1983 Chevrolet P20 Performance Fuel Systems
More 1983 Chevrolet P20 Performance Fuel Systems
Find your specific 1983 Chevrolet P20 original or aftermarket Performance Fuel Systems below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1983 Chevrolet P20 Performance Fuel Systems
Holley – Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-80670)
from
$620.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Holley – Off Road Carbs (Part No.0-90670)
from
$724.99
The off-road truck avenger is designed specifically for off-road applications. The unique fuel metering block eliminates fuel spillover through the boosters at extreme angles allowing for 40 degree climbing, 30 degree side hill maneuvers and nose-down descents to avoid hesitations, stalling and flooding typically associated with carbs in an off road environment. The 470 CFM off-road truck avenger is the perfect carburetor for 4 cylinder, V-6, and inline 6 cylinder engines. Viton(R) is a registered trademark of DuPont Performance Elastomers.
Product Features:
See More
Product Features:
- Gold Dichromate Finish For Extreme Off Road Environments
- Single Feed Fuel Inlet For Ease Of Installation
- Optimized Off-Road Calibration That Works Out-Of-The-Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- One Piece Off-Road Vent Tube Eliminates Fuel Spillover
- Metering Block For Flood Free Op. 40 deg. Climb/30 deg. Side Hill
- Limited Lifetime Warranty Defects In Material/Workmanship
Holley – EFI Fuel Pumps (Part No.12-927)
from
$258.99
These universal in-line fuel pumps are intended for fuel Injection systems. They are designed to work in-line, not inside the tank, so installation is a snap. They’re all rated for continuous duty service and have been tested up to 2,500 hours.
Product Features:
See More
Product Features:
- Flows 43 gph At 15 PSI
- Draws 3.5 Amps At 15 PSI
- Will Feed Up To 400 Horsepower Throttle Body EFI Unit
- OE Proven Design
- Lightweight and Compact
- 3/8 in. Barbed Fittings Included
Holley – Mechanical Fuel Pump (Part No.12-327-11)
from
$144.99
Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.
Product Features:
See More
Product Features:
- High Output Fuel Flow
- Flows 110 gph Free Flow
- Shutoff Pressure Pre-Set From 6.5 To 8 PSI
- Fuel Pressure Regulator Is Not Required
- Heavy Duty Construction For Continuous High rpm Operation
- Fuel Body Casting Can Be Rotated For Plumbing Situations
- Inlet And Outlet Tapped For 3/8 in. NPT
- Inlet/Outlet Tapped For 3/8 in. NPT
Spectre – Sbc Fuel Mint Plate W/Bolts (Part No.42493)
from
$12.99
This Spectre Fuel Pump Mounting Plate for short block Chevrolet engines comes with a gasket, four bolts and four washers. It is used to mount mechanical fuel pumps. It is also triple chrome plated.
Product Features:
See More
Product Features:
- Small block Chevrolet, use for mounting mechanical fuel pumps
- Includes mounting plate gasket
- Includes chrome mounting bolts with washers
- Triple chrome plated
Holley – Mechanical Fuel Pump (Part No.12-834)
from
$124.99
Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.
Product Features:
See More
Product Features:
- Street Performance
- Flows 80 gph Free Flow
- Shutoff Pressure Pre-Set 7.5 PSI
- Fuel Pressure Regulator Is Not Required
- Heavy Duty Construction For Continuous High rpm Operation
- Fuel Body Casting Can Be Rotated For Plumbing Situations
- Inlet And Outlet Tapped For 1/4 in. NPT
- Inlet/Outlet Tapped For .25 in. NPT
Spectre – Sbc Blk Off Plate W/Bolts (Part No.42463)
from
$12.99
Spectre’s triple chrome plated Fuel Pump Block Off Plate was designed for small block Chevrolet engines. Engineered for optimum fit and function, this kit includes a block off plate gasket and chrome mounting bolts with washers.
Product Features:
See More
Product Features:
- Necessary if switching to electric fuel pump
- Includes block off plate gasket
- Includes chrome mounting bolts with washers
- Triple chrome plated
Popular 1983 Chevrolet P20 Performance Fuel Systems Categories
1983 Chevrolet P20 Performance Fuel Systems
Maybe you’re in the middle of a full rebuild of that 1983 Chevrolet P20. Maybe you just need a couple of Performance Fuel Systems. Either way, Advance Auto Parts has 5 different Performance Fuel Systems in our inventory ranging from $12.99 to $620.99. That means you can find the exact parts or products you need to keep that 1983 Chevrolet P20 running smoothly.
Performance Fuel Systems are only as good as their brand. We stock 2 different brands to make sure you have plenty of trusted parts to choose from for your 1983 Chevrolet P20. Holley and Spectre are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Performance Fuel Systems for your 1983 Chevrolet P20, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Performance Fuel Systems to keep your 1983 Chevrolet P20 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Performance Fuel Systems Brands To Make Your 1983 Chevrolet P20 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1983 Chevrolet P20 demands trusted brand parts and products to keep it running. Many trusted brands of Performance Fuel Systems make up Advance Auto Parts’ inventory, and all are ready to help make your P20 the best it can be. Be sure to browse some of our top Performance Fuel Systems brands and parts.
Popular Spectre Performance Fuel Systems
We carry Spectre parts in our stock across Performance Fuel Pumps categories, plus more. For a 1983 Chevrolet P20, our most popular Spectre Performance Fuel Systems include:
Top 1983 Chevrolet P20 Performance Fuel Systems from Holley
Holley products are another trusted brand when it comes to Performance Fuel Systems for your 1983 Chevrolet P20. Popular Holley parts include:
from
$620.99
(6)
Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny
Performance Carburetors
