1982 Western Star WSH Car Parts & Accessories

Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.

Product Features:

• Molded notches reduce bending stress, especially on small-diameter pulleys, while dissipating heat.
• High modulus, high strength tensile cord
• Oil and heat resistant construction
• Meets SAE J636b and SAE J637 specifications
• Meets RMA standards for oil and heat resistance and static conductivity requirements
• NOTE: Some sizes are available as Gates PowerBand V-Belts

Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

• The patented material provides optimal performance at extremely high operating temperatures.
• Construction that resists cracking, wear, oil and heat
• The special compound provides unprecedented flexibility, stability, load-bearing capacity and belt life.
• Unique notch pattern offers greater flexibility for smaller diameter pulleys
• Problem solver for troubled drives
• Designed to save your fleet money and reduce downtime
• Meets RMA oil and heat resistant standards and static conductivity requirements

Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.

Product Features:

• Molded notches reduce bending stresses, especially on small-diameter pulleys, while dissipating heat.
• High modulus, high strength tensile cord
• Oil and heat resistant construction
• Meets SAE J636b and SAE J637 specifications
• Meets RMA standards for oil and heat resistance and static conductivity requirements
• NOTE: Some sizes are available as Gates PowerBand V-Belts

Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

• Proprietary material provides maximum performance at extremely long operating temperatures
• Construction that resists cracking, wear, oil and heat
• The special compound provides unprecedented flexibility, stability, load-bearing capacity and belt life.
• Unique under-cord notch pattern provides greater flexibility for smaller diameter pulleys
• Problem solver for failed disks
• Engineered to save your fleet money and reduce downtime
• Meets RMA standards for oil and heat resistance and static conductivity requirements

Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

• The patented material provides optimal performance at extremely high operating temperatures.
• Construction that resists cracking, wear, oil and heat
• A special compound ensures unmatched stability, load capacity and belt life.
• Unique under-cord notch pattern provides greater flexibility for smaller diameter pulleys
• Problem solver for failed disks
• Engineered to save your fleet money and reduce downtime
• Meets RMA oil and heat resistant standards and static conductivity requirements

Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

• Patented material provides peak performance at extremely prolonged operating temperatures
• Heavy-duty construction resists cracking, wear, oil and heat
• Special compound provides unmatched stability, load carrying capacity and belt life
• Unique notch pattern offers greater flexibility for smaller diameter pulleys
• Troubleshooter for troubled drives
• Designed to save your fleet’s money and reduce downtime
• Meets RMA standards for oil and heat resistance and static conductivity requirements

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

• Fiber-loaded rubber mount adds flexibility along the belt and provides greater lateral stability on the pulley
• Ground to ensure precise dimensional control of the top width and sidewall for proper adjustment to the pulley.
• Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
• Resists oil, heat, ozone, weather and aging for improved belt life
• Meets or exceeds SAE J636C specifications

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

• Specifically-engineered materials resist collapse under vacuum
• Engineered to resist electrochemical degradation, the leading cause of hose failure
• Pre-formed for a good fit and to ensure perfectly sealed connections
• EPDM Tube; synthetic fiber knit reinforcement; EPDM cover resistant to heat, ozone and chemical refrigerants
• Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
• Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
• Note: Gates recommends replacing clamps and connectors each time a new cooling hose is installed.
• Warning: Do not use for fuel or oil transfer applications

Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.

Product Features:

• Molded notches reduce bending stress, especially on small diameter pulleys, while dissipating heat
• High-modulus, high-strength pull cord
• Oil and heat resistant construction
• Meets SAE J636b and SAE J637 specifications
• Meets RMA oil and heat resistant standards and static conductivity requirements
• NOTE: Some sizes available as Gates PowerBand joined V-belts

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

• Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
• Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
• Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
• Resists oil, heat, ozone, weather and aging for improved belt life
• Meets or exceeds SAE J636C specifications

Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

• The patented material provides optimal performance at prolonged extreme operating temperatures.
• Heavy-duty construction resists cracking and wear, even at extreme temperatures
• Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
• A problem-solving tool designed for the toughest applications
• Consistently outperforms other heavy-duty coil belts on the market
• Designed to save your fleet’s money and reduce downtime
• Tensioner Replacement is Recommended (if equipped)

Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.

Product Features:

• Molded notches reduce bending stress, especially on small diameter pulleys, while dissipating heat
• High modulus, high strength tensile cord
• Oil and heat resistant construction
• Meets SAE J636b and SAE J637 specifications
• Meets RMA standards for oil and heat resistance and static conductivity requirements
• NOTE: Some sizes are available as Gates PowerBand V-Belts

Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

• Proprietary material provides maximum performance at extremely long operating temperatures
• Crack, wear, oil, and heat resistant construction
• Special compound provides unmatched stability, load carrying capacity and belt life
• Unique undercord notch pattern offers increased flexibility for smaller diameter pulleys
• Problem solver for troubled drives
• Engineered to save your fleet money and reduce downtime
• Meets RMA standards for oil and heat resistance and static conductivity requirements

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

• The fiber-filled rubber adds flexibility along the entire length of the belt and provides greater lateral stability in the pulley.
• The shape is ground to ensure precise dimensional control of the top width and sidewall for a correct fit to the pulley.
• Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
• Resists oil, heat, ozone, weather, and decay to improve belt life
• Meets or exceeds SAE J636C specifications

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

• The fiber-filled rubber adds flexibility along the entire length of the belt and provides greater lateral stability in the pulley.
• Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
• Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
• Resistant to oil, heat, ozone, weathering, and aging for better belt life.
• Meets or exceeds SAE J636C specifications

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

• The fiber-filled rubber adds flexibility along the entire length of the belt and provides greater lateral stability in the pulley.
• Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
• Thermally active pull cords for maintenance-free operation when the strap is properly installed and tensioned
• Resists oil, heat, ozone, weather, and decay to improve belt life
• Meets or exceeds SAE J636C specifications

Carquest Premium Oil Spin-on Filters protect your engine by removing contaminants, such as dirt, metal particles, and sludge, from your engine oil. These filters effectively remove contaminants that can cause significant wear and damage to critical engine components. The spin-on design screws directly onto a mounting head, allowing for easy servicing and replacement. By keeping the oil clean, these filters help ensure proper lubrication and cooling, reduce friction and help extend engine life. Carquest Premium Oil Spin-on Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
• Made in USA
• Includes Integral Post Seal

Carquest Premium Fuel Spin-on Filters protect your engine and fuel system by removing dirt, rust, and other impurities from the fuel before it reaches your engine fuel system. These filters effectively remove contaminants to prevent clogging and damage to fuel injectors, pumps and other critical engine components. The spin-on design screws directly onto a mounting head, allowing for easy servicing and replacement. By keeping the fuel clean, these filters help ensure optimal combustion, improve engine efficiency, and reduce emissions. Carquest Premium Fuel Spin-on Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
• Made in USA

Carquest Premium Fuel Spin-on Filters protect your engine and fuel system by removing dirt, rust, and other impurities from the fuel before it reaches your engine fuel system. These filters effectively remove contaminants to prevent clogging and damage to fuel injectors, pumps and other critical engine components. The spin-on design screws directly onto a mounting head, allowing for easy servicing and replacement. By keeping the fuel clean, these filters help ensure optimal combustion, improve engine efficiency, and reduce emissions. Carquest Premium Fuel Spin-on Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
• Contains Integral Post Seal
• Includes Integral Post Seal
• Can be used with 89097 base.

Carquest Premium Oil Spin-on Filters protect your engine by removing contaminants, such as dirt, metal particles, and sludge, from your engine oil. These filters effectively remove contaminants that can cause significant wear and damage to critical engine components. The spin-on design screws directly onto a mounting head, allowing for easy servicing and replacement. By keeping the oil clean, these filters help ensure proper lubrication and cooling, reduce friction and help extend engine life. Carquest Premium Oil Spin-on Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
• Made in USA

Carquest Premium Oil Spin-on Filters protect your engine by removing contaminants, such as dirt, metal particles, and sludge, from your engine oil. These filters effectively remove contaminants that can cause significant wear and damage to critical engine components. The spin-on design screws directly onto a mounting head, allowing for easy servicing and replacement. By keeping the oil clean, these filters help ensure proper lubrication and cooling, reduce friction and help extend engine life. Carquest Premium Oil Spin-on Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Can be used with 89750 base.
• Made in USA
• Can be used with 89750 base.

Carquest Premium Oil Cartridge Filters protect your engine by removing contaminants, such as dirt, metal particles, and sludge, from your engine oil. These filters effectively remove contaminants that can cause significant wear and damage to critical engine components. The cartridge design installs in a housing, allowing for easy servicing and replacement. By keeping the oil clean, these filters help ensure proper lubrication and cooling, reduce friction and help extend engine life. Carquest Premium Oil Cartridge Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
• Made in USA

Carquest Premium Air Filters ensure your equipment runs smoothly with our high-quality filtration media that prevents airborne contaminants, such as dust, dirt, and debris, from reaching your combustion chamber. Protecting critical engine components from wear and damage helps maintain optimal engine power, improve fuel efficiency, and extend engine life – keeping your equipment performing at its best. Carquest Premium Air Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Axial seal primary air filter
• Inside-Out Flow Direction, Positive foam sealing design, metal end caps
• Expanded metal exterior protecting the Application Specific Media
• Made in USA
• Inside-Out Flow Direction

Carquest Premium Oil Spin-on Filters protect your engine by removing contaminants, such as dirt, metal particles, and sludge, from your engine oil. These filters effectively remove contaminants that can cause significant wear and damage to critical engine components. The spin-on design screws directly onto a mounting head, allowing for easy servicing and replacement. By keeping the oil clean, these filters help ensure proper lubrication and cooling, reduce friction and help extend engine life. Carquest Premium Oil Spin-on Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Integral Post Seal
• Made in USA
• Includes Integral Post Seal

Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:

• Meets or exceeds OE design and performance
• Magnetic size and properties compare or exceed OEM
• Windings meet or exceed OEM specifications
• Motor RPM equivalent to or exceeds OEM motor
• Meets or exceeds OE design and performance
• Magnetic size and properties compare or exceed OEM
• Windings meet or exceed OEM specifications
• Motor RPM equivalent to or exceeds OEM motor

Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:

• Meets or exceeds OE design and performance
• Magnetic size and properties compare or exceed OEM
• Windings meet or exceed OEM specifications
• Motor RPM equivalent to or exceeds OEM motor
• Meets or exceeds OE design and performance
• Magnetic size and properties compare or exceed OEM
• Windings meet or exceed OEM specifications
• Motor RPM equivalent to or exceeds OEM motor

Carquest Premium Coolant Filters protect your engine’s cooling system by filtering out rust, scale, dirt, and other particles from the coolant fluid. Coolant filters remove contaminants that build up and cause clogging or corrosion in the radiator, water pump, heater core, and engine passages. By keeping the coolant clean and effective, these filters help prevent overheating and ensure optimal engine performance. Carquest Premium Coolant Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Standard life Spin-on coolant filter
• Made in USA
• Includes 4 Units BTA PLUS
• Maintenance filter for systems with 7-16 gallons capacity. Can be used with 89019 base.

Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:

• Meets or exceeds OE design and performance
• Magnetic size and properties compare or exceed OEM
• Windings meet or exceed OEM specifications
• Motor RPM equivalent to or exceeds OEM motor
• Meets or exceeds OE design and performance
• Magnetic size and properties compare or exceed OEM
• Windings meet or exceed OEM specifications
• Motor RPM equivalent to or exceeds OEM motor

Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:

• Meets or exceeds OE design and performance
• Magnetic size and properties compare or exceed OEM
• Windings meet or exceed OEM specifications
• Motor RPM equivalent to or exceeds OEM motor
• Meets or exceeds OE design and performance
• Magnetic size and properties compare or exceed OEM
• Windings meet or exceed OEM specifications
• Motor RPM equivalent to or exceeds OEM motor

Gates carries a huge line of water pumps for heavy duty applications. Our heavy duty water pump offering is designed to handle rugged Fleet standards.

Product Features:

• Our heavy-duty water pump offering is designed to handle severe and rigorous conditions
• Fully tested unitized bearings and seals
• Computerized machined surfaces for perfect installation and sealing
• Gates heavy-duty water pumps are represented by a part number with an HD suffix.
• Warranty: 18 months or 150,000 miles/5,400 hours, whichever comes first
• New pumps manufactured according to ISO/TS 16949 standards

Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:

• 100% tested for reliable performance
• Durable housing features precisely machined mounting surface for proper sealing and fitment
• Equipped with weep chamber or similar feature to help prevent unnecessary replacement
• Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
• All gaskets or seals necessary for water pump are included
• This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
• This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
• This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components

The ASC New Tensioner Pulley features all new, original equipment-quality components for proper fit and long-life performance. Each idler includes heavy-duty unitized bearings and are 100% factory tested to assure the highest quality product. Each unit is built to meet or exceed all Original Equipment specifications and is validated for fit, form, and function. Also, application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust.

Product Features:

• This pulley is used on accessory belt driven applications
• Cast Iron
• All bolts necessary for installation are supplied with pulley
• Durable housing features precisely machined mounting surfaces for proper fit

Carquest Premium coolant temperature sensors and switches are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry, Carquest Premium coolant temperature sensors and switches undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium coolant temperature sensors and switches are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• 
  
  

Product Features:

• Designed to meet or exceed OE specifications for fit, form and function
• 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
• OE precision matched thermistor ensuring Carquest sensors match OE output resistances across all temperature positions
• O-rings, seals or thread sealant are included if required
• Weather-tight connectors prevent leaks and corrosion for longer life
• Extensive design validation testing and 100% end-of-line tested
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

ZEREX G05® is the automaker approved original chemistry used in newer Ford®, Chrysler® and Mercedes-Benz® automotive and diesel engines. Its Hybrid Organic Acid Technology (HOAT) chemistry combines the best of conventional and organic acid-based chemistry to provide the ultimate protection against rust and corrosion. ZEREX G05 antifreeze/coolant uses the highest-quality virgin ethylene glycol for freeze and boil over protection and a hybrid organic acid corrosion inhibitor package to protect your engines from liner pitting and corrosion.

Product Features:

• Automaker approved technology. Provides protection for 5 years / 150,000 miles in light duty applications and 3 years / 300,000 miles in heavy duty applications.
• Formulated for long life performance
• Low-silicate, low-pH and phosphate-free formula
• Helps protect all cooling system metals, including aluminum

ZEREX G05® is the automaker approved original chemistry used in newer Ford®, Chrysler® and Mercedes-Benz® automotive and diesel engines. Its Hybrid Organic Acid Technology (HOAT) chemistry combines the best of conventional and organic acid-based chemistry to provide the ultimate protection against rust and corrosion. ZEREX G05® antifreeze/coolant uses the highest quality virgin ethylene glycol for freeze and boil over protection and a hybrid organic acid corrosion inhibitor package to protect your engines from liner pitting and corrosion.

Product Features:

• Automaker approved technology. Provides protection for 5 years / 150,000 miles in light duty applications and 3 years / 300,000 miles in heavy duty applications
• Formulated for long life performance
• Low-silicate, low-pH and phosphate-free formula
• Helps protect all cooling system metals, including aluminum

Prestone Command Nitrites (NOAT) Extended Life (ELC) antifreeze+coolant (ready to use) is designed to work with all Class 6-8 vehicles. When compared to ESI and low silicate conventional, it is designed to help lower maintenance costs and improve water pump life. It is compatible with any Nitrites OAT engine. This formula is Nitrites and provides excellent protection for aluminum and all other engine metals. Command NOAT ELC protects against liner pitting and corrosion protections.

Product Features:

• Nitrites Extended Life Coolant – NOAT ELC – Red formula. Compatible with any Nitrites OAT
• Helps lower maintenance costs and improve water pump life when compared to ESI coolants
• Meets OEM Performance requirements: ASTM D6210, D3306, D4985; TMC RP329A, RP338A, RP364; Cummings CES 14439; Cat EC-1 and many OEM requirements
• Ready to Use formula (prediluted to a 50% Eg and 50% distilled water mix). Perfect for small volume top-off or complete drain and refill of the cooling system

Prestone Command Nitrites (NOAT) Extended Life (ELC) antifreeze+coolant (Concentrate) is designed to work with all Class 6-8 vehicles. When compared to ESI and low silicate conventional, it is designed to help lower maintenance costs and improve water pump life. It is compatible with any Nitrites OAT engine. This formula is Nitrites and provides excellent protection for aluminum and all other engine metals. Command NOAT ELC protects against liner pitting and corrosion protections.

Product Features:

• Nitrites Extended Life Coolant – NOAT ELC – Red formula. Compatible with any Nitrites OAT
• Helps lower maintenance costs and improve water pump life when compared to ESI coolants
• Meets OEM Performance requirements: ASTM D6210, D3306, D4985; TMC RP329A, RP338A, RP364; Cummings CES 14439; Cat EC-1 and many OEM requirements
• Concentrated formula. Must mix with high quality (distilled/deionized) water to the desired ratio. Can be used for top-off, complete drain and refill or flush and refill of the cooling system.

Prestone Command Cor-Guard Nitrite Free (NF-OAT) Extended Life (ELC) antifreeze+coolant (Concentrate) is designed to work with all Class 1-8 vehicles; Heavy Duty and Light Duty. COR-GUARD technology increases uptime; More miles between service = Less cost to maintain. Utilizing Cor-Guard technology, this formula is designed to protect cooling system parts from corrosion and damage. It instantly protects against the spread of rust, corrosion, pitting, gunk, grime and build-up. It is one fluid that can be used for the whole fleet; all vehicles, coolant colors (LD) and any Nitrite Free OAT engine (HD). Service life is 1,000,000 Miles/20,000 hrs [class 7-8 with wet sleeve liners]. When compared to ESI and low silicate conventional, it is designed to help lower maintenance costs and improve water pump life. This formula is Nitrite Free, provides excellent protection for aluminum and all other engine metals and eliminates the need to add supplemental coolant additives.

Product Features:

• Cor-Guard Nitrite Free Extended Life Coolant – NF-OAT ELC – RED formula. Compatible with any Nitrite Free OAT and all Light Duty vehicles
• COR-GUARD technology increases uptime; More miles between service = Less cost to maintain. Instantly stops the spread of rust, corrosion, pitting, gunk, grime and build-up
• Meets OEM Performance requirements: ASTM D6210, D3306, D4985, D7583; TMC RP338A, RP364; Cummings CES 14603, bulletin 3666132; Detroit Diesel 93K217; Cat EC-1 and many OEM requirements
• Concentrated formula. Must mix with high quality (distilled/deionized) water to the desired ratio. Can be used for top-off, complete drain and refill or flush and refill of the cooling system.

Prestone Command Cor-Guard Nitrite Free (NF-OAT) Extended Life (ELC) antifreeze+coolant (ready to use) is designed to work with all Class 1-8 vehicles; Heavy Duty and Light Duty. COR-GUARD technology increases uptime; More miles between service = Less cost to maintain. Utilizing Cor-Guard technology, this formula is designed to protect cooling system parts from corrosion and damage. It instantly protects against the spread of rust, corrosion, pitting, gunk, grime and build-up. It is one fluid that can be used for the whole fleet; all vehicles, coolant colors (LD) and any Nitrite Free OAT engine (HD). Service life is 1,000,000 Miles/20,000 hrs [class 7-8 with wet sleeve liners]. When compared to ESI and low silicate conventional, it is designed to help lower maintenance costs and improve water pump life. This formula is Nitrite Free, provides excellent protection for aluminum and all other engine metals and eliminates the need to add supplemental coolant additives.

Product Features:

• Cor-Guard Nitrite Free Extended Life Coolant – NF-OAT ELC – RED formula. Compatible with any Nitrite Free OAT and all Light Duty vehicles
• COR-GUARD technology increases uptime; More miles between service = Less cost to maintain. Instantly stops the spread of rust, corrosion, pitting, gunk, grime and build-up
• Meets OEM Performance requirements: ASTM D6210, D3306, D4985, D7583; TMC RP338A, RP364; Cummings CES 14603, bulletin 3666132; Detroit Diesel 93K217; Cat EC-1 and many OEM requirements
• Ready to Use formula (prediluted to a 50% Eg and 50% distilled water mix). Perfect for small volume top-off or complete drain and refill of the cooling system

Carquest Premium Fuel/Water Separator Filters remove water and other impurities from the fuel before it reaches your engine fuel system. These filters effectively separate water from the fuel, preventing corrosion and damage to fuel injectors, pumps and other critical engine components. By keeping the fuel clean and water-free, these filters help ensure optimal combustion, improve engine efficiency, and reduce emissions. Carquest Premium Fuel/Water Separator Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
• Application engineered media which aids in stripping water in diesel fuels
• Patent pending drain, metal end caps, which hold media in place
• Rust resistant can, ensuring no leakage from inside
• Made in USA
• CAUTION: Furnished D-Ring must be installed on post for seal.
• Use with 99185