Mount, Multi-Fit, Set Of 2, Flat Step, Non-Extendable, Polished, Aluminum (Part No.103992)

Cab Mount, Multi-Fit, Set Of 2, Flat Step, Non-Extendable, Polished, Aluminum

from

$141.99
Uniquely designed diamond tread pattern provides a safe non slip surface on the flat step area. Our exclusive multi mount system is designed for precision fit and easier installation. Constructed of an extremely strong die cast aluminum alloy for the ultimate in quality and durability. Rocker panel installation provides for the strongest and easiest installation of any step products.

Product Features:
  • Exclusive New Multi Mount System
  • Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
  • Rugged Diamond Tread Pattern Provides For Safe And Attractive Non Slip Surface
  • Unique Design Gives The Vehicle A Rugged Off Road Look, While Being A Stylish Accent For Today Vehicles
  • Strong Construction To Hold Up Under Extreme Conditions
  • Mechanical Polished Finish That Will Not Rust, Crack Or Peel And Requires Very Little Maintenance
  • Strongest And Easy Installation
See More

Dorman – Help – Exterior Door Handle Direct Fit (Part No.90017)

Exterior Door Handle Direct Fit

from

$42.99
Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:
  • Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
  • Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
  • Excellent value – original equipment quality at a lower price
  • Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace
See More

KAI – Window Regulator Assembly (Part No.GMK2244420782R)

Window Regulator Assembly

from

$69.99
New Goodmark Passenger Side Front Window Regulator, Power, Without Motor

Product Features:
  • Power Without Motor
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – Door Lock Kit (Part No.DLA1956)

Door Lock Kit

from

$62.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Multi Purpose Relay (Part No.RAA1752)

Multi Purpose Relay

from

$19.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Dorman – Help – Mirror Glass Without Backing Plate (Part No.57063)

Mirror Glass Without Backing Plate

from

$14.99
Cracked mirror glass? This door mirror glass is precision-engineered to match the original door mirror glass of specific vehicle years, makes and models for a simple and permanent replacement job.

Product Features:
  • Direct replacement – this door mirror glass is made to match the original mirror glass on specific vehicles
  • Seamless design – precisely cut to match the shape and look of the factory glass
  • Cost-effective solution – replace only the broken mirror glass rather than the entire mirror assembly
  • Easy installation – follow simple step-by-step procedure to swap out existing glass
See More

KAI – New Standard Replacement Passenger Side Lower Grille Insert, Black (Part No.CH1200135)

New Standard Replacement Passenger Side Lower Grille Insert, Black

from

$28.99
With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Passenger Side Lower Grille Insert, Black. It is Designed to Replace Your Existing Grille Insert. Check to Be Sure it Fits Your Vehicle.

Product Features:
  • Black, Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Rampage – Tailgate Light Bar, 60 in., Superbrite LED 5 Function with Brake (Part No.960134)

Tailgate Light Bar, 60 in., Superbrite LED 5 Function with Brake

from

$79.99
Rampage LED Tailgate Light Bar – Superbrite LED light bar from Rampage has been designed and manufactured to expand overall life expectancy with the introduction of a waterproof, fully sealed electrical system. This innovative Light Bar is brighter and lasts longer due to the development of a waterproof, fully sealed electrical system. The completely encapsulated circuit board with robotically assembled high intensity LED bulbs is encased in a rigid, injection molded cap while suspended in a UV stabilized clear urethane, creating a seamless, completely waterproof Tailgate Bar. The Rampage Truck, Mini Truck and SUV Tailgate light bar is designed to fill the recessed space between the tailgate and bumper, and is easily installed (without drilling) using durable 3M automotive grade adhesive foam tape, heavy gauge wiring with plug-in flat four hitch connector to quickly plug into existing trailer hitch. Includes fuse protection, long life superbrite LED bulbs for Brighter faster lighting response. Waterproof, high quality SMT technology circuit board, attaches to vehicle with 3M adhesive foam tape.

Product Features:
  • Six Function Superbright LED Bar
  • L/R Turn Signals
  • Flasher/Running Lights
  • Waterproof Completely Encased Electrical System
  • UV Stabilized Rigid Urethane Injected Molded Cap
  • Heavy Gauge Wiring With OEM 4 Plug Connector
  • Robotically Assembled LED Circuit In 49-Inch Bar
  • Universal Fit And Mounting With OEM 3M Tape
  • Long Life Super Bright LED Bulbs
See More

KAI – Door Mirror Glass (Part No.CH1323577)

Door Mirror Glass

from

$26.99
New Standard Replacement Driver And Passenger Side Mirror Glass, 9 5/8, Swing Out, Flat

Product Features:
  • 9.625, Swing Out, Flat, Flat Glass
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

1983 Dodge D350 Body Parts

You count on your 1983 Dodge D350 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Body Parts. With 64 Body Parts ranging in price from $4.49 to $773.99, you’re sure to find everything you need for your 1983 Dodge D350.

Brands matter. If you want to shop a specific Body Parts brand, we stock 12 different brands like Carquest Premium, Dorman, and Dee Zee. 1983 Dodge D350 Body Parts start as low as $4.49!

One of the best ways to find top quality OEM or aftermarket Body Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 48 extensive product reviews on 1983 Dodge D350 Body Parts. Some of the top-rated Body Parts products we carry are PRONET Tailgate Net with 2.5 stars and Window Lift Motor Gear Kit with 3.0 stars.

Did we mention you can order your Body Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Body Parts inventory for your 1983 Dodge D350 below to get started!

Top-Rated Body Parts Brands For Your 1983 Dodge D350

Trusted Body Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1983 Dodge D350 running right for years to come. In our inventory you’ll find brands like Carquest Premium, Dorman, Dee Zee, and even more.

Popular Westin Body Parts

You’ll find popular Westin brand products across Bumpers. All are waiting to get your 1983 Dodge D350 back on the road. Some of the top-rated Westin products in these categories are:
Universal Bumper Mount Kit
from $72.99
(4)
Universal Bumper Mount Kit
Bumper Mounting Kits
SureStep Universal Rear Bumper
from $472.99
(3)
SureStep Universal Rear Bumper
Rear Bumpers

FAQs for 1983 Dodge D350 Body Parts

What are the most purchased Body Parts for the 1983 Dodge D350?

Out of 64 Body Parts for the 1983 Dodge D350, the most popular in our inventory are:
Multi Purpose Relay
from $19.99
This product is not rated
Multi Purpose Relay
Door Lock Relays
Window Regulator hardware Kit - Scissor Type
from $8.99
This product is not rated
Window Regulator hardware Kit – Scissor Type
Window Regulator Repair Kits

What are the top-rated 1983 Dodge D350 Body Parts?

Top-rated Body Parts for your 1983 Dodge D350 based on customer reviews/ratings are:
PRONET Tailgate Net
from $64.99
(2)
PRONET Tailgate Net
“I purchased this to replace my broken tailgate on a chevy 1500 4×4 in order to obtain an inspection sticker. Seems strong but has a warning on the box”
Window Lift Motor Gear Kit
from $26.99
(1)
Window Lift Motor Gear Kit
“Everything included. Had to cut seal down, original didn’t have seal……or you can just use original cover. Bad part……lasted about 6 weeks …so”