1982 Dodge W150 Drivetrains
More 1982 Dodge W150 Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1982 Dodge W150, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1982 Dodge W150 Drivetrains
Yukon Gear – Dana 44 Cover Gasket Replacement (Part No.23006)
Motive Gear – Drive Shaft Pinion Yoke (Part No.MG1350-8759)
Yukon Gear – Minor Install Kit For Dana 44 Disconnect Differential (Part No.12019)
from
$115.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.
Product Features:
See More
Product Features:
- Fits Dana Spicer 44 disconnect front
- Included are a pinion seal, complete shim kit, marking compound and brush.
Dorman – Differential Pinion Yoke Assembly (Part No.697-542)
from
$111.99
Drive shaft pinion yoke corroded or damaged? This pinion yoke directly replaces the original equipment on specific vehicle years, makes and models to restore smooth driving.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft pinion yoke directly replaces the original equipment on specified vehicles
- Effective fix – replacement restores proper connection between drive shaft and differential
- Rigorously tested – designed and evaluated to assure safe, reliable operation
- Trustworthy quality – backed by team of engineers and inspectors in the United States
Spicer – Universal Joint (Part No.5-1410X)
from
$51.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More
Yukon Gear – R1561Tv Rear Axle Bearing And Seal Kit (Part No.10002)
from
$88.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1561TV axle bearing and seal kit, for Ford and Dodge, TorringtonBrand, 2.985″ OD, 1.700″ ID. This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Fits Ford and Dodge applications
- Includes axle bearing and seal
- Torrington Brand
- Services one side
- 2.985″ O.D.
- 1.700″ I.D.
National – Wheel Bearing and Seal Kit (Part No.SBK-1)
from
$19.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Spindle bearing and seal kit
- Includes all components required to complete the repair
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Pinion Install Kit For Dana 44 Differential (Part No.13020)
from
$275.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits standard rotation Dana Spicer 44 front
- Included are pinion bearings and races, pinion seal, complete pinion shim kit, and marking compound with brush.
Milemarker – MileMarker Supreme; Manual Hub (Part No.104)
from
$204.99
Ultimate in style and service. Latest patented technology. Smooth operation. Limited lifetime warranty. 10 spline, 6 bolts. Chrome.
Product Features:
See More
Product Features:
- Ultimate In Style And Service
- Latest Patented Technology
- Smooth Operation
- Limited Lifetime Warranty
Motive Gear – Drive Shaft Pinion Yoke (Part No.MG1310-6010)
Yukon Gear – 1541H Alloy 5 Lug Rear Axle For ’84 And Older Chrysler 8.25" Truck (Part No.21023)
from
$273.99
Yukon 1541H alloy 5 lug rear axle for ’84 and older Chrysler 8.25″ truck with a length of 31-13/16 inches and 27 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. This is a C-clip axle.
Product Features:
See More
Product Features:
- 27 spline
- 5 lug
- 31 13/16″ long
- Fits Chrysler 8.25″ in 1984 and down Dodge 2WD truck
Yukon Gear – Seal Housing For Dana 44, Zip Locker, With O-Rings (Part No.34013)
Motive Gear – Differential Mini Spool (Part No.MSD44-30)
Yukon Gear – Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement (Part No.33249)
from
$8.99
Product Features:
See More
- Clutch guide for Chrysler 9.25″, Dana Spicer 44 and Dana Spicer 60
- For Trac Loc positraction applications only
National – Multi Purpose Seal (Part No.341022)
from
$8.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Bearings (Part No.207)
from
$32.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Rubber Fill Plug For Chrysler (Part No.33463)
Felpro – Axle Housing Cover Gasket (Part No.RDS 6629)
from
$6.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Yukon Gear – Spindle Nut For Dana 30 & Dana 44, .372" Thick (Part No.33474)
from
$22.99
Spindle nut for Dana 30 & Dana 44, .372″ thick. This replaces Spicer part number 21588X.
Product Features:
See More
Product Features:
- Spindle nut for Dana Spicer 30 and 44
- 0.372″ thick
Yukon Gear – Mighty Seal (Part No.30083)
from
$7.99
Front wheel seal.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Front wheel bearing seal
- Fits 1955-1993 GM half ton front
Needa Parts – Differential Plug, Rubber, Chrysler 2008-2000 (Part No.65293)
from
$5.99
This differential cover plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this differential cover plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Replacement Oil Baffle For Dana 44 (Part No.33000)
Yukon Gear – Dana 30 / 44 Roll Pin Replacement (Part No.33312)
from
$12.99
Dana 30 & Dana 44 roll PIN, 0.235″ DIA, for cross pin shaft.
Product Features:
See More
Product Features:
- Roll pin for Dana Spicer 30 and Dana Spicer 44
- 0.235″ diameter
National – Shaft Repair Sleeve (Part No.99155)
from
$38.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Yukon Gear – Drive Flange Cap For Dana 44, Engraved (Part No.32135)
USA Standard Gear – Bearing Kit For Chrysler 8.25", ’76-’04 (Part No.58014)
from
$145.99
This kit uses Koyo bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. USA Standard Gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.
Product Features:
See More
Product Features:
- Fits 1976-2004 Chrysler 8.25″
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, pinion nut, crush sleeve, marking compound and brush.
Motive Gear – Differential Master Bearing Kit – Timken (Part No.R8.25RMKT)
from
$125.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv
Product Features:
See More
Product Features:
- MASTER KIT CHRYSLER 8.25″
Motive Gear – Differential Master Bearing Kit – Timken (Part No.R9.25RMKT)
from
$142.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv
Product Features:
See More
Product Features:
- MASTER KIT CHRYSLER 9.25″
Popular 1982 Dodge W150 Drivetrains Categories
1982 Dodge W150 Drivetrains
You count on your 1982 Dodge W150 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 466 Drivetrains ranging in price from $1.99 to $2,364.99, you’re sure to find everything you need for your 1982 Dodge W150.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 21 different brands like Moog, National, and DriveWorks. 1982 Dodge W150 Drivetrains start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 1,755 extensive product reviews on 1982 Dodge W150 Drivetrains. Some of the top-rated Drivetrains products we carry are Differential Cover Gasket with 4.7 stars and Multi Purpose Bearing with 3.4 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1982 Dodge W150 below to get started!
Top-Rated Drivetrains Brands For Your 1982 Dodge W150
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1982 Dodge W150 running right for years to come. In our inventory you’ll find brands like Moog, National, DriveWorks, and even more.
Popular Needa Parts Drivetrains
You’ll find popular Needa Parts brand products across Differentials. All are waiting to get your 1982 Dodge W150 back on the road. Some of the top-rated Needa Parts products in these categories are:
Top-Rated MOOG Driveline Products Drivetrains
If MOOG Driveline Products are what you’re looking for, our inventory holds plenty. We stock MOOG Driveline Products brand Drivetrains for your 1982 Dodge W150, and some of our most reviewed MOOG Driveline Products parts include:
FAQs for 1982 Dodge W150 Drivetrains
What are the most purchased Drivetrains for the 1982 Dodge W150?
Out of 466 Drivetrains for the 1982 Dodge W150, the most popular in our inventory are:
What are the top-rated 1982 Dodge W150 Drivetrains?
Top-rated Drivetrains for your 1982 Dodge W150 based on customer reviews/ratings are:
from
$14.99
(20)
Multi Purpose Seal
“THIS WAS a project to install because of where it is located in the shift housing. go on this site:[@] click on axle tech. this was a big help. but s”
