1982 GMC C2500 Air Intakes

Essential 1982 GMC C2500 Air Intakes

Edelbrock – Adjustable Carburetor Needle and Seat #12602 Size .097 With Viton Tip (Part No.12602)

Adjustable Carburetor Needle and Seat #12602 Size .097 With Viton Tip

from

$18.99
Product Features:
  • The Edelbrock #12602 Adjustable Inlet Needle and Seat assembly will fit Carburetors with center hung fuel bowls and can be used as replacements or performance upgrades.
  • Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 2300, 4150, 4160, 4165, 4175 and 4500 Series, Quick Fuel 4500, Professional Series and Q-Series, as well as various Demon Carburetors.
See More

Mr. Gasket – Intake Manifold Bolt Set – Chevrolet Small Block – Socket Head 3/8"-16 X 1" Bolts & Washers (Part No.956G)

Intake Manifold Bolt Set - Chevrolet Small Block - Socket Head 3/8"-16 X 1" Bolts & Washers

from

$17.49
These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8 inch-16 x 1 inch bolts & washers

Product Features:
  • Zinc plated to resist corrosion and provide a clean professional appearance
  • Made from Grade 5 steel for strength and durability
  • Flat washers provide uniform clamp load and prevent galling on aluminum intake manifolds
  • Allen (socket) Head
  • Zinc Plated For Protection
See More

Edelbrock – RPM Air-Gap Big Block Chevy 2-O Intake Manifold (Part No.7561)

RPM Air-Gap Big Block Chevy 2-O Intake Manifold

from

$438.99
Based on performer RPM-series with unique air gap. Air gap cooler and denser mixture for more power. Designed for 1500 to 6500 RPM street-driven power. Dual-plane high-rise intake with 180 degree firing order. Produces incredible top-end horsepower. Retains good throttle response and acceleration. Larger plenum and runners maximize other upgrades. Edelbrock total power package maximizes gains. Available in cast, polished or endurashine finish.

Product Features:
  • Based on Performer RPM-Series with Unique Air Gap
  • Air Gap Cooler and Denser Mixture for More Power
  • Designed for 1500 to 6500 RPM Street-Driven Power
  • Dual-Plane High-Rise Intake w/180 deg Firing Order
  • Produces Incredible Top-End Horsepower
  • Retains Good Throttle Response and Acceleration
  • Larger Plenum and Runners Maximizes Other Upgrades
  • Edelbrock Total Power Package Maximizes Gains
See More

Edelbrock – Carb Power Valve Block-Off Plug #12624 For Demon, Holley, & Quick Fuel Carbs (Part No.12624)

Carb Power Valve Block-Off Plug #12624 For Demon, Holley, & Quick Fuel Carbs

from

$12.99
The Edelbrock 94 Carburetor power valve block off #12624 is a great way to fine tune your vintage series carburetor. These Edelbrock Power valve Block Off’s will fit Edelbrock Vintage Series 94 carburetors as well as original Holley 94’s and its later var

Product Features:
  • Fits Any Demon®, Holley®, And Quick Fuel® Carburetors
  • Includes Gasket
  • 1/2 in. x 28 Power Valve Thread
  • For Applications That Prefer To Run Carbs Without The Power Valves
  • Made In The USA
See More

Edelbrock – Performer Carburetor Calibration Kit #1487 for #1406 Carburetors (Part No.1487)

Performer Carburetor Calibration Kit #1487 for #1406 Carburetors

from

$62.99
Product Features:
  • Customize Carburetor Calibration and Performance
  • Owners Manual has Assembly Help
  • Includes Metering Rod Retaining Spring
  • Includes Metering Rods
  • Includes Metering Jets
  • Includes Step-Up Springs
See More

Felpro – INTAKE MANIFOLD GASKET SET (Part No.MS 90240)

INTAKE MANIFOLD GASKET SET

from

$22.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Edelbrock – Carburetor Accelerator Pump Diaphragm #12401 50cc (Part No.12401)

Carburetor Accelerator Pump Diaphragm #12401 50cc

from

$31.99
Edelbrock #12401 50cc Accelerator Pump Diaphragm for 4150 Carburetors. Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.

Product Features:
  • Rubber Material
  • For Holley®, Barry Grant, And Demon Gasoline Carburetors
  • No Hardware Included
  • 50cc Volume
  • Made iIn The USA
See More

Wells Vehicle Electronics – Carburetor Choke Pull-Off (Part No.1C1141)

Carburetor Choke Pull-Off

from

$66.99
The carburetor is a device used to mix air and vaporized fuel for combustion in old school engine applications. The last year for carburetors in motor vehicles used on the road in the U.S. is listed as 1994. The carburetor was typically a down draft style device where oxygen was drawn from the top of the carburetor pulled in by the engine vacuum through a venturi style opening, just above the venturi were jets, or metered openings where fuel was pulled from a bowl of fuel within the carburetor.

Product Features:
  • Application matched components ensure carburetor can be returned to like new condition.
See More

Felpro – AIR CLEANER MOUNTING GASKET (Part No.60555)

AIR CLEANER MOUNTING GASKET

from

$3.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific, providing unsurpassed quality for a seal you can trust
  • Validated for fit, form, and function
  • Engineered for the sealing repair environment
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Dorman – Breather Element Clips – GM 2002-76-Use with breather elements: AC; FB59: Fram; CA19: Purolator; AF9 (Part No.41251)

Breather Element Clips - GM 2002-76-Use with breather elements: AC; FB59: Fram; CA19: Purolator; AF9

from

$1.99
Breather Element Clips – GM 2002-76-Use with breather elements: AC; FB59: Fram; CA19: Purolator; AF9

Edelbrock – Triple Carburetor Fuel Log Kit #1288 with 5-1/2 in. Outlet Spacing (Part No.1288)

Triple Carburetor Fuel Log Kit #1288 with 5-1/2 in. Outlet Spacing

from

$99.99
This Edelbrock Fuel Log kit #1284 is an exact replica of the original design used by Vic Sr. in the 1950’s. They are made from extruded aluminum tube with a 3/8″ threaded outlet at each end and a polished finish. Kit includes, black neoprene hose, Corbin

Product Features:
  • Polished Log
  • Brass Fittings
  • Black Neoprene Hose
  • 5-1/2 in. Outlet Spacing
  • Includes Hose Clamps
See More

ACDelco – Throttle Position Sensor (Part No.213-4668)

Throttle Position Sensor

from

$81.99
ACDelco Professional Throttle Position Sensor is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket sensor is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Edelbrock – Carburetor Progressive Throttle Linkage Kit for Triple Carb Set-up (Part No.1033)

Carburetor Progressive Throttle Linkage Kit for Triple Carb Set-up

from

$186.99
The Edelbrock part #1033 Progressive Linkage Kit is designed to smooth throttle response, eliminate flat spots and improve fuel economy. It achieves this by only opening the center carburetor at less than 50% (or 33%) pedal travel thus sharpening the vent

Product Features:
  • Steel Material
  • Zinc Plated
  • Adjustable
  • 3-Barrel Configuration
  • Made In The USA
See More

Edelbrock – Pro-Flo 1000 Series Chrome Air Cleaner with Foam Element with 5-1/8" Air Horn (Part No.1002)

Pro-Flo 1000 Series Chrome Air Cleaner with Foam Element with 5-1/8" Air Horn

from

$31.99


Product Features:
  • Super Flow; Good Filtration
  • Urethane Foam Element
  • Strong Metal Inner Frame
  • Performance Benefits
  • Cleans With Soap and Water
  • Low Maintenance Cost
  • Simple To Install
  • Nicely Finished; Low Profile
See More

Felpro – Carburetor Mounting Gasket (Part No.60249)

Carburetor Mounting Gasket

from

$6.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Edelbrock – Standard Main Jet Carburetor Metering Jet #12458 Size .057 (Pair) (Part No.12458)

Standard Main Jet Carburetor Metering Jet #12458 Size .057 (Pair)

from

$13.99
The Edelbrock 94 #12458 Carburetor Jets .058″Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94’s and its later variations. Jets sold in pairs.

Product Features:
  • 58 Maximum Jet Size
  • 0.057 in. Orifice Diameter
  • 1/14-32 in. Thread Size
  • Standard Main Jet Type
  • Set of 2
See More

Edelbrock – Carburetor Vacuum Secondary Spring Kit #12412 Includes 7 Springs (Part No.12412)

Carburetor Vacuum Secondary Spring Kit #12412 Includes 7 Springs

from

$24.99
The Edelbrock #12412 Vacuum Secondary Spring Kit includes 7 springs that will fit on Holley 4150, 4150HP, 4160 series and various Demon Carburetors.

Product Features:
  • Steel Material
  • For Holley® 4150, 4150HP, 4160; Demon King, Mighty, Race, Road, Sea, Speed; Barry Grant Claw
  • Includes Lightest To Heavy
  • Set of 7
  • Made in The USA
See More

Edelbrock – AVS2 1906 Carburetor: 650 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1906)

AVS2 1906 Carburetor: 650 CFM, 4 Barrel, Square Bore, Electric Choke Inlet

from

$446.99
The Edelbrock AVS2 Series #1906 is a satin-finished four-barrel carburetor with electric choke that is designed and calibrated for optimum street performance in engines that require an air-fuel flow of 650 CFM. The AVS2 is a perfect replacement or upgrade that features annular flow primary boosters with a new calibration for improved off-idle and cruising performance. The annular flow booster design delivers improved fuel atomization to eliminate flat spots that may be encountered as the carburetor transitions from idle to full throttle. Each annular flow booster features eight equally spaced orifices to improve fuel metering from idle to the main circuit. The improved flow metering makes this carburetor ideal for use with a wide variety of small- and big-block engines with either dual- or single-plane intake manifolds. The Edelbrock AVS2 #1906 includes both timed and full vacuum ports for ignition advance. It comes with: .101 primary and.098 secondary metering jets; .070 x .037 metering rods; orange (5″ Hg) step-up spring. Use our Carburetor Stud Kits #8008 or #8024 if needed. Match with a variety of manifolds that include Edelbrock Performer, Performer EPS, RPM Air-Gap, Performer RPM, Torker II or other brands of similar design. For a black-finished AVS2 with electric choke, order part #19063.

Product Features:
  • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
  • Electric Choke
  • 4 Barrel Count
  • Square Bore
See More

Edelbrock – Performer 1411 Carburetor: 750 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1411)

Performer 1411 Carburetor: 750 CFM, 4 Barrel, Square Bore, Electric Choke Inlet

from

$494.99
The Edelbrock 1411 Performer Series 750 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characterist

Product Features:
  • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
  • Electric Choke
  • 4 Barrel Count
  • Square Bore
  • Smooth Secondary Transition
  • Both Timed and Full Vacuum Ports
  • Includes PCV Outlet
See More

Edelbrock – Carburetor Accelerator Pump Cam Kit #12403 for 2300, 4150, And 4160 Carburetors (Part No.12403)

Carburetor Accelerator Pump Cam Kit #12403 for 2300, 4150, And 4160 Carburetors

from

$40.99
The Edelbrock #12403 Accelerator Pump Cam Kit Assortment Package of 8. These accelerator pump cams will have different shapes and profiles, allowing you to fine tune the accelerator pump’s performance to the engine’s requirements. Cam “lift” will directly

Product Features:
  • Multi-Color
  • Plastic Material
  • Fits Holley® 2300, 4150, And 4160 Carburetors
  • Set of 8
  • Made In The USA
See More

Wells Vehicle Electronics – Carburetor Tune-Up Kit (Part No.2G1852)

Carburetor Tune-Up Kit

from

$79.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.
See More

Edelbrock – Carburetor Repair Kit #12760 Fits Most Holley 4150 Carburetors (Part No.12760)

Carburetor Repair Kit #12760 Fits Most Holley 4150 Carburetors

from

$57.99
Product Features:
  • The Edelbrock #12760 4150 Carburetor rebuild kit is for Holley, Demon and Quick Fuel Carburetors.
  • The kit comes with the necessary components to rebuild a 4150 style Carburetor.
See More

Felpro – Carburetor Choke Tube Gasket (Part No.72587)

Carburetor Choke Tube Gasket

from

$1.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Felpro – Carburetor Choke Tube Gasket (Part No.72591)

Carburetor Choke Tube Gasket

from

$4.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Carquest – Carburetor Choke Thermostat (Part No.779-663)

Carburetor Choke Thermostat

from

$35.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Designed and manufactured to our stringent quality standards at a certified facility, so you can install with confidence
  • Premium components and durable materials withstand harsh engine conditions to increase longevity and lifespan
  • Undergoes extensive testing and validation for proper performance and peak reliability
  • As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process
See More

Carquest – Carburetor Choke Thermostat (Part No.779-1485)

Carburetor Choke Thermostat

from

$69.05
Carquest distributes a full line of engine management products, providing the aftermarket with premium quality and comprehensive coverage.
See More

Wells Vehicle Electronics – Carburetor Choke Thermostat (Part No.2C1103)

Carburetor Choke Thermostat

from

$24.99
The carburetor is a device used to mix air and vaporized fuel for combustion in old school engine applications. The last year for carburetors in motor vehicles used on the road in the U.S. is listed as 1994. The carburetor was typically a down draft style device where oxygen was drawn from the top of the carburetor pulled in by the engine vacuum through a venturi style opening, just above the venturi were jets, or metered openings where fuel was pulled from a bowl of fuel within the carburetor.

Product Features:
  • Application matched components ensure carburetor can be returned to like new condition.
See More

Wells Vehicle Electronics – Carburetor Choke Thermostat (Part No.2C1098)

Carburetor Choke Thermostat

from

$48.99
The carburetor is a device used to mix air and vaporized fuel for combustion in old school engine applications. The last year for carburetors in motor vehicles used on the road in the U.S. is listed as 1994. The carburetor was typically a down draft style device where oxygen was drawn from the top of the carburetor pulled in by the engine vacuum through a venturi style opening, just above the venturi were jets, or metered openings where fuel was pulled from a bowl of fuel within the carburetor.

Product Features:
  • Application matched components ensure carburetor can be returned to like new condition.
See More

1982 GMC C2500 Air Intakes

You count on your 1982 GMC C2500 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Air Intakes. With 117 Air Intakes ranging in price from $1.49 to $1,776.99, you’re sure to find everything you need for your 1982 GMC C2500.

Brands matter. If you want to shop a specific Air Intakes brand, we stock 12 different brands like Felpro, Edelbrock, and Mr. Gasket. 1982 GMC C2500 Air Intakes start as low as $1.49!

One of the best ways to find top quality OEM or aftermarket Air Intakes is by asking professionals. Short of that, you can shop with confidence thanks to our 731 extensive product reviews on 1982 GMC C2500 Air Intakes. Some of the top-rated Air Intakes products we carry are Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet with 4.4 stars and Carburetor Vacuum Secondary Spring Kit #12412 Includes 7 Springs with 4.5 stars.

Did we mention you can order your Air Intakes from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Air Intakes inventory for your 1982 GMC C2500 below to get started!

Top-Rated Air Intakes Brands For Your 1982 GMC C2500

Trusted Air Intakes OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1982 GMC C2500 running right for years to come. In our inventory you’ll find brands like Felpro, Edelbrock, Mr. Gasket, and even more.

Popular Felpro Air Intakes

You’ll find popular Felpro brand products across Air Cleaner Parts and Intake Manifold Parts. All are waiting to get your 1982 GMC C2500 back on the road. Some of the top-rated Felpro products in these categories are:
Air Cleaner Mounting Gasket
from $3.29
(39)
Air Cleaner Mounting Gasket
Air Cleaner Mount Gaskets
INTAKE MANIFOLD GASKET SET
from $25.99
(2)
INTAKE MANIFOLD GASKET SET
Intake Manifold Gasket Sets
Engine Intake Manifold Gasket Set
from $29.99
(46)
Engine Intake Manifold Gasket Set
Intake Manifold Gasket Sets

Top-Rated Edelbrock Air Intakes


If Edelbrock are what you’re looking for, our inventory holds plenty. We stock Edelbrock brand Air Intakes for your 1982 GMC C2500, and some of our most reviewed Edelbrock parts include:

FAQs for 1982 GMC C2500 Air Intakes

What are the most purchased Air Intakes for the 1982 GMC C2500?

Out of 117 Air Intakes for the 1982 GMC C2500, the most popular in our inventory are:
Intake Manifold Bolts
from $15.49
(12)
Intake Manifold Bolts
Intake Manifold Bolt Sets
Carburetor Mounting Gasket
from $16.29
(3)
Carburetor Mounting Gasket
Carburetor and Injector Mount Gaskets

What are the top-rated 1982 GMC C2500 Air Intakes?

Top-rated Air Intakes for your 1982 GMC C2500 based on customer reviews/ratings are:
Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet
from $451.99
(7)
Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet
“Easy install, had it installed in less then 30 mins on my 70 camaro 350 after my holley failed. It started right up only adjustment i had to do was tu”
Ultra Seal: Intake Gasket
from $49.49
(5)
Ultra Seal: Intake Gasket
“I bought this to replace the CV Axle because the inner boot on my old axle was flinging grease. This part was a perfect replacement for my 2008 Honda ”