1983 Buick Regal Body Parts
Find Your Specific 1983 Buick Regal Body Parts
Below you will find various in-demand Buick Body Parts, components and accessories for your 1983 Regal. Advance Auto Parts has popular Regal parts like Vehicle Hoods, Vehicle Latches and Handles, Bodies and Fender Parts and more. You’ll also find aftermarket and OEM Body Parts for other Regal model years including
2003,
2004,
2011,
2012,
2013,
2014,
2015,
2016,
2017 and more. Select a category of 1983 Buick Regal Body Parts below and start saving instantly.
Popular 1983 Buick Regal Body Parts Categories
Essential Body Parts for 1983 Buick Regals
Dorman – Windshield Garnish Clip – Exterior (Part No.963-211)
from
$4.99
Dorman offers a comprehensive line of Clip / Spring Nuts for a range of automotive applications. They are available for use with a large variety of screw sizes, throat depths, and panel ranges.
Product Features:
See More
Product Features:
- Constructed of high-quality materials for long-lasting durability.
- Many different styles are available, including threaded and wide panel
- Packaged in a variety of piece counts for use with both small and large projects
- Also suitable for a broad range of industrial and commercial uses
Carquest Premium – Trunk Lock (Part No.TLC1052)
from
$13.49
All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Energy Suspension – Body Mount Set (Part No.3.4141G)
from
$232.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
Product Features:
See More
Product Features:
- Replace to Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
KAI – Door Lock Striker (Part No.GMK404760671)
from
$23.99
New Goodmark Door Lock Striker, Allen Head Bolt With Collar
Product Features:
See More
Product Features:
- Allen Head Bolt With Collar
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Dorman – Help – Window Rollers (Part No.74430)
from
$9.49
This window regulator roller is designed to match the fit and function of the original roller on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this window regulator roller is designed to match the fit and function of the original part on specified vehicles.
- Restores functionality – reliable replacement for a roller that has failed due to wear
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
KAI – Deck Lid Seal (Part No.GMK403570378)
from
$89.99
New Goodmark Trunk Weatherstrip
Product Features:
See More
Product Features:
- Made Of Rubber
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Metro Mould – T-Top Panel Seal (Part No.TP 5020)
from
$670.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro T-Top Seals all have that show winning look and fit. Our T-Top Seals have a perfect fit. T-Top to Body Seals. Fits models with factory T-top option. Replaces OEM #20211820/20211821. For matching T-Top Side Rail Seals, see ELP 5020. Pair.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
StrongArm – Trunk Lift Support: 9.82" Ext Length, 3.46" Travel, 191 Lbs of Force, 1 Pk (Part No.F4002)
from
$16.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.
Product Features:
See More
Product Features:
- Heavy Gauge Steel Body
- Self-Cleaning Piston Assembly
- Rubber O-Ring Piston Seal
Carquest Premium – Door Lock Kit (Part No.DLC1051)
from
$20.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Door Window Switch (Part No.WSC1365)
from
$34.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Metro Mould – Door Seal (Part No.LM 16-JE)
from
$270.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Molded Door Seals. Pair. R&L.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Dorman – Help – Door Hinge Pin And Bushing Kit – 1 Pins And 4 Bushings (Part No.38400)
from
$8.49
This door hinge pin & bushing kit is designed to match the original parts required to restore door alignment and function on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this door hinge pin & bushing kit is designed to match the original pin and bushing required to restore the alignment and proper function of a door on specified vehicles
- Ideal solution – this pin and bushing are reliable replacements for original components that have failed due to wear
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
KAI – Console Bracket (Part No.GMK4562507813S)
from
$69.99
New Goodmark Center Console Conversion Bracket
Product Features:
See More
Product Features:
- Made Of Metal
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Dorman – Drive Type Rivet-GM-Hole Size-8.25mm-Diameter 20mm (Part No.963-210)
from
$9.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – Hood Latch Assembly (Part No.315-100)
from
$81.99
Hood no longer opening or closing properly? This replacement hood latch assembly matches the fit and function of the original equipment hood latch and is made of corrosion-resistant materials for reliable service.
Product Features:
See More
Product Features:
- Direct replacement – this hood latch assembly matches the fit and function of the original equipment latch.
- Durable construction – corrosion-resistant housing enhances this latch’s durability and prevents functional deterioration.
- Easy installation – requires no special tools to replace
- Quality tested – this part has undergone vehicle fitment and material testing to ensure proper fit and reliable service
KAI – Hood Insulation Clip (Part No.GMKHWB2401)
from
$10.99
New Goodmark Box Of 25 Hood Pad Clips, Replaces Gm 3977775, 2 Inch Diameter
Product Features:
See More
Product Features:
- 2 Inch Diameter
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Rocker Panel (Part No.GMK403546078L)
from
$109.99
New Goodmark Rocker Panel, Inner, Driver Side
Product Features:
See More
Product Features:
- Inner Driver Side
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
GM Genuine Parts – Driver Side Door Lock Actuator with Dome Lamp and Door Ajar Switch (Part No.25664288)
from
$128.99
GM Genuine Parts Door Lock Actuator Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These kits come with the components to replace your door lock actuator. The door lock actuator is an electrically operated linear motor that operates the door lock mechanism within the vehicle doors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
KAI – Door Hinge (Part No.GMK4035401781R)
from
$75.99
New Goodmark Passenger Side Front Upper Door Hinge
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Wheel Arch Panel (Part No.GMK446265081L)
from
$99.99
New Goodmark Driver Side Upper Wheel Arch Repair Panel
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Dorman – Help – Door Lock Rod Clips (Part No.75455)
from
$7.99
This door lock rod clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this door lock rod clip matches the fit and function of the factory part on specified years, makes and models.
- Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
KAI – Floor Pan (Part No.GMK403551078R)
from
$143.99
New Goodmark Rear Passenger Floor Section
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Needa Parts – Panel Trim Retainer – Interior – GM/Chrysler (Part No.45478)
from
$2.49
Needa Parts, a division of the Hillman Group, is an industry leader in all types of automotive body fasteners, retainers, and clips, offering over 400 SKUs of interior, exterior, and underhood fasteners.
Product Features:
See More
Product Features:
- Needa Parts offers a complete assortment for all popular makes and models
- Vehicle make specific fastener kits are available
- All fasteners meet or exceed OEM standards
Metro Mould – Cowl Seal (Part No.CS 13-G)
from
$41.49
Cowl Seal
KAI – Trunk Floor (Part No.GMK4035725781LS)
from
$143.99
New Goodmark Driver Side Trunk Floor Pan With Body Mount Brace
Product Features:
See More
Product Features:
- Made Of Metal
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Metro Mould – Window Sweeper Kit (Part No.WC 1800-20)
from
$369.99
Window Sweeper Kit
Dorman – Help – Door Hinge Bushing Assortment – 4 Sizes (Part No.38374)
from
$7.99
This door hinge bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this door hinge bushing matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
KAI – Floor Plug (Part No.GMK4035512781)
from
$7.99
New Goodmark Trunk Floor Drain Plug
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Upgrade your 1983 Buick Regal with Top-Quality Body Parts
When it comes to maintaining or upgrading your 1983 Buick Regal, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Buick or enhancing its overall performance, Body Parts are key to keeping your Regal functioning at its best. At Advance Auto Parts, we offer a wide selection of 95 Body Parts for the 1983 Buick Regal, designed to meet your needs without breaking the bank.
From
Vehicle Hood
replacements to
Vehicle Latches and Handles
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Body Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Body Parts for your 1983 Buick Regal at great prices.
Our Body Parts inventory for this model
ranges from just $1.79 to $670.99, with
an average price of $78.02.
Our 95 Body Parts in stock come from 14 trusted brands, so you’re sure to find the right part for your 1983 Buick Regal without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1983 Buick Regal, we stock popular OEM and aftermarket Body Parts from top names
like StrongArm, Dorman, Carquest, and more.
StrongArm Body Parts
start at just $16.99 and boast an impressive 5 stars average rating from customers.
Dorman and Carquest also bring quality to the table, with Body Parts available starting at $3.99, and at an average 4 stars rating.
With 861 customer reviews and counting, our 1983 Buick Regal Body Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Body Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1983 Buick Regal is always ready to roll. We’re committed to providing you with everything you need to keep your Regal in top shape, all in one place.
Start shopping confidently below for your 1983 Buick Regal!
Best-Selling Vehicle Hoods for 1983 Buick Regals
Enhance the driving experience in your Buick with 8 quality Vehicle Hood components, starting at $10.99.
StrongArm – Back Glass Lift Support: 18.0" Ext Length, 6.61" Travel, 38 Lbs of Force, 1 Pk (Part No.D4404)
from
$19.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.
Product Features:
See More
Product Features:
- Heavy Gauge Steel Body
- Self-Cleaning Piston Assembly
- Rubber O-Ring Piston Seal
StrongArm – Hood Lift Support: 15.33" Ext Length, 5.57" Travel, 130 Lbs of Force, 1 Pk (Part No.E4428)
from
$21.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.
Product Features:
See More
Product Features:
- Heavy Gauge Steel Body
- Self-Cleaning Piston Assembly
- Rubber O-Ring Piston Seal
StrongArm – Trunk Lift Support: 9.82" Ext Length, 3.46" Travel, 191 Lbs of Force, 1 Pk (Part No.F4002)
from
$16.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.
Product Features:
See More
Product Features:
- Heavy Gauge Steel Body
- Self-Cleaning Piston Assembly
- Rubber O-Ring Piston Seal
StrongArm – Hood Lift Support: 15.35" Ext Length, 5.62" Travel, 96 Lbs of Force, 1 Pk (Part No.E4491)
from
$18.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.
Product Features:
See More
Product Features:
- Heavy Gauge Steel Body
- Self-Cleaning Piston Assembly
- Rubber O-Ring Piston Seal
Atlas Lift – Lift Support (Part No.LS10155)
from
$22.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!
Product Features:
See More
Product Features:
- Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
- Easy Install – Less than 15 Minutes! based on average install time across all parts
- No Special Tools Required
- Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
- OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
- OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
- World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
- Trilingual Install Instructions provided inside each package
Metro Mould – Cowl Seal (Part No.CS 13-G)
from
$41.49
Cowl Seal
Atlas Lift – Lift Support (Part No.LS10000)
from
$27.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!
Product Features:
See More
Product Features:
- Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
- Easy Install – Less than 15 Minutes! based on average install time across all parts
- No Special Tools Required
- Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
- OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
- OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
- World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
- Trilingual Install Instructions provided inside each package
KAI – Hood Insulation Clip (Part No.GMKHWB2401)
from
$10.99
New Goodmark Box Of 25 Hood Pad Clips, Replaces Gm 3977775, 2 Inch Diameter
Product Features:
See More
Product Features:
- 2 Inch Diameter
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Most Popular 1983 Buick Regal Vehicle Latches and Handles
Customize your Buick with 9 Vehicle Latches and Handles products
like Exterior Door Handles,
Interior Door Handles, and
Window Handles, all
priced under $81.99.
Dorman – Hood Latch Assembly (Part No.315-100)
from
$81.99
Hood no longer opening or closing properly? This replacement hood latch assembly matches the fit and function of the original equipment hood latch and is made of corrosion-resistant materials for reliable service.
Product Features:
See More
Product Features:
- Direct replacement – this hood latch assembly matches the fit and function of the original equipment latch.
- Durable construction – corrosion-resistant housing enhances this latch’s durability and prevents functional deterioration.
- Easy installation – requires no special tools to replace
- Quality tested – this part has undergone vehicle fitment and material testing to ensure proper fit and reliable service
AutoCraft – Window Handle (Part No.76912)
from
$9.99
Worn or broken window crank handle leading to difficult window operation? Made of durable material for reliable performance, this window crank handle replaces the original equipment handle.
Product Features:
See More
Product Features:
- Ideal replacement – this window crank handle matches the fit and function of the original equipment component
- Durable construction – this window crank handle is made of durable material to withstand extended use
- Easy to install – this window crank requires no special tools to install
- Versatile design – this window crank handle is suitable for use in various locations in the vehicle
AutoCraft – Interior Door Handle (Part No.77030)
from
$21.99
Want a new interior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles
- Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
- Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
- Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace
AutoCraft – Exterior Door Handle (Part No.77023)
from
$21.99
Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
- Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
- Excellent value – original equipment quality at a lower price
- Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace
KAI – Exterior Door Handle (Part No.GMK403444076R)
from
$14.99
New Goodmark Passenger Side Chrome Outer Door Handle
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Exterior Door Handle (Part No.GMK403444076L)
from
$14.99
New Goodmark Driver Side Chrome Outer Door Handle
Product Features:
See More
Product Features:
- Made Of Die Cast
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Window Crank Handle (Part No.GMK403542182)
from
$9.99
New Goodmark Window Crank Handle With Black Knob
Product Features:
See More
Product Features:
- Made Of Die Cast
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
AutoCraft – Exterior Door Handle (Part No.77022)
from
$29.99
Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
- Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
- Excellent value – original equipment quality at a lower price
- Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace
KAI – Interior Door Handle (Part No.GMK403544178R)
from
$11.99
New Goodmark Passenger Side Inside Door Handle
Product Features:
See More
Product Features:
- Made Of Die Cast
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Top Picks for 1983 Buick Regal Bodies and Fender Parts
Upgrade Buick Regals with top-quality Bodies and Fender Parts parts, including 24 OEM and aftermarket selections for your 1983 model.
KAI – Deck Lid Seal (Part No.GMK403570378)
from
$89.99
New Goodmark Trunk Weatherstrip
Product Features:
See More
Product Features:
- Made Of Rubber
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Energy Suspension – Body Mount Set (Part No.3.4141R)
from
$232.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
Product Features:
See More
Product Features:
- Replace to Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
Energy Suspension – Body Mount Set (Part No.3.4141G)
from
$232.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
Product Features:
See More
Product Features:
- Replace to Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
KAI – Floor Pan (Part No.GMK403551078L)
from
$134.99
New Goodmark Rear Driver Floor Section
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – A-Pillar Trim Plug (Part No.GMK4010453621S)
from
$14.99
New Goodmark 12 Piece Trim Panel Mounting Plug Set
Product Features:
See More
Product Features:
- 12 Piece
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Metro Mould – T-Top Panel Seal (Part No.TP 5020)
from
$670.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro T-Top Seals all have that show winning look and fit. Our T-Top Seals have a perfect fit. T-Top to Body Seals. Fits models with factory T-top option. Replaces OEM #20211820/20211821. For matching T-Top Side Rail Seals, see ELP 5020. Pair.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
KAI – Body A-Pillar (Part No.GMK4062381781R)
from
$256.99
New Goodmark Passenger Side 4 Piece A-Pillar Assembly Welded Into One, For Models With T-Top Roof
Product Features:
See More
Product Features:
- For Models With T-Top Roof
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Body A-Pillar (Part No.GMK4062381781L)
from
$256.99
New Goodmark Driver Side 4 Piece Welded Into One A-Pillar Assembly, For Models With T-Top Roof
Product Features:
See More
Product Features:
- For Models With T-Top Roof
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Floor Pan (Part No.GMK403551078R)
from
$143.99
New Goodmark Rear Passenger Floor Section
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Floor Pan (Part No.GMK403550578L)
from
$133.99
New Goodmark Front Driver Floor Section
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Floor Pan (Part No.GMK403550578R)
from
$133.99
New Goodmark Front Passenger Floor Section
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Rocker Panel (Part No.GMK403546078R)
from
$109.99
New Goodmark Rocker Panel, Inner, Passenger Side
Product Features:
See More
Product Features:
- Inner Passenger Side
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Rocker Panel (Part No.GMK403546078L)
from
$109.99
New Goodmark Rocker Panel, Inner, Driver Side
Product Features:
See More
Product Features:
- Inner Driver Side
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Quarter Panel (Part No.GMK446269081L)
from
$102.99
New Goodmark Driver Side Rear Lower Quarter Panel Skin Piece
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Quarter Panel (Part No.GMK446269081R)
from
$102.99
New Goodmark Passenger Side Rear Lower Quarter Panel Skin Piece
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Quarter Panel (Part No.GMK446261081L)
from
$101.99
New Goodmark Driver Side Front Lower Quarter Panel Skin Piece
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Quarter Panel (Part No.GMK446261081R)
from
$101.99
New Goodmark Passenger Side Front Lower Quarter Panel Skin Piece
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Wheel Arch Panel (Part No.GMK446265081R)
from
$99.99
New Goodmark Wheel Arch Patch Panel, Passenger Side Upper
Product Features:
See More
Product Features:
- Passenger Side Upper
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Wheel Arch Panel (Part No.GMK446265081L)
from
$99.99
New Goodmark Driver Side Upper Wheel Arch Repair Panel
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Console Bracket (Part No.GMK4562507813S)
from
$69.99
New Goodmark Center Console Conversion Bracket
Product Features:
See More
Product Features:
- Made Of Metal
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Floor Plug (Part No.GMK4035512781)
from
$7.99
New Goodmark Trunk Floor Drain Plug
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Needa Parts – BODY FASTENER (Part No.455220B)
from
$4.99
BODY FASTENER
Metro Mould – Moulding Clip (Part No.WF 211)
from
$3.49
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Rear Windshield Reveal Molding Clip. Made of steel. 15/16 In. X 3/4 In. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense material to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Needa Parts – Panel Trim Retainer – Interior – GM/Chrysler (Part No.45478)
from
$2.49
Needa Parts, a division of the Hillman Group, is an industry leader in all types of automotive body fasteners, retainers, and clips, offering over 400 SKUs of interior, exterior, and underhood fasteners.
Product Features:
See More
Product Features:
- Needa Parts offers a complete assortment for all popular makes and models
- Vehicle make specific fastener kits are available
- All fasteners meet or exceed OEM standards
In-Demand Vehicle Doors for 1983 Buick Regals
Select from 27 premium Vehicle Doors parts for your 1983 Buick Regal, with prices ranging from $1.79 to $369.99.
Dorman – Help – Door Striker Bolt Kit – 7/16 In.-14 (Part No.38428)
from
$11.99
This door lock striker is designed to match the fit and function of the original striker on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this door lock striker is designed to match the fit and function of the original striker on specified vehicles.
- Restores functionality – reliable replacement for an original part that has failed due to collision damage or fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Locksmart – Door Lock Kit (Part No.DL15800)
from
$24.29
LockSmart® is a specialized aftermarket lock brand featuring door, trunk, and ignition lock cylinders. LockSmart® provides OE fit, form, and function locks across domestic and import applications for both late and older model vehicles.
Product Features:
See More
Product Features:
- All door locks are perfectly matched to the original for precision installation
- Professional quality construction using solid brass tumblers, chrome plated brass keys, die-cast zinc lock cores and multiple, randomly assigned key codes ensures superior operation
- Decades of industry leading research and development focused on meeting the technician’s needs
- With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
Dorman – Help – Door Lock Rod Clips (Part No.75455)
from
$7.99
This door lock rod clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this door lock rod clip matches the fit and function of the factory part on specified years, makes and models.
- Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Door Hinge Bushing Assortment – 4 Sizes (Part No.38374)
from
$7.99
This door hinge bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this door hinge bushing matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Door Lock Rod Clips (Part No.75453)
from
$3.99
This door lock rod clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this door lock rod clip matches the fit and function of the factory part on specified years, makes and models.
- Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest – Door Jamb Switch (Part No.S208)
from
$11.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- Our parts are 100% tested to verify both mechanical and electrical switching performance.
- Decades of industry leading research and development focused on meeting the technician’s needs
- Robust design and high grade materials meet the stringent demands of today’s service professional
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Needa Parts – Door Hinge Bushings, .345 In. Id X .420 In. Od X .305 In. Height (Part No.38375)
from
$1.79
This door hinge bushing is designed to match the fit & function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this door hinge bushing matches the fit and function of the factory part on specified years, makes and models.
- Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
KAI – Door Hinge (Part No.GMK4035401781R)
from
$75.99
New Goodmark Passenger Side Front Upper Door Hinge
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Carquest Premium – Door Jamb Switch (Part No.SAA3753)
from
$5.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Metro Mould – Door Seal (Part No.LM 16-S/R)
from
$271.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Rear Molded Door Seals. For 4-door sedan only. Pair. R&L.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
KAI – Door Hinge (Part No.GMK4035401781L)
from
$75.99
New Goodmark Driver Side Front Upper Door Hinge
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Door Hinge (Part No.GMK4035401782)
from
$53.99
New Goodmark Driver Or Passenger Side Front Lower Door Hinge
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Carquest Premium – Door Lock Switch (Part No.SBA4541)
from
$13.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Door Lock Kit (Part No.DLC1051)
from
$20.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
KAI – Door Lock Striker (Part No.GMK403560678)
from
$38.99
New Goodmark Door Lock Striker, Allen Head Bolt With Collar
Product Features:
See More
Product Features:
- Allen Head Bolt With Collar
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Needa Parts – Door Hinge Bushings, .344 In. Id X .490 In. Od X .370 In. Height (Part No.38376)
from
$2.29
This door hinge bushing is designed to match the fit & function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this door hinge bushing matches the fit and function of the factory part on specified years, makes and models.
- Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Metro Mould – Window Sweeper Kit (Part No.WC 1800-20)
from
$369.99
Window Sweeper Kit
KAI – Door Outer Panel (Part No.GMK456245081R)
from
$343.99
New Goodmark Passenger Side Door Skin, For 2 Door Models
Product Features:
See More
Product Features:
- For 2 Door Models
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Door Outer Panel (Part No.GMK456245081L)
from
$343.99
New Goodmark Driver Side Door Skin, For 2 Door Models
Product Features:
See More
Product Features:
- For 2 Door Models
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Metro Mould – Door Seal (Part No.LM 16-S)
from
$271.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Front Molded Door Seals. For 4-door sedan and wagon. Pair. R&L.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Door Seal (Part No.LM 16-JR)
from
$266.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Molded Door Seals. Pair. R&L.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
KAI – Door Seal (Part No.GMK4035425781P)
from
$179.99
New Goodmark Driver And Passenger Side Pair Of Door Weatherstrips, For 2 Door Models
Product Features:
See More
Product Features:
- For 2 Door Models
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Door Sill Plate (Part No.GMK403557578)
from
$129.99
New Goodmark Driver Or Passenger Side Door Sill Plate With Emblem, For 2 Door Vehicles
Product Features:
See More
Product Features:
- For 2 Door Vehicles
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Metro Mould – Door Seal (Part No.LM 16-S/W)
from
$113.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Rear Molded Door Seals. For 4-door wagon only, with RWD. Pair. R&L.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Dorman – Help – Door Lock Switch – Front Left & Right, 1 Button (Part No.49244)
from
$32.99
This door lock switch is designed to match the appearance and function of the original switch on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this door lock switch is made to match the fit and performance of the original switch on specific vehicle applications.
- Ideal solution – this switch is a reliable replacement for an original part that has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Premium – Door Lock Kit (Part No.DLC1167)
from
$22.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Door Jamb Switch (Part No.SBA4439)
from
$6.79
The main device in any electrical circuit is a switch. In an electrical circuit a device is required to turn a component on or off when commanded by the operator, within the switch are contacts that will complete the electrical path to the load, or driven device. The operation of a switch may be manual from a person or could be electrical from some sort of controller or computer.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
- Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Most Sold 1983 Buick Regal Vehicle Windows
Explore our best-selling Buick parts for the 1983 Regal among 1 OEM and aftermarket options starting from $8.99.
Dorman – Help – Window Track Guide (Part No.74444)
from
$8.99
This window regulator roller is designed to match the fit and function of the original roller on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this window regulator roller is designed to match the fit and function of the original part on specified vehicles.
- Restores functionality – reliable replacement for a roller that has failed due to wear
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Top-Rated Body Parts Brands For Your 1983 Buick Regal
Shop for the best-rated brands offering Body Parts and other products for your 1983 Buick Regals. Below you’ll find some of our best rated Body Parts from StrongArm, Dorman, and Carquest, and more. Body Parts from these brands that fit a 1983 Regal start at just $3.99 and are rated as high as 5 stars. OEM and aftermarket Body Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular StrongArm 1983 Buick Regal Body Parts
When it comes to maintaining or upgrading your 1983 Buick Regal, using quality Body Parts is essential to ensure durability and a perfect fit. StrongArm ticks all of those boxes. We offer a wide selection of StrongArm Body Parts, specifically designed for the 1983 Buick Regal. With over 4 StrongArm brand Body Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $16.99, with an average price of just $19.49. Plus, with over 10 customer reviews and an average rating of 5 stars, you can trust that our StrongArm Body Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$16.99
$16.99
This product is not rated
Trunk Lift Support: 9.82" Ext Length, 3.46" Travel, 191 Lbs of Force, 1 Pk
“”
from
$19.99
$19.99
(3)
Back Glass Lift Support: 18.0" Ext Length, 6.61" Travel, 38 Lbs of Force, 1 Pk
“Easy to install works great”
from
$18.99
$18.99
This product is not rated
Hood Lift Support: 15.35" Ext Length, 5.62" Travel, 96 Lbs of Force, 1 Pk
“”
Popular Dorman 1983 Buick Regal Body Parts
Dorman auto parts is one of the highest quality Body Part brands in the market. Any 1983 Buick Regal owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 1983 Regal, Advance Auto Parts carries a full inventory of 12 Dorman Body Parts. Plus you will be keeping your Buick in peak condition while saving money because prices on these Dorman Body Parts range from $3.99 to $81.99, plus, with more than 47 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Body Parts below will deliver on both quality and value.
FAQs for 1983 Buick Regal Body Parts
Which Body Parts are best-sellers for 1983 Buick Regals?
Out of 95 Body Parts that fit 1983 Buick Regals, the following parts are the top sellers:
- Door Hinge Pin And Bushing Kit – 1 Pins And 4 Bushings (5701430) – $8.49
- Door Striker Bolt Kit – 7/16 In.-14 (17190268) – $11.99
- Door Lock Rod Clips (9111654) – $7.99
What’s the price range for 1983 Buick Regal Body Parts?
Body Part prices for the 1983 Buick Regal start at $1.79 and go up to $670.99 for the most premium parts.
What’s the average price of a Body Part for a 1983 Buick Regal?
The average price for Body Parts for the 1983 Buick Regal is $78.02. Keep in mind the variety of part types within our Body Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Body Parts for other Buick Regal model years?
What are the cheapest Body Parts for my 1983 Buick Regal?
The cheapest 1983 Buick Regal Body Parts we carry in stock are:
- Door Hinge Bushings, .345 In. Id X .420 In. Od X .305 In. Height (9111131) – $1.79
- Door Hinge Bushings, .344 In. Id X .490 In. Od X .370 In. Height (9111158) – $2.29
- Panel Trim Retainer – Interior – GM/Chrysler (9110488) – $2.49
- Moulding Clip (10443001) – $3.49
- Door Lock Rod Clips (17190420) – $3.99
What are the top-rated Body Parts that fit the 1983 Buick Regal?
Out of 861 reviews by customers, our 1983 Buick Regal Body Parts have an average customer rating of . These are some of the highest-rated Body Part types for the 1983 Buick Regal and their top-rated products:
- Vehicle Hoods
- Back Glass Lift Support: 18.0" Ext Length, 6.61" Travel, 38 Lbs of Force, 1 Pk (5940362) – $19.99
- Hood Lift Support: 15.33" Ext Length, 5.57" Travel, 130 Lbs of Force, 1 Pk (5701325) – $21.99
- Power Window Parts
- Back Glass Lift Support: 18.0" Ext Length, 6.61" Travel, 38 Lbs of Force, 1 Pk (5940362) – $19.99
- Hood Lift Support: 15.33" Ext Length, 5.57" Travel, 130 Lbs of Force, 1 Pk (5701325) – $21.99
What types of Body Parts do you sell for my 1983 Buick Regal?
As of 2/5/25, these are some of the most in-demand types of Body Parts for a 1983 Buick Regal:
Can I get help with 1983 Buick Regal Body Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Buick Body Parts and more.
What is your return policy for Buick Regal Body Parts?
Advance Auto Parts keeps returns simple. For new Buick Regal Body Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
