1982 Pontiac 6000 Performance and Racing Products

Essential Performance and Racing Products for 1982 Pontiac 6000s

Mallory – Unilite Ignition Module (Part No.605)

Unilite Ignition Module

from

$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:
  • Service Part
  • No Moving Parts To Wear Out
  • Self Contained Unit
  • Can Drive OEM
  • Can Drive High Performance Ignition Coils
See More

MSD Ignition – High Energy Ignition Coil for GM HEI Distributors (Part No.8225)

High Energy Ignition Coil for GM HEI Distributors

from

$112.99
HEI owners now have a choice to replace their stock coil with the MSD high energy unitized coil for GM HEI distributors. This coil is a direct replacement of the stock coil and offers increased spark energy when used with the MSD HEI module, PN 83645. The coil features special low induc?tance, high temperature windings which charge faster to give you increased spark energy at higher rpm. The premium epoxy filled construction is designed to withstand harsh race applications as well as the wear and tear that daily usage dishes out, and still deliver more spark energy to the spark plugs.

Product Features:
  • Direct performance replacement for GM HEI coil-in-cap dist.
  • 70:1 Turns Ratio
  • Lower Primary Resistance Produces High Voltage Output
  • Full Power Sparks To 9000 Rpm w/PN[83647] MSD HEI Module
See More

MSD Ignition – Coil; GM External HEI Coil; High Performance (Part No.8226)

Coil; GM External HEI Coil; High Performance

from

$71.99
Top off your GM ignition system with these great new replacement coils. The GM coils have MSD performance in factory style housings. MSD designed these coils by combining our blaster coil experience with e-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The coils will work with stock ignition systems as well as MSD equipped cars and trucks. Installation tip: If you plan to install an MSD ignition with your GM dual connector coil, use PN 8876 harness for a direct plug-in installation.

Product Features:
  • Direct performance replacement for GM dual connector coil
  • 100:1 Turns Ratio
  • Lower Primary Resistance Produces High Voltage Output
  • Works w/Stock Ignition As Well As MSD Ignitions
See More

Earls Performance Product – Brake Bleeder Screws (Part No.280029ERL)

Brake Bleeder Screws

from

$40.99
Brake Bleeder Screws

B & M – Torque Converter, Nitrous Holeshot 3600 (Part No.20482)

Torque Converter, Nitrous Holeshot 3600

from

$665.99
Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.

Product Features:
  • 3400-3800 RPM
  • Small And Big Blocks
  • Serious Performance
  • Furnace Brazed
  • Fully Balanced
See More

Accel – High Performance Ignition Module for GM HEI Distributors (Part No.35361)

High Performance Ignition Module for GM HEI Distributors

from

$69.99
This high performance HEI module provides your plugs with more spark over the stock module. The solid state electronics provide high coil out put and superior reliability. The Dwell control circuit ensures, long consistent coil charging. The current control circuit protects against coil over heating. This module fits most GM HEI for V8 engines with the 4 pin module 1974 thru 1985

Product Features:
  • Fits Most Stock And Modified Distributors
  • Solid State Electronics
  • Dwell Control Circuit
See More

Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

High Performance 180 Degree Thermostat for Increased Flow

from

$26.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:
  • Opens At 180 Degrees
  • Designed to Resist Large Variations of Coolant Pressure at High RPM
  • Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
  • For High Performance Street, Drag Race, and Oval Track
  • Copper & Brass Construction – Resists Corrosion
  • High Flow
See More

Edelbrock – Performer Carb/Plate Nitrous Systems for Spread-Bore (Q-Jet)Carbs (50-75-100 Hp) (Part No.70002)

Performer Carb/Plate Nitrous Systems for Spread-Bore (Q-Jet)Carbs (50-75-100 Hp)

from

$684.99


Product Features:
  • Designed For Carbureted V6 And V8 Engines
  • Use With Single Or Dual Plane Manifolds
  • Power Increases From 50 to 100 HP
  • Plate Systems are Easy to Install
  • Precision EDM Machined Spray Bars Maximize Flow
  • Option of Silver Powder Coated or Polished Bottle
  • Recommend Ignition Retard ; Upgraded Fuel System
  • Requires Use of Premium Fuel
See More

Edelbrock – Universal Performer Wet to Dry Nitrous Oxide System Conversion Kit (Part No.71884)

Universal Performer Wet to Dry Nitrous Oxide System Conversion Kit

from

$266.99
Product Features:
  • Wet To Dry Conversion System
  • Hose Included
  • Includes Fittings
  • Includes Solenoid
  • Includes All Necessary Installation Items
See More

Edelbrock – Universal Perfomer EFI Wet System in Polished Bottle -4 or 6-cyl (40, 60, 80 HP) (Part No.71008)

Universal Perfomer EFI Wet System in Polished Bottle -4 or 6-cyl (40, 60, 80 HP)

from

$842.99


Product Features:
  • Best Way To Get A Major Power Increase
  • Power Increases From 50-70 HP
  • Work With Stock ECU
  • Simple Installation
See More

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 2 Piece Set (Part No.1270)

Lower Intake Manifold Gasket Set: 2 Piece Set

from

$32.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Fel-Pro performance intake manifold gaskets have been tested with virtually all aftermarket cylinder head and intake manifold combinations.
  • No exhaust crossover openings or blocking shields
  • Embossed steel core laminate w/coating
  • Not intended for use in emission controlled vehicles.
See More

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1624)

Engine Valve Cover Gasket Set

from

$24.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
  • Not intended for use in emission controlled vehicles.
See More

Edelbrock – Universal Performer Dry to Wet Nitrous Oxide System Conversion Kit (Part No.71883)

Universal Performer Dry to Wet Nitrous Oxide System Conversion Kit

from

$226.99
Product Features:
  • Dry To Wet Conversion System
  • Hose Included
  • Includes Fittings
  • Includes Solenoid
  • Includes All Necessary Installation Items
See More

Edelbrock – Performer RPM Pro-Flo 4V EFI Systems (100-150 Hp) (Part No.70070)

Performer RPM Pro-Flo 4V EFI Systems (100-150 Hp)

from

$777.99


Product Features:
  • Designed For Pro-Flo EFI Systems
  • Simple To Install
See More

Edelbrock – Concealed Nitrous Kits for EFI Applications (20-30 Hp) (Part No.70028)

Concealed Nitrous Kits for EFI Applications (20-30 Hp)

from

$388.99


Product Features:
  • Easily Concealable
  • Install In Minutes
  • Quick Removal
  • No Obvious Signs Of Installation
  • No Obvious Signs Of Use
See More

Edelbrock – Universal Performer EFI Dry Systems for 4, 6 And 8 Cylinder Engine (50-70 Hp) (Part No.71006)

Universal Performer EFI Dry Systems for 4, 6 And 8 Cylinder Engine (50-70 Hp)

from

$926.99


Product Features:
  • Best Way To Get A Major Power Increase
  • Power Increases From 50-70 HP
  • Work With Stock ECU
  • Simple Installation
  • Detailed Instructions
See More

Edelbrock – Performer Carb/Plate Nitrous Systems for Square-Bore Carbs (50-75-100 Hp) (Part No.70001)

Performer Carb/Plate Nitrous Systems for Square-Bore Carbs (50-75-100 Hp)

from

$724.99
The Edelbrock Performer Nitrous Plate System #70001 is designed to increase your power from 50-100 horsepower. Edelbrock Nitrous systems are simple to install with a 1/2″ thick aluminum plate that fits between the carburetor and the intake manifold. Edelb
See More

Edelbrock – Performer Top Small-Block Chevy 4V Intake Manifold (Part No.3789)

Performer Top Small-Block Chevy 4V Intake Manifold

from

$205.99
Product Features:
  • Matching Top For Edelbrock Base Intake PN[3785]
  • Designed for Standard Flange 4-barrel Carburetor
  • Contains Necessary Linkage And Bracketry
  • Match With Edelbrock Valve Covers Pn[4488]
See More

Edelbrock – Performer Small-Block Chevy 2.8L Intake Manifold (Part No.3785)

Performer Small-Block Chevy 2.8L Intake Manifold

from

$361.99


Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Excellent Throttle Response and Mid-Range Power
  • 50-State Street Legal if Correct Carburetor Used
  • Ideal for Light-Duty Pickups and Passenger Cars
  • Unique Design Allows Use Of 2 bbl Or 4 bbl Top
See More

Upgrade your 1982 Pontiac 6000 with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 1982 Pontiac 6000, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Pontiac or enhancing its overall performance, Performance and Racing Products are key to keeping your 6000 functioning at its best. At Advance Auto Parts, we offer a wide selection of 20 Performance and Racing Products for the 1982 Pontiac 6000, designed to meet your needs without breaking the bank. From Performance Engine replacements to Nitrous and CO2 Systems upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1982 Pontiac 6000 at great prices. Our Performance and Racing Products inventory for this model ranges from just $24.49 to $926.99, with an average price of $316.42. Our 20 Performance and Racing Products in stock come from 8 trusted brands, so you’re sure to find the right part for your 1982 Pontiac 6000 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1982 Pontiac 6000, we stock popular OEM and aftermarket Performance and Racing Products from top names like Mr. Gasket, Accel, MSD Ignition, and more. Mr. Gasket Performance and Racing Products start at just $26.99 and boast an impressive 4 stars average rating from customers. Accel and MSD Ignition also bring quality to the table, with Performance and Racing Products available starting at $69.99, and at an average 4 stars rating. With 88 customer reviews and counting, our 1982 Pontiac 6000 Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1982 Pontiac 6000 is always ready to roll. We’re committed to providing you with everything you need to keep your 6000 in top shape, all in one place. Start shopping confidently below for your 1982 Pontiac 6000!

Best-Selling Performance Engines for 1982 Pontiac 6000s

Enhance the driving experience in your Pontiac with 6 quality Performance Engine components, starting at $24.49.

Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

High Performance 180 Degree Thermostat for Increased Flow

from

$26.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:
  • Opens At 180 Degrees
  • Designed to Resist Large Variations of Coolant Pressure at High RPM
  • Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
  • For High Performance Street, Drag Race, and Oval Track
  • Copper & Brass Construction – Resists Corrosion
  • High Flow
See More

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 2 Piece Set (Part No.1270)

Lower Intake Manifold Gasket Set: 2 Piece Set

from

$32.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Fel-Pro performance intake manifold gaskets have been tested with virtually all aftermarket cylinder head and intake manifold combinations.
  • No exhaust crossover openings or blocking shields
  • Embossed steel core laminate w/coating
  • Not intended for use in emission controlled vehicles.
See More

B & M – Torque Converter, Nitrous Holeshot 3600 (Part No.20482)

Torque Converter, Nitrous Holeshot 3600

from

$665.99
Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.

Product Features:
  • 3400-3800 RPM
  • Small And Big Blocks
  • Serious Performance
  • Furnace Brazed
  • Fully Balanced
See More

Edelbrock – Performer Small-Block Chevy 2.8L Intake Manifold (Part No.3785)

Performer Small-Block Chevy 2.8L Intake Manifold

from

$361.99


Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Excellent Throttle Response and Mid-Range Power
  • 50-State Street Legal if Correct Carburetor Used
  • Ideal for Light-Duty Pickups and Passenger Cars
  • Unique Design Allows Use Of 2 bbl Or 4 bbl Top
See More

Edelbrock – Performer Top Small-Block Chevy 4V Intake Manifold (Part No.3789)

Performer Top Small-Block Chevy 4V Intake Manifold

from

$205.99
Product Features:
  • Matching Top For Edelbrock Base Intake PN[3785]
  • Designed for Standard Flange 4-barrel Carburetor
  • Contains Necessary Linkage And Bracketry
  • Match With Edelbrock Valve Covers Pn[4488]
See More

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1624)

Engine Valve Cover Gasket Set

from

$24.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
  • Not intended for use in emission controlled vehicles.
See More

Most Popular 1982 Pontiac 6000 Nitrous and CO2 Systems

Customize your Pontiac with 8 Nitrous and CO2 Systems products like Performance Nitrous Systems and Nitrous Oxide Injection System Kit, all priced under $926.99.

Edelbrock – Universal Performer EFI Dry Systems for 4, 6 And 8 Cylinder Engine (50-70 Hp) (Part No.71006)

Universal Performer EFI Dry Systems for 4, 6 And 8 Cylinder Engine (50-70 Hp)

from

$926.99


Product Features:
  • Best Way To Get A Major Power Increase
  • Power Increases From 50-70 HP
  • Work With Stock ECU
  • Simple Installation
  • Detailed Instructions
See More

Edelbrock – Universal Perfomer EFI Wet System in Polished Bottle -4 or 6-cyl (40, 60, 80 HP) (Part No.71008)

Universal Perfomer EFI Wet System in Polished Bottle -4 or 6-cyl (40, 60, 80 HP)

from

$842.99


Product Features:
  • Best Way To Get A Major Power Increase
  • Power Increases From 50-70 HP
  • Work With Stock ECU
  • Simple Installation
See More

Edelbrock – Performer RPM Pro-Flo 4V EFI Systems (100-150 Hp) (Part No.70070)

Performer RPM Pro-Flo 4V EFI Systems (100-150 Hp)

from

$777.99


Product Features:
  • Designed For Pro-Flo EFI Systems
  • Simple To Install
See More

Edelbrock – Performer Carb/Plate Nitrous Systems for Square-Bore Carbs (50-75-100 Hp) (Part No.70001)

Performer Carb/Plate Nitrous Systems for Square-Bore Carbs (50-75-100 Hp)

from

$724.99
The Edelbrock Performer Nitrous Plate System #70001 is designed to increase your power from 50-100 horsepower. Edelbrock Nitrous systems are simple to install with a 1/2″ thick aluminum plate that fits between the carburetor and the intake manifold. Edelb
See More

Edelbrock – Performer Carb/Plate Nitrous Systems for Spread-Bore (Q-Jet)Carbs (50-75-100 Hp) (Part No.70002)

Performer Carb/Plate Nitrous Systems for Spread-Bore (Q-Jet)Carbs (50-75-100 Hp)

from

$684.99


Product Features:
  • Designed For Carbureted V6 And V8 Engines
  • Use With Single Or Dual Plane Manifolds
  • Power Increases From 50 to 100 HP
  • Plate Systems are Easy to Install
  • Precision EDM Machined Spray Bars Maximize Flow
  • Option of Silver Powder Coated or Polished Bottle
  • Recommend Ignition Retard ; Upgraded Fuel System
  • Requires Use of Premium Fuel
See More

Edelbrock – Concealed Nitrous Kits for EFI Applications (20-30 Hp) (Part No.70028)

Concealed Nitrous Kits for EFI Applications (20-30 Hp)

from

$388.99


Product Features:
  • Easily Concealable
  • Install In Minutes
  • Quick Removal
  • No Obvious Signs Of Installation
  • No Obvious Signs Of Use
See More

Edelbrock – Universal Performer Wet to Dry Nitrous Oxide System Conversion Kit (Part No.71884)

Universal Performer Wet to Dry Nitrous Oxide System Conversion Kit

from

$266.99
Product Features:
  • Wet To Dry Conversion System
  • Hose Included
  • Includes Fittings
  • Includes Solenoid
  • Includes All Necessary Installation Items
See More

Edelbrock – Universal Performer Dry to Wet Nitrous Oxide System Conversion Kit (Part No.71883)

Universal Performer Dry to Wet Nitrous Oxide System Conversion Kit

from

$226.99
Product Features:
  • Dry To Wet Conversion System
  • Hose Included
  • Includes Fittings
  • Includes Solenoid
  • Includes All Necessary Installation Items
See More

Top Picks for 1982 Pontiac 6000 Performance Ignition Products

Upgrade Pontiac 6000s with top-quality Performance Ignition Products parts, including 5 OEM and aftermarket selections for your 1982 model.

Accel – High Energy Ignition Coil for GM HEI – 1973-1991 (Part No.140003)

High Energy Ignition Coil for GM HEI - 1973-1991

from

$100.99
Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.

Product Features:
  • 10-15% More Energy
  • Direct Plug In Replacement Direct OE Fit
  • Advanced Bobbin Technology
  • Highly Specialized Silicone Magnetic Steel Cores
  • Standard Motor Products SMP Dr-31
  • MSD 8225
See More

MSD Ignition – High Energy Ignition Coil for GM HEI Distributors (Part No.8225)

High Energy Ignition Coil for GM HEI Distributors

from

$112.99
HEI owners now have a choice to replace their stock coil with the MSD high energy unitized coil for GM HEI distributors. This coil is a direct replacement of the stock coil and offers increased spark energy when used with the MSD HEI module, PN 83645. The coil features special low induc?tance, high temperature windings which charge faster to give you increased spark energy at higher rpm. The premium epoxy filled construction is designed to withstand harsh race applications as well as the wear and tear that daily usage dishes out, and still deliver more spark energy to the spark plugs.

Product Features:
  • Direct performance replacement for GM HEI coil-in-cap dist.
  • 70:1 Turns Ratio
  • Lower Primary Resistance Produces High Voltage Output
  • Full Power Sparks To 9000 Rpm w/PN[83647] MSD HEI Module
See More

Mallory – Unilite Ignition Module (Part No.605)

Unilite Ignition Module

from

$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:
  • Service Part
  • No Moving Parts To Wear Out
  • Self Contained Unit
  • Can Drive OEM
  • Can Drive High Performance Ignition Coils
See More

Accel – High Performance Ignition Module for GM HEI Distributors (Part No.35361)

High Performance Ignition Module for GM HEI Distributors

from

$69.99
This high performance HEI module provides your plugs with more spark over the stock module. The solid state electronics provide high coil out put and superior reliability. The Dwell control circuit ensures, long consistent coil charging. The current control circuit protects against coil over heating. This module fits most GM HEI for V8 engines with the 4 pin module 1974 thru 1985

Product Features:
  • Fits Most Stock And Modified Distributors
  • Solid State Electronics
  • Dwell Control Circuit
See More

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

Promaster Classic Series; Ignition Coil

from

$186.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

Product Features:
  • Glass Filled Polyester Case
  • Longer Spark Duration
  • Increased Performance
  • No Energy Loss Due To Arcing
  • Includes Brass Contact Terminal
See More

In-Demand Performance Brakes for 1982 Pontiac 6000s

Select from 1 premium Performance Brakes parts for your 1982 Pontiac 6000.

Earls Performance Product – Brake Bleeder Screws (Part No.280029ERL)

Brake Bleeder Screws

from

$40.99
Brake Bleeder Screws

Top-Rated Performance and Racing Products Brands For Your 1982 Pontiac 6000

Shop for the best-rated brands offering Performance and Racing Products and other products for your 1982 Pontiac 6000s. Below you’ll find some of our best rated Performance and Racing Products from Mr. Gasket, Accel, and MSD Ignition, and more. Performance and Racing Products from these brands that fit a 1982 6000 start at just $26.99 and are rated as high as 4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular Mr. Gasket 1982 Pontiac 6000 Performance and Racing Products

When it comes to maintaining or upgrading your 1982 Pontiac 6000, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Mr. Gasket ticks all of those boxes. We offer a wide selection of Mr. Gasket Performance and Racing Products, specifically designed for the 1982 Pontiac 6000. With over 1 Mr. Gasket brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $26.99. Plus, with over 20 customer reviews and an average rating of 4 stars, you can trust that our Mr. Gasket Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

High Performance 180 Degree Thermostat for Increased Flow
from
$26.99

(20)

High Performance 180 Degree Thermostat for Increased Flow

“Installed in my 95 mustang perfect fit and working better than hopped or expected!!!”

Popular Accel 1982 Pontiac 6000 Performance and Racing Products

Accel auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1982 Pontiac 6000 owner should feel confident when installing genuine Accel parts in their vehicle. To ensure the best fit and performance for your 1982 6000, Advance Auto Parts carries a full inventory of 2 Accel Performance and Racing Products. Plus you will be keeping your Pontiac in peak condition while saving money because prices on these Accel Performance and Racing Products range from $69.99 to $100.99, plus, with more than 9 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

High Performance Ignition Module for GM HEI Distributors
from
$69.99

(1)

High Performance Ignition Module for GM HEI Distributors

“I purchased this product as part of a “stealth HEI” upgrade on a 1990 Jeep Wrangler, with a “Nutter Bypass” and the “Team Rush” ignition upgrade. The ”

High Energy Ignition Coil for GM HEI - 1973-1991
from
$100.99

(8)

High Energy Ignition Coil for GM HEI – 1973-1991

“GREAT ITEM WORKS WELL”

FAQs for 1982 Pontiac 6000 Performance and Racing Products

Which Performance and Racing Products are best-sellers for 1982 Pontiac 6000s?

Out of 20 Performance and Racing Products that fit 1982 Pontiac 6000s, the following parts are the top sellers:

What’s the price range for 1982 Pontiac 6000 Performance and Racing Products?

Performance and Racing Product prices for the 1982 Pontiac 6000 start at $24.49 and go up to $926.99 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 1982 Pontiac 6000?

The average price for Performance and Racing Products for the 1982 Pontiac 6000 is $316.42. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other Pontiac 6000 model years?

Yes, we currently carry Performance and Racing Products for 9 model years of Pontiac 6000s between 1983 and 1991. Performance and Racing Products are bought most frequently for the following model years: 1991, 1990, 1989, 1988, 1987, 1986, 1985, 1984, and 1983.

What are the cheapest Performance and Racing Products for my 1982 Pontiac 6000?

The cheapest 1982 Pontiac 6000 Performance and Racing Products we carry in stock are:

What are the top-rated Performance and Racing Products that fit the 1982 Pontiac 6000?

Out of 88 reviews by customers, our 1982 Pontiac 6000 Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1982 Pontiac 6000 and their top-rated products:

Can I get help with 1982 Pontiac 6000 Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Pontiac Performance and Racing Products and more.

What is your return policy for Pontiac 6000 Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new Pontiac 6000 Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.