1983 Dodge 400 Oil and Lubricants
Find Your Specific 1983 Dodge 400 Oil and Lubricants
Below you will find various in-demand Dodge Oil and Lubricants, components and accessories for your 1983 400. Advance Auto Parts has popular 400 parts like Motor Oils and more. You’ll also find aftermarket and OEM Oil and Lubricants for other 400 model years including
1982 and more. Select a category of 1983 Dodge 400 Oil and Lubricants below and start saving instantly.
Popular 1983 Dodge 400 Oil and Lubricants Categories
Essential Oil and Lubricants for 1983 Dodge 400s
Valvoline – High Mileage with MaxLife Technology Synthetic Blend 10W-30 Engine Oil: Maximize Engine Life, 5 Quart (Part No.881161)
from
$29.99
75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.
Product Features:
See More
Product Features:
- Maxlife technology prevents engine breakdown with 40% better wear protection than the industry standard
- Refresh aging seals and prevent leaks with seal conditioners
- Reduce sludge, deposits, corrosion, and rust with added detergents – keep motors clean inside
- Enhanced friction performance helps maximize power with advanced friction-fighting agents
- Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
- MaxLife Technology: The exclusive formula of Valvoline High Mileage with MaxLife Technology Engine Oil is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles.
FRAM – High Milage Conventional 5W-30 Motor Oil – Helps Restore Seal Condition, 1 Quart (Part No.F660)
from
$6.49
FRAM Conventional High Mileage 5W30 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 5W30 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF, and 5W30 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.
Product Features:
See More
Product Features:
- Formulated with a unique combination of premium base oils and an enhanced additive system
- Provides increased protection in higher mileage engines
- Helps restore seal condition to reduce oil consumption
- Increases protection against high temperature deposits and ring sticking
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
- Specially formulated for engines with over 75,000 miles to help reduce leaks and oil consumption.
FRAM – 30W Small Engine 30W Conventional Oil: 1 Quart (Part No.463-32)
from
$7.29
30W Small Engine 30W Conventional Oil: 1 Quart
FRAM – 10W40 Conventional Motor Oil, with Low-Speed Pre-Ignition Control, 1 Quart (Part No.F640)
from
$6.49
FRAM Engine Oil SAE 10W-40 engine oil utilizes high-quality base stocks and a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 10W-40 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. The FRAM Engine Oil SAE 10W-40 meets the requirements for API SP, SN Plus, SN, SM and earlier API Service Categories.
Product Features:
See More
Product Features:
- Low-speed pre-ignition control
- Chain wear protection
- Piston cleanliness
- Turbo-compatibility
- Low-speed pre-ignition control
- Chain wear protection
- Piston cleanliness
- Turbo-compatibility
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
Castrol – GTX High Mileage 10W-30 Synthetic Blend Motor Oil, 1 Quart (Part No.149D6C)
from
$10.49
Castrol GTX High Mileage 10W-30 is the No. 1 consumer high-mileage brand of motor oil. It’s a synthetic blend engine oil that helps extend the life of engines by protecting against sludge, wear and burn-off. Engineered with Phosphorous Replacement Technology, it also protects emission systems by replacing some of the phosphorous that can damage catalytic converters.
Product Features:
See More
Product Features:
- Phosphorus Replacement Technology to help extend the life of the emission system
- Superior dispersancy that fights sludge build up
- Exceptional oil burn-off protection exceeding industry standards (1)
- Seal conditioners to help reduce leaks
- Advanced additives that minimize engine wear
- Improved fuel economy (2)
- (1) Based on API and ACEA volatility specifications
- Meets or exceeds the following specifications:
- (2) In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
- Meets or exceeds the following specifications:
- API SP/SN PLUS/SM
- ILSAC GF-6
Castrol – EDGE Euro 5W-40 A3/B4 Advanced Full Synthetic Motor Oil, 5 Quarts (Part No.15B6FE)
from
$37.99
Castrol EDGE Euro 5W-40 A3/B4 is an advanced full synthetic motor oil engineered to exceed manufacturer test limits ensuring the highest level of protection and maximum performance for European cars. European car manufacturers create unique motor oil specifications to ensure the lubricant can withstand the intense pressure, heat and friction generated in a high output engine. To ensure compliance, rigorous engine tests are developed, with approval granted only when the oil achieves the minimum values required in each test. Castrol EDGE Euro Car fluids are formulated to exceed these requirements and deliver maximum protection and performance.
Product Features:
See More
Product Features:
- 1.2X Better viscosity control to help engines run better for longer (1)
- 2X Better engine cleanliness to help maximize engine performance (1)
- (1) As measured in DV6 test vs. test limit
- Approved and licensed specifications:
- ACEA A3/B4
- API SP
- BMW Longlife-01
- ILSAC GF-6
- MB-Approval MB 229.5
- Renault RN0700 / RN0710
- VW 502 00 / 505 00
- Meets engine test requirements of Chrysler MS 12991
FRAM – Conventional 10W30 Engine Oil with Low-Speed Pre-Ignition Control – 5 Qt (Part No.F630-5QT)
from
$25.99
FRAM Engine Oil SAE 10W-30 utilizes a blend of high-quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 10W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.
Product Features:
See More
Product Features:
- Low-speed pre-ignition control
- Chain wear protection
- Piston cleanliness
- Turbo-compatibility
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
- Suitable for modern engines: Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs.
FRAM – Full Synthetic 10W-30 Motor Oil – Helps Extend Motor Life, 1 Quart (Part No.F940)
from
$7.49
FRAM Engine Oil Full Synthetic SAE 10W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories.
Product Features:
See More
Product Features:
- Outstanding thermal and oxidation stability
- Excellent sludge and varnish protection
- Faster oil flow at start-up
- Volatility: lowers oil vaporization and consumption at extreme conditions
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
- Ultimate engine protection: FRAM Full Synthetic Oil 10W30 1 QT is specifically formulated with high-quality synthetic base stocks and advanced additive technology to provide the ultimate protection for your engine, ensuring its longevity and performance.
Castrol – EDGE 10W-30 Advanced Full Synthetic Motor Oil, 5 Quarts (Part No.1598B6)
from
$37.99
Castrol EDGE 10W-30 is an advanced full synthetic motor oil and the optimal choice for drivers who want the best combination of wear protection, viscosity control and thermal stability to maximize engine performance. It is one of Castrols strongest engine oils with the strength to maintain this unsurpassed level of engine protection for up to 20,000 miles between oil changes or one year.
Product Features:
See More
Product Features:
- 3X Stronger than the leading full synthetic (1)
- 10X Better high stress performance (2)
- 20,000 miles between oil changes (3)
- (1) Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
- (2) As measured in Seq IX test under high load/torque conditions vs. API SP test limits
- (3) Or one year, whichever comes first
- Approved and Licensed Specifications:
- Exceeds API SP/SN PLUS/SN/SM
FRAM – Conventional 10W40 Engine Oil with Low-Speed Pre-Ignition Control, 5 Quart (Part No.F640-5QT)
from
$25.99
FRAM Engine Oil SAE 10W-40 engine oil utilizes high-quality base stocks and a robustï additive system to provide reliable engine protection across a broad range of operatingï conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engineï designs. FRAM Engine Oil SAE 10W-40 contains additive technology designed to preventï low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation andï shear stability over previous oil categories. The FRAM Engine Oil SAE 10W-40 meets theï requirements for API SP, SN Plus, SN, SM and earlier API Service Categories.
Product Features:
See More
Product Features:
- Low-speed pre-ignition control
- Chain wear protection
- Piston cleanliness
- Turbo-compatibility
- Low-speed pre-ignition control
- Chain wear protection
- Piston cleanliness
- Turbo-compatibility
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
FRAM – 5W-30 Full Synthetic Motor Oil: 1 Quart (Part No.F930)
from
$7.49
FRAM Engine Oil Full Synthetic SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos1 Gen 3 and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil Full Synthetic SAE 5W-30 and is a fully licensed GM dexos1 Gen 3 motor oil.
Product Features:
See More
Product Features:
- Faster oil flow at start-up
- Fuel efficiency gains over heavier grade oils
- Excellent sludge and varnish protection
- Outstanding thermal and oxidation stability
- Lowers oil vaporization and consumption at extreme conditions
- ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
- Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 5W-30 meets stringent API: SP, SN, SM, SL, SJ, GM Dexos1 Gen 3, and ILSAC GF-6A specifications, ensuring top-tier protection for your engine.
- Advanced Additive Technology: Specifically formulated to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs, reducing the risk of premature engine failure.
- Enhanced Wear Protection: Provides increased wear protection, oxidation, and shear stability over previous oil categories, extending the life of your engine.
- Versatile Compatibility: Suitable for use in carbureted, normally fuel-injected engines, and the rigorous environment of GDI and TGDI engines, offering broad application versatility.
- Fully Licensed GM dexos1 Gen 3: This oil is a fully licensed GM dexos1 Gen 3 motor oil, ensuring it meets the high standards set by General Motors for optimal engine performance.
Castrol – EDGE High Mileage 5W-30 Advanced Full Synthetic Motor Oil, 1 Quart (Part No.15979F)
from
$12.99
Castrol EDGE High Mileage 5W-30 is an advanced full synthetic motor oil that is specifically designed for vehicles with over 75,000 miles. It’s been engineered to reduce leaks, burnoff and power robbing deposits, but also contains a proprietary additive to protect the emission system. Our Phosphorus Replacement Technology reduces harmful phosphorus to protect the catalytic converter and extend maximum performance. It is the natural choice for drivers who demand maximum performance from their high mileage car.
Product Features:
See More
Product Features:
- Phosphorus Replacement Technology to help extend the life of the emission system
- Reduces leaks, oil burnoff and power robbing deposits
- 15,000 miles between oil changes (1)
- (1) Or one year, whichever comes first
- Meets or exceeds the following specifications:
- API SP/SN PLUS/SN/SM
- ILSAC GF-6
- Meets Ford WSS-M2C960-A1
- Meets engine test requirements of Chrysler MS 6395
- Meets Ford WSS-M2C946-B1
- Meets Ford WSS-M2C961-A1
Castrol – Conventional 30W Engine Oil – Protects against thermal breakdown – 1 Qt (Part No.151B00)
from
$8.49
Castrol Conventional 30W Engine Oil is a high-quality monograde oil that provides maximum engine wear protection. It contains dispersants, antioxidants, detergents, and other additives that help to keep the engine clean and running smoothly. This heavy-duty formula is engineered to provide greater protection against thermal breakdown, which can cause engine damage and reduce performance. Castrol Conventional 30W Engine Oil exceeds all passenger car and light-truck manufacturer’s warranty requirements and is made in the USA. It is an ideal choice for those who want to keep their engines running smoothly and efficiently. Protect your engine against thermal breakdown with Castrol Conventional 30W Engine Oil.
Product Features:
See More
Product Features:
- Heavy-duty formula provides maximum engine wear protection in warm climates; designed for use in temperatures above 40 Deg. F
- Contains dispersants, antioxidants, detergents and varnish inhibitors that help prevent ring-sticking and build up of harmful engine deposits
- Engineered for greater protection against thermal breakdown
- Exceeds all passenger car and light-truck manufacturers’ warranty requirements for the protection of gasoline and turbocharged engines where api sm, sl, sj or sh is recommended
- Made in the usa
- Thermal Protection: GTX Engine Oil, SAE 30 provides superior protection against thermal breakdown, ensuring your engine stays cool and running smoothly.
FRAM – 10W-30 High Mileage Full Synthetic Motor Oil: 1 Quart (Part No.F943)
from
$7.99
FRAM Full Synthetic High Mileage SAE 10W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 10W-30 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 10W-30 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.
Product Features:
See More
Product Features:
- Faster oil flow at start-up
- Fuel efficiency gains over heavier grade oils
- Reduces oil cumsumption
- Excellent sludge and varnish protection
- Slows engine leaks
- Outstanding thermal and oxidation stability
- Lowers oil vaporization and consumption at extreme conditions
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
FRAM – 10W-30 Full Synthetic Motor Oil, Ultimate Protection, 5 Quarts (Part No.F940-5QT)
from
$27.99
FRAM Engine Oil Full Synthetic SAE 10W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories.
Product Features:
See More
Product Features:
- Outstanding thermal and oxidation stability
- Excellent sludge and varnish protection
- Faster oil flow at start-up
- Volatility: Lowers oil vaporization and consumption at extreme conditions
- ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
- Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 10W-30 is formulated with high-quality synthetic base stocks and the latest additive technology to provide the ultimate protection for your engine.
- Advanced LSPI Prevention: Contains additive technology specifically designed to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct injection (GDI) and turbo gas-direct injection (TGDI) engines.
- Enhanced Wear Protection: Offers increased wear protection, ensuring your engine components remain in optimal condition even under rigorous driving conditions.
- Versatile Engine Compatibility: Suitable for a wide range of engines, including GDI, TGDI, carbureted, and normally fuel-injected engines, making it a versatile choice for various vehicle types.
Castrol – GTX 10W-30 High Mileage Synthetic Blend Motor Oil, 5 Quart (Part No.1597B0)
from
$30.99
Castrol GTX High Mileage 10W-30 is the No. 1 consumer high-mileage brand of motor oil. It’s a synthetic blend engine oil that helps extend the life of engines by protecting against sludge, wear and burn-off. Engineered with Phosphorous Replacement Technology, it also protects emission systems by replacing some of the phosphorous that can damage catalytic converters.
Product Features:
See More
Product Features:
- Phosphorus Replacement Technology helps extend emission system life
- Superior dispersancy that fights sludge build up
- Exceptional oil burn-off protection exceeding industry standards (1)
- Seal conditioners to help reduce leaks
- Advanced additives that minimize engine wear
- Improved fuel economy (2)
- (1) Based on API and ACEA volatility specifications
- ILSAC GF-6
- (2) In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
- API SP/SN PLUS/SN/SM
- ILSAC GF-6
Castrol – EDGE Euro Car 5W-30 C3 Full Synthetic Motor Oil, 1 Quart (Part No.154BC4)
from
$12.49
CASTROL EDGE Euro Car 5W-30 C3 Full Synthetic Motor Oil is a high-performance engine oil that is designed to provide superior protection to the latest technology, high output engines that operate at extreme temperatures. This full-synthetic motor oil is formulated to transform under pressure, increasing film strength to prevent oil breakdown and reduce friction to unlock maximum performance. It is optimized to deliver 40% better performance than other motor oils and is recommended by world-leading auto manufacturers. This motor oil provides engine protection for the entire drain interval and meets API CF/SN, ACEA A3/B4, ACEA C3, GM dexos2 specifications. It is suitable for European OEM diesel specifications for Mercedes-Benz and VW/Audi. This motor oil was formerly known as Castrol SLX and is available in a 1 quart container.
Product Features:
See More
Product Features:
- Optimized to deliver 40% better performance than required by acea standards.
- Recommended by world leading auto manufacturers
- Engine protection for the entire drain interval even under extreme pressure of high output engines
- Meets api cf/sn, acea a3/b4, acea c3, gm dexos2, mb approval 229.31/229.51, vw 505 00/505 01, renault rn 0700/0710
- Formerly known as castrol slx
- Syntec Power Technology: The reformulated EDGE Engine Oil now features Syntec Power Technology, which enhances its performance even further.
Castrol – GTX 10W-40 Conventional Motor Oil, 1 Quart (Part No.14CD5A)
from
$9.99
Castrol GTX 10W-40 is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life.
Product Features:
See More
Product Features:
- Advanced protection against viscosity and thermal breakdown
- Superior protection against engine sludge
- Premium quality base oils and anti-wear additives to help extend the life of your engine
- Helps minimize oil consumption
- (1) When tested in engines with a high level of sludge
- Meets or exceeds the following specifications:
- API SP/SN PLUS/SN/SM
FRAM – 5W-30 Full Synthetic Motor Oil: 5 Quart (Part No.F930-5QT)
from
$27.99
FRAM Engine Oil Full Synthetic SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos1 Gen 3 and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil Full Synthetic SAE 5W-30 and is a fully licensed GM dexos1 Gen 3 motor oil.
Product Features:
See More
Product Features:
- Faster oil flow at start-up
- Fuel efficiency gains over heavier grade oils
- Excellent sludge and varnish protection
- Outstanding thermal and oxidation stability
- Lowers oil vaporization and consumption at extreme conditions
- ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
- Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 5W-30 meets stringent API: SP, SN, SM, SL, SJ, GM Dexos1 Gen 3, and ILSAC GF-6A specifications, ensuring top-tier protection for your engine.
- Advanced Additive Technology: Specifically formulated to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs, reducing the risk of premature engine failure.
- Enhanced Wear Protection: Provides increased wear protection, oxidation, and shear stability over previous oil categories, extending the life of your engine.
- Versatile Compatibility: Suitable for use in carbureted, normally fuel-injected engines, and the rigorous environment of GDI and TGDI engines, offering broad application versatility.
- Fully Licensed GM dexos1 Gen 3: This oil is a fully licensed GM dexos1 Gen 3 motor oil, ensuring it meets the high standards set by General Motors for optimal engine performance.
Castrol – GTX 20W-50 Conventional Motor Oil, 5 Quarts (Part No.15984B)
from
$29.99
Castrol GTX 20W-50 is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life.
Product Features:
See More
Product Features:
- Advanced protection against viscosity and thermal breakdown
- Superior protection against engine sludge
- Premium quality base oils and anti-wear additives to help extend the life of your engine
- Helps minimize oil consumption
- Meets or exceeds the following specifications:
- API SP/SN PLUS/SN/SM
Castrol – GTX 10W-40 Conventional Motor Oil, 5 Quarts (Part No.15982E)
from
$31.99
Castrol GTX 10W-40 is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life.
Product Features:
See More
Product Features:
- Advanced protection against viscosity and thermal breakdown
- Superior protection against engine sludge
- Premium quality base oils and anti-wear additives to help extend the life of your engine
- Helps minimize oil consumption
- (1) When tested in engines with a high level of sludge
- Meets or exceeds the following specifications:
- API SP/SN PLUS/SN/SM
Castrol – EDGE Euro 5W-40 A3/B4 Advanced Full Synthetic Motor Oil, 1 Quart (Part No.152C7E)
from
$12.49
Castrol EDGE Euro 5W-40 A3/B4 is an advanced full synthetic motor oil engineered to exceed manufacturer test limits ensuring the highest level of protection and maximum performance for European cars. European car manufacturers create unique motor oil specifications to ensure the lubricant can withstand the intense pressure, heat and friction generated in a high output engine. To ensure compliance, rigorous engine tests are developed, with approval granted only when the oil achieves the minimum values required in each test. Castrol EDGE Euro Car fluids are formulated to exceed these requirements and deliver maximum protection and performance.
Product Features:
See More
Product Features:
- 1.2X Better viscosity control to help engines run better for longer (1)
- 2X Better engine cleanliness to help maximize engine performance (1)
- (1) As measured in DV6 test vs. test limit
- Approved and licensed specifications:
- ACEA A3/B4
- API SP
- BMW Longlife-01
- MB-Approval MB 229.5
- Renault RN0700 / RN0710
- VW 502 00 / 505 00
- Meets engine test requirements of Chrysler MS 12991
Castrol – GTX 5W-30 Synthetic Blend Motor Oil, 5 Quart (Part No.15A66D)
from
$29.99
Castrol GTX 5W-30 is a synthetic blend motor oil with a double-action formula proven to clean away the sludge that can block engine oilways (1) and help prevent new sludge formation. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life. (1) When tested in engines with a high level of sludge.
Product Features:
See More
Product Features:
- Premium-quality base oils and anti-wear additives that help extend engine life
- Superior protection against engine sludge
- Advanced protection against viscosity and thermal breakdown
- Superior protection against high-temperature deposits
- Meets or exceeds the following specifications:
- API SP/SN PLUS/SN/SM
- ILSAC GF-6
- ILSAC GF-6
- Meets Ford WSS-M2C946-B1
Castrol – EDGE Euro 5W-30 K Advanced Full Synthetic Motor Oil, 1 Quart (Part No.15E892)
from
$11.49
Castrol EDGE Euro 5W-30 K is an advanced full synthetic motor oil engineered to exceed manufacturer test limits ensuring the highest level of protection and maximum performance for European cars. European car manufacturers create unique motor oil specifications to ensure the lubricant can withstand the intense pressure, heat and friction generated in a high output engine. To ensure compliance, rigorous engine tests are developed, with approval granted only when the oil achieves the minimum values required in each test. Castrol EDGE Euro Car fluids are formulated to exceed these requirements and deliver maximum protection and performance.
Product Features:
See More
Product Features:
- 3X Better wear protection to reduce friction and optimize performance (1)
- 1.9X Better engine cleanliness to help maximize engine performance (1)
- (1) As measured in OM646LA test vs. test limit
- Approved and licensed specifications:
- ACEA C3
- API SP
- BMW Longlife-04
- Meets Ford WSS-M2C947-B1
- MB-Approval 229.31/ 229.51/ 229.52
- Porsche C30
- Renault RN 0700 / RN 0710
Castrol – GTX High Mileage 5W-30 Synthetic Blend Motor Oil, 1 Quart (Part No.149D6A)
from
$10.49
Castrol GTX High Mileage 5W-30 is the #1 consumer high-mileage brand of motor oil. It’s a synthetic blend engine oil that helps extend the life of engines by protecting against sludge, wear and burn-off. Engineered with Phosphorous Replacement Technology, it also protects emission systems by replacing some of the phosphorous that can damage catalytic converters.
Product Features:
See More
Product Features:
- Phosphorus Replacement Technology helps extend emission system life
- Superior dispersancy that fights sludge build up
- Exceptional oil burn-off protection exceeding industry standards (1)
- Seal conditioners to help reduce leaks
- Advanced additives that minimize engine wear
- Improved fuel economy (2)
- (1)Based on API and ACEA volatility specifications
- Approved for BMW M-Models
- (2) In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
- Meets or exceeds the following specifications:
- API SP/SN PLUS/SN/SM
- ILSAC GF-6
- Meets Ford WSS-M2C946-B1
- Meets Ford WSS-M2C961-A1
FRAM – 10W-30 Small Engine 10W-30 Conventional Oil: 1 Quart (Part No.464-32)
from
$7.29
10W-30 Small Engine 10W-30 Conventional Oil: 1 Quart
Castrol – EDGE Euro 5W-30 A3/B4 Advanced Full Synthetic Motor Oil, 1 Quart (Part No.15484E)
from
$12.49
Castrol EDGE Euro 5W-30 A3/B4 is an advanced full synthetic motor oil engineered to exceed manufacturer test limits ensuring the highest level of protection and maximum performance for European cars. European car manufacturers create unique motor oil specifications to ensure the lubricant can withstand the intense pressure, heat and friction generated in a high output engine. To ensure compliance, rigorous engine tests are developed, with approval granted only when the oil achieves the minimum values required in each test. Castrol EDGE Euro Car fluids are formulated to exceed these requirements and deliver maximum protection and performance.
Product Features:
See More
Product Features:
- 1.2X Better viscosity control to help engines run better for longer (1)
- 2X Better engine cleanliness to help maximize engine performance (2)
- (1) As measured in DV6 test vs. test limit
- (2) As measured in OM646LA test vs. test limit
- Approved and licensed specifications:
- ACEA A3/B4
- API SL
- Meets Ford WSS-M2C946-B1
- BMW Longlife-01
- MB-Approval 229.5
- VW 502 00 / 505 00
FRAM – 10W-40 High Mileage Conventional Motor Oil, Helps Reduce Leaks, 1 Quart (Part No.F670)
from
$6.49
FRAM Conventional High Mileage 10W40 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 10W40 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF.
Product Features:
See More
Product Features:
- Formulated with a unique combination of premium base oils and an enhanced additive system
- Provides increased protection in higher mileage engines
- Helps restore seal condition to reduce oil consumption
- Increases protection against high temperature deposits and ring sticking
- ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
- Sludge Cleanup: Formulated to help clean out sludge buildup, keeping engines running clean and with increased efficiency and power.
- Versatile Compatibility: Suitable for gasoline and light-duty diesel engines, including turbocharged and supercharged engines.
- Meets Industry Standards: Meets or exceeds all new car manufacturers’ warranty requirements and stringent industry standards API SP/CF.
Upgrade your 1983 Dodge 400 with Top-Quality Oil and Lubricants
When it comes to maintaining or upgrading your 1983 Dodge 400, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Dodge or enhancing its overall performance, Oil and Lubricants are key to keeping your 400 functioning at its best. At Advance Auto Parts, we offer a wide selection of 55 Oil and Lubricants for the 1983 Dodge 400, designed to meet your needs without breaking the bank.
Affordable Prices and Wide Selection
Shopping for Oil and Lubricants for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Oil and Lubricants for your 1983 Dodge 400 at great prices.
Our Oil and Lubricants inventory for this model
ranges from just $6.49 to $38.99, with
an average price of $18.67.
Our 55 Oil and Lubricants in stock come from 3 trusted brands, so you’re sure to find the right part for your 1983 Dodge 400 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1983 Dodge 400, we stock popular OEM and aftermarket Oil and Lubricants from top names
like Castrol Valvoline, and more.
Castrol Oil and Lubricants
start at just $8.49 and boast an impressive 5 stars average rating from customers.
With 10,278 customer reviews and counting, our 1983 Dodge 400 Oil and Lubricants have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Oil and Lubricant upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals
and more to make sure your 1983 Dodge 400 is always ready to roll. We’re committed to providing you with everything you need to keep your 400 in top shape, all in one place.
Start shopping confidently below for your 1983 Dodge 400!
Best-Selling Motor Oil for 1983 Dodge 400s
Enhance the driving experience in your Dodge with 55 quality Motor Oil components, starting at $6.49.
Castrol – EDGE High Mileage 5W-30 Advanced Full Synthetic Engine Oil, 5 Qt (Part No.15906E)
from
$38.99
Castrol EDGE High Mileage 5W-30 is an advanced full synthetic motor oil that is specifically designed for vehicles with over 75,000 miles. It’s been engineered to reduce leaks, burnoff and power robbing deposits, but also contains a proprietary additive to protect the emission system. Our Phosphorus Replacement Technology reduces harmful phosphorus to protect the catalytic converter and extend maximum performance. It is the natural choice for drivers who demand maximum performance from their high mileage car.
Product Features:
See More
Product Features:
- Phosphorus Replacement Technology to help extend the life of the emission system
- Reduces leaks, oil burnoff and power robbing deposits
- 15,000 miles between oil changes (1)
- (1) Or one year, whichever comes first
- Meets or exceeds the following specifications:
- API SP/SN PLUS/SN/SM
- ILSAC GF-6
- Porsche A40
- Meets engine test requirements of Chrysler MS 6395
- Meets Ford WSS-M2C961-A1
Castrol – GTX High Mileage 5W-30 Synthetic Blend Engine Oil, 5 Quart (Part No.15980E)
from
$30.99
Castrol GTX High Mileage 5W-30 is the No. 1 consumer high-mileage brand of motor oil. It’s a synthetic blend engine oil that helps extend the life of engines by protecting against sludge, wear and burn-off. Engineered with Phosphorous Replacement Technology, it also protects emission systems by replacing some of the phosphorous that can damage catalytic converters.
Product Features:
See More
Product Features:
- Phosphorus Replacement Technology helps extend emission system life
- Superior dispersancy that fights sludge build up
- Exceptional oil burn-off protection exceeding industry standards (1)
- Seal conditioners to help reduce leaks
- Advanced additives that minimize engine wear
- Improved fuel economy (2)
- (1) Based on API and ACEA volatility specifications
- MB-Approval 229.5
- (2) In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
- API SP/SN PLUS/SN/SM
- ILSAC GF-6
- Meets Ford WSS-M2C946-B1
- Meets Ford WSS-M2C961-A1
Castrol – EDGE Euro 5W-40 A3/B4 Advanced Full Synthetic Motor Oil, 5 Quarts (Part No.15B6FE)
from
$37.99
Castrol EDGE Euro 5W-40 A3/B4 is an advanced full synthetic motor oil engineered to exceed manufacturer test limits ensuring the highest level of protection and maximum performance for European cars. European car manufacturers create unique motor oil specifications to ensure the lubricant can withstand the intense pressure, heat and friction generated in a high output engine. To ensure compliance, rigorous engine tests are developed, with approval granted only when the oil achieves the minimum values required in each test. Castrol EDGE Euro Car fluids are formulated to exceed these requirements and deliver maximum protection and performance.
Product Features:
See More
Product Features:
- 1.2X Better viscosity control to help engines run better for longer (1)
- 2X Better engine cleanliness to help maximize engine performance (1)
- (1) As measured in DV6 test vs. test limit
- Approved and licensed specifications:
- ACEA A3/B4
- API SP
- BMW Longlife-01
- ILSAC GF-6
- MB-Approval MB 229.5
- Renault RN0700 / RN0710
- VW 502 00 / 505 00
- Meets engine test requirements of Chrysler MS 12991
Castrol – EDGE 5W-30 Advanced Full Synthetic Engine Oil, 5 Quart (Part No.1598B1)
from
$37.99
Castrol EDGE 5W-30 is an advanced full synthetic motor oil and the optimal choice for drivers who want the best combination of wear protection, viscosity control and thermal stability to maximize engine performance. It is one of Castrols strongest engine oils with the strength to maintain this unsurpassed level of engine protection for up to 20,000 miles between oil changes or one year.
Product Features:
See More
Product Features:
- 3X Stronger than the leading full synthetic (1)
- 10X Better high stress performance (2)
- 20,000 miles between oil changes (3)
- (1) Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
- (2) As measured in Seq IX test under high load/torque conditions vs. API SP test limits
- (3) Or one year, whichever comes first
- Approved and Licensed Specifications:
- ILSAC GF-6
- Exceeds API SP/SN PLUS/SN/SM
- GM dexos1 Gen 3
- Meets engine test requirements of Chrysler MS 6395
- Meets Ford WSS-M2C946-B1
- Meets Ford WSS-M2C961-A1
Castrol – GTX 10W-30 High Mileage Synthetic Blend Motor Oil, 5 Quart (Part No.1597B0)
from
$30.99
Castrol GTX High Mileage 10W-30 is the No. 1 consumer high-mileage brand of motor oil. It’s a synthetic blend engine oil that helps extend the life of engines by protecting against sludge, wear and burn-off. Engineered with Phosphorous Replacement Technology, it also protects emission systems by replacing some of the phosphorous that can damage catalytic converters.
Product Features:
See More
Product Features:
- Phosphorus Replacement Technology helps extend emission system life
- Superior dispersancy that fights sludge build up
- Exceptional oil burn-off protection exceeding industry standards (1)
- Seal conditioners to help reduce leaks
- Advanced additives that minimize engine wear
- Improved fuel economy (2)
- (1) Based on API and ACEA volatility specifications
- ILSAC GF-6
- (2) In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
- API SP/SN PLUS/SN/SM
- ILSAC GF-6
Castrol – EDGE 5W-30 Advanced Full Synthetic Motor Oil, 1 Quart (Part No.152C3C)
from
$11.99
Castrol EDGE 5W-30 is an advanced full synthetic motor oil and the optimal choice for drivers who want the best combination of wear protection, viscosity control and thermal stability to maximize engine performance. It is one of Castrols strongest engine oils with the strength to maintain this unsurpassed level of engine protection for up to 20,000 miles between oil changes or one year.
Product Features:
See More
Product Features:
- 3X Stronger than the leading full synthetic (1)
- 10X Better high stress performance (2)
- 20,000 miles between oil changes (3)
- (1) Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
- (2) As measured in Seq IX test under high load/torque conditions vs. API SP test limits
- (3) Or one year, whichever comes first
- Approved and Licensed Specifications:
- ACEA A5/B5, C2
- Exceeds API SP/SN PLUS/SN/SM
- GM dexos1 Gen 3
- Meets engine test requirements of Chrysler MS 6395
- Meets Ford WSS-M2C946-B1
- Meets Ford WSS-M2C961-A1
Castrol – EDGE Euro 5W-40 A3/B4 Advanced Full Synthetic Motor Oil, 1 Quart (Part No.152C7E)
from
$12.49
Castrol EDGE Euro 5W-40 A3/B4 is an advanced full synthetic motor oil engineered to exceed manufacturer test limits ensuring the highest level of protection and maximum performance for European cars. European car manufacturers create unique motor oil specifications to ensure the lubricant can withstand the intense pressure, heat and friction generated in a high output engine. To ensure compliance, rigorous engine tests are developed, with approval granted only when the oil achieves the minimum values required in each test. Castrol EDGE Euro Car fluids are formulated to exceed these requirements and deliver maximum protection and performance.
Product Features:
See More
Product Features:
- 1.2X Better viscosity control to help engines run better for longer (1)
- 2X Better engine cleanliness to help maximize engine performance (1)
- (1) As measured in DV6 test vs. test limit
- Approved and licensed specifications:
- ACEA A3/B4
- API SP
- BMW Longlife-01
- MB-Approval MB 229.5
- Renault RN0700 / RN0710
- VW 502 00 / 505 00
- Meets engine test requirements of Chrysler MS 12991
Castrol – EDGE High Mileage 5W-30 Advanced Full Synthetic Motor Oil, 1 Quart (Part No.15979F)
from
$12.99
Castrol EDGE High Mileage 5W-30 is an advanced full synthetic motor oil that is specifically designed for vehicles with over 75,000 miles. It’s been engineered to reduce leaks, burnoff and power robbing deposits, but also contains a proprietary additive to protect the emission system. Our Phosphorus Replacement Technology reduces harmful phosphorus to protect the catalytic converter and extend maximum performance. It is the natural choice for drivers who demand maximum performance from their high mileage car.
Product Features:
See More
Product Features:
- Phosphorus Replacement Technology to help extend the life of the emission system
- Reduces leaks, oil burnoff and power robbing deposits
- 15,000 miles between oil changes (1)
- (1) Or one year, whichever comes first
- Meets or exceeds the following specifications:
- API SP/SN PLUS/SN/SM
- ILSAC GF-6
- Meets Ford WSS-M2C960-A1
- Meets engine test requirements of Chrysler MS 6395
- Meets Ford WSS-M2C946-B1
- Meets Ford WSS-M2C961-A1
Castrol – GTX 5W-30 Synthetic Blend Motor Oil, 5 Quart (Part No.15A66D)
from
$29.99
Castrol GTX 5W-30 is a synthetic blend motor oil with a double-action formula proven to clean away the sludge that can block engine oilways (1) and help prevent new sludge formation. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life. (1) When tested in engines with a high level of sludge.
Product Features:
See More
Product Features:
- Premium-quality base oils and anti-wear additives that help extend engine life
- Superior protection against engine sludge
- Advanced protection against viscosity and thermal breakdown
- Superior protection against high-temperature deposits
- Meets or exceeds the following specifications:
- API SP/SN PLUS/SN/SM
- ILSAC GF-6
- ILSAC GF-6
- Meets Ford WSS-M2C946-B1
Castrol – GTX High Mileage 5W-30 Synthetic Blend Motor Oil, 1 Quart (Part No.149D6A)
from
$10.49
Castrol GTX High Mileage 5W-30 is the #1 consumer high-mileage brand of motor oil. It’s a synthetic blend engine oil that helps extend the life of engines by protecting against sludge, wear and burn-off. Engineered with Phosphorous Replacement Technology, it also protects emission systems by replacing some of the phosphorous that can damage catalytic converters.
Product Features:
See More
Product Features:
- Phosphorus Replacement Technology helps extend emission system life
- Superior dispersancy that fights sludge build up
- Exceptional oil burn-off protection exceeding industry standards (1)
- Seal conditioners to help reduce leaks
- Advanced additives that minimize engine wear
- Improved fuel economy (2)
- (1)Based on API and ACEA volatility specifications
- Approved for BMW M-Models
- (2) In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
- Meets or exceeds the following specifications:
- API SP/SN PLUS/SN/SM
- ILSAC GF-6
- Meets Ford WSS-M2C946-B1
- Meets Ford WSS-M2C961-A1
Castrol – GTX 10W-30 Conventional Motor Oil, 5 Quarts (Part No.15B7AA)
from
$29.99
Castrol GTX 10W-30 is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life.
Product Features:
See More
Product Features:
- Advanced protection against viscosity and thermal breakdown
- Superior protection against engine sludge
- Premium quality base oils and anti-wear additives to help extend the life of your engine
- Helps minimize oil consumption
- Meets or exceeds the following specifications:
- API SP/SN PLUS/SN/SM
- ILSAC GF-6
- Meets Ford WSS-M2C961-A1
Castrol – EDGE Euro 5W-30 A3/B4 Advanced Full Synthetic Motor Oil, 1 Quart (Part No.15484E)
from
$12.49
Castrol EDGE Euro 5W-30 A3/B4 is an advanced full synthetic motor oil engineered to exceed manufacturer test limits ensuring the highest level of protection and maximum performance for European cars. European car manufacturers create unique motor oil specifications to ensure the lubricant can withstand the intense pressure, heat and friction generated in a high output engine. To ensure compliance, rigorous engine tests are developed, with approval granted only when the oil achieves the minimum values required in each test. Castrol EDGE Euro Car fluids are formulated to exceed these requirements and deliver maximum protection and performance.
Product Features:
See More
Product Features:
- 1.2X Better viscosity control to help engines run better for longer (1)
- 2X Better engine cleanliness to help maximize engine performance (2)
- (1) As measured in DV6 test vs. test limit
- (2) As measured in OM646LA test vs. test limit
- Approved and licensed specifications:
- ACEA A3/B4
- API SL
- Meets Ford WSS-M2C946-B1
- BMW Longlife-01
- MB-Approval 229.5
- VW 502 00 / 505 00
Valvoline – High Mileage with MaxLife Technology Synthetic Blend 10W-30 Engine Oil: Maximize Engine Life, 5 Quart (Part No.881161)
from
$29.99
75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.
Product Features:
See More
Product Features:
- Maxlife technology prevents engine breakdown with 40% better wear protection than the industry standard
- Refresh aging seals and prevent leaks with seal conditioners
- Reduce sludge, deposits, corrosion, and rust with added detergents – keep motors clean inside
- Enhanced friction performance helps maximize power with advanced friction-fighting agents
- Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
- MaxLife Technology: The exclusive formula of Valvoline High Mileage with MaxLife Technology Engine Oil is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles.
Castrol – EDGE Euro Car 5W-30 C3 Full Synthetic Motor Oil, 1 Quart (Part No.154BC4)
from
$12.49
CASTROL EDGE Euro Car 5W-30 C3 Full Synthetic Motor Oil is a high-performance engine oil that is designed to provide superior protection to the latest technology, high output engines that operate at extreme temperatures. This full-synthetic motor oil is formulated to transform under pressure, increasing film strength to prevent oil breakdown and reduce friction to unlock maximum performance. It is optimized to deliver 40% better performance than other motor oils and is recommended by world-leading auto manufacturers. This motor oil provides engine protection for the entire drain interval and meets API CF/SN, ACEA A3/B4, ACEA C3, GM dexos2 specifications. It is suitable for European OEM diesel specifications for Mercedes-Benz and VW/Audi. This motor oil was formerly known as Castrol SLX and is available in a 1 quart container.
Product Features:
See More
Product Features:
- Optimized to deliver 40% better performance than required by acea standards.
- Recommended by world leading auto manufacturers
- Engine protection for the entire drain interval even under extreme pressure of high output engines
- Meets api cf/sn, acea a3/b4, acea c3, gm dexos2, mb approval 229.31/229.51, vw 505 00/505 01, renault rn 0700/0710
- Formerly known as castrol slx
- Syntec Power Technology: The reformulated EDGE Engine Oil now features Syntec Power Technology, which enhances its performance even further.
Castrol – GTX 5W-20 Synthetic Blend Motor Oil, 5 Quarts (Part No.15A66C)
from
$9.99
Castrol GTX 5W-20 is a synthetic blend motor oil with a double-action formula proven to clean away the sludge that can block engine oilways (1) and help prevent new sludge formation. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life. (1) When tested in engines with a high level of sludge
Product Features:
See More
Product Features:
- Premium-quality base oils and anti-wear additives that help extend engine life
- Superior protection against engine sludge
- Advanced protection against viscosity and thermal breakdown
- Superior protection against high-temperature deposits
- Meets or exceeds the following specifications:
- API SP/SN PLUS/SN/SM
- ILSAC GF-6
- Meets or exceeds the following specifications:
- Meets Ford WSS-M2C945-B1
- Meets Ford WSS-M2C960-A1
Castrol – GTX 10W-30 Conventional Motor Oil, 1 Quart (Part No.15B400)
from
$9.99
Castrol GTX 10W-30 is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life.
Product Features:
See More
Product Features:
- Advanced protection against viscosity and thermal breakdown
- Superior protection against engine sludge
- Premium quality base oils and anti-wear additives to help extend the life of your engine
- Helps minimize oil consumption
- Meets or exceeds the following specifications:
- API SP/SN PLUS/SN/SM
- ILSAC GF-6
- Meets Ford WSS-M2C960-A1
Castrol – GTX High Mileage 10W-30 Synthetic Blend Motor Oil, 1 Quart (Part No.149D6C)
from
$10.49
Castrol GTX High Mileage 10W-30 is the No. 1 consumer high-mileage brand of motor oil. It’s a synthetic blend engine oil that helps extend the life of engines by protecting against sludge, wear and burn-off. Engineered with Phosphorous Replacement Technology, it also protects emission systems by replacing some of the phosphorous that can damage catalytic converters.
Product Features:
See More
Product Features:
- Phosphorus Replacement Technology to help extend the life of the emission system
- Superior dispersancy that fights sludge build up
- Exceptional oil burn-off protection exceeding industry standards (1)
- Seal conditioners to help reduce leaks
- Advanced additives that minimize engine wear
- Improved fuel economy (2)
- (1) Based on API and ACEA volatility specifications
- Meets or exceeds the following specifications:
- (2) In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
- Meets or exceeds the following specifications:
- API SP/SN PLUS/SM
- ILSAC GF-6
Castrol – EDGE 10W-30 Advanced Full Synthetic Motor Oil, 5 Quarts (Part No.1598B6)
from
$37.99
Castrol EDGE 10W-30 is an advanced full synthetic motor oil and the optimal choice for drivers who want the best combination of wear protection, viscosity control and thermal stability to maximize engine performance. It is one of Castrols strongest engine oils with the strength to maintain this unsurpassed level of engine protection for up to 20,000 miles between oil changes or one year.
Product Features:
See More
Product Features:
- 3X Stronger than the leading full synthetic (1)
- 10X Better high stress performance (2)
- 20,000 miles between oil changes (3)
- (1) Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
- (2) As measured in Seq IX test under high load/torque conditions vs. API SP test limits
- (3) Or one year, whichever comes first
- Approved and Licensed Specifications:
- Exceeds API SP/SN PLUS/SN/SM
Castrol – GTX 20W-50 Conventional Motor Oil, 5 Quarts (Part No.15984B)
from
$29.99
Castrol GTX 20W-50 is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life.
Product Features:
See More
Product Features:
- Advanced protection against viscosity and thermal breakdown
- Superior protection against engine sludge
- Premium quality base oils and anti-wear additives to help extend the life of your engine
- Helps minimize oil consumption
- Meets or exceeds the following specifications:
- API SP/SN PLUS/SN/SM
Castrol – EDGE 10W-30 Advanced Full Synthetic Motor Oil, 1 Quart (Part No.152E4E)
from
$11.99
Castrol EDGE 10W-30 is an advanced full synthetic motor oil and the optimal choice for drivers who want the best combination of wear protection, viscosity control and thermal stability to maximize engine performance. It is one of Castrols strongest engine oils with the strength to maintain this unsurpassed level of engine protection for up to 20,000 miles between oil changes or one year.
Product Features:
See More
Product Features:
- 3X Stronger than the leading full synthetic (1)
- 10X Better high stress performance (2)
- 20,000 miles between oil changes (3)
- (1) Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
- (2) As measured in Seq IX test under high load/torque conditions vs. API SP test limits
- (3) Or one year, whichever comes first
- Approved and Licensed Specifications:
- Exceeds API SP/SN PLUS/SN/SM
- ILSAC GF-6
Castrol – GTX 20W-50 Conventional Motor Oil, 1 Quart (Part No.151A8E)
from
$9.99
Castrol GTX 20W-50 is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life.
Product Features:
See More
Product Features:
- Advanced protection against viscosity and thermal breakdown
- Superior protection against engine sludge
- Premium quality base oils and anti-wear additives to help extend the life of your engine
- Helps minimize oil consumption
- Meets or exceeds the following specifications:
- API SP/SN PLUS/SN/SM
Castrol – GTX 10W-40 Conventional Motor Oil, 1 Quart (Part No.14CD5A)
from
$9.99
Castrol GTX 10W-40 is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life.
Product Features:
See More
Product Features:
- Advanced protection against viscosity and thermal breakdown
- Superior protection against engine sludge
- Premium quality base oils and anti-wear additives to help extend the life of your engine
- Helps minimize oil consumption
- (1) When tested in engines with a high level of sludge
- Meets or exceeds the following specifications:
- API SP/SN PLUS/SN/SM
Castrol – EDGE High Mileage 10W-30 Advanced Full Synthetic Motor Oil, 1 Quart (Part No.15979B)
from
$12.99
Castrol EDGE High Mileage 10W-30 is an advanced full synthetic motor oil that is specifically designed for vehicles with over 75,000 miles. It’s been engineered to reduce leaks, burnoff and power robbing deposits, but also contains a proprietary additive to protect the emission system. Our Phosphorus Replacement Technology reduces harmful phosphorus to protect the catalytic converter and extend maximum performance. It is the natural choice for drivers who demand maximum performance from their high mileage car.
Product Features:
See More
Product Features:
- Phosphorus Replacement Technology to help extend the life of the emission system
- Reduces leaks, oil burnoff and power robbing deposits
- 15,000 miles between oil changes (1)
- (1) Or one year, whichever comes first
- Meets or exceeds the following specifications:
- API SP/SN PLUS/SN/SM
- ILSAC GF-6
Castrol – EDGE High Mileage 10W-40 Advanced Full Synthetic Motor Oil, 1 Quart (Part No.15989F)
from
$12.99
Castrol EDGE High Mileage 10W-40 is an advanced full synthetic motor oil that is specifically designed for vehicles with over 75,000 miles. It’s been engineered to reduce leaks, burnoff and power robbing deposits, but also contains a proprietary additive to protect the emission system. Our Phosphorus Replacement Technology reduces harmful phosphorus to protect the catalytic converter and extend maximum performance. It is the natural choice for drivers who demand maximum performance from their high mileage car.
Product Features:
See More
Product Features:
- Phosphorus Replacement Technology to help extend the life of the emission system
- Reduces leaks, oil burnoff and power robbing deposits
- 15,000 miles between oil changes (1)
- (1) Or one year, whichever comes first
- Meets or exceeds the following specifications:
- API SP/SN PLUS/SN/SM
Castrol – Conventional 30W Engine Oil – Protects against thermal breakdown – 1 Qt (Part No.151B00)
from
$8.49
Castrol Conventional 30W Engine Oil is a high-quality monograde oil that provides maximum engine wear protection. It contains dispersants, antioxidants, detergents, and other additives that help to keep the engine clean and running smoothly. This heavy-duty formula is engineered to provide greater protection against thermal breakdown, which can cause engine damage and reduce performance. Castrol Conventional 30W Engine Oil exceeds all passenger car and light-truck manufacturer’s warranty requirements and is made in the USA. It is an ideal choice for those who want to keep their engines running smoothly and efficiently. Protect your engine against thermal breakdown with Castrol Conventional 30W Engine Oil.
Product Features:
See More
Product Features:
- Heavy-duty formula provides maximum engine wear protection in warm climates; designed for use in temperatures above 40 Deg. F
- Contains dispersants, antioxidants, detergents and varnish inhibitors that help prevent ring-sticking and build up of harmful engine deposits
- Engineered for greater protection against thermal breakdown
- Exceeds all passenger car and light-truck manufacturers’ warranty requirements for the protection of gasoline and turbocharged engines where api sm, sl, sj or sh is recommended
- Made in the usa
- Thermal Protection: GTX Engine Oil, SAE 30 provides superior protection against thermal breakdown, ensuring your engine stays cool and running smoothly.
Castrol – GTX 10W-40 Conventional Motor Oil, 5 Quarts (Part No.15982E)
from
$31.99
Castrol GTX 10W-40 is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards. Sludge is a thick, tar like substance caused by severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals. Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life.
Product Features:
See More
Product Features:
- Advanced protection against viscosity and thermal breakdown
- Superior protection against engine sludge
- Premium quality base oils and anti-wear additives to help extend the life of your engine
- Helps minimize oil consumption
- (1) When tested in engines with a high level of sludge
- Meets or exceeds the following specifications:
- API SP/SN PLUS/SN/SM
Valvoline – High Mileage with MaxLife Technology Synthetic Blend 10W-30 Motor Oil: Maximize Engine Life, 5 Quart (Part No.779462)
from
$31.99
75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.
Product Features:
See More
Product Features:
- MAXLIFE TECHNOLOGY PREVENTS engine breakdown with 40% better wear protection than the industry standard
- REFRESH AGING SEALS AND PREVENT LEAKS with seal conditioners
- REDUCE SLUDGE, DEPOSITS, CORROSION, AND RUST with added detergents – keep motors clean inside
- ENHANCED FRICTION PERFORMANCE HELPS MAXIMIZE POWER with advanced friction-fighting agents
- MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN
- MaxLife Technology: Valvoline High Mileage with MaxLife Technology is specially formulated to maximize engine life in vehicles with over 75,000 miles, providing superior protection against wear, friction, heat, and deposits.
- Synthetic Blend Composition: This motor oil features a unique combination of synthetic and premium conventional oils, ensuring optimal performance and protection for high-mileage engines.
Castrol – EDGE High Mileage 10W-30 Advanced Full Synthetic Motor Oil, 5 Quarts (Part No.15906F)
from
$38.99
Castrol EDGE High Mileage 10W-30 is an advanced full synthetic motor oil that is specifically designed for vehicles with over 75,000 miles. It’s been engineered to reduce leaks, burnoff and power robbing deposits, but also contains a proprietary additive to protect the emission system. Our Phosphorus Replacement Technology reduces harmful phosphorus to protect the catalytic converter and extend maximum performance. It is the natural choice for drivers who demand maximum performance from their high mileage car.
Product Features:
See More
Product Features:
- Phosphorus Replacement Technology to help extend the life of the emission system
- Reduces leaks, oil burnoff and power robbing deposits
- 15,000 miles between oil changes (1)
- (1) Or one year, whichever comes first
- Meets or exceeds the following specifications:
- API SP/SN PLUS/SN/SM
- ILSAC GF-6
FRAM – 5W-30 Full Synthetic Motor Oil: 5 Quart (Part No.F930-5QT)
from
$27.99
FRAM Engine Oil Full Synthetic SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos1 Gen 3 and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil Full Synthetic SAE 5W-30 and is a fully licensed GM dexos1 Gen 3 motor oil.
Product Features:
See More
Product Features:
- Faster oil flow at start-up
- Fuel efficiency gains over heavier grade oils
- Excellent sludge and varnish protection
- Outstanding thermal and oxidation stability
- Lowers oil vaporization and consumption at extreme conditions
- ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
- Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 5W-30 meets stringent API: SP, SN, SM, SL, SJ, GM Dexos1 Gen 3, and ILSAC GF-6A specifications, ensuring top-tier protection for your engine.
- Advanced Additive Technology: Specifically formulated to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs, reducing the risk of premature engine failure.
- Enhanced Wear Protection: Provides increased wear protection, oxidation, and shear stability over previous oil categories, extending the life of your engine.
- Versatile Compatibility: Suitable for use in carbureted, normally fuel-injected engines, and the rigorous environment of GDI and TGDI engines, offering broad application versatility.
- Fully Licensed GM dexos1 Gen 3: This oil is a fully licensed GM dexos1 Gen 3 motor oil, ensuring it meets the high standards set by General Motors for optimal engine performance.
FRAM – 5 Qt Conventional 5W30 Engine Oil with Low-Speed Pre-Ignition Control (Part No.F620-5QT)
from
$25.99
FRAM Engine Oil SAE 5W-30 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.
Product Features:
See More
Product Features:
- Low-speed pre-ignition control
- Chain wear protection
- Piston cleanliness
- Turbo-compatibility
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
- Reliable engine protection: FRAM Conventional Oil 5W30 5 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.
FRAM – Full Synthetic High Mileage 5W-30 Engine Oil: 5 Quart (Part No.F933-5QT)
from
$28.99
FRAM Full Synthetic High Mileage SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 5W-30 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 5W-30 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.
Product Features:
See More
Product Features:
- Faster oil flow at start-up
- Fuel efficiency gains over heavier grade oils
- Reduces oil cumsumption
- Excellent sludge and varnish protection
- Slows engine leaks
- Outstanding thermal and oxidation stability
- Lowers oil vaporization and consumption at extreme conditions
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
FRAM – 5 Qt Engine Oil High Milage Conventional 5W30 Restores Seals to Reduce Oil Consumption (Part No.F660-5QT)
from
$25.99
FRAM Conventional High Mileage 5W30 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 5W30 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF, and 5W30 grades will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.
Product Features:
See More
Product Features:
- Formulated with a unique combination of premium base oils and an enhanced additive system
- Provides increased protection in higher mileage engines
- Helps restore seal condition to reduce oil consumption
- Increases protection against high temperature deposits and ring sticking
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
- Specially formulated for engines with over 75,000 miles to help reduce leaks and oil consumption.
FRAM – 5W-30 Full Synthetic Motor Oil: 1 Quart (Part No.F930)
from
$7.49
FRAM Engine Oil Full Synthetic SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos1 Gen 3 and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil Full Synthetic SAE 5W-30 and is a fully licensed GM dexos1 Gen 3 motor oil.
Product Features:
See More
Product Features:
- Faster oil flow at start-up
- Fuel efficiency gains over heavier grade oils
- Excellent sludge and varnish protection
- Outstanding thermal and oxidation stability
- Lowers oil vaporization and consumption at extreme conditions
- ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
- Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 5W-30 meets stringent API: SP, SN, SM, SL, SJ, GM Dexos1 Gen 3, and ILSAC GF-6A specifications, ensuring top-tier protection for your engine.
- Advanced Additive Technology: Specifically formulated to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs, reducing the risk of premature engine failure.
- Enhanced Wear Protection: Provides increased wear protection, oxidation, and shear stability over previous oil categories, extending the life of your engine.
- Versatile Compatibility: Suitable for use in carbureted, normally fuel-injected engines, and the rigorous environment of GDI and TGDI engines, offering broad application versatility.
- Fully Licensed GM dexos1 Gen 3: This oil is a fully licensed GM dexos1 Gen 3 motor oil, ensuring it meets the high standards set by General Motors for optimal engine performance.
FRAM – 5W-30 Conventional Motor Oil with Low-Speed Pre-Ignition Control, 1 Quart (Part No.F620)
from
$6.49
FRAM Engine Oil SAE 5W-30 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.
Product Features:
See More
Product Features:
- Low-speed pre-ignition control
- Chain wear protection
- Piston cleanliness
- Turbo-compatibility
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
- Reliable engine protection: FRAM Conventional Oil 5W30 1 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.
FRAM – Conventional 10W30 Engine Oil with Low-Speed Pre-Ignition Control – 5 Qt (Part No.F630-5QT)
from
$25.99
FRAM Engine Oil SAE 10W-30 utilizes a blend of high-quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 10W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.
Product Features:
See More
Product Features:
- Low-speed pre-ignition control
- Chain wear protection
- Piston cleanliness
- Turbo-compatibility
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
- Suitable for modern engines: Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs.
FRAM – 10W-30 High Mileage Conventional Motor Oil, Reduces Oil Consumption, 5 Quart (Part No.F665-5QT)
from
$25.99
FRAM Conventional High Mileage 10W30 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 10W30 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF, and 10W30 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.
Product Features:
See More
Product Features:
- Formulated with a unique combination of premium base oils and an enhanced additive system
- Provides increased protection in higher mileage engines
- Helps restore seal condition to reduce oil consumption
- Increases protection against high temperature deposits and ring sticking
- ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
- Sludge Cleanup and Engine Efficiency: Formulated to help clean out sludge buildup, keeping engines running clean with increased efficiency and power.
- Versatile Compatibility: Protects domestic and imported vehicles and equipment powered by gasoline or light-duty diesel engines, including turbocharged and supercharged engines.
- Meets Stringent Standards: Formulated to meet or exceed all new car manufacturers’ warranty requirements and stringent industry standards API SP/CF, and ILSAC GF-6A Resource Conserving Service Category.
FRAM – 10W-30 Conventional Motor Oil, Prevents Low-Speed Pre-Ignition, 1 Quart (Part No.F630)
from
$6.49
FRAM Engine Oil SAE 10W-30 utilizes a blend of high-quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 10W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.
Product Features:
See More
Product Features:
- Low-Speed Pre-Ignition Control
- Chain Wear Protection
- Piston Cleanliness
- Turbo-Compatibility
- ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
- Versatile Compatibility: Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI), as well as older carbureted or normally fuel-injected gasoline engine designs.
- High-Quality Conventional Base Stocks: Utilizes a blend of high-quality conventional base stocks to ensure reliable engine protection across a broad range of operating conditions.
- Meets Stringent Standards: Complies with API SP, SN Plus, SN, SM, and ILSAC GF-6A, GF-5, and earlier API and ILSAC Service Categories, ensuring it meets the latest industry requirements.
- SAE oil weight of 10W-30, making it a dependable choice for various engine types.
FRAM – High Milage Conventional 5W-30 Motor Oil – Helps Restore Seal Condition, 1 Quart (Part No.F660)
from
$6.49
FRAM Conventional High Mileage 5W30 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 5W30 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF, and 5W30 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.
Product Features:
See More
Product Features:
- Formulated with a unique combination of premium base oils and an enhanced additive system
- Provides increased protection in higher mileage engines
- Helps restore seal condition to reduce oil consumption
- Increases protection against high temperature deposits and ring sticking
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
- Specially formulated for engines with over 75,000 miles to help reduce leaks and oil consumption.
FRAM – Full Synthetic High Mileage 10W-30 Motor Oil: 5 Quart (Part No.F943-5QT)
from
$28.99
FRAM Full Synthetic High Mileage SAE 10W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 10W-30 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 10W-30 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.
Product Features:
See More
Product Features:
- Faster oil flow at start-up
- Fuel efficiency gains over heavier grade oils
- Reduces oil cumsumption
- Excellent sludge and varnish protection
- Slows engine leaks
- Outstanding thermal and oxidation stability
- Lowers oil vaporization and consumption at extreme conditions
- ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
- Engine Cleaning and Efficiency: Helps clean out sludge buildup, keeping engines running clean with increased efficiency and power, ideal for engines with over 75,000 miles.
- Advanced LSPI Prevention: Contains additive technology designed to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs.
- Comprehensive Engine Protection: Provides increased wear protection, oxidation, and shear stability for higher mileage vehicles, meeting stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications.
FRAM – 10W-30 Full Synthetic Motor Oil, Ultimate Protection, 5 Quarts (Part No.F940-5QT)
from
$27.99
FRAM Engine Oil Full Synthetic SAE 10W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories.
Product Features:
See More
Product Features:
- Outstanding thermal and oxidation stability
- Excellent sludge and varnish protection
- Faster oil flow at start-up
- Volatility: Lowers oil vaporization and consumption at extreme conditions
- ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
- Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 10W-30 is formulated with high-quality synthetic base stocks and the latest additive technology to provide the ultimate protection for your engine.
- Advanced LSPI Prevention: Contains additive technology specifically designed to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct injection (GDI) and turbo gas-direct injection (TGDI) engines.
- Enhanced Wear Protection: Offers increased wear protection, ensuring your engine components remain in optimal condition even under rigorous driving conditions.
- Versatile Engine Compatibility: Suitable for a wide range of engines, including GDI, TGDI, carbureted, and normally fuel-injected engines, making it a versatile choice for various vehicle types.
FRAM – Full Synthetic High Mileage 5W-30 Motor Oil: 1 Quart (Part No.F933)
from
$7.99
FRAM Full Synthetic High Mileage SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 5W-30 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 5W-30 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.
Product Features:
See More
Product Features:
- Faster oil flow at start-up
- Fuel efficiency gains over heavier grade oils
- Reduces oil cumsumption
- Excellent sludge and varnish protection
- Slows engine leaks
- Outstanding thermal and oxidation stability
- Lowers oil vaporization and consumption at extreme conditions
- ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
- Engine Cleaning and Efficiency: Helps clean out sludge buildup, keeping engines running clean with increased efficiency and power, ideal for engines with over 75,000 miles.
- Advanced LSPI Prevention: Contains additive technology designed to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct injection (GDI) and turbo gas-direct injection (TGDI) engines.
- Comprehensive Engine Protection: Provides increased wear protection, oxidation, and shear stability for higher mileage vehicles, meeting stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications.
FRAM – High Milage Conventional 10W-30 Motor Oil – Helps Restore Seal Condition, 1 Quart (Part No.F665)
from
$6.49
FRAM Conventional High Mileage 10W30 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 10W30 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF, and 10W30 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.
Product Features:
See More
Product Features:
- Formulated with a unique combination of premium base oils and an enhanced additive system
- Provides increased protection in higher mileage engines
- Helps restore seal condition to reduce oil consumption
- Increases protection against high temperature deposits and ring sticking
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
- Specially formulated for high mileage engines: FRAM High Mileage 10W30 Engine Oil is designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines, making it the perfect choice for vehicles with over 75,000 mi
FRAM – Straight-Viscosity 30W Conventional Motor Oil, Reduces Motor Wear, 1 Quart (Part No.F530)
from
$6.49
FRAM Engine Oil SAE 30 is single grade or straight-viscosity motor oil that meets the stringent API SP, SN Plus / SN, SM, SL & CF specifications. It contains a balanced blend of high VI base stocks and an advanced additive package to deliver superior performance. It is designed to provide thermal and oxidation stability, deposit control, anti-wear protection, corrosion protection and improved pumpability. FRAM Engine Oil SAE 30 may be used in turbo-charged or naturally aspirated foreign and domestic engines recommending straight weight API SP/CF quality oil. This motor oil exceeds the stringent lubricating performance requirements of American, European, Korean, Japanese and other worldwide engine manufacturers where straight weight engine oil is recommended.
Product Features:
See More
Product Features:
- Resists breakdown in severe engine environments
- Effectively prevents the formation of sludge and varnish deposits
- Reduces engine wear
- Turbo approved
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
- Superior Performance: FRAM Engine Oil SAE 30 is formulated with a balanced blend of high VI base stocks and advanced additives to deliver superior performance, ensuring your engine runs smoothly and efficiently.
FRAM – 10W-30 Small Engine 10W-30 Conventional Oil: 1 Quart (Part No.464-32)
from
$7.29
10W-30 Small Engine 10W-30 Conventional Oil: 1 Quart
FRAM – Conventional 10W40 Engine Oil with Low-Speed Pre-Ignition Control, 5 Quart (Part No.F640-5QT)
from
$25.99
FRAM Engine Oil SAE 10W-40 engine oil utilizes high-quality base stocks and a robustï additive system to provide reliable engine protection across a broad range of operatingï conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engineï designs. FRAM Engine Oil SAE 10W-40 contains additive technology designed to preventï low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation andï shear stability over previous oil categories. The FRAM Engine Oil SAE 10W-40 meets theï requirements for API SP, SN Plus, SN, SM and earlier API Service Categories.
Product Features:
See More
Product Features:
- Low-speed pre-ignition control
- Chain wear protection
- Piston cleanliness
- Turbo-compatibility
- Low-speed pre-ignition control
- Chain wear protection
- Piston cleanliness
- Turbo-compatibility
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
FRAM – 30W Small Engine 30W Conventional Oil: 1 Quart (Part No.463-32)
from
$7.29
30W Small Engine 30W Conventional Oil: 1 Quart
FRAM – Full Synthetic 10W-30 Motor Oil – Helps Extend Motor Life, 1 Quart (Part No.F940)
from
$7.49
FRAM Engine Oil Full Synthetic SAE 10W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories.
Product Features:
See More
Product Features:
- Outstanding thermal and oxidation stability
- Excellent sludge and varnish protection
- Faster oil flow at start-up
- Volatility: lowers oil vaporization and consumption at extreme conditions
- Always refer to your vehicles operating manual to select the correct grade oil for your engine.
- Ultimate engine protection: FRAM Full Synthetic Oil 10W30 1 QT is specifically formulated with high-quality synthetic base stocks and advanced additive technology to provide the ultimate protection for your engine, ensuring its longevity and performance.
FRAM – 10W-40 High Mileage Conventional Motor Oil, Helps Reduce Leaks, 5 Quart (Part No.F670-5QT)
from
$25.99
FRAM Conventional High Mileage 10W40 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 10W40 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF.
Product Features:
See More
Product Features:
- Formulated with a unique combination of premium base oils and an enhanced additive system
- Provides increased protection in higher mileage engines
- Helps restore seal condition to reduce oil consumption
- Increases protection against high temperature deposits and ring sticking
- ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
- Engine Cleaning and Efficiency: Formulated to help clean out sludge buildup, keeping engines running clean with increased efficiency and power.
- Versatile Protection: Suitable for domestic and imported vehicles and equipment powered by gasoline or light-duty diesel engines, including turbocharged and supercharged engines.
- Meets Stringent Standards: Formulated to meet or exceed all new car manufacturers’ warranty requirements and stringent industry standards API SP/CF.
Top-Rated Oil and Lubricants Brands For Your 1983 Dodge 400
Shop for the best-rated brands offering Oil and Lubricants and other products for your 1983 Dodge 400s. Below you’ll find some of our best rated Oil and Lubricants from Castrol and Valvoline, and more. Oil and Lubricants from these brands that fit a 1983 400 start at just $8.49 and are rated as high as 5 stars. OEM and aftermarket Oil and Lubricants don’t get more top quality, durable, and affordable than from the brands below.
Popular Castrol 1983 Dodge 400 Oil and Lubricants
When it comes to maintaining or upgrading your 1983 Dodge 400, using quality Oil and Lubricants is essential to ensure durability and a perfect fit. Castrol ticks all of those boxes. We offer a wide selection of Castrol Oil and Lubricants, specifically designed for the 1983 Dodge 400. With over 28 Castrol brand Oil and Lubricants in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $8.49, with an average price of just $20.33. Plus, with over 4,397 customer reviews and an average rating of 5 stars, you can trust that our Castrol Oil and Lubricants will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$11.49
$11.49
This product is not rated
EDGE Euro 5W-30 K Advanced Full Synthetic Motor Oil, 1 Quart
“”
from
$11.99
$11.99
This product is not rated
5W-30 Full Synthetic Motor Oil, Helps Maximize Motor Performance, 1 Quart
“”
Popular Valvoline 1983 Dodge 400 Oil and Lubricants
Valvoline auto parts is one of the highest quality Oil and Lubricant brands in the market. Any 1983 Dodge 400 owner should feel confident when installing genuine Valvoline parts in their vehicle. To ensure the best fit and performance for your 1983 400, Advance Auto Parts carries a full inventory of 2 Valvoline Oil and Lubricants. Plus you will be keeping your Dodge in peak condition while saving money because prices on these Valvoline Oil and Lubricants range from $29.99 to $31.99, plus, with more than 742 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Oil and Lubricants below will deliver on both quality and value.
from
$29.99
$29.99
(371)
“Best price in town”
from
$31.99
$31.99
(371)
High Mileage with MaxLife Technology Synthetic Blend 10W-30 Motor Oil: Maximize Engine Life, 5 Quart
“Good oil.”
FAQs for 1983 Dodge 400 Oil and Lubricants
Which Oil and Lubricants are best-sellers for 1983 Dodge 400s?
Out of 55 Oil and Lubricants that fit 1983 Dodge 400s, the following parts are the top sellers:
- EDGE High Mileage 5W-30 Advanced Full Synthetic Engine Oil, 5 Qt (11481244) – $38.99
- 5W-30 Full Synthetic Motor Oil: 5 Quart (12260437) – $27.99
- EDGE Euro 5W-40 A3/B4 Advanced Full Synthetic Motor Oil, 5 Quarts (11946442) – $37.99
What’s the price range for 1983 Dodge 400 Oil and Lubricants?
Oil and Lubricant prices for the 1983 Dodge 400 start at $6.49 and go up to $38.99 for the most premium parts.
What’s the average price of a Oil and Lubricant for a 1983 Dodge 400?
The average price for Oil and Lubricants for the 1983 Dodge 400 is $18.67. Keep in mind the variety of part types within our Oil and Lubricant category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Oil and Lubricants for other Dodge 400 model years?
Yes, we currently carry Oil and Lubricants for 1 model years of Dodge 400s between 1982 and 1982. Oil and Lubricants are bought most frequently for the following model years: 1982.
What are the cheapest Oil and Lubricants for my 1983 Dodge 400?
The cheapest 1983 Dodge 400 Oil and Lubricants we carry in stock are:
- 5W-30 Conventional Motor Oil with Low-Speed Pre-Ignition Control, 1 Quart (12260426) – $6.49
- 10W-30 Conventional Motor Oil, Prevents Low-Speed Pre-Ignition, 1 Quart (12260508) – $6.49
- High Milage Conventional 5W-30 Motor Oil – Helps Restore Seal Condition, 1 Quart (12260455) – $6.49
- High Milage Conventional 10W-30 Motor Oil – Helps Restore Seal Condition, 1 Quart (12260532) – $6.49
- Straight-Viscosity 30W Conventional Motor Oil, Reduces Motor Wear, 1 Quart (12260528) – $6.49
What are the top-rated Oil and Lubricants that fit the 1983 Dodge 400?
Out of 10,278 reviews by customers, our 1983 Dodge 400 Oil and Lubricants have an average customer rating of . These are some of the highest-rated Oil and Lubricant types for the 1983 Dodge 400 and their top-rated products:
- Motor Oil
- EDGE Euro Car 5W-30 C3 Full Synthetic Motor Oil, 1 Quart (11252054) – $12.49
- EDGE High Mileage 5W-30 Advanced Full Synthetic Engine Oil, 5 Qt (11481244) – $38.99
- High Mileage with MaxLife Technology Synthetic Blend 10W-30 Engine Oil: Maximize Engine Life, 5 Quart (11707040) – $29.99
What types of Oil and Lubricants do you sell for my 1983 Dodge 400?
As of 2/5/25, these are some of the most in-demand types of Oil and Lubricants for a 1983 Dodge 400:
Can I get help with 1983 Dodge 400 Oil and Lubricant orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Dodge Oil and Lubricants and more.
What is your return policy for Dodge 400 Oil and Lubricants?
Advance Auto Parts keeps returns simple. For new Dodge 400 Oil and Lubricants and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
