1982 Chevrolet S10 Air Intakes

Essential Air Intakes for 1982 Chevrolet S10s

Dorman – Steel Cup Expansion Plug 7/8 In., Height 0.340 (sold by each) (Part No.555-014)

Steel Cup Expansion Plug 7/8 In., Height 0.340 (sold by each)

from

$1.49
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 98002 T)

Engine Intake Manifold Gasket Set

from

$92.99
Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • STRONG AND DURABLE — Features molded rubber over an aluminized steel carrier which resists high heat and coolants
  • SUPERIOR SEAL — Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
  • EASIER TO INSTALL — Locating tabs assure proper alignment and easier installation
  • PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Felpro – INTAKE MANIFOLD GASKET SET (Part No.MS 95393)

INTAKE MANIFOLD GASKET SET

from

$25.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Felpro – INTAKE MANIFOLD GASKET SET (Part No.MS 95817)

INTAKE MANIFOLD GASKET SET

from

$46.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for repair applications
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
  • Includes all parts needed to complete the repair
See More

Wells Vehicle Electronics – Carburetor Tune-Up Kit (Part No.2G1829)

Carburetor Tune-Up Kit

from

$29.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.
See More

Wells Vehicle Electronics – Carburetor Tune-Up Kit (Part No.2G1901)

Carburetor Tune-Up Kit

from

$26.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.
See More

Carquest Premium – Fuel Injector Seal Kit (Part No.AS007)

Fuel Injector Seal Kit

from

$11.99
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:
  • Premium OE quality materials
  • Services one injector
See More

Carquest Premium – Throttle Sensor (Part No.ECC1461)

Throttle Sensor

from

$53.99
Carquest Throttle Position Sensors offer precision signaling to the ECM to ensure optimum performance and fuel economy. Manufactured using the highest quality OEM approved materials, resulting in tighter tolerances and increased durability. All Carquest Throttle Position Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Manufactured to provide superior sealing, protecting against all engine bay contaminants and insulation from extreme hot and cold temperatures.
  • 100% calibrated and end-of-line tested to ensure worry-free, out-of-the-box performance
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

NTK – Throttle Position Sensor (Part No.TH0045)

Throttle Position Sensor

from

$44.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • NTK’s Throttle Position Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper feedback to the ECU to control engine performance.
  • The Throttle Position Sensor (TPS) reports the angle of the throttle plate to the PCM for optimal engine operation under all engine load conditions.
See More

Carquest Premium – Throttle Position Sensor w/ Hardware (Part No.ECC1053)

Throttle Position Sensor w/ Hardware

from

$56.99
MotoRad Throttle Position Sensors offer precision signaling to the ECM to ensure optimum performance and fuel economy. Manufactured using the highest quality OEM approved materials, resulting in tighter tolerances and increased durability. All MotoRad Throttle Position Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Manufactured to provide superior sealing, protecting against all engine bay contaminants and insulation from extreme hot and cold temperatures.
  • 100% calibrated and end-of-line tested to ensure worry-free, out-of-the-box performance
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Wells Vehicle Electronics – Carburetor Choke Pull-Off (Part No.1C1010)

Carburetor Choke Pull-Off

from

$62.99
The carburetor is a device used to mix air and vaporized fuel for combustion in old school engine applications. The last year for carburetors in motor vehicles used on the road in the U.S. is listed as 1994. The carburetor was typically a down draft style device where oxygen was drawn from the top of the carburetor pulled in by the engine vacuum through a venturi style opening, just above the venturi were jets, or metered openings where fuel was pulled from a bowl of fuel within the carburetor.

Product Features:
  • Application matched components ensure carburetor can be returned to like new condition.
See More

Wells Vehicle Electronics – Carburetor Choke Pull-Off (Part No.1C1139)

Carburetor Choke Pull-Off

from

$41.99
The carburetor is a device used to mix air and vaporized fuel for combustion in old school engine applications. The last year for carburetors in motor vehicles used on the road in the U.S. is listed as 1994. The carburetor was typically a down draft style device where oxygen was drawn from the top of the carburetor pulled in by the engine vacuum through a venturi style opening, just above the venturi were jets, or metered openings where fuel was pulled from a bowl of fuel within the carburetor.

Product Features:
  • Application matched components ensure carburetor can be returned to like new condition.
See More

Wells Vehicle Electronics – Carburetor Choke Pull-Off (Part No.1C1108)

Carburetor Choke Pull-Off

from

$34.99
The carburetor is a device used to mix air and vaporized fuel for combustion in old school engine applications. The last year for carburetors in motor vehicles used on the road in the U.S. is listed as 1994. The carburetor was typically a down draft style device where oxygen was drawn from the top of the carburetor pulled in by the engine vacuum through a venturi style opening, just above the venturi were jets, or metered openings where fuel was pulled from a bowl of fuel within the carburetor.

Product Features:
  • Application matched components ensure carburetor can be returned to like new condition.
See More

Dorman – GM Bumper Retainer (Part No.961-364D)

GM Bumper Retainer

from

$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Dorman – Nylon Grill Bumper Retainer (Part No.961-364)

Nylon Grill Bumper Retainer

from

$3.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Felpro – Carburetor Mounting Gasket (Part No.60446)

Carburetor Mounting Gasket

from

$10.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Carquest Premium – Barometric Pressure Sensor Connector (Part No.PTA1166)

Barometric Pressure Sensor Connector

from

$17.79
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Dorman – Electrical Harness – 3-Wire Throttle Position Sensor (Part No.85186)

Electrical Harness - 3-Wire Throttle Position Sensor

from

$16.29
This throttle position sensor connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this throttle position sensor connector matches the appearance and function of the factory hardware on specified applications.
  • Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

United Carb – Remanufactured Carburetor 2 Barrel (Part No.3-3816)

Remanufactured Carburetor 2 Barrel

from

$392.99
Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.
See More

United Carb – Remanufactured Carburetor (Part No.URC-CH100)

Remanufactured Carburetor

from

$354.99
Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.
See More

United Carb – Remanufactured Carburetor (Part No.URC-CH101)

Remanufactured Carburetor

from

$492.99
Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.
See More

United Carb – Remanufactured Carburetor 2 Barrel (Part No.3-3777)

Remanufactured Carburetor 2 Barrel

from

$413.99
Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.
See More

Wells Vehicle Electronics – Carburetor Choke Thermostat (Part No.2C1010)

Carburetor Choke Thermostat

from

$48.99
The carburetor is a device used to mix air and vaporized fuel for combustion in old school engine applications. The last year for carburetors in motor vehicles used on the road in the U.S. is listed as 1994. The carburetor was typically a down draft style device where oxygen was drawn from the top of the carburetor pulled in by the engine vacuum through a venturi style opening, just above the venturi were jets, or metered openings where fuel was pulled from a bowl of fuel within the carburetor.

Product Features:
  • Application matched components ensure carburetor can be returned to like new condition.
See More

Wells Vehicle Electronics – Carburetor Choke Thermostat (Part No.2C1022)

Carburetor Choke Thermostat

from

$10.99
Carburetor Choke Thermostat

Wells Vehicle Electronics – Carburetor Choke Thermostat (Part No.2C1062)

Carburetor Choke Thermostat

from

$27.99
Carburetor Choke Thermostat

Carquest – Carburetor Choke Thermostat (Part No.779-1492)

Carburetor Choke Thermostat

from

$69.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
See More

Upgrade your 1982 Chevrolet S10 with Top-Quality Air Intakes

When it comes to maintaining or upgrading your 1982 Chevrolet S10, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Air Intakes are key to keeping your S10 functioning at its best. At Advance Auto Parts, we offer a wide selection of 16 Air Intakes for the 1982 Chevrolet S10, designed to meet your needs without breaking the bank. From Intake Manifold Part replacements to Throttle Bodies & Carb Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Air Intakes for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Air Intakes for your 1982 Chevrolet S10 at great prices. Our Air Intakes inventory for this model ranges from just $1.49 to $492.99, with an average price of $83.43. Our 16 Air Intakes in stock come from 6 trusted brands, so you’re sure to find the right part for your 1982 Chevrolet S10 without overspending.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Air Intake upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1982 Chevrolet S10 is always ready to roll. We’re committed to providing you with everything you need to keep your S10 in top shape, all in one place. Start shopping confidently below for your 1982 Chevrolet S10!

Best-Selling Intake Manifold Parts for 1982 Chevrolet S10s

Enhance the driving experience in your Chevrolet with 4 quality Intake Manifold Part components, starting at $1.49.

Dorman – Steel Cup Expansion Plug 7/8 In., Height 0.340 (sold by each) (Part No.555-014)

Steel Cup Expansion Plug 7/8 In., Height 0.340 (sold by each)

from

$1.49
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 91022)

Engine Intake Manifold Gasket Set

from

$30.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Edelbrock – Intake Manifold replacement runner to base gaskets (Part No.6942)

Intake Manifold replacement runner to base gaskets

from

$14.99


Product Features:
  • Replacement Gasket For PN[3789] Edelbrock Intake
  • One Gasket Only
  • Goes Between Base pn[3785] And Top PN[3789]
  • Also Included in Base PN[3789]
See More

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 90394)

Engine Intake Manifold Gasket Set

from

$7.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Most Popular 1982 Chevrolet S10 Throttle Bodies & Carb Parts

Customize your Chevrolet with 2 Throttle Bodies & Carb Parts products like Throttle Position Sensors and Throttle Position Sensor Connectors, all priced under $53.99.

Carquest Premium – Barometric Pressure Sensor Connector (Part No.PTA1166)

Barometric Pressure Sensor Connector

from

$17.79
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Throttle Sensor (Part No.ECC1461)

Throttle Sensor

from

$53.99
Carquest Throttle Position Sensors offer precision signaling to the ECM to ensure optimum performance and fuel economy. Manufactured using the highest quality OEM approved materials, resulting in tighter tolerances and increased durability. All Carquest Throttle Position Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Manufactured to provide superior sealing, protecting against all engine bay contaminants and insulation from extreme hot and cold temperatures.
  • 100% calibrated and end-of-line tested to ensure worry-free, out-of-the-box performance
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Top Picks for 1982 Chevrolet S10 Carburetor Parts

Upgrade Chevrolet S10s with top-quality Carburetor Parts parts, including 4 OEM and aftermarket selections for your 1982 model.

United Carb – Remanufactured Carburetor 2 Barrel (Part No.3-3777)

Remanufactured Carburetor 2 Barrel

from

$413.99
Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.
See More

Felpro – Carburetor Mounting Gasket (Part No.60446)

Carburetor Mounting Gasket

from

$10.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

United Carb – Remanufactured Carburetor (Part No.URC-CH101)

Remanufactured Carburetor

from

$492.99
Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.
See More

United Carb – Remanufactured Carburetor (Part No.URC-CH100)

Remanufactured Carburetor

from

$354.99
Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.
See More

In-Demand Airboxes for 1982 Chevrolet S10s

Select from 2 premium Airboxes parts for your 1982 Chevrolet S10, with prices ranging from $3.99 to $4.49.

Dorman – GM Bumper Retainer (Part No.961-364D)

GM Bumper Retainer

from

$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Dorman – Nylon Grill Bumper Retainer (Part No.961-364)

Nylon Grill Bumper Retainer

from

$3.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Most Sold 1982 Chevrolet S10 Carburetor Kits

Explore our best-selling Chevrolet parts for the 1982 S10 among 2 OEM and aftermarket options starting from $26.99.

Wells Vehicle Electronics – Carburetor Tune-Up Kit (Part No.2G1829)

Carburetor Tune-Up Kit

from

$29.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.
See More

Wells Vehicle Electronics – Carburetor Tune-Up Kit (Part No.2G1901)

Carburetor Tune-Up Kit

from

$26.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.
See More

FAQs for 1982 Chevrolet S10 Air Intakes

Which Air Intakes are best-sellers for 1982 Chevrolet S10s?

Out of 16 Air Intakes that fit 1982 Chevrolet S10s, the following parts are the top sellers:

What’s the price range for 1982 Chevrolet S10 Air Intakes?

Air Intake prices for the 1982 Chevrolet S10 start at $1.49 and go up to $492.99 for the most premium parts.

What’s the average price of a Air Intake for a 1982 Chevrolet S10?

The average price for Air Intakes for the 1982 Chevrolet S10 is $83.43. Keep in mind the variety of part types within our Air Intake category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Air Intakes for other Chevrolet S10 model years?

Yes, we currently carry Air Intakes for 21 model years of Chevrolet S10s between 1983 and 2003. Air Intakes are bought most frequently for the following model years: 2003, 2002, 2001, 2000, 1999, 1998, 1997, 1996, and 1995.

What are the cheapest Air Intakes for my 1982 Chevrolet S10?

The cheapest 1982 Chevrolet S10 Air Intakes we carry in stock are:

What types of Air Intakes do you sell for my 1982 Chevrolet S10?

Can I get help with 1982 Chevrolet S10 Air Intake orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Air Intakes and more.

What is your return policy for Chevrolet S10 Air Intakes?

Advance Auto Parts keeps returns simple. For new Chevrolet S10 Air Intakes and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.