1982 GMC K1500 Vehicle Hoods

New Goodmark Box Of 25 Hood Pad Clips, Replaces Gm 3977775, 2 Inch Diameter

This exhaust gas recirculation (EGR) line is designed to match the fit of an original EGR line on specified vehicles. It is engineered to help restore proper air-fuel balance when a line is malfunctioning due to deposits built up in the EGR valve.

Hood release cable broken- This hood release cable is durably built to directly replace a worn-out or broken cable on specific vehicle years, makes and models.

This hood release cable is durably built to directly replace a worn-out or broken cable on specific vehicle years, makes and models.

This hood release cable is durably built to directly replace a worn-out or broken cable on specific vehicle years, makes and models.

New Goodmark Hood To Cowl Seal EXTERNAL SUPPLY>FDO>BACK ROOM-FDO>APPLICATION SPECIFIC from KAI

“Competition Cams Magnum 8.680″” Long, .080″” Wall, 5/16″” Diameter Pushrod, 7651-1. ”

Factory replacement M12x1.75x150mm flange head bolt kit, Stock replacement bolts are hard to find due to their uncommon length. This kit can be used for either GM LS/LT & Mopar Gen III Hemi poly mounts

Take control of your camshaft stability with the COMP Cams 8104-CR Camshaft Retainer Plate, engineered for GM LT1 and Vortec engines. Designed with precision and durability in mind, this retainer plate ensures secure camshaft positioning, reducing unwanted movement and enhancing overall valvetrain performance.

This Flowmaster Flow FX cat-back exhaust system is for the 1996-1999 GM 1500 trucks with the 5.7-liter engine. This system is manufactured using durable 409 stainless steel tubing and is mandrel bent for better exhaust gas flow. A Flow FX Series muffler is used for an improved sound level and maximum performance. This system uses dual 4.0-inch black ceramic coated tips that exit on the passenger side of the truck, just in front of the rear wheel. The system uses all the existing factory hanger locations and includes installation instructions and all necessary hardware for an easy installation that you can do at home. This system fits all single cab and extended cab models in both 2 and 4 wheel drive. Backed by Flowmaster’s Limited Warranty.

“Competition Cams Raised 1 Piece Guide Plate Set Chevrolet Big Block With 3/8″” Pushrod 7/16″” Stud, 4806-8. ”

These Builder Series tailpipes are constructed from 2.50-inch mandrel-bent 16-gauge aluminized steel tubing for maximum flow, tuck up high in the chassis for good clearance and exit out the sides behind the rear wheels. Designed to be used with a Single Inlet/Dual 2.50-inch Outlet mufflers such as part 9430452 (Super 44 Series) or 530552 (Super 50 Series) muffler. Covered by our 3-year Limited Warranty. Note: Some fitment may be necessary. Does Not include installation hardware or exhaust tips.

“Competition Cams Magnum Roller 1.72 Ratio Rocker Arm for BBC, Ford 429-460, 351C/M with 7/16″” Stud, 1411-1. ”

Off-Road racing applications can use Hooker BlackHeart BH13272 LT Swap Headers. Mounts feature a black powder-coated finish and Include (2) engine mounting brackets, attaching hardware and instructions.

This Flowmaster Outlaw cat-back exhaust system is for the 1996-1999 GM 1500 trucks with the 5.7-liter engine. This system is manufactured using durable 409 stainless steel tubing and is mandrel bent for better exhaust gas flow. A Super 10 Series muffler is used for an improved sound level and maximum performance. This system uses dual 4.5-inch black ceramic coated tips that can exit dual out the rear or dual out the side. The system uses all the existing factory hanger locations and includes installation instructions and all necessary hardware for an easy installation that you can do at home. This system fits all single cab and extended cab models in both 2 and 4 wheel drive. Backed by Flowmaster’s Limited Warranty.

Competition Cams 10 Degree Steel Retainer for 26120 Beehive Spring, 795-1.

“Competition Cams High Energy 8.684″” Long, 3/8″” Diameter Pushrod, 7814-1. ”

This Flowmaster Flow FX cat-back exhaust system is for the 1994-1995 GM 1500/2500 LD trucks with the 5.0 and 5.7-liter engines. This system is manufactured using durable 409 stainless steel tubing and is mandrel bent for better exhaust gas flow. A Flow FX Series muffler is used for an improved sound level and maximum performance. This system uses dual 4.5-inch black ceramic coated tips that exit dual out the side of the truck. The system uses all the existing factory hanger locations and includes installation instructions and all necessary hardware for an easy installation that you can do at home. This system fits all single cab and extended cab models in both 2 and 4 wheel drive. Backed by Flowmaster’s Limited Warranty.

Factory LS Vortec exhaust manifolds can be used along with the engine mounting brackets and are required to support a street-legal engine change (with catalytic converters). Mounts feature a black powder-coated finish and Include (2) engine mounting brackets, attaching hardware and instructions.