1983 Chevrolet S10 Blazer Performance and Racing Products

Essential Performance and Racing Products for 1983 Chevrolet S10 Blazers

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

Promaster Classic Series; Ignition Coil

from

$186.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

Product Features:
  • Glass Filled Polyester Case
  • Longer Spark Duration
  • Increased Performance
  • No Energy Loss Due To Arcing
  • Includes Brass Contact Terminal
See More

Mallory – Unilite Ignition Module (Part No.605)

Unilite Ignition Module

from

$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:
  • Service Part
  • No Moving Parts To Wear Out
  • Self Contained Unit
  • Can Drive OEM
  • Can Drive High Performance Ignition Coils
See More

Edelbrock – Intake Manifold Gasket for 1985-1995, Chevy V6 200-229-262 (Part No.7209)

Intake Manifold Gasket for 1985-1995, Chevy V6 200-229-262

from

$27.99
Edelbrock part #7209 Intake Gaskets for 1985-1995, Chevy V6 200-229-262 (3.8 and 4.3L) allow for optimum flow and performance. Any gasket can create a seal, but a good gasket can do it with less clamping force, and for a longer period of time. The new MP-

Product Features:
  • 1.28″x2.10″
  • Stock Port Style
  • .060″ Thick
  • Multi Piece Configuration
  • Composite Material
See More

B & M – Automatic Shifter, Quicksilver 4 Speed (Part No.80683)

Automatic Shifter, Quicksilver 4 Speed

from

$439.99
The B&M Quicksilver features a ratcheting action for positive shifts, Chrome Knob, neutral safety switch, NHRA/IHRA approved Reverse Lockout. Fits Most 3 and 4 speeds.

Product Features:
  • Universal Floor Mount Application
  • Base Trimmed For Custom Fit
  • Cable Operated
  • Quick Installation
  • Accurate Shifting
See More

Mr. Gasket – Thermocap Radiator Cap (Part No.2476BK)

Thermocap Radiator Cap

from

$48.09
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

Product Features:
  • Indicates coolant temperature
  • Helps prevent coolant injuries
  • Fahrenheit and centigrade readings
  • Color-coded temperature ranges
  • Integrated coolant reclamation valve
  • Improves under-hood appearance
  • Chromed crown with a colored trim ring
See More

Lakewood – Drag Shock-70/30:GM (Part No.40120)

Drag Shock-70/30:GM

from

$104.99
The best all-round choice for vehicles with leaf or coil springs. Properly loads rear wheels to prevent over-reaction and wheel hop.

Product Features:
  • Excellent Weight Transfer
  • Lets Front End Down Quickly
  • Maximum Traction
  • Makes Vehicle Safer
  • Easier Control At End Of Track
  • Better Overall Stability
See More

Flowmaster Inc. – 50 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Moderate Sound (Part No.942451)

50 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Moderate Sound

from

$154.99
The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

Powertrax – Lock Right Locker (Part No.1931-LR)

Lock Right Locker

from

$444.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Energy Suspension – Control Arm Bushing Set (Part No.3.3162G)

    Control Arm Bushing Set

    from

    $116.99
    For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

    Product Features:
    • Maintains Better Alignment While Driving
    • Full Floating and Non Binding
    • Fits Into the Remaining Stock Control Arms
    See More

    Mr. Gasket – Differential Cover Kit (Part No.9891)

    Differential Cover Kit

    from

    $65.99
    Add some bling to the underside of your car with Mr. Gasket’s chrome differential cover. This chrome-plated steel cover is made to fit GM 10-bolt with 8 1/2 in ring gear. Is a complete kit with a gasket and bolts.

    Product Features:
    • Made Of Chrome Plated Steel
    • Fits GM 8.5-Inch 10 Bolt
    • Complete Kit With Gasket And Bolts
    See More

    Earls Performance Product – Brake Bleeder Screws (Part No.280022ERL)

    Brake Bleeder Screws

    from

    $32.59
    Brake Bleeder Screws

    Edelbrock – XX Performer EGR Top Intake Manifold (Part No.3787)

    XX Performer EGR Top Intake Manifold

    from

    $113.99


    Product Features:
    • Matching Top For Edelbrock Base Intake PN[3785]
    • Designed for OEM 2-barrel Carburetor
    • Contains Necessary Linkage And Bracketry
    • 50-State Street Legal if Correct Carburetor Used
    • Accepts Stock EGR Connections
    • Match With Edelbrock Valve Covers Pn[4488]
    See More

    Energy Suspension – Leaf Spring Bushing Set (Part No.3.2129G)

    Leaf Spring Bushing Set

    from

    $70.99
    Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.

    Product Features:
    • Made of Superior Hyper-Flex+ Material
    • Adds Dramatic Amount of Performance/Durability
    • Helps Vehicle Be in Control
    • Allows the Suspension to Function Properly
    See More

    Mr. Gasket – Starter Motor Heat Shield (Part No.3678)

    Starter Motor Heat Shield

    from

    $43.99
    Fits Chevy small block 265-400 CID, Chevy big block 396-454 CID, & 90 degree Chevy V6. The Starter Motor Heat Shield is built with heat-resistant material sandwiched between two aluminum plates. The shield protects the starter from heat buildup from the exhaust system, especially important when using headers.

    Product Features:
    • Designed to prevent starter overheat due to extreme exhaust temperature
    • Heat resistant material sandwiched between 2 aluminum plates
    • Protects Starter From High Temperatures
    • Made Of 2 Sheets Of Aluminum Heat Resistant Center
    • Natural Finish
    See More

    Energy Suspension – Coil Spring Isolator Set (Part No.9.6102R)

    Coil Spring Isolator Set

    from

    $43.99
    Made of superior Hyper-Flex material. Saves replacing again and again, lasting 3 to 10 times longer. Assemble to chassis the same way as OEM isolators and do not adversely change ride characteristics.

    Product Features:
    • Made of Superior Hyper-Flex+ Material
    • Lasts from 3 to 10 Times Longer
    • Assemble to Chassis Same Way as OEM
    • Maintains Factory Ride Characteristics
    • Simple Way to Increase Vehicle Height
    See More

    Edelbrock – Signature Series Valve Covers: Chevrolet 2.8L, 60░ V6, 1982-93, Chrome Steel (Part No.4488)

    Signature Series Valve Covers: Chevrolet 2.8L, 60░ V6, 1982-93, Chrome Steel

    from

    $119.99
    The Edelbrock #4488 Signature Series Valve Covers are designed for Chevrolet 2.8L 60 Deg V6 ’82-93 applications. Engineered for function and styled for great looks, Signature Series valve covers have stock-style breather baffles that prevent oil passage to the PCV valve. These quality valve covers accept all emissions equipment, including PCV valve holes. Rubber grommets for the breather and PCV valve holes are included. Matching breathers sold separately.

    Product Features:
    • Chevrolet 2.8L, 60 Degree, 1982-93
    • Short
    • Chrome Steel
    • Set Of Two
    • Rubber Grommets For Breather
    See More

    B & M – Torque Converter, Nitrous Holeshot 3600 (Part No.20482)

    Torque Converter, Nitrous Holeshot 3600

    from

    $665.99
    Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.

    Product Features:
    • 3400-3800 RPM
    • Small And Big Blocks
    • Serious Performance
    • Furnace Brazed
    • Fully Balanced
    See More

    Mr. Gasket – A/Tdipstick (Part No.9704G)

    A/Tdipstick

    from

    $79.99
    Billet aluminum handle with flexible braded steel tube mounts to the firewall. 29-3/4 inch long.

    Product Features:
    • Braided Stainless Steel
    • Firewall Mounting
    • Includes Oil Fill Tube
    See More

    Motive Gear – Performance Differential Ring and Pinion (Part No.G885342)

    Performance Differential Ring and Pinion

    from

    $322.99


    Product Features:
    • GM 10BL 8.5 R/P 3.42 FRT/REAR MGP
    See More

    Flowtech – Standard Header (Part No.11502FLT)

    Standard Header

    from

    $302.99


    Product Features:
    • Fuel Economy From The Engine
    • Leak Test For Max Performance
    • Mandrel-Formed Power Plenum
    • Leakproof O-Ringed Port Seals
    • Include All Mounting Hardware
    See More

    FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1624)

    Engine Valve Cover Gasket Set

    from

    $24.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
    • Not intended for use in emission controlled vehicles.
    See More

    Energy Suspension – Sway Bar Bushing Set (Part No.3.5126G)

    Sway Bar Bushing Set

    from

    $46.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Zerk Type Fittings
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More

    Energy Suspension – Control Arm Bushing Set (Part No.3.3170R)

    Control Arm Bushing Set

    from

    $57.99
    For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

    Product Features:
    • Maintains Better Alignment While Driving
    • Full Floating and Non Binding
    • Fits Into the Remaining Stock Control Arms
    See More

    Lakewood – Trans Mount: Urethane-Chevy (Part No.24350)

    Trans Mount: Urethane-Chevy

    from

    $84.99
    Constructed of durable polyurethane to handle the stress oh high horsepower. Absorbs vibration and lasts longer than rubber Features unique built-in safety lock to keep from separating under high torque loads. Ideal for use on street or strip applications. Complete with grade-8 mounting hardware.

    Product Features:
    • Durable Polyurethane
    • Absorbs Vibration
    • Last Longer Than Rubber
    • Built-In Safety Lock
    See More

    Energy Suspension – Body Cab Mount Set (Part No.3.4132R)

    Body Cab Mount Set

    from

    $225.99
    Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

    Product Features:
    • Assures Longer Lasting Cab to Bed Alignment
    • Replace to Restore Ride Height
    • Gain Durability
    • Stronger Than Original Rubber Mounts
    See More

    Energy Suspension – Differential Carrier Bracket Bushing Set (Part No.3.1105G)

    Differential Carrier Bracket Bushing Set

    from

    $27.99
    Product Features:
    • Made of Superior Hyper-Flex+ Material
    See More

    Energy Suspension – Sway Bar Bushing Set (Part No.3.5121R)

    Sway Bar Bushing Set

    from

    $27.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Zerk Type Fittings
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More

    Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)

    Tie Rod Dust Boot

    from

    $9.99
    Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

    Product Features:
    • Easy to Install
    • Superior Material
    • Saves Your Tie Rods
    • Lasts Longer
    • Looks Great
    See More

    Upgrade your 1983 Chevrolet S10 Blazer with Top-Quality Performance and Racing Products

    When it comes to maintaining or upgrading your 1983 Chevrolet S10 Blazer, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Performance and Racing Products are key to keeping your S10 Blazer functioning at its best. At Advance Auto Parts, we offer a wide selection of 74 Performance and Racing Products for the 1983 Chevrolet S10 Blazer, designed to meet your needs without breaking the bank. From Performance Steering Product replacements to Performance Distributors upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

    Affordable Prices and Wide Selection

    Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1983 Chevrolet S10 Blazer at great prices. Our Performance and Racing Products inventory for this model ranges from just $9.99 to $665.99, with an average price of $184.29. Our 74 Performance and Racing Products in stock come from 17 trusted brands, so you’re sure to find the right part for your 1983 Chevrolet S10 Blazer without overspending.

    Top Brands and High Customer Satisfaction

    Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1983 Chevrolet S10 Blazer, we stock popular OEM and aftermarket Performance and Racing Products from top names like Accel, Energy Suspension, Mr. Gasket, and more. Accel Performance and Racing Products start at just $32.88 and boast an impressive 4 stars average rating from customers. Energy Suspension and Mr. Gasket also bring quality to the table, with Performance and Racing Products available starting at $9.99, and at an average 4 stars rating. With 227 customer reviews and counting, our 1983 Chevrolet S10 Blazer Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

    Explore Related Parts and More

    While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1983 Chevrolet S10 Blazer is always ready to roll. We’re committed to providing you with everything you need to keep your S10 Blazer in top shape, all in one place. Start shopping confidently below for your 1983 Chevrolet S10 Blazer!

    Best-Selling Performance Steering Products for 1983 Chevrolet S10 Blazers

    Enhance the driving experience in your Chevrolet with 9 quality Performance Steering Product components, starting at $9.99.

    Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)

    Tie Rod Dust Boot

    from

    $9.99
    Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

    Product Features:
    • Easy to Install
    • Superior Material
    • Saves Your Tie Rods
    • Lasts Longer
    • Looks Great
    See More

    Energy Suspension – Body Cab Mount Set (Part No.3.4132G)

    Body Cab Mount Set

    from

    $242.99
    Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

    Product Features:
    • Assures Longer Lasting Cab to Bed Alignment
    • Replace to Restore Ride Height
    • Gain Durability
    • Stronger Than Original Rubber Mounts
    See More

    Energy Suspension – Body Cab Mount Set (Part No.3.4132R)

    Body Cab Mount Set

    from

    $225.99
    Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

    Product Features:
    • Assures Longer Lasting Cab to Bed Alignment
    • Replace to Restore Ride Height
    • Gain Durability
    • Stronger Than Original Rubber Mounts
    See More

    Energy Suspension – Sway Bar Bushing Set (Part No.3.5190G)

    Sway Bar Bushing Set

    from

    $49.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Zerk Type Fittings
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More

    Energy Suspension – Sway Bar Bushing Set (Part No.3.5190R)

    Sway Bar Bushing Set

    from

    $49.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Zerk Type Fittings
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More

    Energy Suspension – Sway Bar Bushing Set (Part No.3.5126G)

    Sway Bar Bushing Set

    from

    $46.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Zerk Type Fittings
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More

    Energy Suspension – Sway Bar Bushing Set (Part No.3.5122R)

    Sway Bar Bushing Set

    from

    $49.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Zerk Type Fittings
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More

    Energy Suspension – Sway Bar Bushing Set (Part No.3.5158G)

    Sway Bar Bushing Set

    from

    $27.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Zerk Type Fittings
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More

    Energy Suspension – Sway Bar Bushing Set (Part No.3.5121R)

    Sway Bar Bushing Set

    from

    $27.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Zerk Type Fittings
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More

    Most Popular 1983 Chevrolet S10 Blazer Performance Distributors

    Customize your Chevrolet with 1 Performance Distributors products like Performance Distributor Cap and Rotor Kits, all priced under $32.88.

    Accel – Distributor Cap And Rotor Kit (Part No.8130)

    Distributor Cap And Rotor Kit

    from

    $32.88


    Product Features:
    • Heavy Duty Cap and Rotor Kit
    • With Brass Inserts
    See More

    Top Picks for 1983 Chevrolet S10 Blazer Performance Engines

    Upgrade Chevrolet S10 Blazers with top-quality Performance Engines parts, including 6 OEM and aftermarket selections for your 1983 model.

    FEL-PRO Performance – Lower Intake Manifold Gasket Set: 2 Piece Set (Part No.1270)

    Lower Intake Manifold Gasket Set: 2 Piece Set

    from

    $32.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Fel-Pro performance intake manifold gaskets have been tested with virtually all aftermarket cylinder head and intake manifold combinations.
    • No exhaust crossover openings or blocking shields
    • Embossed steel core laminate w/coating
    • Not intended for use in emission controlled vehicles.
    See More

    B & M – Torque Converter, Nitrous Holeshot 3600 (Part No.20482)

    Torque Converter, Nitrous Holeshot 3600

    from

    $665.99
    Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.

    Product Features:
    • 3400-3800 RPM
    • Small And Big Blocks
    • Serious Performance
    • Furnace Brazed
    • Fully Balanced
    See More

    Edelbrock – Performer Small-Block Chevy 2.8L Intake Manifold (Part No.3785)

    Performer Small-Block Chevy 2.8L Intake Manifold

    from

    $361.99


    Product Features:
    • For Idle to 5500 RPM Street-Driven Performance
    • Excellent Throttle Response and Mid-Range Power
    • 50-State Street Legal if Correct Carburetor Used
    • Ideal for Light-Duty Pickups and Passenger Cars
    • Unique Design Allows Use Of 2 bbl Or 4 bbl Top
    See More

    Edelbrock – Performer Top Small-Block Chevy 4V Intake Manifold (Part No.3789)

    Performer Top Small-Block Chevy 4V Intake Manifold

    from

    $205.99
    Product Features:
    • Matching Top For Edelbrock Base Intake PN[3785]
    • Designed for Standard Flange 4-barrel Carburetor
    • Contains Necessary Linkage And Bracketry
    • Match With Edelbrock Valve Covers Pn[4488]
    See More

    Edelbrock – XX Performer EGR Top Intake Manifold (Part No.3787)

    XX Performer EGR Top Intake Manifold

    from

    $113.99


    Product Features:
    • Matching Top For Edelbrock Base Intake PN[3785]
    • Designed for OEM 2-barrel Carburetor
    • Contains Necessary Linkage And Bracketry
    • 50-State Street Legal if Correct Carburetor Used
    • Accepts Stock EGR Connections
    • Match With Edelbrock Valve Covers Pn[4488]
    See More

    FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1624)

    Engine Valve Cover Gasket Set

    from

    $24.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
    • Not intended for use in emission controlled vehicles.
    See More

    In-Demand Performance Ignition Products for 1983 Chevrolet S10 Blazers

    Select from 6 premium Performance Ignition Products parts for your 1983 Chevrolet S10 Blazer, with prices ranging from $42.49 to $186.99.

    MSD Ignition – High Energy Ignition Coil for GM HEI Distributors (Part No.8225)

    High Energy Ignition Coil for GM HEI Distributors

    from

    $112.99
    HEI owners now have a choice to replace their stock coil with the MSD high energy unitized coil for GM HEI distributors. This coil is a direct replacement of the stock coil and offers increased spark energy when used with the MSD HEI module, PN 83645. The coil features special low induc?tance, high temperature windings which charge faster to give you increased spark energy at higher rpm. The premium epoxy filled construction is designed to withstand harsh race applications as well as the wear and tear that daily usage dishes out, and still deliver more spark energy to the spark plugs.

    Product Features:
    • Direct performance replacement for GM HEI coil-in-cap dist.
    • 70:1 Turns Ratio
    • Lower Primary Resistance Produces High Voltage Output
    • Full Power Sparks To 9000 Rpm w/PN[83647] MSD HEI Module
    See More

    Mallory – Unilite Ignition Module (Part No.605)

    Unilite Ignition Module

    from

    $85.29
    Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

    Product Features:
    • Service Part
    • No Moving Parts To Wear Out
    • Self Contained Unit
    • Can Drive OEM
    • Can Drive High Performance Ignition Coils
    See More

    Accel – Super Stock Replacement Coil for Improved Performance, Starting, and Power (Part No.8140)

    Super Stock Replacement Coil for Improved Performance, Starting, and Power

    from

    $42.49
    Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary

    Product Features:
    • 42000 Volts
    • Effective To 6500 RPM
    • Quicker Starting
    • Improved Throttle Response
    • Higher RPM Power
    • Can Finished In Yellow
    See More

    MSD Ignition – Blaster 2 Coil: High Performance Ignition Upgrade (Part No.8202)

    Blaster 2 Coil: High Performance Ignition Upgrade

    from

    $49.99
    If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.

    Product Features:
    • Improved output coil for electronic ignitions
    • Works w/Blaster Ignition Or MSD 5/6/7 Series
    • Ballast Resistor Required If Used w/Stock Points Ignition
    • Alkyd tower w/high dielectric properties lessens carbon tracking
    See More

    Accel – Supercoil (Part No.140001)

    Supercoil

    from

    $105.99
    Engineered for faster rise time, longer spark duration and increased performance. Unique design with premium grade wire, special low resistance, high turns ratio windings. Produces higher spark energy with breakerless electronic ignition systems. For points application the supplied 0.85 ohm ballast resistor must be used in conjunction with the vehicle original ballast resistor, if so equipped. Oversized molded case with integral cooling fins and high capacity oil filled construction provide high thermal conductivity ensuring cool operation and long life. Extra tall tan Alkyd tower and integral voltage dam eliminate “flashover” to primary terminals. Comes complete with mounting hardware and 0.85 ohm ballast resistor. Effective up to 6,500 RPM.

    Product Features:
    • Oil Filled For Better Cooling
    • Optimized Low Resistance
    • Silicon Magnetic Steel E-Core
    • Higher Energy/Voltage Outputs
    • Quicker Starts
    • Improved Idle Quality
    • Resists Shock And Vibration
    • Resists Corrosion
    See More

    Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

    Promaster Classic Series; Ignition Coil

    from

    $186.99
    Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

    Product Features:
    • Glass Filled Polyester Case
    • Longer Spark Duration
    • Increased Performance
    • No Energy Loss Due To Arcing
    • Includes Brass Contact Terminal
    See More

    Most Sold 1983 Chevrolet S10 Blazer Performance Exhaust Products

    Explore our best-selling Chevrolet parts for the 1983 S10 Blazer among 5 OEM and aftermarket options starting from $114.99.

    Flowmaster Inc. – 40 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.8042441)

    40 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound

    from

    $123.99
    The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
    See More

    Flowtech – Standard Header (Part No.11502FLT)

    Standard Header

    from

    $302.99


    Product Features:
    • Fuel Economy From The Engine
    • Leak Test For Max Performance
    • Mandrel-Formed Power Plenum
    • Leakproof O-Ringed Port Seals
    • Include All Mounting Hardware
    See More

    Flowmaster Inc. – 50 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Moderate Sound (Part No.842451)

    50 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Moderate Sound

    from

    $175.99
    The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
    See More

    Flowmaster Inc. – 50 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Moderate Sound (Part No.942451)

    50 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Moderate Sound

    from

    $154.99
    The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
    See More

    Dynomax – Super Turbo Direct Fit Muffler (Part No.17767)

    Super Turbo Direct Fit Muffler

    from

    $114.99
    Dynomax Super Turbo performance mufflers’ exclusive, patented, flow director design channels exhaust flow, and eliminates turbulence on most applications. The large internal flow tubes improve exhaust flow, and reduce backpressure. Each muffler uses fiberglass matting technology to absorb unwanted interior resonance, while maintaining a mellow performance tone.

    Product Features:
    • Large internal flow tubes improve exhaust flow and reduce backpressure
    • Dyno proven to flow up to 700 SCFM
    • Exclusive patented flow director channels exhaust flow and eliminates turbulence on most applications.
    • Fiberglass matting technology absorbs unwanted interior resonance but maintains a mellow tone
    • 1.75-inch to 3-inch inlet / outlet configurations
    See More

    Top-Rated Performance and Racing Products Brands For Your 1983 Chevrolet S10 Blazer

    Shop for the best-rated brands offering Performance and Racing Products and other products for your 1983 Chevrolet S10 Blazers. Below you’ll find some of our best rated Performance and Racing Products from Accel, Energy Suspension, and Mr. Gasket, and more. Performance and Racing Products from these brands that fit a 1983 S10 Blazer start at just $9.99 and are rated as high as 4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

    Popular Accel 1983 Chevrolet S10 Blazer Performance and Racing Products

    When it comes to maintaining or upgrading your 1983 Chevrolet S10 Blazer, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Accel ticks all of those boxes. We offer a wide selection of Accel Performance and Racing Products, specifically designed for the 1983 Chevrolet S10 Blazer. With over 3 Accel brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $32.88, with an average price of just $60.45. Plus, with over 54 customer reviews and an average rating of 4 stars, you can trust that our Accel Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

    Distributor Cap And Rotor Kit
    from
    $32.88
    This product is not rated

    Distributor Cap And Rotor Kit

    “”

    Supercoil
    from
    $105.99
    This product is not rated

    Supercoil

    “”

    Popular Energy Suspension 1983 Chevrolet S10 Blazer Performance and Racing Products

    Energy Suspension auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1983 Chevrolet S10 Blazer owner should feel confident when installing genuine Energy Suspension parts in their vehicle. To ensure the best fit and performance for your 1983 S10 Blazer, Advance Auto Parts carries a full inventory of 21 Energy Suspension Performance and Racing Products. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Energy Suspension Performance and Racing Products range from $9.99 to $242.99, plus, with more than 20 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

    Leaf Spring Bushing Set
    from
    $70.99
    This product is not rated

    Leaf Spring Bushing Set

    “”

    Control Arm Bushing Set
    from
    $116.99
    This product is not rated

    Control Arm Bushing Set

    “”

    Coil Spring Isolator Set
    from
    $43.99
    This product is not rated

    Coil Spring Isolator Set

    “”

    FAQs for 1983 Chevrolet S10 Blazer Performance and Racing Products

    Which Performance and Racing Products are best-sellers for 1983 Chevrolet S10 Blazers?

    Out of 74 Performance and Racing Products that fit 1983 Chevrolet S10 Blazers, the following parts are the top sellers:

    What’s the price range for 1983 Chevrolet S10 Blazer Performance and Racing Products?

    Performance and Racing Product prices for the 1983 Chevrolet S10 Blazer start at $9.99 and go up to $665.99 for the most premium parts.

    What’s the average price of a Performance and Racing Product for a 1983 Chevrolet S10 Blazer?

    The average price for Performance and Racing Products for the 1983 Chevrolet S10 Blazer is $184.29. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

    Does Advance Auto Parts sell Performance and Racing Products for other Chevrolet S10 Blazer model years?

    Yes, we currently carry Performance and Racing Products for 11 model years of Chevrolet S10 Blazers between 1984 and 1994. Performance and Racing Products are bought most frequently for the following model years: 1994, 1993, 1992, 1991, 1990, 1989, 1988, 1987, and 1986.

    What are the cheapest Performance and Racing Products for my 1983 Chevrolet S10 Blazer?

    The cheapest 1983 Chevrolet S10 Blazer Performance and Racing Products we carry in stock are:

    What are the top-rated Performance and Racing Products that fit the 1983 Chevrolet S10 Blazer?

    Out of 227 reviews by customers, our 1983 Chevrolet S10 Blazer Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1983 Chevrolet S10 Blazer and their top-rated products:

    What types of Performance and Racing Products do you sell for my 1983 Chevrolet S10 Blazer?

    Can I get help with 1983 Chevrolet S10 Blazer Performance and Racing Product orders?

    Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Performance and Racing Products and more.

    What is your return policy for Chevrolet S10 Blazer Performance and Racing Products?

    Advance Auto Parts keeps returns simple. For new Chevrolet S10 Blazer Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.