1982 Jeep CJ7 Clutch Systems
More 1982 Jeep CJ7 Clutch Systems Categories
If you’re looking for an original Clutch Systems replacement for a 1982 Jeep CJ7, you can search through our selection below. You’ll also find aftermarket and OEM Clutch Systems to meet your needs.
Essential 1982 Jeep CJ7 Clutch Systems
Carquest Premium – TECHnovation Clutch Slave Cylinder (Part No.900021)
from
$26.99
Designed and engineered for faster installation than original equipment using existing lines and no special tools. OEM plastic cylinders can be prone to cracking/breakage. TECHnovation Clutch Hydraulics aluminum castings are made from solid blocks that are bored and honed for accurate tolerances and maximum durability.
Product Features:
See More
Product Features:
- Engineered and supported in the U.S.A. by our tech support team of experts in clutch system function
- Each unit includes vehicle-specific bulletins for accurate installation
- Online videos show step-by-step installation and bleeding procedures
- Includes pressure control valves, check valves, and fittings for ease of installation, bleeding, and maintaining OE performance levels
Carquest Premium – New Clutch Set (Part No.MU1897-1)
from
$173.99
New Perfection Clutch Sets include the following: New OEM-style cover assembly, computer-tested for clamp load, plate lift, and finger height; new OEM-style clutch disc with facings built to exceed OEM specifications; new clutch release bearing meeting or exceeding OEM specifications (where supplied); new pilot bearing/bushing (where used); alignment tool for the perfect clutch installation (where available); hydraulic line disconnect tool (where used).
Product Features:
See More
Product Features:
- New clutch disc with non-asbestos facings built to exceed OEM specifications for durability, safety, and positive engagement.
- Cover assembly is computer tested for clamp load, plate lift and finger height to ensure uniform and smooth operation
- Alignment tool included where available to ensure professional installation
- Where required, includes new pilot bearing or bushing to complete the job
Omix – Flywheel Ring Gear (Part No.16911.03)
from
$45.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- Use With 2.5L
- OE Style
- Direct Fit
- Limited 5 Year Warranty
LuK – OE Quality Flywheel (Part No.LFW192)
from
$109.99
LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new LuK flywheel is a smart, cost-effective alternative to resurfacing. All new – never remanufactured – every component is engineered and manufactured to OE specifications, including ring gear and dowel pins.
See More
Dorman – Flywheel Bolts – Thread Size 7/16-20; Thread Length 0.900 In. (sold by each) (Part No.678-154)
from
$3.99
This clutch flywheel bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch flywheel bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Crown Auto Jeep Replacmnt – With Bellcrank/ Clutch Fork Rod/ Adjuster, Bracket And Pivots/ Pedal Shaft Rod (Part No.5360104K)
from
$102.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Easy Installation
Omix – Clutch Bellcrank Clip (Part No.16919.19)
from
$4.79
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- OE Style
- Direct Fit
- Limited 5 Year Warranty
National – Multi Purpose Bearing (Part No.614115)
from
$55.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Design improvements include extended life and quiet operation
- Industry leading coverage
- Professional technicians know they can depend on National
ATP – FLYWHEEL SHIM (Part No.TS-3)
from
$24.99
FLYWHEEL SHIM
Omix – Clutch Master Cylinder Hose (Part No.16919.24)
from
$49.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- Pre-bent
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Omix – Clutch Fork Pivot Ball (Part No.16919.13)
from
$2.79
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- OE Style
- Direct Fit
- Limited 5 Year Warranty
ATP – AT CLUTCH PLATE (Part No.JC-57)
from
$12.99
AT CLUTCH PLATE
Omix – Clutch Bellcrank Boot (Part No.16919.18)
from
$3.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- Rubber
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Omix – Clutch Fork (Part No.16914.06)
from
$33.49
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- Steel
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Rugged Ridge – Clutch Link Kit (Part No.16919.30)
from
$163.99
This linkage kit replaces the original L-bracket and retainer-clip clutch rod with an upgraded spherical rod design. This allows for full clutch engagement during heavy body and frame flex situations while off road. The factory design has a tendency to bi
Product Features:
See More
Product Features:
- For Stock Up To 3 in. Body Lift
Crown Auto Jeep Replacmnt – OE Replacement, Single (Part No.5355322)
from
$13.29
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Easy Installation
Crown Auto Jeep Replacmnt – OE Replacement (Part No.J5351252)
from
$3.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Easy Installation
Crown Auto Jeep Replacmnt – OE Replacement, Adjustable Release Rod With Nut (Part No.J8126668)
from
$15.79
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Easy Installation
Carquest Premium – TECHnovation Clutch Master Cylinder (Part No.800012)
from
$44.99
Designed and engineered for faster installation than original equipment using existing lines and no special tools. OEM plastic cylinders can be prone to cracking/breakage. TECHnovation Clutch Hydraulics aluminum castings are made from solid blocks that are bored and honed for accurate tolerances and maximum durability.
Product Features:
See More
Product Features:
- Engineered and supported in the U.S.A. by our tech support team of experts in clutch system function
- Each unit includes vehicle-specific bulletins for accurate installation
- Online videos show step-by-step installation and bleeding procedures
- Includes pressure control valves, check valves, and fittings for ease of installation, bleeding, and maintaining OE performance levels
Omix – Clutch Housing Cover (Part No.16916.01)
from
$557.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- Use With T18; T150; T177; T178 Transmissions
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Omix – Clutch Cover (Part No.16904.05)
from
$294.99
Having problems with your clutch? Does it slip or chatter when you let the pedal out? The clutch disc, pressure plate, or throw-out bearing are probably worn out. It’s always a good idea to replace all three at the same time. That will save you labor in t
Product Features:
See More
Product Features:
- For 11 in. Clutch
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Omix – Clutch Cover (Part No.16904.07)
from
$145.99
Having problems with your clutch? Does it slip or chatter when you let the pedal out? The clutch disc, pressure plate, or throw-out bearing are probably worn out. It’s always a good idea to replace all three at the same time. That will save you labor in t
Product Features:
See More
Product Features:
- For 10.5 in. Clutch
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Omix – Clutch Bellcrank (Part No.16919.07)
from
$44.49
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- Steel
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Omix – Clutch Rod Boot (Part No.16919.02)
from
$20.49
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- Rubber
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Omix – Clutch K Spring (Part No.16919.16)
from
$2.79
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- Pre-bent
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Dorman – Clutch Pilot Bushing .756 In. x 1.056 In. Type A, Length .877 In. (sold by each) (Part No.690-042)
from
$5.49
This clutch pilot bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch pilot bushing matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Omix – Crankshaft Pilot Bearing (Part No.16910.03)
from
$44.49
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- Metal
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Omix – Pilot Bushing (Part No.16910.06)
from
$5.79
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- Metal
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Popular 1982 Jeep CJ7 Clutch Systems Categories
1982 Jeep CJ7 Clutch Systems
You count on your 1982 Jeep CJ7 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Clutch Systems. With 47 Clutch Systems ranging in price from $2.79 to $578.99, you’re sure to find everything you need for your 1982 Jeep CJ7.
Brands matter. If you want to shop a specific Clutch Systems brand, we stock 9 different brands like Dorman, National, and LuK. 1982 Jeep CJ7 Clutch Systems start as low as $2.79!
One of the best ways to find top quality OEM or aftermarket Clutch Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 12 extensive product reviews on 1982 Jeep CJ7 Clutch Systems. Some of the top-rated Clutch Systems products we carry are Clutch Slave Cylinder Pivot with 5.0 stars and Clutch Slave Cylinder Return Spring with 4.0 stars.
Did we mention you can order your Clutch Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Clutch Systems inventory for your 1982 Jeep CJ7 below to get started!
Top-Rated Clutch Systems Brands For Your 1982 Jeep CJ7
Trusted Clutch Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1982 Jeep CJ7 running right for years to come. In our inventory you’ll find brands like Dorman, National, LuK, and even more.
Popular National Clutch Systems
You’ll find popular National brand products across Clutch Pilot Bushings. All are waiting to get your 1982 Jeep CJ7 back on the road. Some of the top-rated National products in these categories are:
Top-Rated Dorman – Help Clutch Systems
If Dorman – Help are what you’re looking for, our inventory holds plenty. We stock Dorman – Help brand Clutch Systems for your 1982 Jeep CJ7, and some of our most reviewed Dorman – Help parts include:
from
$12.99
(2)
Flywheel Bolts Thread 7/16-20, Length .900 In. (22.86mm), Head Thickness .190 In
Flywheel Bolts
FAQs for 1982 Jeep CJ7 Clutch Systems
What are the most purchased Clutch Systems for the 1982 Jeep CJ7?
Out of 47 Clutch Systems for the 1982 Jeep CJ7, the most popular in our inventory are:
from
$176.99
This product is not rated
Clutch Kit: 10 3/8" Disc Diameter, 1 1/8" Input Shaft Diameter, 10 Tooth Spline
Clutch Sets
What are the top-rated 1982 Jeep CJ7 Clutch Systems?
Top-rated Clutch Systems for your 1982 Jeep CJ7 based on customer reviews/ratings are:
from
$4.29
(1)
Clutch Slave Cylinder Pivot
“This pivot for the clutch slave cylinder fits perfectly and no issues in my 1983 cj7”
from
$4.99
(1)
Clutch Slave Cylinder Return Spring
“I didn’t have this on my cj7 1983 but installed in with a new clutch cylinder and slave. I had to look online where this would go. I thought it woul”
from
$43.99
(1)
Automatic Transmission Flex Plate
“Didn’t fit my 79 CJ7 with the inline six. This is made for a four bolt converter, the Quadratrac uses a GM three bolt converter with the turbo 400 tra”
