from

$129.99

New Platinum Pro Front Fuel Tank Bracket, With Strap, Made Of Steel

Product Features:

With Strap
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$24.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$102.99

CARDONE Diesel Fuel Injector Kits conveniently contain all components needed to complete the entire job, while other suppliers sell each component individually. Each kit includes everything required for installation, ensuring leak free operation and reduced crank times due to fuel leaks. Each kit contains 100% new components, ensuring trouble-free installation, keeping both you and your vehicle on the road for many years to come.

Product Features:

All in one kit makes the installation job easier and faster, as these components are typically sold separately from O.E.M. suppliers
Each installation kit includes everything required (gaskets, O-rings, sealing washers, etc.) for proper installation
Guaranteed fit and function
Meets or exceeds O.E.M. performance

from

$211.99

All Edelbrock fuel rails are machined from high quality extruded aluminum. Each kit includes fuel rails, stands and mounting hardware. Fuel fittings, crossover line and regulator not included. 3627 Small-Block Chevy fuel rail kit is for use with Pro-Flo X

Product Features:

Black AnodizedFinish
High Capacity Fuel Rails
For Use W/ Pro-Flo XT Manifold #7137
-6 AN Inlet / Outlet
Made In The USA

from

$177.99

GM Genuine Parts Secondary Air Injection Check Valves are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These valves help prevent exhaust gases from flowing back through the air injection system. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps prevent exhaust from entering air pump
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$40.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
All pumps are functionally tested for correct operation which improves pump reliability
Exact fit original equipment replacements means easy installation
Consistent pressure at all operating temperatures results in quick start-ups.
Pump is designed for diesel engines and applications
Always check fuel filter when replacing the fuel pump

from

$664.99

CARQUEST premium remanufactured fuel injection pumps are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each pump is 100% tested on a sophisticated flow bench under multiple operating parameters to meet or exceed OE specifications.

Product Features:

Each unit is 100% tested to OE specifications
Includes pump mounting o-ring

from

$193.99

This replacement fuel tank is precision-engineered to match the fit and function of the original fuel tank on specified vehicles.

Product Features:

Reliable replacement – this fuel tank directly replaces the original fuel tank on specified vehicle years, makes and models
Durable construction – this fuel tank is made from the same rugged materials as the original part for dependable service
Quality assured – this part has been validated to ensure a quality fit and long service life
Trustworthy design – backed by team of product specialists in the United States

from

$73.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$31.99

Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation advancements. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance. Bosch oxygen sensors deliver exceptional OE level reliability, performance and durability, further improving service life of the product.

Product Features:

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Direct Fit includes OE Connector for easy installation
Performance meets or exceeds OE specifications
True Direct-fit OE connectors and harness

from

$12.49

To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye

Product Features:

Helps avoid premature fuel pump failure
Lint free towel included
Low suds formulation
Removes harmful contaminants from the fuel tank

from

$8.49

The A.I.R. Check Valve is an emission control device that allows air into the exhaust system to help burn pollutants. Our A.I.R Check Valve is made to withstand the heat of the exhaust manifold.

Product Features:

Emissions, A.I.R Check Valves – 1994-64 AMC, GM, Chrysler, Fiat, Isuzu, Jaguar, Jeep, MG, Nissan,VW
Air Check Valve
The A.I.R. Check Valve is an emission control device that allows air into the exhaust system to help burn pollutants. Our A.I.R Check Valve is made to withstand the heat of the exhaust manifold.
Include gaskets and mounting hardware for a complete repair
Direct replacement for a proper fit every time

from

$155.99

Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.

Product Features:

High Output Fuel Flow
Flows 110 gph Free Flow
Shutoff Pressure Pre-Set From 6.5 To 8 PSI
Fuel Pressure Regulator Is Not Required
Heavy Duty Construction For Continuous High rpm Operation
Fuel Body Casting Can Be Rotated For Plumbing Situations
Inlet And Outlet Tapped For 3/8 in. NPT

from

$33.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank straps meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our expertise
Direct fit ensures safe, secure fuel tank installation
Product individually packaged and labeled to help reduce product damage prior to installation
Industry leading coverage on straps for plastic tanks

from

$57.99

CARDONE Fuel Injection Pump Installation Kits provide the option of not replacing the entire oil rail, providing an easy fix and saving you hundreds of dollars. Paired with CARDONE’s premium Oil Rail Removal Tool (2K-205T), this repair kit allows technicians and vehicle owners to repair expensive high-pressure oil issues in a fraction of the time.

Product Features:

All in one kit makes the installation job easier and faster, as these components are typically sold separately from O.E.M. suppliers
Each installation kit includes everything required (gaskets, O-rings, sealing washers, etc.) for proper installation
Guaranteed fit and function
Meets or exceeds O.E.M. performance

from

$59.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel sending units meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
Precision tested fuel level sensors ensures vehicles fuel gage will provide an accurate reading at any fuel level
Includes strainers for smoother installation process and ensures a clean fuel system upon replacement
Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
Manufactured with high quality material, ensuring the durability of this part to prevent costly repairs

from

$12.99

Spectre’s triple chrome plated Fuel Pump Block Off Plate was designed for small block Chevrolet engines. Engineered for optimum fit and function, this kit includes a block off plate gasket and chrome mounting bolts with washers.

Product Features:

Necessary if switching to electric fuel pump
Includes block off plate gasket
Includes chrome mounting bolts with washers
Triple chrome plated

from

$21.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$17.29

Recommended for replacement whenever the sending unit is serviced, this fuel tank sending unit lock ring securely retains the fuel pump assembly to the lock. Made of durable materials for reliable service.

Product Features:

Direct replacement – this fuel tank sending unit lock ring is made to match the fit and performance of the original ring on specific vehicle applications
Recommended for replacement whenever the sending unit is serviced, this fuel tank sending unit lock ring securely retains the fuel pump assembly to the lock
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$73.99

Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

NTK’s Manifold Absolute Pressure Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper manifold pressure, fuel metering and ignition timing.
The Manifold Absolute Pressure Sensor (MAP) provides manifold pressure information to the Engine Control Unit (ECU). The data is used to determine the air mass flow rate and required fuel for optimum combustion and ignition timing.

from

$84.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$48.99

Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain gears offer reliability and dependability for engine rebuilds and typical replacement jobs
Helical tooth form for quiet operation and precision machined bore for true fit
CAD designed and manufactured using premium materials to ensure optimal performance
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$83.99

Product Features:

EGR Adapter
Clears OEM Intake
Includes Gaskets and Bolts

from

$6.29

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$161.99

CARDONE Remanufactured Fuel Injectors provide an alternative plug and play solution to fuel delivery for diesel applications. All units are flow tested and balanced and replaced with new O-rings and gaskets. Each unit retains OEM duty cycle and pulse width ensuring reliable performance. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.

Product Features:

All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
All components are renewed or replaced as necessary to ensure high quality and durability
When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
Guaranteed fit and function
Meets or exceeds O.E.M. performance

from

$19.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$16.16

Recommended for replacement whenever the sending unit is serviced, Dorman’s Fuel Tank Sending Unit Lock Ring securely retains the fuel pump assembly to the lock. Its heavy-duty steel or plastic construction ensures a long life.

Product Features: