1982 Jaguar XJ6 Steering and Chassis Parts

Essential 1982 Jaguar XJ6 Steering and Chassis Parts

Powercraft – Pump Drive Shaft Seal Kit (Part No.8709)

Pump Drive Shaft Seal Kit

from

$13.29
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Cardone – Rack and Pinion Assembly (Part No.26-1918)

Rack and Pinion Assembly

from

$440.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.

Product Features:
  • 100% replacement of rubber sealing components.
  • Application of specialized lubricant(s) for extended life.
  • Finished in protective coating to prevent corrosion and rust.
  • Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
See More

Rare Parts – Tie Rod End (Part No.RP28993)

Tie Rod End

from

$74.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Restores OE alignment
  • Reduces tire wear
  • Improves steering response
See More

Beck/Arnley – Steering Rack Boot Kit (Part No.103-2734)

Steering Rack Boot Kit

from

$31.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • One piece neoprene boot (this is not a split boot)
  • Includes boot and two clamps for complete installation.
  • Quality construction for durability
  • Application specific for this vehicle
See More

Whiteline – Sway Bar Link Washers (Part No.KW2)

Sway Bar Link Washers

from

$11.99
Has the thin galvanised metal washers on your OEM links flogged out? Whiteline have a specially designed, shaped and case hardened washers to suit the rigours wear and tear loads on sway bar link washers.

Product Features:
  • Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
See More

APA/URO Parts – Steering Rack Mount (Part No.M106037373APA)

Steering Rack Mount

from

$6.81
A.P.A. URO is a supplier to many automotive manufacturers and provides OE quality European replacement parts to the aftermarket. URO Parts is a highly diversified product line including, body rubber, electrical, suspension, steering, cooling and air conditioning components. Steel outer – neoprene inner – with steel center sleeve (as OE original) C29406 Washer May Also be Required
See More

Eurospares – Power Steering Return Hose (Part No.M2016103871ESP)

Power Steering Return Hose

from

$79.55
This OE quality power steering hose is the perfect replacement hose to meet the high demands placed on systems like power steering.

Product Features:
  • Manufactured as a direct OE replacement
  • Pressure tested to maintain a consistent flow
  • Backed by the manufactures warranty against workmanship and material defects
See More

Eurospare – P/S Return Hose (Part No.M2016107173ESP)

P/S Return Hose

from

$170.66
P/S Return Hose

MTC – Subframe Mount (Part No.L100586463MTC)

Subframe Mount

from

$24.15
The MTC Subframe Mount is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

MTC – Subframe Mount (Part No.L100541441MTC)

Subframe Mount

from

$17.10
The MTC Subframe Mount is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

Carquest Premium – Bulk – 3/8" I.D. Return Hose J189 (Part No.35002)

Bulk - 3/8" I.D. Return Hose J189

from

$46.49
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Carquest Premium – Bulk – 3/8" I.D. Return Hose J189 (Part No.36197)

Bulk - 3/8" I.D. Return Hose J189

from

$52.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Lemfoerder – OE Replacement Ball Joint (Part No.L202037407LEM)

OE Replacement Ball Joint

from

$86.12
The ultimate in safety and quality in steering and suspension is what sets LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions – as service and costs only meet the customer’s demands when high quality is implemented systematically.

Product Features:
  • OE expertise and quality
  • Precision manufactured housing and components
  • Corrosion protection
  • Permanently attached boot
  • One-piece forged housing for easier steering
See More

Powercraft – Pump Seal Kit (Part No.8834)

Pump Seal Kit

from

$65.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Powercraft – Pump Seal Kit (Part No.7918)

Pump Seal Kit

from

$36.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Cardone – Power Steering Pump (Part No.20-140)

Power Steering Pump

from

$98.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:
  • All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
  • All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
  • Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
  • Units are supplied with 100% tested and calibrated pressure relief valves.
  • Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Cardone – Power Steering Pump (Part No.20-7986)

Power Steering Pump

from

$131.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:
  • All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
  • All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
  • Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
  • Units are supplied with 100% tested and calibrated pressure relief valves.
  • Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Driveworks – Tapered Roller Bearing (Part No.S-HM-89410)

Tapered Roller Bearing

from

$4.99
Product Features:
  • Brand may vary by location
See More

National – Bearings (Part No.LM67010)

Bearings

from

$5.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Carquest Premium – Pressure Hose Assembly (Part No.36325)

Pressure Hose Assembly

from

$103.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Carquest Premium – Pressure Hose Assembly (Part No.36214)

Pressure Hose Assembly

from

$82.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Powercraft – Rack Pinion Seal Kit (Part No.9102)

Rack Pinion Seal Kit

from

$238.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Eurospare – STEERING RACK SEAL K (Part No.M102243395ESP)

STEERING RACK SEAL K

from

$143.70
STEERING RACK SEAL K

Cardone – Power Steering Filter (Part No.20-0038F)

Power Steering Filter

from

$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Cardone – Power Steering Filter (Part No.20-P038F)

Power Steering Filter

from

$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Powercraft – Rack Pinion Seal Kit (Part No.9103)

Rack Pinion Seal Kit

from

$191.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

1982 Jaguar XJ6 Steering and Chassis Parts

You count on your 1982 Jaguar XJ6 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 33 Steering and Chassis Parts ranging in price from $2.99 to $245.99, you’re sure to find everything you need for your 1982 Jaguar XJ6.

Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 16 different brands like Carquest Premium, Cardone, and Powercraft. 1982 Jaguar XJ6 Steering and Chassis Parts start as low as $2.99!

One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 216 extensive product reviews on 1982 Jaguar XJ6 Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Bulk – 3/8" I.D. Return Hose J189 with 4.6 stars and Pump Seal Kit with 4.6 stars.

Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1982 Jaguar XJ6 below to get started!

Top-Rated Steering and Chassis Parts Brands For Your 1982 Jaguar XJ6

Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1982 Jaguar XJ6 running right for years to come. In our inventory you’ll find brands like Carquest Premium, Cardone, Powercraft, and even more.

Popular MOOG Steering and Chassis Parts

You’ll find popular MOOG brand products across Tie Rods. All are waiting to get your 1982 Jaguar XJ6 back on the road. Some of the top-rated MOOG products in these categories are:
Steering Tie Rod End
from $39.49
(1)
Steering Tie Rod End
Tie Rod Ends

Top-Rated Cardone Steering and Chassis Parts


If Cardone are what you’re looking for, our inventory holds plenty. We stock Cardone brand Steering and Chassis Parts for your 1982 Jaguar XJ6, and some of our most reviewed Cardone parts include:
Power Steering Filter
from $31.99
(59)
Power Steering Filter
Power Steering Filters
Power Steering Pump
from $92.99
(2)
Power Steering Pump
Power Steering Pumps
Power Steering Filter
from $48.49
(2)
Power Steering Filter
Power Steering Filters

FAQs for 1982 Jaguar XJ6 Steering and Chassis Parts

What are the most purchased Steering and Chassis Parts for the 1982 Jaguar XJ6?

Out of 33 Steering and Chassis Parts for the 1982 Jaguar XJ6, the most popular in our inventory are:
Bulk - 3/8" I.D. Return Hose (J189) (sold by foot)
from $7.79
This product is not rated
Bulk – 3/8" I.D. Return Hose (J189) (sold by foot)
Power Steering Reservoir Hoses
Bulk - 3/8" ID Return Hose (CPE) (sold by each)
from $2.99
This product is not rated
Bulk – 3/8" ID Return Hose (CPE) (sold by each)
Power Steering Return Hoses
Pump Complete Rebuild Kit
from $62.99
(14)
Pump Complete Rebuild Kit
Power Steering Pump Kits

What are the top-rated 1982 Jaguar XJ6 Steering and Chassis Parts?

Top-rated Steering and Chassis Parts for your 1982 Jaguar XJ6 based on customer reviews/ratings are:
Bulk - 3/8" I.D. Return Hose J189
from $46.49
(17)
Bulk – 3/8" I.D. Return Hose J189
“There is plenty of hose to get the job done”
Pump Seal Kit
from $36.99
(5)
Pump Seal Kit
“Worked perfect!”
Pump Drive Shaft Seal Kit
from $13.29
(3)
Pump Drive Shaft Seal Kit
“Nice fit”