1982 Oldsmobile Cutlass Exhaust Parts
Find Your Specific 1982 Oldsmobile Cutlass Exhaust Parts
Below you will find various in-demand Oldsmobile Exhaust Parts, components and accessories for your 1982 Cutlass. Advance Auto Parts has popular Cutlass parts like Exhaust Pipes, Exhaust Mufflers, Exhaust Manifold and Headers and more. You’ll also find aftermarket and OEM Exhaust Parts for other Cutlass model years including
1978,
1979,
1980,
1981,
1983,
1988,
1997,
1998,
1999 and more. Select a category of 1982 Oldsmobile Cutlass Exhaust Parts below and start saving instantly.
Popular 1982 Oldsmobile Cutlass Exhaust Parts Categories
Essential Exhaust Parts for 1982 Oldsmobile Cutlasses
Walker – Exhaust Tail Pipe 2" Inlet (OD) 2" Outlet (OD) (Part No.43828)
from
$38.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION – Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL – Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE – Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Flowmaster Inc. – Prebent Tailpipes – 2.50 in. Rear Exit – Pair (Part No.15802)
from
$237.99
Prebent pipe kits. Flowmaster’s 16 gauge mandrel bent pipe kits are designed to fit perfectly onto your vehicle with all the quality and performance that you would expect from Flowmaster.
See More
Flowmaster Inc. – Super 10 Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.842518)
from
$101.99
Super 10 Series 409S stainless steel – single chamber mufflers. Intended for customers who desire the loudest and most aggressive sound they can find. Because these mufflers are so aggressive, they are recommended only for off highway use and not for street driven vehicles. These mufflers utilize the same patented Delta Flow technology that is found in Flowmaster’s other Super series mufflers to deliver maximum performance. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Walker – Sound Solution Exhaust Muffler (Part No.18695)
from
$64.99
Sound Solution mufflers are engineered with 100% aluminized steel for longer service life compared to low carbon steel. These mufflers have mechanical interior joints for durability, And spun-locked heads for resistance to rupture from backfires. Sound Solution mufflers are available in a universal fitment style, with both quality appearance And favorable acoustics.
See More
Dorman – Help – Exhaust Manifold Stud Kit – 3/8-16 x 3-1/4 In. (Part No.03113)
from
$6.99
Our exhaust manifold flange kit includes all necessary studs and nuts for a complete repair.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles
- Ideal solution – this stud and nut are reliable replacements for original parts that are missing or have failed due to wear
- Durable construction – these parts are made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Walker – Exhaust System Hanger (Part No.35871)
from
$16.29
Complete your exhaust repair with Walker exhaust hangers. Designed with OE-style features to support undercar exhaust components, Walker hangers are manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- KEEPS EXHAUST PARTS IN PLACE – Designed to support undercar exhaust components
- OE DESIGN – Designed with OE-style features for easy installation
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality steel for durability and long life
- BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Pipe Flange Gasket (Part No.31523)
from
$10.79
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- HEAT RESISTANT – Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS – Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE – Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL – Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Pipe Flange Gasket (Part No.31511)
from
$12.49
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- HEAT RESISTANT – Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS – Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE – Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL – Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Clamp (Part No.35337)
from
$8.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS – Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER – Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Clamp (Part No.35336)
from
$2.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS – Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER – Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Hooker BlackHeart – Hooker BlackHeart LS Swap Exhaust System (Part No.70501363-RHKR)
from
$1407.00
Product Features:
See More
- Each system is supplied with a high-efficiency stamped crossover & high-flow TIG-welded 304 SS absorption mufflers
- OE quality hardware (clamps, hanger rods and rubber isolators) provided to ensure excellent fitment and a leak free installation
- Kits are supplied with turn-down style exits under the rear quarter panels
- Stainless steel straight through designed absorption mufflers for a muscle car sound without the resonance
- Constructed of mandrel bent stainless steel tubing
- Fits All G-Bodies Except EL Caminos – 118-inch Wheelbase
MagnaFlow – Street Series Crossmember-Back Performance Exhaust System (Part No.15893)
from
$1217.99
The MagnaFlow Street Series Crossmember-Back Performance Exhaust System 15893 brings enhanced engine sound and dyno-proven performance to your muscle car with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features a crossmember-back layout designed to replace your exhaust system from the crossmember on back. With its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Multiple Exit Options exit with 2.75in. Polished Weld-On Single Wall Turndown Cut Edge tips, your muscle car will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15893 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited construction warranty.
Product Features:
See More
Product Features:
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- Dyno-proven performance
Hooker BlackHeart – Hooker BlackHeart Adapter Kit (Part No.70701313-RHKR)
from
$309.99
Product Features:
See More
- Mandrel bent 304SS construction provides enhanced performance and appearance characteristics
- Connects Hooker LS cast iron manifolds to Hooker 2.5″ A-body exhaust systems
- O2 bungs included in each adapter tube are indexed for reliable wide-band sensor operation
- Compatible with all GM automatic transmissions
- Compatible with 4th-gen F-body T56 and T56 Magnum transmissions
- Includes OE quality clamps; requires no cutting or welding to install
Flowtech – HEADER FLT BLOCK HUGGER (Part No.10010FLT)
from
$84.99
HEADER FLT BLOCK HUGGER
Walker – Exhaust Flange (Part No.31900)
from
$11.99
Complete your exhaust repair with Walker flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- KEEPS EXHAUST PARTS IN PLACE – Designed to support undercar exhaust components
- OE-STYLE DESIGN – Designed with OE-style features for easy installation
- QUALITY MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER – Use Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Flange (Part No.31882)
from
$17.49
Complete your exhaust repair with Walker flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- KEEPS EXHAUST PARTS IN PLACE – Designed to support undercar exhaust components
- OE-STYLE DESIGN – Designed with OE-style features for easy installation
- QUALITY MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER – Use Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Flowtech – Terminator; Exhaust Tips (Part No.59905FLT)
from
$93.99Product Features:
- Show Quality Chrome Platinum
- Durable Black Finish
- Can Be Welded Or Clamped
- Complete The System
- Glass-Packed Resonators
Walker – CalCat CARB Universal Catalytic Converter – 2.25" Inlet (ID) 2.25" Outlet (ID) (Part No.82508)
from
$661.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.
Product Features:
See More
Product Features:
- CARB COMPLIANT – For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
- SUPERIOR TECHNOLOGY – Optimal high technology wash coat formulated to deliver superior performance (as compared to EPA-compliant converters)
- CONSISTENT PERFORMANCE – Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
- DURABLE – Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION – Customizable design features expandable bushings for easy fitment and may require specialized fabrication and welding for installation
- BUY WITH CONFIDENCE – Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity limited warranty
Walker – Ultra EPA Universal Catalytic Converter – 2.25" Inlet (ID) 2.25" Outlet (ID) (Part No.93252)
from
$179.99
Product Features:
See More
- EPA COMPLIANT – For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
- KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES – OE-style high-technology wash coat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
- DURABLE – Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION – Customizable design features expandable bushings for easy fitment and may require specialized fabrication and welding for installation
- OE-STYLE DESIGN – Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
- BUY WITH CONFIDENCE – Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 50,000-mile/80,000-kilometer structural integrity limited warranty. Visit Walkerexhaust.com for details.
Taylor Gaskets – Vibe Lock Header Bolt Kit (Part No.310004)
from
$89.99
Vibe Lock Header Bolt Kit
ARP Auto Racing – 0.750" L, Hex Style Head Type, Black Oxide, Black, Chrome Moly, Set Of 12 (Part No.100-1101)
from
$31.99
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.
Product Features:
See More
Product Features:
- Material Is Not Affected By Corrosion Or Extreme Heat
- The Compact 12-Point Nut Lets You Easily Slip A Socket Close To The Pipe
- Substantially Stronger Than Grade 8 Hardware
- Nominally Rated At 170,000 Psi Tensile Strength
- Set of 12
- 0.75″ Overall Length
Taylor Gaskets – Header Gasket (Part No.66088)
from
$29.99
Header Gasket
Felpro – Intake and Exhaust Manifolds Combination Gasket (Part No.MS 9786)
from
$18.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
Dorman – Direct Fit Exhaust Manifold: without Heat Shield (Part No.674-197)
from
$166.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Product Features:
See More
Product Features:
- Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
- Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance
- Complete repair – includes all necessary gaskets and downpipe hardware
- Trustworthy design – built by industry leader in aftermarket manifolds
Hooker BlackHeart – Hooker BlackHeart LT Swap Exhaust Manifolds – Stainless Steel – Polished Finish (Part No.BHS3117)
from
$956.99
Product Features:
See More
- 2.5-inch outlet diameter offers improved flow for maximum performance from a cast exhaust manifold
- Tight tuck design provides universal fit for most popular chassis and a clean traditional muscle car appearance
- Intended for GM LT engine swap applications where durability, quiet operation, and leak-free sealing is desired
- Polished finish for a standout appearance. Also available in natural cast finish.
- Nickel plated steel mating flanges, MLS mating flange gaskets, and mating flange hardware included
- Stainless Steel construction to provide unmatched durability and corrosion resistance
- Perfect complement to Hooker engine swap mount plates and Holley engine swap oil pans
Walker – Exhaust Bolt and Spring (Part No.36463)
from
$19.99
Complete your exhaust repair with a Walker spring bolt kit. Designed to ensure a tight connection and inhibit leaks, Walker hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- KEEPS EXHAUST PARTS IN PLACE – Designed to support undercar exhaust components
- CONSISTENT PERFORMANCE – Spring designed with the right compression strength for a secure connection
- PREMIUM MATERIALS – Made from high-quality materials for durability and long life
- THE RIGHT CONNECTION – Designed to be used for ball and socket joint
- BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Upgrade your 1982 Oldsmobile Cutlass with Top-Quality Exhaust Parts
When it comes to maintaining or upgrading your 1982 Oldsmobile Cutlass, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Oldsmobile or enhancing its overall performance, Exhaust Parts are key to keeping your Cutlass functioning at its best. At Advance Auto Parts, we offer a wide selection of 68 Exhaust Parts for the 1982 Oldsmobile Cutlass, designed to meet your needs without breaking the bank.
From
Exhaust Pipe
replacements to
Exhaust Mufflers
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Exhaust Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Exhaust Parts for your 1982 Oldsmobile Cutlass at great prices.
Our Exhaust Parts inventory for this model
ranges from just $2.99 to $1,407.00, with
an average price of $340.02.
Our 68 Exhaust Parts in stock come from 13 trusted brands, so you’re sure to find the right part for your 1982 Oldsmobile Cutlass without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1982 Oldsmobile Cutlass, we stock popular OEM and aftermarket Exhaust Parts from top names
like Felpro, Walker, Dorman, and more.
Felpro Exhaust Parts
start at just $12.79 and boast an impressive 4.6 stars average rating from customers.
Walker and Dorman also bring quality to the table, with Exhaust Parts available starting at $11.99, and at an average 4.2 stars rating.
With 160 customer reviews and counting, our 1982 Oldsmobile Cutlass Exhaust Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Exhaust Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1982 Oldsmobile Cutlass is always ready to roll. We’re committed to providing you with everything you need to keep your Cutlass in top shape, all in one place.
Start shopping confidently below for your 1982 Oldsmobile Cutlass!
Best-Selling Exhaust Pipes for 1982 Oldsmobile Cutlasses
Enhance the driving experience in your Oldsmobile with 3 quality Exhaust Pipe components, starting at $38.49.
Walker – Exhaust Tail Pipe 2" Inlet (OD) 2" Outlet (OD) (Part No.43828)
from
$38.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION – Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL – Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE – Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Flowtech – HEADER FLT BLOCK HUGGER (Part No.10010FLT)
from
$84.99
HEADER FLT BLOCK HUGGER
Walker – Exhaust Tail Pipe 2" Inlet (OD) 2" Outlet (OD) (Part No.43770)
from
$38.49
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION – Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL – Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE – Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Most Popular 1982 Oldsmobile Cutlass Exhaust Mufflers
Customize your Oldsmobile with 9 Exhaust Mufflers products
like Mufflers, all
priced under $173.99.
Flowmaster Inc. – 40 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.42443)
from
$101.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Walker – Sound Solution Exhaust Muffler (Part No.18601)
from
$58.99
Sound Solution mufflers are engineered with 100% aluminized steel for longer service life compared to low carbon steel. These mufflers have mechanical interior joints for durability, And spun-locked heads for resistance to rupture from backfires. Sound Solution mufflers are available in a universal fitment style, with both quality appearance And favorable acoustics.
Product Features:
See More
Product Features:
- Aluminized steel construction for corrosion resistance and durability
- Mechanical interior joints for durability
- Spun-locked heads for rupture resistance
- Tube-and-partition style interior design
- Universal mufflers may require modifications to complete installation
- Spot welded bushings provide stability and system support
- Some mufflers available with reinforced bracketed heads
Walker – Sound Solution Exhaust Muffler (Part No.18607)
from
$63.99
Sound Solution mufflers are engineered with 100% aluminized steel for longer service life compared to low carbon steel. These mufflers have mechanical interior joints for durability, And spun-locked heads for resistance to rupture from backfires. Sound Solution mufflers are available in a universal fitment style, with both quality appearance And favorable acoustics.
See More
Flowmaster Inc. – 50 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound (Part No.942453)
from
$173.99
The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Walker – SoundFX Universal Exhaust Muffler 2" Inlet (ID) 2" Outlet (ID) (Part No.18101)
from
$78.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX universal mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION : Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST : Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- FLEXIBLE SOLUTION : Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
- FACTORY SOUND : Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER : Designed and tested to extend muffler life
Walker – SoundFX Direct Fit Exhaust Muffler 2.25" Inlet (ID) 2" Outlet (ID) (Part No.18345)
from
$71.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION – Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST – Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- EASY TO INSTALL – Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and welding
- FACTORY SOUND – Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER – Designed and tested to extend muffler life
Flowmaster Inc. – Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.842448)
from
$139.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler we’ve ever built in a four inch case. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Walker – SoundFX Direct Fit Exhaust Muffler 2" Inlet (ID) 2" Outlet (ID) (Part No.18275)
from
$71.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION – Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST – Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- EASY TO INSTALL – Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and welding
- FACTORY SOUND – Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER – Designed and tested to extend muffler life
Walker – SoundFX Universal Exhaust Muffler 2.25" Inlet (ID) 2" Outlet (ID) (Part No.18107)
from
$139.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX universal mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION : Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST : Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- FLEXIBLE SOLUTION : Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
- FACTORY SOUND : Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER : Designed and tested to extend muffler life
Top Picks for 1982 Oldsmobile Cutlass Exhaust Manifold and Headers
Upgrade Oldsmobile Cutlasses with top-quality Exhaust Manifold and Headers parts, including 30 OEM and aftermarket selections for your 1982 model.
Dorman – Help – Exhaust Manifold Hardware Kit – 3/8-16 In. (Part No.03401)
from
$11.99
Our Exhaust Stud and Nut provides you with the proper stud and nut for repairing or installing your manifold. Save time and energy by having the right hardware on hand when you need it.
Product Features:
See More
Product Features:
- Direct replacement – this engine manifold stud and nut match the fit and function of the original stud and nut on specified years, makes and models
- Ideal solution – replaces missing or damaged hardware to ensure a thorough manifold installation or repair
- Durable construction – made of quality materials for reliable service life
- Quality assured – backed by a team of product engineers based in the United States
Walker – Catalytic Converter Air Tube (Part No.35574)
from
$87.99
Complete your exhaust repair with a Walker air intake tubing. Designed to work seamlessly with OE and Walker rubber intake parts, Walker hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CUSTOMIZABLE FIT – Universal fit for installation flexibility
- COMPATIBILITY – Features OD-OD sized ends designed to work seamlessly with OE and Walker rubber intake parts
- QUALITY MATERIALS – Made from aluminum for durability and long life
- Designed to work seamlessly with OE and Walker aftermarket replacement parts
- New Walker accessories help to ensure effective exhaust repairs
Flowtech – Standard Header with Enhanced Fuel Efficiency and Leakproof Technology (Part No.11108FLT)
from
$234.99Product Features:
- Fuel Economy From The Engine
- Leak Test For Max Performance
- Mandrel-Formed Power Plenum
- Leakproof O-Ringed Port Seals
- Include All Mounting Hardware
Flowtech – Ceramic Header (Part No.31108FLT)
from
$511.99Product Features:
- Fuel Economy From The Engine
- Leak Test For Max Performance
- Ceramic Headers
- Rust And Corrosion Resistance
- Mandrel-Formed Power Plenum
- Leakproof O-Ringed Port Seals
- Include All Mounting Hardware
Hooker Headers – High-Performance Small Block Chevy Long Tube Headers (Part No.2451HKR)
from
$316.99
Small block Chevy 350 applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- High Performance
- Affordable
- Durable 16 Gauge Material
- Welds Easier
- Lasts Longer
- Heat Cured
- High Heat Resistant
Hooker Headers – Competition Header (Part No.2451-1HKR)
from
$655.99
LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- High Performance
- Affordable
- Durable 16 Gauge Material
- Welds Easier
- Lasts Longer
- Heat Cured
- High Heat Resistant
Dorman – Exhaust Flange Hardware – 4 Bolts and 2 Studs – 3/8-16 (Part No.675-217)
from
$19.29
This engine manifold stud and nut match the fit and function of the original hardware on specific makes and models. Ensure a thorough manifold repair or installation with this durable and reliable hardware.
Product Features:
See More
Product Features:
- Direct replacement – this engine manifold stud and nut match the fit and function of the original stud and nut on specified years, makes and models
- Ideal solution – replaces missing or damaged hardware to ensure a thorough manifold installation or repair
- Durable construction – made of quality materials for reliable service life
- Quality assured – backed by a team of product engineers based in the United States
ARP Auto Racing – For Use With Chevy Small Block, 3/8"-16, 1"L, Hex Head, Natural, Ss, Set Of 12 (Part No.400-1111)
from
$51.99
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.
Product Features:
See More
Product Features:
- Material Is Not Affected By Corrosion Or Extreme Heat
- The Compact 12-Point Nut Lets You Easily Slip A Socket Close To The Pipe
- Substantially Stronger Than Grade 8 Hardware
- Nominally Rated At 170,000 Psi Tensile Strength
- 3/8″-16 Thread Size
- 1″ Underhead Length
ARP Auto Racing – For Use With Chevy Small Block, 3/8 – 16" Thread Size, .75" L, Natural, Set Of 12 (Part No.400-1201)
from
$33.99
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.
Product Features:
See More
Product Features:
- Material Is Not Affected By Corrosion Or Extreme Heat
- The Compact 12-Point Nut Lets You Easily Slip A Socket Close To The Pipe
- Substantially Stronger Than Grade 8 Hardware
- Nominally Rated At 170,000 Psi Tensile Strength
- 3/8″-16 Thread Size
- 1″ Underhead Length
Felpro – Exhaust Manifold Hardware Kit (Part No.ES 75111)
from
$29.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Designed and manufactured to meet the needs of the exhaust system repair environment.
- Verified, tested and certified proprietary Organic coating resists corrosion.
- Tightly controlled coefficient of friction ensures reliable installation.
- Application specific kit contents
- Self-locking nuts (where applicable).
ARP Auto Racing – 0.750" L, Hex Style Head Type, Black Oxide, Black, Chrome Moly, Set Of 12 (Part No.100-1101)
from
$31.99
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.
Product Features:
See More
Product Features:
- Material Is Not Affected By Corrosion Or Extreme Heat
- The Compact 12-Point Nut Lets You Easily Slip A Socket Close To The Pipe
- Substantially Stronger Than Grade 8 Hardware
- Nominally Rated At 170,000 Psi Tensile Strength
- Set of 12
- 0.75″ Overall Length
Hooker BlackHeart – Hooker BlackHeart LT Swap Exhaust Manifolds – Stainless Steel – Polished Finish (Part No.BHS3117)
from
$956.99
Product Features:
See More
- 2.5-inch outlet diameter offers improved flow for maximum performance from a cast exhaust manifold
- Tight tuck design provides universal fit for most popular chassis and a clean traditional muscle car appearance
- Intended for GM LT engine swap applications where durability, quiet operation, and leak-free sealing is desired
- Polished finish for a standout appearance. Also available in natural cast finish.
- Nickel plated steel mating flanges, MLS mating flange gaskets, and mating flange hardware included
- Stainless Steel construction to provide unmatched durability and corrosion resistance
- Perfect complement to Hooker engine swap mount plates and Holley engine swap oil pans
Hooker Headers – Competition Header (Part No.2451-2HKR)
from
$921.99
LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- High Performance
- Affordable
- Durable 16 Gauge Material
- Welds Easier
- Lasts Longer
- Heat Cured
- High Heat Resistant
Hooker BlackHeart – Hooker BlackHeart LS Swap Exhaust Manifolds – Stainless Steel – Polished Finish (Part No.8503-1HKR)
from
$899.99
Product Features:
See More
- 2.5 inch outlet diameter offers improved flow for maximum performance from a cast exhaust manifold
- Tight tuck design provides universal fit for most popular chassis and a clean traditional muscle car appearance
- Intended for GM LS engine swap applications where durability, quiet operation, and leak-free sealing is desired
- Polished finish, but also available in natural cast finish for a factory appearance
- Nickel plated steel mating flanges, MLS mating flange gaskets, and mating flange hardware included
- Stainless Steel construction to provide unmatched durability and corrosion resistance
- Perfect complement to Hooker engine swap mount plates and Holley engine swap oil pans
Hooker Headers – Competition Header (Part No.2466-1HKR)
from
$767.99
LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- High Performance
- Affordable
- Durable 16 Gauge Material
- Welds Easier
- Lasts Longer
- Heat Cured
- High Heat Resistant
Hooker BlackHeart – Hooker BlackHeart LS Swap Exhaust Manifolds – Black Ceramic Finish (Part No.8502-3HKR)
from
$742.99
Product Features:
See More
- Intended for GM LS engine swap applications where durability, quiet operation, and leak-free sealing is desired
- Black ceramic coating for reduced engine compartment temps and improved corrosion resistance
- Nickel plated steel mating flanges, MLS mating flange gaskets, and mating flange hardware included
- Cast from Hi-Silicon-Moly Ductile Iron to provide durability and corrosion resistance
- 2.5 inch outlet diameter offers improved flow for maximum performance from a cast iron exhaust manifold
- Tight tuck design provides universal fit for most popular chassis and a clean traditional muscle car appearance
- Perfect complement to Hooker engine swap mount plates and Holley engine swap oil pans
Hooker BlackHeart – Hooker BlackHeart LT Swap Exhaust Manifolds, Stainless Steel, Natural Cast (Part No.BHS3116)
from
$731.99
Product Features:
See More
- 2.5-inch outlet diameter offers improved flow for maximum performance from a cast exhaust manifold
- Tight tuck design provides universal fit for most popular chassis and a clean traditional muscle car appearance
- Intended for GM LT engine swap applications where durability, quiet operation, and leak-free sealing is desired
- Plain as-cast finish for a factory appearance. Also available in polished.
- Nickel plated steel mating flanges, MLS mating flange gaskets, and mating flange hardware included
- Stainless Steel construction to provide unmatched durability and corrosion resistance
- Perfect complement to Hooker engine swap mount plates and Holley engine swap oil pans
Hooker Headers – ExhstHdr (Part No.2301HKR)
from
$716.99
ExhstHdr
Hooker BlackHeart – Hooker BlackHeart LT Swap Exhaust Manifolds – Silver Ceramic Finish (Part No.BHS517)
from
$674.99
Product Features:
See More
- 2.5 inch outlet diameter offers improved flow for maximum performance from a cast iron exhaust manifold
- Tight tuck design provides universal fit for most popular chassis and a clean traditional muscle car appearance
- Intended for GM LT engine swap applications where durability, quiet operation, and leak-free sealing is desired
- Available in plain as-cast finish or with black or silver ceramic coatings for reduced engine compartment temps and improved corrosion resistance
- Nickel plated steel mating flanges, MLS mating flange gaskets, and mating flange hardware included
- Cast from Hi-Silicon-Moly Ductile Iron to provide durability and corrosion resistance
- Perfect complement to Hooker engine swap mount plates and Holley engine swap oil pans
- Patent Pending Design
Hooker BlackHeart – Hooker BlackHeart LS Swap Exhaust Manifolds – Stainless Steel – Natural Cast (Part No.8503HKR)
from
$674.99
Product Features:
See More
- 2.5-inch outlet diameter offers improved flow for maximum performance from a cast exhaust manifold
- Tight tuck design provides universal fit for most popular chassis and a clean traditional muscle car appearance
- Intended for GM LS engine swap applications where durability, quiet operation, and leak-free sealing is desired
- Plain as-cast finish for a factory appearance. Also available in polished.
- Nickel plated steel mating flanges, MLS mating flange gaskets, and mating flange hardware included
- Stainless Steel construction to provide unmatched durability and corrosion resistance
- Perfect complement to Hooker engine swap mount plates and Holley engine swap oil pans
Hooker BlackHeart – Hooker BlackHeart LT Swap Exhaust Manifolds – Black Ceramic Finish (Part No.BHS518)
from
$596.99
Product Features:
See More
- 2.5 inch outlet diameter offers improved flow for maximum performance from a cast iron exhaust manifold
- Tight tuck design provides universal fit for most popular chassis and a clean traditional muscle car appearance
- Intended for GM LT engine swap applications where durability, quiet operation, and leak-free sealing is desired
- Available in plain as-cast finish or with black or silver ceramic coatings for reduced engine compartment temps and improved corrosion resistance
- Nickel plated steel mating flanges, MLS mating flange gaskets, and mating flange hardware included
- Cast from Hi-Silicon-Moly Ductile Iron to provide durability and corrosion resistance
- Perfect complement to Hooker engine swap mount plates and Holley engine swap oil pans
- Patent Pending Design
Flowtech – Flowtech LS Swap Exhaust Manifolds – Silver Ceramic Finish (Part No.31730-1FLT)
from
$497.99
Product Features:
See More
- Intended for GM LS engine swap applications where durability and leak-free sealing is desired at a budget-oriented price
- Nickel plated steel mating flanges included (mating flange fasteners are not included)
- 2.25 inch outlet diameter offers improved flow for maximum performance from a cast iron exhaust manifold
- 2 bolt exit flange configuration matches the E-rod exhaust manifolds for a factory like fitment. This allows the use of factory gaskets and fasteners if desired, for an OE quality seal and fitment to emissions devices
- Cast from Hi-Silicon-Moly Ductile Iron to provide durability and corrosion resistance
- Tight tuck design provides universal fit for most popular chassis and a clean traditional muscle car appearance
- Available in plain as-cast finish or with black or silver ceramic coatings for reduced engine compartment temps and improved corrosion resistance
Hooker BlackHeart – Hooker BlackHeart LT Swap Exhaust Manifolds – Natural Cast Finish (Part No.BHS516)
from
$469.99
Product Features:
See More
- 2.5 inch outlet diameter offers improved flow for maximum performance from a cast iron exhaust manifold
- Tight tuck design provides universal fit for most popular chassis and a clean traditional muscle car appearance
- Intended for GM LT engine swap applications where durability, quiet operation, and leak-free sealing is desired
- Available in plain as-cast finish or with black or silver ceramic coatings for reduced engine compartment temps and improved corrosion resistance
- Nickel plated steel mating flanges, MLS mating flange gaskets, and mating flange hardware included
- Cast from Hi-Silicon-Moly Ductile Iron to provide durability and corrosion resistance
- Perfect complement to Hooker engine swap mount plates and Holley engine swap oil pans
- Patent Pending Design
Flowtech – Flowtech LS Swap Exhaust Manifolds – Black Ceramic Finish (Part No.31730-3FLT)
from
$404.99
Product Features:
See More
- Intended for GM LS engine swap applications where durability and leak-free sealing is desired at a budget-oriented price
- Nickel plated steel mating flanges included (mating flange fasteners are not included)
- 2.25 inch outlet diameter offers improved flow for maximum performance from a cast iron exhaust manifold
- 2 bolt exit flange configuration matches the E-rod exhaust manifolds for a factory like fitment. This allows the use of factory gaskets and fasteners if desired, for an OE quality seal and fitment to emissions devices
- Cast from Hi-Silicon-Moly Ductile Iron to provide durability and corrosion resistance
- Tight tuck design provides universal fit for most popular chassis and a clean traditional muscle car appearance
- Available in plain as-cast finish or with black or silver ceramic coatings for reduced engine compartment temps and improved corrosion resistance
In-Demand Exhaust Fittings for 1982 Oldsmobile Cutlasses
Select from 4 premium Exhaust Fittings parts for your 1982 Oldsmobile Cutlass, with prices ranging from $2.99 to $17.49.
Walker – Exhaust Flange (Part No.31882)
from
$17.49
Complete your exhaust repair with Walker flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- KEEPS EXHAUST PARTS IN PLACE – Designed to support undercar exhaust components
- OE-STYLE DESIGN – Designed with OE-style features for easy installation
- QUALITY MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER – Use Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Flange (Part No.31900)
from
$11.99
Complete your exhaust repair with Walker flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- KEEPS EXHAUST PARTS IN PLACE – Designed to support undercar exhaust components
- OE-STYLE DESIGN – Designed with OE-style features for easy installation
- QUALITY MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER – Use Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Clamp (Part No.35336)
from
$2.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS – Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER – Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Clamp (Part No.35335)
from
$2.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS – Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER – Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Most Sold 1982 Oldsmobile Cutlass Exhaust Hangers
Explore our best-selling Oldsmobile parts for the 1982 Cutlass among 1 OEM and aftermarket options starting from $7.99.
Dorman – Help – Exhaust Flange Spring (Part No.03084)
from
$7.99
Designed for an exact fit, our Exhaust Spring provides you with the proper flange spring for replacing the manifold. Save time and energy by having the right hardware on hand when you need it.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust spring matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this spring is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Top-Rated Exhaust Parts Brands For Your 1982 Oldsmobile Cutlass
Shop for the best-rated brands offering Exhaust Parts and other products for your 1982 Oldsmobile Cutlasses. Below you’ll find some of our best rated Exhaust Parts from Felpro, Walker, and Dorman, and more. Exhaust Parts from these brands that fit a 1982 Cutlass start at just $11.99 and are rated as high as 4.6 stars. OEM and aftermarket Exhaust Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular Felpro 1982 Oldsmobile Cutlass Exhaust Parts
When it comes to maintaining or upgrading your 1982 Oldsmobile Cutlass, using quality Exhaust Parts is essential to ensure durability and a perfect fit. Felpro ticks all of those boxes. We offer a wide selection of Felpro Exhaust Parts, specifically designed for the 1982 Oldsmobile Cutlass. With over 2 Felpro brand Exhaust Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $12.79, with an average price of just $16.89. Plus, with over 22 customer reviews and an average rating of 4.6 stars, you can trust that our Felpro Exhaust Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$20.99
(21)
Exhaust Manifold Gasket Set
“Easy to install with slots for manifold bolts , just slide them in”
Popular Walker 1982 Oldsmobile Cutlass Exhaust Parts
Walker auto parts is one of the highest quality Exhaust Part brands in the market. Any 1982 Oldsmobile Cutlass owner should feel confident when installing genuine Walker parts in their vehicle. To ensure the best fit and performance for your 1982 Cutlass, Advance Auto Parts carries a full inventory of 3 Walker Exhaust Parts. Plus you will be keeping your Oldsmobile in peak condition while saving money because prices on these Walker Exhaust Parts range from $19.99 to $87.99, plus, with more than 23 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Exhaust Parts below will deliver on both quality and value.
FAQs for 1982 Oldsmobile Cutlass Exhaust Parts
Which Exhaust Parts are best-sellers for 1982 Oldsmobile Cutlasses?
Out of 68 Exhaust Parts that fit 1982 Oldsmobile Cutlasses, the following parts are the top sellers:
- Exhaust Manifold Gasket Set (5184266) – $20.99
- Exhaust Bolt and Spring (10044670) – $19.99
- Aluminum Exhaust Gaskets for Intense Heat Resistance (6900015) – $49.99
What’s the price range for 1982 Oldsmobile Cutlass Exhaust Parts?
Exhaust Part prices for the 1982 Oldsmobile Cutlass start at $2.99 and go up to $1,407.00 for the most premium parts.
What’s the average price of a Exhaust Part for a 1982 Oldsmobile Cutlass?
The average price for Exhaust Parts for the 1982 Oldsmobile Cutlass is $340.02. Keep in mind the variety of part types within our Exhaust Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Exhaust Parts for other Oldsmobile Cutlass model years?
What are the cheapest Exhaust Parts for my 1982 Oldsmobile Cutlass?
The cheapest 1982 Oldsmobile Cutlass Exhaust Parts we carry in stock are:
- Exhaust Clamp (11012137) – $2.99
- Exhaust Clamp (11012223) – $2.99
- Exhaust Flange Spring (9110160) – $7.99
- Exhaust Manifold Hardware Kit – 3/8-16 In. (9110135) – $11.99
- Exhaust Flange (5600995) – $11.99
What are the top-rated Exhaust Parts that fit the 1982 Oldsmobile Cutlass?
Out of 160 reviews by customers, our 1982 Oldsmobile Cutlass Exhaust Parts have an average customer rating of . These are some of the highest-rated Exhaust Part types for the 1982 Oldsmobile Cutlass and their top-rated products:
- Exhaust Fittings
- Exhaust Flange (5600952) – $17.49
- Exhaust Tips
- Exhaust Flange (5600952) – $17.49
- Exhaust Gaskets
- Exhaust Flange (5600952) – $17.49
What types of Exhaust Parts do you sell for my 1982 Oldsmobile Cutlass?
As of 3/1/26, these are some of the most in-demand types of Exhaust Parts for a 1982 Oldsmobile Cutlass:
Can I get help with 1982 Oldsmobile Cutlass Exhaust Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Oldsmobile Exhaust Parts and more.
What is your return policy for Oldsmobile Cutlass Exhaust Parts?
Advance Auto Parts keeps returns simple. For new Oldsmobile Cutlass Exhaust Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
