1982 Chevrolet Malibu Ignition Wires
More 1982 Chevrolet Malibu Ignition Wires
Find your specific 1982 Chevrolet Malibu original or aftermarket Ignition Wires below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1982 Chevrolet Malibu Ignition Wires
Mallory – Mallory Prosidewinder 135F Univ/Wire Set (Part No.947)
from
$153.99
Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit: includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.
Product Features:
See More
Product Features:
- Most Advanced Wire By Mallory
- RFI Suppression
- High Temperature Silicone Jacket
- Withstands Over 500+F
- Come In Ready To Use Kits
- Extra Long Kits
MSD Ignition – Wire Set; Super Conductor; Multi-Angle Plug; Socket/HEI (Part No.31179)
from
$143.99
Set includes terminals for engines with early type (socket) and late type (HEI spark plug top) distributor caps. 90 degree boots and terminals factory installed on one end.
Product Features:
See More
Product Features:
- Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
- Incl. both socket-style and spark plug-style boots and terminals
- Includes Mini-Stripper-Crimper For Factory Style Crimps
- Size Includes [6] 90 Deg. Boots/Terminals
- Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
- Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
Accel – 8Mm Super Stock Spiral Uni Rd (Part No.5040R)
from
$101.99
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.
Product Features:
See More
Product Features:
- 500 Ohms/ft Of Resistance
- 550 F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- High RFI Suppression For Street And Strip Use
- Universal And Import Coverage
- High-strength Fiberglass Braid Construction
- Pre And Post HEI Vehicles
- 8mm High Gloss Silicone Jacket
PerTronix – 808308 Flame-Thrower Spark Plug Wires 8 cyl 8mm GM HEI Custom Fit Blue (Part No.808308)
from
$67.99
8mm Custom fit MAGx2 wires are available for many popular applications equipped with Flame-Thrower or original GM HEI distributors. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cuttting, crimping and
Product Features:
See More
Product Features:
- PerTronix 808308 Flame-Thrower Spark Plug Wires 8 cyl 8mm GM HEI Custom Fit Blue
- Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
Accel – 7Mm Super Stock Copper Uni (Part No.3008)
from
$53.09
ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.
Product Features:
See More
Product Features:
- 7mm Yellow Silicone Jacket
- Street-driven Applications
- Copper Core
- Orange Spark Plug Boots
- Pre HEI Vehicles
- Universal Wire Set
Mallory – Mallory Prosidewinder 90F Univ. Wire Set (Part No.937)
from
$133.99
Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit: includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.
Product Features:
See More
Product Features:
- Most Advanced Wire By Mallory
- RFI Suppression
- High Temperature Silicone Jacket
- Withstands Over 500+F
- Come In Ready To Use Kits
- Extra Long Kits
Accel – 8Mm Super Stock Graphite Uni (Part No.4041R)
from
$63.29
ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.
Product Features:
See More
Product Features:
- 7mm And 8mm High Gloss Silicone Jacket
- 450 F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- RFI Suppression For Street Driven Applications
- Custom-fit Universal And Import Coverage
- High-strength Fiberglass Braid Construction
- Pre And Post HEI Vehicles
Accel – Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set (Part No.4040)
from
$63.99
These ACCEL wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with black wire contain zinc-plated steel terminals. Noise suppression core. Set contains 8 plug wires with coil lead.
Product Features:
See More
Product Features:
- 7mm And 8mm High Gloss Silicone Jacket
- 450° F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- RFI Suppression For Street Driven Applications
- Custom-fit Universal And Import Coverage
- High-strength Fiberglass Braid Construction
PerTronix – 808412 Flame-Thrower Spark Plug Wires 8 cyl 8mm GM HEI Custom Fit Red (Part No.808412)
from
$72.99
8mm Custom fit MAGx2 wires are available for many popular applications equipped with Flame-Thrower or original GM HEI distributors. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cuttting, crimping and
Product Features:
See More
Product Features:
- PerTronix 808412 Flame-Thrower Spark Plug Wires 8 cyl 8mm GM HEI Custom Fit Red
- Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
PerTronix – 808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red (Part No.808415)
from
$81.99
8mm Custom fit MAGx2 wires are available for many popular applications equipped with Flame-Thrower or original GM HEI distributors. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cuttting, crimping and
Product Features:
See More
Product Features:
- PerTronix 808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red
- Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
PerTronix – 808317 Flame-Thrower Spark Plug Wires 8 cyl 8mm GM HEI Custom Fit Blue (Part No.808317)
from
$67.99
8mm Custom fit MAGx2 wires are available for many popular applications equipped with Flame-Thrower or original GM HEI distributors. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cuttting, crimping and
Product Features:
See More
Product Features:
- PerTronix 808317 Flame-Thrower Spark Plug Wires 8 cyl 8mm GM HEI Custom Fit Blue
- Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
PerTronix – 808480 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 180 Degree Red (Part No.808480)
from
$82.99
8mm Custom fit MAGx2 wires are available for many popular applications equipped with Flame-Thrower or original GM HEI distributors. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cuttting, crimping and
Product Features:
See More
Product Features:
- PerTronix 808480 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 180 Degree Red
- Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
PerTronix – 808210 Flame-Thrower Spark Plug Wires 8 cyl 8mm GM HEI Custom Fit Black (Part No.808210)
from
$72.99
8mm Custom fit MAGx2 wires are available for many popular applications equipped with Flame-Thrower or original GM HEI distributors. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cuttting, crimping and
Product Features:
See More
Product Features:
- PerTronix 808210 Flame-Thrower Spark Plug Wires 8 cyl 8mm GM HEI Custom Fit Black
- Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
PerTronix – 808409 Flame-Thrower Spark Plug Wires 8 cyl 8mm GM HEI Custom Fit Red (Part No.808409)
from
$67.99
8mm Custom fit MAGx2 wires are available for many popular applications equipped with Flame-Thrower or original GM HEI distributors. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cuttting, crimping and
Product Features:
See More
Product Features:
- PerTronix 808409 Flame-Thrower Spark Plug Wires 8 cyl 8mm GM HEI Custom Fit Red
- Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
ACDelco – Specific FitSpark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core (Part No.9608N)
from
$58.99
ACDelco Professional Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are a high quality replacement for many vehicles on the road today. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plugs. These premium aftermarket replacement components are manufactured to meet your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
NGK – NGK Wire Set (Part No.51398)
from
$32.49
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding
Product Features:
See More
Product Features:
- PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
- BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
- STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
- CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
DENSO – Spark Plug Wire Set: Carbon Core, 6 Wire Set (Part No.671-6024)
from
$63.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
- Identical OE end caps are designed to “click” into place for easy installation and a secure fit
- Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
NGK – NGK Wire Set (Part No.51369)
from
$39.99
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding
Product Features:
See More
Product Features:
- PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
- BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
- STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
- CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
Carquest Premium – Coil On Plug Insulator Boot Multi Pack, Spring included (Part No.38-009GMP)
from
$23.99
CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.
Product Features:
See More
Product Features:
- Provides excellent heat resistance as well as maximum protection against spark loss.
- Durable silicone compound for resistance to high heat or abrasion
- Spring included with the coil boot
- Design for direct compatibility
- OE design provides an exact fit for your application
- Multipack provides one time replace all COP for better deal
Carquest Premium – Coil On Plug Insulator Boot: Spring included, Designed for direct fit (Part No.35-7172)
from
$9.29
Coil On Plug Insulator Boot: Spring included, Designed for direct fit
Carquest Premium – Spark Plug Wire Set (Part No.35-6117)
from
$31.99
CARQUEST Premium wire sets are engineered to restore ignition wire reliability and performance. They are designed to meet or exceed OE design requirements and retain the original color, performance, fit, form and function of the OE wire.
Product Features:
See More
Product Features:
- SAE J2031 Class E cable resists heat, cold and electrical interference
- O.E./O.E.S. specified wire lengths
- O.E./O.E.S. specified insulators
- Limited lifetime warranty
MSD Ignition – Wire Set; Super Conductor; Small Block Chevy 350; HEI (Part No.31359)
from
$129.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.
Product Features:
See More
Product Features:
- Custom Fit For Make And Model Listed
- Wires Are Pre-Cut To Exact Specifications
- Bolt-on Performance
- Conductor core features DuPont Kevlar material for increased tensile strength
- Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
- Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
Prestolite – Prestolite Ignition Wire Set (Part No.F1020129358PST)
from
$32.09
The Prestolite carbon core wire set is resistant to fuels, oils and other under-hood chemicals and utilizes a stainless steel or zinc-plated steel for optimum strength, electrical conductivity, and corrosion resistance.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit for easy Installation.
- OE style connectors.
- Resistant to high temperatures, corrosion and vibration.
- Ignition noise suppressed. The Prestolite Ignition Wire Set features identical fit, function, color, and performance to OE.
Carquest Premium – Spark Plug Wire Set: 6 Wires, Increased performance, Designed for direct fit (Part No.35-6122)
from
$34.99
Product Features:
See More
- SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
- Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
- 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
- EPDM inner insulation stops power-robbing voltage leaks.
- With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
- Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
- Excellent interference suppression and consistent performance
- Easy lock terminals for more convenient installation.
- Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
- Broad coverage available for most vehicles on the road today
- Include grease pack to ensure easy installation and removal
NGK – NGK Wire Set (Part No.51355)
from
$32.49
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding
Product Features:
See More
Product Features:
- PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
- BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
- STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
- CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
NGK – NGK Wire Set (Part No.51025)
from
$34.49
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding
Product Features:
See More
Product Features:
- PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
- BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
- STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
- CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
Carquest Premium – Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit (Part No.35-6326)
from
$46.99
Product Features:
See More
- SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
- Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
- 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
- EPDM inner insulation stops power-robbing voltage leaks.
- With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
- Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
- Excellent interference suppression and consistent performance
- Easy lock terminals for more convenient installation.
- Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
- Broad coverage available for most vehicles on the road today
- Include grease pack to ensure easy installation and removal
Dorman – Help – Spark Plug Boot Adapters (Part No.49808)
from
$11.49
Worn spark plug boots causing rough idling and unpredictable power delivery? This quality spark plug boot is a direct replacement for the factory part to help restore proper engine performance caused by a damaged original boot.
Product Features:
See More
Product Features:
- Direct replacement – this spark plug boot matches the fit and function of the original part to restore proper engine performance
- Application-specific – validated to ensure trouble-free installation on specified years, makes and models
- Durable construction – manufactured from quality materials for long service life
- Trustworthy design – backed by 100 years of automotive aftermarket experience
Popular 1982 Chevrolet Malibu Ignition Wires Categories
1982 Chevrolet Malibu Ignition Wires
Maybe you’re in the middle of a full rebuild of that 1982 Chevrolet Malibu. Maybe you just need a couple of Ignition Wires. Either way, Advance Auto Parts has 17 different Ignition Wires in our inventory ranging from $32.49 to $181.99. That means you can find the exact parts or products you need to keep that 1982 Chevrolet Malibu running smoothly.
Ignition Wires are only as good as their brand. We stock 8 different brands to make sure you have plenty of trusted parts to choose from for your 1982 Chevrolet Malibu. Accel, MSD Ignition, and PerTronix are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Ignition Wires for your 1982 Chevrolet Malibu, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 37 reviews in this category, some of the top rated parts include Mallory Prosidewinder 135F Univ/Wire Set with 5.0 stars and Specific FitSpark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core with 4.5 stars.
So if you’re in the market for aftermarket Ignition Wires to keep your 1982 Chevrolet Malibu rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Ignition Wires Brands To Make Your 1982 Chevrolet Malibu Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1982 Chevrolet Malibu demands trusted brand parts and products to keep it running. Many trusted brands of Ignition Wires make up Advance Auto Parts’ inventory, and all are ready to help make your Malibu the best it can be. Be sure to browse some of our top Ignition Wires brands and parts.
Popular MSD Ignition Ignition Wires
We carry MSD Ignition parts in our stock across Optional Spark Plug Wires categories, plus more. For a 1982 Chevrolet Malibu, our most popular MSD Ignition Ignition Wires include:
Top 1982 Chevrolet Malibu Ignition Wires from Accel
Accel products are another trusted brand when it comes to Ignition Wires for your 1982 Chevrolet Malibu. Popular Accel parts include:
FAQs for 1982 Chevrolet Malibu Ignition Wires
What are the most purchased Ignition Wires for the 1982 Chevrolet Malibu?
Out of 17 Ignition Wires for the 1982 Chevrolet Malibu, the most popular in our inventory are:
from
$81.99
(1)
808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red
Optional Spark Plug Wires
from
$82.99
This product is not rated
808480 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 180 Degree Red
Optional Spark Plug Wires
from
$67.99
This product is not rated
808308 Flame-Thrower Spark Plug Wires 8 cyl 8mm GM HEI Custom Fit Blue
Optional Spark Plug Wires
What are the top-rated 1982 Chevrolet Malibu Ignition Wires?
Top-rated Ignition Wires for your 1982 Chevrolet Malibu based on customer reviews/ratings are:
from
$153.99
(2)
Mallory Prosidewinder 135F Univ/Wire Set
“Very high quality product for my show car. My car is a 1940 Ford Tudor Deluxe with a 1942 style ‘crab’ distributor. It still has the original engine t”
from
$58.99
(2)
Specific FitSpark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core
“Oem replacement works the best”
from
$133.99
(1)
Mallory Prosidewinder 90F Univ. Wire Set
“Good quality wires with low impedence. The Advance listing says to get part 669 if you have male terminal distributor cap. This is not needed – the ”
