1983 Chevrolet Malibu Camshafts
More 1983 Chevrolet Malibu Camshafts
Find your specific 1983 Chevrolet Malibu original or aftermarket Camshafts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1983 Chevrolet Malibu Camshafts
Sealed Power – Performance Camshaft (Part No.CS-1014R)
from
$98.99
Speed-Pro delivers the power you need and the value and quality that you deserve. Whether you are running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components
Product Features:
See More
Product Features:
- Reliable performance with significant power increase vs stock
- Good low-end torque
- Recommended for tow vehicle, street rod or muscle car
- Power range: 1000-3500rpm
- Idle: stock
- Cruise: 1600-2200rpm
Competition Cams – High Energy/Marine 212/212 Hydraulic Flat Cam for Chevrolet Small Block (Part No.12-206-2)
from
$284.99
HYDRAULIC – High Energy: Vans, pickups, 4WD and towing, in 350c.i., good idle, strong mid-range torque. OR High Energy Marine: Single or dual engine with inboard/outboard drive for ski and economy.
Product Features:
See More
Product Features:
- HYDRAULIC – High Energy: Vans, pickups, 4WD and towing, in 350c.i., good idle, strong mid-range torque. OR High Energy Marine: Single or dual engine with inboard/outboard drive for ski and economy.
- 260/260 Advertised Duration, 212/212 Duration @ .050″, .440″/.440″ Lift, 110 Lobe Separation
- Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
Cloyes Gear – Engine Camshaft Thrust Button (Part No.9-5193)
from
$14.99
Camshaft Thrust Button utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience
Product Features:
See More
Product Features:
- Fully Rollerized Operation
- Heat-Treated Steel
- Needle Roller Bearing
- Meet or exceed OEM performance requirements
Cloyes Performance – Engine Camshaft Thrust Button (Part No.9-200)
from
$27.99
All Components are Heat-Treated Steel. Needle Roller Bearing for a Fully Rollerized Operation. 0.925″ Long, Used with Old Style 3-Spoke Sheet Metal Covers.
Product Features:
See More
Product Features:
- All components are Heat-Treated Steel
- Needle Roller Bearing
- Fully Rollerized Operation.
ARP Auto Racing – Small Block/ Big Block Chevy, 5/16" – 18 Thread Size, .75" Head L, 1/2" Socket (Part No.134-1001)
from
$5.99
Install an ARP cam bolt kit and end your camshaft timing worries ARP quality delivers increased pre-load clamping force and assures positive timing gear register. Includes appropriate fasteners for your application. Increased material strength overcomes valve train harmonics and stress. Added features include oversized bolt head flange for cam button retention and reduced socket head size to facilitate easy installation and removal. Available in both High Performance and Pro Series kits.
Product Features:
See More
Product Features:
- ARP Quality Delivers Increased Pre Load Clamping Force And Assures Positive Timing Gear Register
- Quality Delivers Increased Pre-Load Clamping Force And Assures Positive Timing Gear Register
- Increased Material Strength Overcomes Valve Train Harmonics And Stress
- Oversized Bolt Head Flange For Cam Button Retention And Reduced Socket Head Size To Facilitate Easy Installation And Removal
- Set of 3
- 180,000 PSI
- .75″ Underhead Length
Dorman – Help – Camshaft Retainer Bolt (Part No.74114)
from
$7.99
This VVT sprocket bolt is designed to match the fit and function of the original part on specified vehicles for a proper repair of the variable valve timing system. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this VVT sprocket bolt matches the fit and function of the factory part on specified years, make and models.
- Ideal solution – this VVT sprocket bolt is a reliable replacement for an original part that has become stripped or broken during repair
- Durable construction – this part is made from quality materials to ensure reliable performance and a long service life
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Cloyes Performance – Engine Camshaft Bushing (Part No.P9005)
from
$24.99
Replacement Hex-A-Just Billet Steel Camshaft Dowel Eccentric Bushing; 100% USA Made; Meets or exceeds OEM performance requirements; Cloyes utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience.
Product Features:
See More
Product Features:
- Replacement Hex-A-Just Billet Steel Camshaft Dowel Eccentric Bushing
- 100% USA Made
- Meets or exceeds OEM performance requirements
- Cloyes utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience.
Dorman – Pik-a-Nut – Steel Cup Expansion Plug 2-3/32 In., SC, Height 0.278 (Part No.362566.1)
from
$2.29
This engine camshaft plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine camshaft plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Steel Cup Expansion Plug 2-3/32 In., SC, Height 0.278 (sold by each) (Part No.555-049)
from
$2.29
This engine camshaft plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine camshaft plug matches the fit and function of the factory part on specified years, makes and models.
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Steel Cup Expansion Plug 1-5/8 In., Height 0.500 (sold by each) (Part No.555-030)
from
$1.49
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Melling – Stock Replacement Engine Assembly Lubricant (Part No.M-10012G)
from
$113.99
Made In USA. Melling engine assembly lube, MELL-LUBE, is formulated to be an initial lubricant on camshaft metal surfaces as well as related valve train parts. The added zinc material (1400 ppm) provides MELL-LUBE with added protection to prevent scoring and galling during initial engine start-up for both newly rebuilt and / or remanufactured engines. In addition, MELL-LUBE contains corrosion inhibitors to prevent rust and pitting of components. MELL-LUBE mixes with any engine oil and will not clog filters. Melling recommends MELL-LUBE be a part of every camshaft install.
See More
National – Multi Purpose Seal (Part No.710799)
from
$31.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
FAG US – GENERAL SEAL (Part No.SS2784)
from
$18.49
GENERAL SEAL
National – Shaft Repair Sleeve (Part No.99146)
from
$28.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Competition Cams – CAM AND LIFTER KIT, SBC 284 XTREME ENERGY HYDRAULIC 1 EA (Part No.CL12-250-3)
from
$326.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,
Product Features:
See More
Product Features:
- Excellent performance in street carbureted applications.
- More vacuum allows an increase in duration for improved performance and assists power brakes.
- Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
Competition Cams – Xtreme Energy 248/254 Hydraulic Roller Cam K-Kit (Part No.K11-444-8)
from
$1471.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts.
Product Features:
See More
Product Features:
- Excellent performance in street carbureted applications.
- More vacuum allows an increase in duration for improved performance and assists power brakes.
- Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
Edelbrock – Performer-Plus Camshaft Kit for Chevy 200-229 90 Deg V6 (Part No.2112)
from
$306.99
Product Features:
See More
- Designed for Optimum Torque and Acceleration
- Maximum Performance From Idle through Mid-Range
- Matched to Edelbrock Performer Intakes
- Includes Hydraulic Lifters and Assembly Lube
- Major Improvement in Throttle Response and Torque
- Use For Daily Drivers/Trucks/Vans/RVs/4x4s
- Take The Guesswork Out Of Camshaft Selection
Cloyes Performance – Engine Camshaft Thrust Washer (Part No.9-203)
from
$13.99
Heat Treated Steel Bearing Race Material. Must Machine Cam Sprocket or Engiine Block .030″ to Ensure Proper Chain Alignment. Prevents Wear On Engine Block. Can be Used to Repair a Damaged Engine Block Thrust Surface.
Product Features:
See More
Product Features:
- Heat Treated Steel Bearing Race Material
- Must Machine Cam Sprocket or Engine Block .030″ to Ensure Proper Chain Alignment
- Prevents Wear On Engine Block
- Can be Used to Repair a Damaged Engine Block Thrust Surface.
Cloyes Performance – Engine Camshaft Thrust Plate (Part No.9-220B)
from
$18.99
0.150″ Thick. Bronze Thrust Washer.
Product Features:
See More
Product Features:
- 0.150″ Thick
- Bronze Thrust Washer.
Mr. Gasket – Cam Change Gaskets (Part No.4406)
from
$63.09
If you want to update just your camshaft and aren’t doing a complete engine overhaul, this kit contains all the gaskets needed to change out your camshaft. That way you don’t have to buy a complete gasket kit just to change the cam, but still can replace all the gaskets you should in the process.
Product Features:
See More
Product Features:
- Contains all the gaskets needed to change out your camshaft
- Fuel Injector O-Ring Not Included
- Meets Performance Standards
Sealed Power – Engine Camshaft Bearing Set (Part No.1466M)
from
$41.99
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Steel-backed Babbitt lining material
- Used in automotive and high-performance
- Babbitt is designed to perform under extreme loads w/o damaging other engine parts
- Babbitt is more environmentally friendly than other material
- ISO & QS certified manufacturing
Sealed Power – Engine Camshaft Bearing Set (Part No.1791M)
from
$28.99
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Steel-backed Babbitt lining material
- Used in automotive and high-performance
- Babbitt is designed to perform under extreme loads w/o damaging other engine parts
- Babbitt is more environmentally friendly than other material
- ISO & QS certified manufacturing
Sealed Power – Engine Camshaft Bearing Set (Part No.1463M)
from
$32.99
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Steel-backed Babbitt lining material
- Used in automotive and high-performance
- Babbitt is designed to perform under extreme loads w/o damaging other engine parts
- Babbitt is more environmentally friendly than other material
- ISO & QS certified manufacturing
Sealed Power – Engine Camshaft Bearing Set (Part No.1749M)
from
$40.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- A-Series bi-metal aluminum alloy
- Greater seizure resistance than tri-metal material
- Dramatically reduces or eliminates bearing wear
- Made with silicon to provide greater surface hardness
- Silicon particles help polish crankshaft journal to further reduce wear during operation
- Utilizes ISO & QS certified manufacturing
Sealed Power – Engine Camshaft Bearing Set (Part No.1404M)
from
$49.49
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Steel-backed Babbitt lining material
- Used in automotive and high-performance
- Babbitt is designed to perform under extreme loads w/o damaging other engine parts
- Babbitt is more environmentally friendly than other material
- ISO & QS certified manufacturing
Cloyes Performance – Engine Camshaft Sprocket Thrust Bearing (Part No.9-220)
from
$22.99
0.150″ Thick. Captured Needle Thrust Bearing.
Product Features:
See More
Product Features:
- 0.150″ Thick
- Captured Needle Thrust Bearing.
Sealed Power – Engine Camshaft Bearing Set (Part No.1492M)
from
$32.99
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Steel-backed Babbitt lining material
- Used in automotive and high-performance
- Babbitt is designed to perform under extreme loads w/o damaging other engine parts
- Babbitt is more environmentally friendly than other material
- ISO & QS certified manufacturing
Sealed Power – Engine Camshaft Bearing Set (Part No.1557M)
from
$36.99
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Steel-backed Babbitt lining material
- Used in automotive and high-performance
- Babbitt is designed to perform under extreme loads w/o damaging other engine parts
- Babbitt is more environmentally friendly than other material
- ISO & QS certified manufacturing
Popular 1983 Chevrolet Malibu Camshafts Categories
1983 Chevrolet Malibu Camshafts
Maybe you’re in the middle of a full rebuild of that 1983 Chevrolet Malibu. Maybe you just need a couple of Camshafts. Either way, Advance Auto Parts has 46 different Camshafts in our inventory ranging from $1.49 to $1,482.99. That means you can find the exact parts or products you need to keep that 1983 Chevrolet Malibu running smoothly.
Camshafts are only as good as their brand. We stock 10 different brands to make sure you have plenty of trusted parts to choose from for your 1983 Chevrolet Malibu. Dorman, Sealed Power, and Mr. Gasket are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Camshafts for your 1983 Chevrolet Malibu, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 14 reviews in this category, some of the top rated parts include Cam Bolt Lock Plate Kit with 5.0 stars and Engine Camshaft Bearing Set with 5.0 stars.
So if you’re in the market for aftermarket Camshafts to keep your 1983 Chevrolet Malibu rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Camshafts Brands To Make Your 1983 Chevrolet Malibu Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1983 Chevrolet Malibu demands trusted brand parts and products to keep it running. Many trusted brands of Camshafts make up Advance Auto Parts’ inventory, and all are ready to help make your Malibu the best it can be. Be sure to browse some of our top Camshafts brands and parts.
Popular Dorman – Pik-a-Nut Camshafts
We carry Dorman – Pik-a-Nut parts in our stock across Camshaft Plugs categories, plus more. For a 1983 Chevrolet Malibu, our most popular Dorman – Pik-a-Nut Camshafts include:
Top 1983 Chevrolet Malibu Camshafts from Edelbrock
Edelbrock products are another trusted brand when it comes to Camshafts for your 1983 Chevrolet Malibu. Popular Edelbrock parts include:
from
$287.99
(4)
Performer-Plus Camshaft Kit for 1957-86 Small-Block Chevrolet
Camshaft and Lifter Kits
FAQs for 1983 Chevrolet Malibu Camshafts
What are the most purchased Camshafts for the 1983 Chevrolet Malibu?
Out of 46 Camshafts for the 1983 Chevrolet Malibu, the most popular in our inventory are:
from
$1.49
This product is not rated
Steel Cup Expansion Plug 1-5/8 In., Height 0.500 (sold by each)
Camshaft Plugs
from
$2.29
This product is not rated
Steel Cup Expansion Plug 2-3/32 In., SC, Height 0.278
Camshaft Plugs
What are the top-rated 1983 Chevrolet Malibu Camshafts?
Top-rated Camshafts for your 1983 Chevrolet Malibu based on customer reviews/ratings are:
from
$32.99
(1)
Engine Camshaft Bearing Set
“Part # 1463M Direct replacement. Had to return first set because the one bearing had a nasty gouge in it. AA took it back no problems and got another ”
from
$323.99
(1)
CAM & LIFTER KIT, SBC 260H HIGH ENERGY HYD 1 KT
“I have tried several water temp sensors, and am happiest with this unit. Switches fan on at 220 degrees F, and turns fan off at about 200 degrees F. 1”
