1982 Jeep Wagoneer Clutch Systems
Find Your Specific 1982 Jeep Wagoneer Clutch Systems
Below you will find various in-demand Jeep Clutch Systems, components and accessories for your 1982 Wagoneer. Advance Auto Parts has popular Wagoneer parts like Clutch Forks, Flywheels, Clutch Kits and more. You’ll also find aftermarket and OEM Clutch Systems for other Wagoneer model years including
1981,
1983,
1984,
1985,
1986,
1987,
1988,
1989,
1990 and more. Select a category of 1982 Jeep Wagoneer Clutch Systems below and start saving instantly.
Popular 1982 Jeep Wagoneer Clutch Systems Categories
Essential Clutch Systems for 1982 Jeep Wagoneers
LuK – Rigid Flywheel (Part No.LFW194)
from
$104.99
LuK rigid flywheels, a smart alternative to resurfacing,¿offer a smooth, flat surface crucial for proper clutch operation, are engineered and manufactured to OE specifications, and are dynamically balanced to eliminate vibration and increase clutch performance
Product Features:
See More
Product Features:
- Every component, including the ring gear, is engineered and manufactured to Original Equipment (OE) specifications.
- LuK flywheels are always new and never remanufactured.
- LuK solid flywheels are dynamically balanced to eliminate vibration and increase clutch performance.
- LuK’s engineering and quality materials contribute to a longer service life for the flywheel and clutch system.
- Pairing your clutch set with a new LuK flywheel is a smart, cost-effective alternative to resurfacing.
ATP – Automatic Transmission Flex Plate (Part No.Z-205)
from
$107.99
Vehicles with automatic transmissions have a flex plate. The flex plates connect the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious and expensive damage. Broken flex plates cannot be repaired, they must be replaced. Pioneer Flex Plates are made of high-quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability.
Product Features:
See More
Product Features:
- Balanced to factory specs
- Fit and function like the original parts
- Restores normal operation
Crown Auto Jeep Replacmnt – Bellcrank, Black, Rubber, Set Of 2 (Part No.3167067K)
from
$14.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Easy Installation
Crown Auto Jeep Replacmnt – Clutch Pilot Bearing: Press In Style, Round Nose, Self Aligning (Part No.J3236726)
from
$8.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Manufactured From High Quality Material
- Engineered To The Specifications
- Meets The Quality Standards
- Designed For Performance And Durability
- Easy To Install
Dorman – Clutch Pilot Bushing .756 In. x 1.056 In. Type A, Length .877 In. (sold by each) (Part No.690-042)
from
$5.49
This clutch pilot bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch pilot bushing matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Flywheel Bolts – Thread Size 7/16-20; Thread Length 0.900 In. (Sold by each) (Part No.678-154)
from
$4.49
This clutch flywheel bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch flywheel bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and Length service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
- Thread Size: 7/16-20
- Tread Length: 0.900 in.
- SAE
- PLEASE NOTE: Item priced and sold by each. See store for details.
Dorman – Help – Flywheel Bolts (Part No.14557)
from
$11.49
This clutch flywheel bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch flywheel bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Crown Auto Jeep Replacmnt – Chrysler, Oem Replacement, Single (Part No.33004041)
from
$9.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Manufactured From High Quality Material
- Engineered To The Specifications
- Meets The Quality Standards
- Designed For Performance And Durability
- Easy To Install
Dorman – Clutch Pilot Bearing .596 In. x .829 In. Type E, Length .586 In. (Sold by each) (Part No.690-044)
from
$4.49
This clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles
- Ideal solution – this bearing is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
ATP – ATP Manual Transmission Flywheel Ring Gear (Part No.ZA-509)
from
$34.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. Pioneer ring gears are designed to fit and function just like the original part to ensure durability and long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- Eliminates grinding from damaged teeth
- Increases starter drive life
ATP – Clutch Fork (Part No.ZA-107)
from
$27.99
Manual clutch system uses a clutch fork to help engage and disengage the clutch. It is the clutch fork that disengages the transmission while changing gears. Over time the clutch fork can crack or bend. The best repair is replacing the old clutch fork with a new one. Pioneer clutch forks are designed to fit and function just like the original part, returns clutch feel to normal and proper clutch engagement.
See More
ATP – Flywheel Shim (Part No.TS-4)
from
$24.49
ATP Flywheel Shims install easily restoring machined manual transmission flywheels back to the proper height. On automatic transmissions the shim takes up excessive clearance caused by engine crankshaft endplay or by installing a rebuilt torque converter or rebuilt front pump.
See More
ATP – Flywheel Shim (Part No.TS-5)
from
$29.99
ATP Flywheel Shims install easily restoring machined manual transmission flywheels back to the proper height. On automatic transmissions the shim takes up excessive clearance caused by engine crankshaft endplay or by installing a rebuilt torque converter or rebuilt front pump.
See More
Crown Auto Jeep Replacmnt – OE Replacement, Single (Part No.J3169769)
from
$1.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Manufactured From High Quality Material
- Engineered To The Specifications
- Meets The Quality Standards
- Designed For Performance And Durability
- Easy To Install
Richmond Gear – Differential Pinion Shaft (Part No.CSPD44)
from
$26.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND.
Product Features:
See More
Product Features:
- For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond.
- The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
- Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
- Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by limited warranty.
- Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
LuK – Clutch Kit: 10 3/8" Disc Diameter, 1 1/8" Input Shaft Diameter, 10 Tooth Spline (Part No.01-035)
from
$249.99
LuK: The brand professionals trust. For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet clutch components. Each set contains everything you need to get the job done right. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Enjoy a light, comfortable pedal that stays consistent over the clutch’s life.
- Find the perfect LuK clutch engineered for your specific car or light commercial vehicle.
- Kits include everything needed for a quick, correct fit and reliable clutch performance.
LuK – Clutch Kit: 10 3/8" Disc Diameter, 1 1/8" Input Shaft Diameter, 10 Tooth Spline (Part No.01-034)
from
$268.99
LuK: The brand professionals trust. For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet clutch components. Each set contains everything you need to get the job done right. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Enjoy a light, comfortable pedal that stays consistent over the clutch’s life.
- Find the perfect LuK clutch engineered for your specific car or light commercial vehicle.
- Kits include everything needed for a quick, correct fit and reliable clutch performance.
Hays – Clutch 55-85 Gm 6-8Cyl:11In:10Sp (Part No.92-1004)
from
$1075.99
Hays Street 650 single disc kits are designed to handle highly modified engines up to 650 naturally aspirated horsepower (600HP for forced induction & nitrous combinations). Designed as a true Street/Strip clutch for spirited high-performance driving or frequent track use. The high-performance disc utilized in the Street 650 has an 8-spring hub with encapsulated damper springs and a sintered metallic friction surface. The encapsulated spring can handle 3 times the shock load versus a standard coil spring. Sintered metallic material provides a degree of slippage on vehicle launches to prevent violent engagement characteristics found in paddle-style metallic discs. Each kit includes a pressure plate, clutch disc, throwout bearing, alignment tool, and instructions.
Product Features:
See More
Product Features:
- Designed for power levels up to 650 naturally aspirated horsepower (600 HP for forced induction/nitrous)
- True “Street/Strip” clutch kit for spirited street driving and frequent track use
- Pressure plate offers 30% more clamping force than stock
- Sintered metallic disc friction surface used for smoother engagement during vehicle launch
- Upgraded 8-spring hub with polyurethane encapsulated damper springs handles 3 times the shock load over standard disc springs
- All Street 650 clutch kits come complete with pressure plate, disc, throw-out bearing, and alignment tool
- Available for GM, Ford, AMC, Jeep and Chrysler
LuK – Clutch Kit: 10 3/8" Disc Diameter, 1 1/8" Input Shaft Diameter, 10 Tooth Spline (Part No.01-017)
from
$165.99
LuK: The brand professionals trust. For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet clutch components. Each set contains everything you need to get the job done right. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Enjoy a light, comfortable pedal that stays consistent over the clutch’s life.
- Find the perfect LuK clutch engineered for your specific car or light commercial vehicle.
- Kits include everything needed for a quick, correct fit and reliable clutch performance.
National – Clutch Release Bearing (Part No.614115)
from
$61.99
Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.
Product Features:
See More
Product Features:
- BUILT TO LAST – Advanced heat treatment process for strength
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE – Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Hays – Power Train (Part No.70-230)
from
$112.99
Hays high-performance throwout bearings have been developed to withstand the high-spring pressure and high RPM operation common to racing clutches. Each bearing face is heat-treated and Blanchard-ground to ensure trueness. The collars are heat-treated for strength and machined to close tolerances for secure bearing fork attachment. The ball-bearing race is packed with heat-resistant moly-based grease for better lubrication and longer life. A nylon liner and bearing retainer are also featured for cooler and quieter operation.
See More
Crown Auto Jeep Replacmnt – OE Replacement, Single Inner (Part No.J3167049)
from
$2.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Manufactured From High Quality Material
- Engineered To The Specifications
- Meets The Quality Standards
- Designed For Performance And Durability
- Easy To Install
Upgrade your 1982 Jeep Wagoneer with Top-Quality Clutch Systems
When it comes to maintaining or upgrading your 1982 Jeep Wagoneer, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jeep or enhancing its overall performance, Clutch Systems are key to keeping your Wagoneer functioning at its best. At Advance Auto Parts, we offer a wide selection of 20 Clutch Systems for the 1982 Jeep Wagoneer, designed to meet your needs without breaking the bank.
From
Clutch Fork
replacements to
Flywheels
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Clutch Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Clutch Systems for your 1982 Jeep Wagoneer at great prices.
Our Clutch Systems inventory for this model
ranges from just $1.99 to $179.99, with
an average price of $39.79.
Our 20 Clutch Systems in stock come from 8 trusted brands, so you’re sure to find the right part for your 1982 Jeep Wagoneer without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1982 Jeep Wagoneer, we stock popular OEM and aftermarket Clutch Systems from top names
like Dorman, and more.
Dorman Clutch Systems
start at just $11.49 and boast an impressive 4.2 stars average rating from customers.
With 5 customer reviews and counting, our 1982 Jeep Wagoneer Clutch Systems have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Clutch System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1982 Jeep Wagoneer is always ready to roll. We’re committed to providing you with everything you need to keep your Wagoneer in top shape, all in one place.
Start shopping confidently below for your 1982 Jeep Wagoneer!
Best-Selling Clutch Forks for 1982 Jeep Wagoneers
Enhance the driving experience in your Jeep with 2 quality Clutch Fork components, starting at $14.99.
Crown Auto Jeep Replacmnt – Bellcrank, Black, Rubber, Set Of 2 (Part No.3167067K)
from
$14.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Easy Installation
ATP – Clutch Fork (Part No.ZA-107)
from
$27.99
Manual clutch system uses a clutch fork to help engage and disengage the clutch. It is the clutch fork that disengages the transmission while changing gears. Over time the clutch fork can crack or bend. The best repair is replacing the old clutch fork with a new one. Pioneer clutch forks are designed to fit and function just like the original part, returns clutch feel to normal and proper clutch engagement.
See More
Most Popular 1982 Jeep Wagoneer Flywheels
Customize your Jeep with 8 Flywheels products
like Flywheels and Flexplates,
Flywheel Bolts, and
Flywheel Ring Gears, all
priced under $124.99.
Dorman – Help – Flywheel Bolts (Part No.14557)
from
$11.49
This clutch flywheel bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch flywheel bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
ATP – Automatic Transmission Flex Plate (Part No.Z-101)
from
$48.49
Vehicles with automatic transmissions have a flex plate. The flex plates connect the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious and expensive damage. Broken flex plates cannot be repaired, they must be replaced. Pioneer Flex Plates are made of high-quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability.
Product Features:
See More
Product Features:
- Balanced to factory specs
- Fit and function like the original parts
- Restores normal operation
ATP – ATP Manual Transmission Flywheel Ring Gear (Part No.ZA-509)
from
$34.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. Pioneer ring gears are designed to fit and function just like the original part to ensure durability and long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- Eliminates grinding from damaged teeth
- Increases starter drive life
LuK – Rigid Flywheel (Part No.LFW192)
from
$124.99
LuK rigid flywheels, a smart alternative to resurfacing,¿offer a smooth, flat surface crucial for proper clutch operation, are engineered and manufactured to OE specifications, and are dynamically balanced to eliminate vibration and increase clutch performance
Product Features:
See More
Product Features:
- Every component, including the ring gear, is engineered and manufactured to Original Equipment (OE) specifications.
- LuK flywheels are always new and never remanufactured.
- LuK solid flywheels are dynamically balanced to eliminate vibration and increase clutch performance.
- LuK’s engineering and quality materials contribute to a longer service life for the flywheel and clutch system.
- Pairing your clutch set with a new LuK flywheel is a smart, cost-effective alternative to resurfacing.
ATP – ATP Automatic Transmission Flex Plate (Part No.Z-102)
from
$72.99
Vehicles with automatic transmissions have a flex plate. The flex plates connect the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious and expensive damage. Broken flex plates cannot be repaired, they must be replaced. Pioneer Flex Plates are made of high-quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability.
Product Features:
See More
Product Features:
- Balanced to factory specs
- Fit and function like the original parts
- Restores normal operation
ATP – Flywheel Shim (Part No.TS-5)
from
$29.99
ATP Flywheel Shims install easily restoring machined manual transmission flywheels back to the proper height. On automatic transmissions the shim takes up excessive clearance caused by engine crankshaft endplay or by installing a rebuilt torque converter or rebuilt front pump.
See More
ATP – Flywheel Shim (Part No.TS-4)
from
$24.49
ATP Flywheel Shims install easily restoring machined manual transmission flywheels back to the proper height. On automatic transmissions the shim takes up excessive clearance caused by engine crankshaft endplay or by installing a rebuilt torque converter or rebuilt front pump.
See More
Dorman – Flywheel Bolts – Thread Size 7/16-20; Thread Length 0.900 In. (Sold by each) (Part No.678-154)
from
$4.49
This clutch flywheel bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch flywheel bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and Length service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
- Thread Size: 7/16-20
- Tread Length: 0.900 in.
- SAE
- PLEASE NOTE: Item priced and sold by each. See store for details.
Top Picks for 1982 Jeep Wagoneer Clutch Kits
Upgrade Jeep Wagoneers with top-quality Clutch Kits parts, including 2 OEM and aftermarket selections for your 1982 model.
LuK – Clutch Kit: 10 3/8" Disc Diameter, 1 1/8" Input Shaft Diameter, 10 Tooth Spline (Part No.01-017)
from
$165.99
LuK: The brand professionals trust. For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet clutch components. Each set contains everything you need to get the job done right. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Enjoy a light, comfortable pedal that stays consistent over the clutch’s life.
- Find the perfect LuK clutch engineered for your specific car or light commercial vehicle.
- Kits include everything needed for a quick, correct fit and reliable clutch performance.
LuK – Repset With Release Bearing (Part No.01-030)
from
$179.99
LuK: The brand professionals trust. For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet clutch components. Each set contains everything you need to get the job done right. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Enjoy a light, comfortable pedal that stays consistent over the clutch’s life.
- Find the perfect LuK clutch engineered for your specific car or light commercial vehicle.
- Kits include everything needed for a quick, correct fit and reliable clutch performance.
In-Demand Clutch Release Bearings for 1982 Jeep Wagoneers
Select from 2 premium Clutch Release Bearings parts for your 1982 Jeep Wagoneer, with prices ranging from $61.99 to $112.99.
Hays – Power Train (Part No.70-230)
from
$112.99
Hays high-performance throwout bearings have been developed to withstand the high-spring pressure and high RPM operation common to racing clutches. Each bearing face is heat-treated and Blanchard-ground to ensure trueness. The collars are heat-treated for strength and machined to close tolerances for secure bearing fork attachment. The ball-bearing race is packed with heat-resistant moly-based grease for better lubrication and longer life. A nylon liner and bearing retainer are also featured for cooler and quieter operation.
See More
National – Clutch Release Bearing (Part No.614115)
from
$61.99
Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.
Product Features:
See More
Product Features:
- BUILT TO LAST – Advanced heat treatment process for strength
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE – Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Most Sold 1982 Jeep Wagoneer Clutch Pilot Bearings
Explore our best-selling Jeep parts for the 1982 Wagoneer among 1 OEM and aftermarket options starting from $2.49.
Driveworks – Multi-Purpose Bearing (Part No.S-203-S)
from
$2.49
Carquest Standard Bearings provide OE fit, form and function
Product Features:
See More
Product Features:
- Brand may vary by location
Top-Rated Clutch Systems Brands For Your 1982 Jeep Wagoneer
Shop for the best-rated brands offering Clutch Systems and other products for your 1982 Jeep Wagoneers. Below you’ll find some of our best rated Clutch Systems from Dorman, and more. Clutch Systems from these brands that fit a 1982 Wagoneer start at just $11.49 and are rated as high as 4.2 stars. OEM and aftermarket Clutch Systems don’t get more top quality, durable, and affordable than from the brands below.
Popular Dorman 1982 Jeep Wagoneer Clutch Systems
When it comes to maintaining or upgrading your 1982 Jeep Wagoneer, using quality Clutch Systems is essential to ensure durability and a perfect fit. Dorman ticks all of those boxes. We offer a wide selection of Dorman Clutch Systems, specifically designed for the 1982 Jeep Wagoneer. With over 1 Dorman brand Clutch Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $11.49. Plus, with over 4 customer reviews and an average rating of 4.2 stars, you can trust that our Dorman Clutch Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
FAQs for 1982 Jeep Wagoneer Clutch Systems
Which Clutch Systems are best-sellers for 1982 Jeep Wagoneers?
Out of 20 Clutch Systems that fit 1982 Jeep Wagoneers, the following parts are the top sellers:
- Clutch Kit: 10 3/8" Disc Diameter, 1 1/8" Input Shaft Diameter, 10 Tooth Spline (10645736) – $165.99
- ATP Manual Transmission Flywheel Ring Gear (3923436) – $34.99
- Bellcrank, Black, Rubber, Set Of 2 (11740638) – $14.99
What’s the price range for 1982 Jeep Wagoneer Clutch Systems?
Clutch System prices for the 1982 Jeep Wagoneer start at $1.99 and go up to $179.99 for the most premium parts.
What’s the average price of a Clutch System for a 1982 Jeep Wagoneer?
The average price for Clutch Systems for the 1982 Jeep Wagoneer is $39.79. Keep in mind the variety of part types within our Clutch System category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Clutch Systems for other Jeep Wagoneer model years?
What are the cheapest Clutch Systems for my 1982 Jeep Wagoneer?
The cheapest 1982 Jeep Wagoneer Clutch Systems we carry in stock are:
- OE Replacement, Single (11900896) – $1.99
- Multi-Purpose Bearing (10659723) – $2.49
- OE Replacement, Single Inner (11900932) – $2.99
- OE Replacement, Metal (50259294) – $2.99
- Flywheel Bolts – Thread Size 7/16-20; Thread Length 0.900 In. (Sold by each) (22142246) – $4.49
What types of Clutch Systems do you sell for my 1982 Jeep Wagoneer?
As of 6/2/26, these are some of the most in-demand types of Clutch Systems for a 1982 Jeep Wagoneer:
Can I get help with 1982 Jeep Wagoneer Clutch System orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jeep Clutch Systems and more.
What is your return policy for Jeep Wagoneer Clutch Systems?
Advance Auto Parts keeps returns simple. For new Jeep Wagoneer Clutch Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
