from

$6.99

you have probably heard many a horror story about someone losing an engine when the oil pump fell off into the pan because of a broken bolt. Well, you can put your mind at ease when using ARP premium grade oil pump bolt and stud kits. You have a choice of black oxide finished 8740 chrome moly steel or low maintenance stainless steel. Both are nominally rated at 170,000 PSI tensile strength to provide you with plenty of clamping force. Moreover, take your pick between conventional hex style or 12 point designs. This is insurance that no conscientious engine builder should be without The studs come with flat washers and nuts, while the Ford bolt kit has flat washers only. These inexpensive fasteners can literally save your engine.

Product Features:

Nominally Rated At 170,000 Psi Tensile Strength To Provide You With Plenty Of Clamping Force
Premium Grade Oil Pump Stud
The Studs Come With Flat Washers And Nuts
Black Oxide Finished 8740

from

$37.49

The engineers at ARP spent quite a bit of time developing these highly effective, unique oil pan studs. They are designed to make it as easy as possible to install a pan and seal it properly. You will note that the studs have a radiused bullet nose that serves to locate the pan rails, then allow the nuts to be easily installed without the worry of cross threading. For those who prefer bolts, ARP got you covered, too. Both are available in black oxide finished chrome moly steel or rust proof stainless steel. Also, you may choose between conventional hex style or the space saving 12 point nuts. The stud kits come complete with a special locking flanged nut, while the bolt kits come with washers.

Product Features:

Designed To Make It As Easy As Possible To Install A Pan And Seal It Properly
Bolt Kits Come With Washers
Stud Kits Come Complete With A Special Locking
Easily Installed Without The Worry Of Cross-Threading

from

$63.09

If you want to update just your camshaft and aren’t doing a complete engine overhaul, this kit contains all the gaskets needed to change out your camshaft. That way you don’t have to buy a complete gasket kit just to change the cam, but still can replace all the gaskets you should in the process.

Product Features:

Contains all the gaskets needed to change out your camshaft
Fuel Injector O-Ring Not Included
Meets Performance Standards

from

$15.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$3.78

Timing Cover Gasket

from

$4.99

This engine cylinder head plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine cylinder head plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$44.99

A new Melling high performance pick-up tube/oil screen assembly provides the lubrication oil as well as protection for your oil pump from materials that find their way into the engine oil supply system. Contaminates enter your oil system via engine wear, extended time between oil changes and other internal engine sources. These contaminates can interfere with the proper oil flow and pressure spring functions resulting in engine damage and/or failure. Melling suggests that a new properly installed high performance oil pump pick-up tube/screen be a part of every oil pump installation when a higher quality oil pump screen is required. Melling high performance oil pump pick-up tubes/screens are manufactured with stronger welds and in some cases designed with additional reinforced mountings, include mounting bolts and are supplied with protective coatings.

Product Features:

Manufactured from high quality durable materials for long wear
Precision engineered for maximum fit and function
Designed for long-life and worry-free performance
Includes additional support mounting bracket for high performance applications
Phosphate coated for rust protection
Includes screen mounting gasket and hex head wrench
Exceeds original equipment specifications

from

$42.49

Melling offers a replacement oil pump drive gear for several Jeep and GM applications. This gear should be replaced should the original gear show ware or be damaged or lost during the rebuilding process.

Product Features:

Manufactured from high quality materials for consistent durable wear
Precision engineered for optimum fit and function
Designed for long-life and worry-free performance
Meets or exceeds original equipment specifications

from

$5.99

This engine mount bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine mount bolt matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$7.19

Installs using stock timing cover bolts. Chrome plated steel is a much better compliment to a chromed timing cover. Has markings from 14 degrees before top dead center (BTDC) to 8 degrees after top dead center (ATDC).

Product Features:

Bolts on with existing timing cover bolts
Chrome plated steel is a much better compliment for chrome timing covers
Markings for 14 degrees BTDC to 8 degrees ATDC

from

$18.99

Product Features:

Valve Seats
Performer Series
50-State Street Legal

from

$6.99

Our Engine Intake Manifold Expansion Plug is conveniently designed as a direct replacement for stripped plugs. A proper fit is ensured, every time.

Product Features:

Manufactured from high quality materials for a long service life
Torque values listed on parts (where applicable)
Easy to install
Constructed to strict engineering quality standards

from

$15.49

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
Application specific
SUV and rear air applications

from

$59.99

If you have ever installed a rocker stud into a cylinder head and watched it wobble as it screwed in, you knew from the beginning that the rocker geometry was going to be inconsistent all over the place. ARP rocker studs are concentric within 0.005 T.I.R. thread pitch to thread pitch. They run in straight and true. Lengths are exact designed to provide positive seating every time. An extra large radius base offers greater resistance to flex. Available in both High Performance and Pro Series models. To be used with ARP patented Perma Loc(TM) adjusters.

Product Features:

Made Of 8740 Chrome Moly Forgings
Heat Treated To 180,000 PSI
Excellent For Elapsed Time Bracket Racing, Limited Rule Oval Track Competition And Street Use
Lengths Are Exact Designed To Provide Positive Seating Every Time
Set of 16
.800″ Adjuster Thread Length
3/8-24 Shank Diameter and Thread
3/8″ Typical Small Block Application

from

$119.99

All Pro Series bolts are cold forged to ensure molecular integrity, heat treated prior to thread rolling and machining, and are rated at 200,000 PSI tensile strength. ARP Pro Series head bolt kits are application specific, designed for use with typically competition only components. These fasteners deliver superior strength and meet the ARP zero defect zero failure quality standard. Hardened and parallel ground washers are included with each kit to ensure even load distribution and accurate torque readings. All Pro Series head bolts have a reduced wrenching hex or 12 point head and wide area flange to eliminate the need for valve train removal for cylinder head retorquing and permits the use of larger diameter valve springs. Most applications have undercut short bolts that can help eliminate head gasket failures through providing more stretch to compensate for the additional compression of gaskets.

Product Features:

Pro Series Bolts Are Cold Forged To Ensure Molecular Integrity, Heat Treated Prior To Thread Rolling And Machining
Nominally Rated At 200,000 PSI Tensile Strength
These Fasteners Deliver Superior Strength And Meet The ARP Zero Defect Zero Failure Quality Standard
Bolts Have A Reduced Wrenching Hex Or 12 Point Head And Wide Area Flange To Eliminate The Need For Valve Train Removal For Cylinder Head Retorquing And Permits The Use Of Larger Diameter Valve Springs

from

$72.99

This direct replacement harmonic balancer features a stress-resistant rubber bond to properly absorb engine vibration. Stringent standards help ensure excellent tensile and impact strength for greater durability.

Product Features:

Ideal replacement – this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement
Durable construction – stringent specifications and careful construction help ensure longevity
Thoroughly tested – this harmonic balancer has undergone dimensional verification, material validation and functional testing
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$37.99

Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain gears offer reliability and dependability for engine rebuilds and typical replacement jobs
Helical tooth form for quiet operation and precision machined bore for true fit
CAD designed and manufactured using premium materials to ensure optimal performance
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$24.99

Replacement Hex-A-Just Billet Steel Camshaft Dowel Eccentric Bushing; 100% USA Made; Meets or exceeds OEM performance requirements; Cloyes utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience.

Product Features:

Replacement Hex-A-Just Billet Steel Camshaft Dowel Eccentric Bushing
100% USA Made
Meets or exceeds OEM performance requirements
Cloyes utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience.

from

$167.99

Product Features:

Size: 3/4 in. x 10 in. x 12-1/4 in.
Medium duty applications
All except Chevrolet V8 applications
Two-pass design for increased cooling

from

$151.99

Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks are black oxide coated. Non-rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:

Complete Kit: Includes Retainers And Locks
Springs Made of Highest Quality Spring Wire
Springs Precision Wound To Close Tolerances
Includes Superior Quality Steel Retainers
Includes 7 deg. Heat-Treated Valve Stem Locks
Retainers and Locks Black Oxide Coated
Non-Rotator Style: Dyno Tested and Street Proven
Great Match to Edelbrock Camshaft Kit

from

$95.99

Valve spring retainers for use OE cast iron heads. Superior quality heat-treated steel. Machined for strength with black oxide finish. Finish ensures rust and corrosion protection.

Product Features:

Valve Spring Retainers for Use OE Cast Iron Heads
Superior Quality Heat-Treated Steel
Machined for Strength with Black Oxide Finish
Finish Ensures Rust and Corrosion Protection

from

$15.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE — Available for domestic and foreign nameplate vehicles

from

$128.99

Product Features:

Provides excellent sealing and conformability
Releases+N747 clean without sticking, if the engine needs to be disassembled
Perfect companion for Edelbrock cylinder heads and intake manifolds
Does not include end seals
Use of a silicone sealant in place of end seal is recommended

from

$72.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$123.99

Includes: 2 short chrome valve covers 2 valve cover gaskets 1 chrome push-on breather 1 chrome dipstick & tube 1 chrome timing chain cover 1 chrome timing tab 1 rubber grommet for valve cover PCV hole 1 breather grommet.

Product Features:

Chrome Plated Steel
Comes W/valve Cover Gaskets

from

$133.99

Premium High Performance 3/8″ Pitch Double Roller Replacement TRUE Roller “Z” Chain. 0.250″ Roller Diameter. Approximately 33% Overall Increased Strength Over the Standard High Performance Chain. Featuring a Press Fit Center Link design that Increases Load Distribution. Heat Treated and Processed Links to Maximize Ultimate Breaking Strength while Remaining Ductile for Toughness. Pre-stressed to Increase Fatigue Life.

Product Features:

A timing chain synchronizes the rotation of the crankshaft and camshaft(s), ensuring proper timing of the engines valve events for each cylinder
Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
From stock replacement to high performance, Cloyes has the most complete timing chain catalog
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes recommends the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced as these components play a vital role in system stability and accurate timing
Refer to our online catalog for detailed application-specific information
Keep your engines valvetrain in perfect time with Cloyes, the world leader in timing drive systems

from

$7.49

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Complete rocker arm assembly
1 Arm
1 Ball
1 Nut
Utilizes ISO & QS certified manufacturing

from

$12.99

These Mr. Gasket cam bolt kits feature specially hardened bolts to keep the cam button secure so the cam won’t walk out of place. Can also be used as original equipment replacement. Includes three 5/16 inch-18 x 3/4 inch Long Grade 5 Bolts with Black Oxide Finish.

Product Features: