1983 Chevrolet K5 Blazer Towing Products

Essential Towing Products for 1983 Chevrolet K5 Blazers

CARR – Cab Mount, Multi-Fit, Single, Flat Step, Polished Aluminum (Part No.124032-1)

Cab Mount, Multi-Fit, Single, Flat Step, Polished Aluminum

from

$148.99
The stylish and innovative design of these steps add to a vehicle rugged off-road look. Available in three low maintenance, extremely durable finishes to complement your vehicle appearance. Easily installed using our new multi mount system for superior strength and rigidity. Rocker panel installation provides for the strongest and easiest installation of any step products.

Product Features:
  • Exclusive New Multi Mount System
  • Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
  • Rugged Tread Pattern Provides For Safe And Attractive Non Slip Surface
  • Unique Design Gives The Vehicle A Rugged Off-Road Look, While Being A Stylish Accent For Today Vehicles
  • Strong Construction To Hold Up Under Extreme Conditions
  • Mechanical Polished Finish That Will Not Rust, Crack Or Peel And Requires Very Little Maintenance
  • Strongest And Easy Installation
See More

CARR – Cab Mount, Multi-Fit, Single, Flat Step, Powder Coated, Black, Aluminum (Part No.124031-1)

Cab Mount, Multi-Fit, Single, Flat Step, Powder Coated, Black, Aluminum

from

$148.99
The stylish and innovative design of these steps add to a vehicle rugged off-road look. Available in three low maintenance, extremely durable finishes to complement your vehicle appearance. Easily installed using our new multi mount system for superior strength and rigidity. Rocker panel installation provides for the strongest and easiest installation of any step products.

Product Features:
  • Exclusive New Multi Mount System
  • Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
  • Rugged Tread Pattern Provides For Safe And Attractive Non Slip Surface
  • Unique Design Gives The Vehicle A Rugged Off-Road Look, While Being A Stylish Accent For Today Vehicles
  • Strong Construction To Hold Up Under Extreme Conditions
  • Black Powder Coat Finish Features A Lightly Textured Matte Finish That Resists Scratching, Peeling And Fading
  • Strongest And Easy Installation
See More

CARR – Cab Mount, Multi-Fit, Set Of 2, Flat Step, Polished Aluminum, 14" L (Part No.114032)

Cab Mount, Multi-Fit, Set Of 2, Flat Step, Polished Aluminum, 14" L

from

$279.99
LD step will give the user easier access to the vehicle due to the wider and deeper stepping surface which extends further than our other steps. The LD step is available in our three durable finishes, and installation is a cinch with our mounting system.

Product Features:
  • Easier Entry And Exit From Your Vehicle
  • Wide Functional Step Area
  • Extends Further Than Our Current Steps
  • Made Of Corrosion Resistant, Durable Cast Aluminum Alloy For Extreme Longevity
  • New Aggressive And Appealing Tread Design For A Non-Slip Surface
  • Unique Design That Enhances The Looks Of Current Vehicle Body Styles
  • Resists Scratches, Peeling And Fading
  • Rocker Panel Installation Provides For The Strongest And Easiest Installation Of Any Step Products
See More

Hopkins – Vehicle Wiring Kit (Part No.41105)

Vehicle Wiring Kit

from

$27.49
Dont splice onto your vehicles factory wiring harness. Simply plug in this Hopkins® vehicle wiring kit featuring exact OEM matching connectors for a perfect weather-tight fit. This kit includes the accessories needed to get you towing faster.

Product Features:
  • Plug-In Simple® Wiring Kit
  • Utilizes OEM Connectors For Enhanced Fit And Weatherproofing
  • Includes Vehicle Side 4 Flat
  • Corrosion Resistant Terminals
  • Impact And Corrosion Resistant
  • Includes Dust Cover And Grease Packet To Prevent Corrosion
  • Includes Step-By-Step Instructions
See More

Hopkins – 41115, CHEVROLET / GMC Vehicle Specific Towing Wiring Kit (Part No.41115)

41115, CHEVROLET / GMC Vehicle Specific Towing Wiring Kit

from

$27.49
Don’t splice onto your vehicle’s factory wiring harness. Simply plug in this Hopkins® vehicle wiring kit featuring exact OEM matching connectors for a perfect weather-tight fit. This kit includes the accessories needed to get you towing faster.

Product Features:
  • Plug-In Simple!® Wiring Kit
  • Utilizes OEM connectors for enhanced fit and weatherproofing
  • Includes vehicle side 4 flat
  • Corrosion resistant terminals
  • Impact and corrosion resistant
  • Includes dust cover and grease packet to prevent corrosion
  • Includes Step-By-Step Instructions
See More

CURT – Trailer Hitch: 2" Receiver, 5,000 LB Capacity, Installs as low as 30 Mins (Part No.13401)

Trailer Hitch: 2" Receiver, 5,000 LB Capacity, Installs as low as 30 Mins

from

$269.99
Whatever your task at hand — whether it’s launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close — CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the GMC Jimmy, Chevy Blazer and Chevy K5 Blazer (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 500 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 10,000 lbs. WD and 1,000 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2″ receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

Product Features:
  • Rated to 5,000 lbs. gross trailer weight and 500 lbs. tongue weight
  • Compatible with weight distribution hitch (10,000 lbs. WD / 1,000 lbs. WDTW)
  • Engineered with a vehicle-specific design for a custom fit
  • Concealed main body for OE look and seamless integration with the vehicle
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
  • Made in USA (may include imported hardware)
See More

Milemarker – Winch Hydraulic Fittings (Part No.35-5020-15)

Winch Hydraulic Fittings

from

$124.99
For use with 75 Series and HI Series winches.

Product Features:
  • Winch Hydraulic Fittings
See More

Hopkins – 48035, 4 Flat Vehicle Side Towing Connector (48") (Part No.48035)

48035, 4 Flat Vehicle Side Towing Connector (48")

from

$7.99
Get your vehicle ready to tow the most common type of trailer on the road by installing this vehicle side 4 flat. This 4 flat connector carries the trailer’s basic lighting and includes printed wire functions that make installation quick.

Product Features:
  • 48 inch length
  • Corrosion Resistant Terminals
  • Most Commonly Used Trailer Connector
  • Found On Small Boat/Utility
  • Printed wire functions for easy wire reference
  • Printed Wire Functions For Easy Wire Reference
  • 100 Percent Tested
See More

Carquest Premium – Trailer Connector Kit (Part No.TCA1213)

Trailer Connector Kit

from

$60.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

CURT – Custom Wiring Harness (4-Way Flat Output) (Part No.55311)

Custom Wiring Harness (4-Way Flat Output)

from

$26.49
If your vehicle is not equipped with wiring for towing a trailer, CURT custom wiring is the ideal solution. A custom wiring harness — also called a T-connector — is a simple, plug-and-play electrical device that plugs into your automotive electric system and provides a standard, universal trailer wiring connection. This is done using two or more vehicle-specific, OEM-compatible connectors to plug into the taillight assembly, eliminating the need for cutting, splicing and soldering during installation. Custom wiring harnesses are made vehicle-specific, and while they are not available for all vehicles, they do offer one of the fastest, easiest and most secure ways to wire a vehicle for towing. This particular plug-in harness provides a 4-way flat connector socket and is designed to be a custom wiring harness to fit certain years of the Chevy Blazer, K5 Blazer, C10, C20, C30, K10, K20 and K30 pickup or Suburban and GMC C15, C1500, C25, C2500, C35, C3500, K15, K1500, K25, K2500, K35 and K3500 pickup or Suburban (to verify your vehicle compatibility, see application info). It comes with all necessary wiring components to establish a reliable trailer wiring connection, as well as a dust cover to keep the connector clean when not in use. You have a picture in mind of your next destination — maybe it’s the boat landing at your favorite fishing spot, maybe it’s a campsite that overlooks one of nature’s masterpieces, or maybe it’s the next big jobsite. However, turning that picture into a reality takes more than just daydreaming. It takes a solid connection and the right amount of power. CURT custom wiring is made with some of the most sophisticated technology in the industry and is designed to install with ease, giving you a long-lasting electrical connection for your towing hitch setup.

Product Features:
  • Plugs into existing OEM vehicle socket to provide a 4-way flat socket
  • Simple plug-and-play design eliminates the need for cutting or splicing
  • 4-way flat output connects tail lights, brake lights and turn signals
  • Dust cover included to keep connector clean when not in use
See More

CURT – Custom Wiring Harness (4-Way Flat Output) (Part No.55312)

Custom Wiring Harness (4-Way Flat Output)

from

$28.49
If your vehicle is not equipped with wiring for towing a trailer, CURT custom wiring is the ideal solution. A custom wiring harness — also called a T-connector — is a simple, plug-and-play electrical device that plugs into your automotive electric system and provides a standard, universal trailer wiring connection. This is done using two or more vehicle-specific, OEM-compatible connectors to plug into the taillight assembly, eliminating the need for cutting, splicing and soldering during installation. Custom wiring harnesses are made vehicle-specific, and while they are not available for all vehicles, they do offer one of the fastest, easiest and most secure ways to wire a vehicle for towing. This particular plug-in harness provides a 4-way flat connector socket and is designed to be a custom wiring harness to fit certain years of the Chevy S10, C10, C20, C30, C1500, K10, K20 and K30 pickup or Suburban and GMC S15, Syclone, C1500, C2500, C3500, K1500, K2500 and K3500 pickup or Suburban and Isuzu Hombre (to verify your vehicle compatibility, see application info). It comes with all necessary wiring components to establish a reliable trailer wiring connection, as well as a dust cover to keep the connector clean when not in use. You have a picture in mind of your next destination — maybe it’s the boat landing at your favorite fishing spot, maybe it’s a campsite that overlooks one of nature’s masterpieces, or maybe it’s the next big jobsite. However, turning that picture into a reality takes more than just daydreaming. It takes a solid connection and the right amount of power. CURT custom wiring is made with some of the most sophisticated technology in the industry and is designed to install with ease, giving you a long-lasting electrical connection for your towing hitch setup.

Product Features:
  • Plugs into vehicle tail light assembly to provide a 4-way flat socket
  • Simple plug-and-play design eliminates the need for cutting or splicing
  • 4-way flat output connects tail lights, brake lights and turn signals
  • Dust cover included to keep connector clean when not in use
See More

Carquest Premium – Trailer Connector Kit (Part No.TCA1358)

Trailer Connector Kit

from

$49.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • CarQuest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
See More

Dorman – Electrical – Trailer Wiring Accessories, Chevrolet/General Motors Trailer Plug-In (Part No.86084)

Electrical - Trailer Wiring Accessories, Chevrolet/General Motors Trailer Plug-In

from

$21.99
Convenient repair and replacement options for simple trailer wiring repairs.
See More

Dorman – Electrical – Trailer Wiring Accessories, Chevrolet/General Motors Trailer Plug-In (Part No.86083)

Electrical - Trailer Wiring Accessories, Chevrolet/General Motors Trailer Plug-In

from

$20.99
Convenient repair and replacement options for simple trailer wiring repairs.
See More

Upgrade your 1983 Chevrolet K5 Blazer with Top-Quality Towing Products

When it comes to maintaining or upgrading your 1983 Chevrolet K5 Blazer, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Towing Products are key to keeping your K5 Blazer functioning at its best. At Advance Auto Parts, we offer a wide selection of 10 Towing Products for the 1983 Chevrolet K5 Blazer, designed to meet your needs without breaking the bank. From Trailer Hitch replacements to Trailer and Towing Accessories upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Towing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Towing Products for your 1983 Chevrolet K5 Blazer at great prices. Our Towing Products inventory for this model ranges from just $7.99 to $279.99, with an average price of $110.59. Our 10 Towing Products in stock come from 6 trusted brands, so you’re sure to find the right part for your 1983 Chevrolet K5 Blazer without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1983 Chevrolet K5 Blazer, we stock popular OEM and aftermarket Towing Products from top names like Hopkins CURT, and more. Hopkins Towing Products start at just $7.99 and boast an impressive 4 stars average rating from customers. With 18 customer reviews and counting, our 1983 Chevrolet K5 Blazer Towing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Towing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1983 Chevrolet K5 Blazer is always ready to roll. We’re committed to providing you with everything you need to keep your K5 Blazer in top shape, all in one place. Start shopping confidently below for your 1983 Chevrolet K5 Blazer!

Best-Selling Trailer Hitches for 1983 Chevrolet K5 Blazers

Enhance the driving experience in your Chevrolet with 4 quality Trailer Hitch components, starting at $148.99.

CURT – Trailer Hitch: 2" Receiver, 5,000 LB Capacity, Installs as low as 30 Mins (Part No.13401)

Trailer Hitch: 2" Receiver, 5,000 LB Capacity, Installs as low as 30 Mins

from

$269.99
Whatever your task at hand — whether it’s launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close — CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the GMC Jimmy, Chevy Blazer and Chevy K5 Blazer (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 500 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 10,000 lbs. WD and 1,000 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2″ receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

Product Features:
  • Rated to 5,000 lbs. gross trailer weight and 500 lbs. tongue weight
  • Compatible with weight distribution hitch (10,000 lbs. WD / 1,000 lbs. WDTW)
  • Engineered with a vehicle-specific design for a custom fit
  • Concealed main body for OE look and seamless integration with the vehicle
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
  • Made in USA (may include imported hardware)
See More

CARR – Cab Mount, Multi-Fit, Set Of 2, Flat Step, Polished Aluminum, 14" L (Part No.114032)

Cab Mount, Multi-Fit, Set Of 2, Flat Step, Polished Aluminum, 14" L

from

$279.99
LD step will give the user easier access to the vehicle due to the wider and deeper stepping surface which extends further than our other steps. The LD step is available in our three durable finishes, and installation is a cinch with our mounting system.

Product Features:
  • Easier Entry And Exit From Your Vehicle
  • Wide Functional Step Area
  • Extends Further Than Our Current Steps
  • Made Of Corrosion Resistant, Durable Cast Aluminum Alloy For Extreme Longevity
  • New Aggressive And Appealing Tread Design For A Non-Slip Surface
  • Unique Design That Enhances The Looks Of Current Vehicle Body Styles
  • Resists Scratches, Peeling And Fading
  • Rocker Panel Installation Provides For The Strongest And Easiest Installation Of Any Step Products
See More

CARR – Cab Mount, Multi-Fit, Single, Flat Step, Powder Coated, Black, Aluminum (Part No.124031-1)

Cab Mount, Multi-Fit, Single, Flat Step, Powder Coated, Black, Aluminum

from

$148.99
The stylish and innovative design of these steps add to a vehicle rugged off-road look. Available in three low maintenance, extremely durable finishes to complement your vehicle appearance. Easily installed using our new multi mount system for superior strength and rigidity. Rocker panel installation provides for the strongest and easiest installation of any step products.

Product Features:
  • Exclusive New Multi Mount System
  • Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
  • Rugged Tread Pattern Provides For Safe And Attractive Non Slip Surface
  • Unique Design Gives The Vehicle A Rugged Off-Road Look, While Being A Stylish Accent For Today Vehicles
  • Strong Construction To Hold Up Under Extreme Conditions
  • Black Powder Coat Finish Features A Lightly Textured Matte Finish That Resists Scratching, Peeling And Fading
  • Strongest And Easy Installation
See More

CARR – Cab Mount, Multi-Fit, Single, Flat Step, Polished Aluminum (Part No.124032-1)

Cab Mount, Multi-Fit, Single, Flat Step, Polished Aluminum

from

$148.99
The stylish and innovative design of these steps add to a vehicle rugged off-road look. Available in three low maintenance, extremely durable finishes to complement your vehicle appearance. Easily installed using our new multi mount system for superior strength and rigidity. Rocker panel installation provides for the strongest and easiest installation of any step products.

Product Features:
  • Exclusive New Multi Mount System
  • Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
  • Rugged Tread Pattern Provides For Safe And Attractive Non Slip Surface
  • Unique Design Gives The Vehicle A Rugged Off-Road Look, While Being A Stylish Accent For Today Vehicles
  • Strong Construction To Hold Up Under Extreme Conditions
  • Mechanical Polished Finish That Will Not Rust, Crack Or Peel And Requires Very Little Maintenance
  • Strongest And Easy Installation
See More

Most Popular 1983 Chevrolet K5 Blazer Trailer and Towing Accessories

Customize your Chevrolet with 1 Trailer and Towing Accessories products like Towing Accessories, all priced under $20.99.

Dorman – Electrical – Trailer Wiring Accessories, Chevrolet/General Motors Trailer Plug-In (Part No.86083)

Electrical - Trailer Wiring Accessories, Chevrolet/General Motors Trailer Plug-In

from

$20.99
Convenient repair and replacement options for simple trailer wiring repairs.
See More

Top Picks for 1983 Chevrolet K5 Blazer Trailer Wiring

Upgrade Chevrolet K5 Blazers with top-quality Trailer Wiring parts, including 4 OEM and aftermarket selections for your 1983 model.

Hopkins – 48035, 4 Flat Vehicle Side Towing Connector (48") (Part No.48035)

48035, 4 Flat Vehicle Side Towing Connector (48")

from

$7.99
Get your vehicle ready to tow the most common type of trailer on the road by installing this vehicle side 4 flat. This 4 flat connector carries the trailer’s basic lighting and includes printed wire functions that make installation quick.

Product Features:
  • 48 inch length
  • Corrosion Resistant Terminals
  • Most Commonly Used Trailer Connector
  • Found On Small Boat/Utility
  • Printed wire functions for easy wire reference
  • Printed Wire Functions For Easy Wire Reference
  • 100 Percent Tested
See More

Hopkins – Vehicle Wiring Kit (Part No.41105)

Vehicle Wiring Kit

from

$27.49
Dont splice onto your vehicles factory wiring harness. Simply plug in this Hopkins® vehicle wiring kit featuring exact OEM matching connectors for a perfect weather-tight fit. This kit includes the accessories needed to get you towing faster.

Product Features:
  • Plug-In Simple® Wiring Kit
  • Utilizes OEM Connectors For Enhanced Fit And Weatherproofing
  • Includes Vehicle Side 4 Flat
  • Corrosion Resistant Terminals
  • Impact And Corrosion Resistant
  • Includes Dust Cover And Grease Packet To Prevent Corrosion
  • Includes Step-By-Step Instructions
See More

Carquest Premium – Trailer Connector Kit (Part No.TCA1358)

Trailer Connector Kit

from

$49.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • CarQuest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
See More

CURT – Custom Wiring Harness (4-Way Flat Output) (Part No.55311)

Custom Wiring Harness (4-Way Flat Output)

from

$26.49
If your vehicle is not equipped with wiring for towing a trailer, CURT custom wiring is the ideal solution. A custom wiring harness — also called a T-connector — is a simple, plug-and-play electrical device that plugs into your automotive electric system and provides a standard, universal trailer wiring connection. This is done using two or more vehicle-specific, OEM-compatible connectors to plug into the taillight assembly, eliminating the need for cutting, splicing and soldering during installation. Custom wiring harnesses are made vehicle-specific, and while they are not available for all vehicles, they do offer one of the fastest, easiest and most secure ways to wire a vehicle for towing. This particular plug-in harness provides a 4-way flat connector socket and is designed to be a custom wiring harness to fit certain years of the Chevy Blazer, K5 Blazer, C10, C20, C30, K10, K20 and K30 pickup or Suburban and GMC C15, C1500, C25, C2500, C35, C3500, K15, K1500, K25, K2500, K35 and K3500 pickup or Suburban (to verify your vehicle compatibility, see application info). It comes with all necessary wiring components to establish a reliable trailer wiring connection, as well as a dust cover to keep the connector clean when not in use. You have a picture in mind of your next destination — maybe it’s the boat landing at your favorite fishing spot, maybe it’s a campsite that overlooks one of nature’s masterpieces, or maybe it’s the next big jobsite. However, turning that picture into a reality takes more than just daydreaming. It takes a solid connection and the right amount of power. CURT custom wiring is made with some of the most sophisticated technology in the industry and is designed to install with ease, giving you a long-lasting electrical connection for your towing hitch setup.

Product Features:
  • Plugs into existing OEM vehicle socket to provide a 4-way flat socket
  • Simple plug-and-play design eliminates the need for cutting or splicing
  • 4-way flat output connects tail lights, brake lights and turn signals
  • Dust cover included to keep connector clean when not in use
See More

In-Demand Winches for 1983 Chevrolet K5 Blazers

Select from 1 premium Winches parts for your 1983 Chevrolet K5 Blazer.

Milemarker – Winch Hydraulic Fittings (Part No.35-5020-15)

Winch Hydraulic Fittings

from

$124.99
For use with 75 Series and HI Series winches.

Product Features:
  • Winch Hydraulic Fittings
See More

Top-Rated Towing Products Brands For Your 1983 Chevrolet K5 Blazer

Shop for the best-rated brands offering Towing Products and other products for your 1983 Chevrolet K5 Blazers. Below you’ll find some of our best rated Towing Products from Hopkins and CURT, and more. Towing Products from these brands that fit a 1983 K5 Blazer start at just $7.99 and are rated as high as 4 stars. OEM and aftermarket Towing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular Hopkins 1983 Chevrolet K5 Blazer Towing Products

When it comes to maintaining or upgrading your 1983 Chevrolet K5 Blazer, using quality Towing Products is essential to ensure durability and a perfect fit. Hopkins ticks all of those boxes. We offer a wide selection of Hopkins Towing Products, specifically designed for the 1983 Chevrolet K5 Blazer. With over 2 Hopkins brand Towing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $7.99, with an average price of just $17.74. Plus, with over 5 customer reviews and an average rating of 4 stars, you can trust that our Hopkins Towing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

48035, 4 Flat Vehicle Side Towing Connector (48")
from
$7.99

(5)

48035, 4 Flat Vehicle Side Towing Connector (48")

“Great fit”

Vehicle Wiring Kit
from
$27.49
This product is not rated

Vehicle Wiring Kit

“”

Popular CURT 1983 Chevrolet K5 Blazer Towing Products

CURT auto parts is one of the highest quality Towing Product brands in the market. Any 1983 Chevrolet K5 Blazer owner should feel confident when installing genuine CURT parts in their vehicle. To ensure the best fit and performance for your 1983 K5 Blazer, Advance Auto Parts carries a full inventory of 2 CURT Towing Products. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these CURT Towing Products range from $26.49 to $269.99, plus, with more than 1 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Towing Products below will deliver on both quality and value.

Trailer Hitch: 2" Receiver, 5,000 LB Capacity, Installs as low as 30 Mins
from
$269.99

(1)

Trailer Hitch: 2" Receiver, 5,000 LB Capacity, Installs as low as 30 Mins

“hitch is good quality, just wish it fit tighter to bunper.”

Custom Wiring Harness (4-Way Flat Output)
from
$26.49
This product is not rated

Custom Wiring Harness (4-Way Flat Output)

“”

FAQs for 1983 Chevrolet K5 Blazer Towing Products

Which Towing Products are best-sellers for 1983 Chevrolet K5 Blazers?

Out of 10 Towing Products that fit 1983 Chevrolet K5 Blazers, the following parts are the top sellers:

What’s the price range for 1983 Chevrolet K5 Blazer Towing Products?

Towing Product prices for the 1983 Chevrolet K5 Blazer start at $7.99 and go up to $279.99 for the most premium parts.

What’s the average price of a Towing Product for a 1983 Chevrolet K5 Blazer?

The average price for Towing Products for the 1983 Chevrolet K5 Blazer is $110.59. Keep in mind the variety of part types within our Towing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Towing Products for other Chevrolet K5 Blazer model years?

Yes, we currently carry Towing Products for 11 model years of Chevrolet K5 Blazers between 1975 and 1986. Towing Products are bought most frequently for the following model years: 1986, 1985, 1984, 1982, 1981, 1980, 1979, 1978, and 1977.

What are the cheapest Towing Products for my 1983 Chevrolet K5 Blazer?

The cheapest 1983 Chevrolet K5 Blazer Towing Products we carry in stock are:

What are the top-rated Towing Products that fit the 1983 Chevrolet K5 Blazer?

Out of 18 reviews by customers, our 1983 Chevrolet K5 Blazer Towing Products have an average customer rating of . These are some of the highest-rated Towing Product types for the 1983 Chevrolet K5 Blazer and their top-rated products:

What types of Towing Products do you sell for my 1983 Chevrolet K5 Blazer?

Can I get help with 1983 Chevrolet K5 Blazer Towing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Towing Products and more.

What is your return policy for Chevrolet K5 Blazer Towing Products?

Advance Auto Parts keeps returns simple. For new Chevrolet K5 Blazer Towing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.