1982 Buick Skyhawk Fuel and Emissions Systems

Name: Manifold Absolute Pressure Sensor (MAP)
Brand: Carquest Premium
SKU: ECE1303
Price: 63.99 USD

Below you will find various in-demand Buick Fuel and Emissions Systems, components and accessories for your 1982 Skyhawk. Advance Auto Parts has popular Skyhawk parts like Fuel Pumps, Fuel Injectors, Air Flow Sensors and more. You’ll also find aftermarket and OEM Fuel and Emissions Systems for other Skyhawk model years including 1979, 1980, 1983, 1984, 1985, 1986, 1987, 1988, 1989 and more. Select a category of 1982 Buick Skyhawk Fuel and Emissions Systems below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1982 Buick Skyhawk Fuel and Emissions Systems Categories

Fuel Tank Cleaning Kits

Gas Caps

Ambient Air Temperature Sensor Bolts

Fuel Pumps

Oxygen Sensors

Fuel Pump Block-Off Plate Gaskets

MAP-Barometric Pressures

Vacuum Reservoirs

Manifold Air Pressure Sensors

Fuel Injection Idle Air Control Valves

Electric Pump Filter and Strainers

Fuel Injector Seal Kits

Fuel Tank Lock Rings

Fuel Tank Filler Necks

Fuel Injector Connectors

Manifold Differential Pressure Sensors

Fuel Pump Tank Seals

Exhaust Check Valves

EGR Valve Gaskets

Fuel Cap Tester Adapters

Fuel Line Seal Rings

Fuel Injection Pressure Regulator Connector

Idle Air Control Motor Connector

Essential Fuel and Emissions Systems for 1982 Buick Skyhawks

from

$63.99

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

from

$201.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tanks meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
Lock ring included with each tank to reduce installation time and to ensure a complete repair
Made with corrosion resistant, OE approved, Ni Terne steel for durability
Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
Each new fuel tank is road tested to ensure real world performance and to verify that each design meets our high standards for quality
Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
Packaged with double-layered foam wrap and heavy-gauge corrugated board to ensure product quality at installation

from

$1.49

These nuts are manufactured using durable materials and corrosion tested to ensure required strength and Longevity.

Product Features:

Durable materials – manufactured to specific thread tolerance standards
Corrosion tested – hardware undergoes salt spray testing to ensure corrosion resistance
Multipurpose usefulness – can be used in a variety of applications, from auto to home
Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States

from

$169.99

The Evaporative Emission System is designed to control fuel vapors in the vehicle fuel storage system to prevent any release of fuel vapors into the atmosphere. In a normally operating system, released vapors from the fuel storage tank will be directed into an on-board charcoal canister via a piping system and control valves. Under the most ideal engine operating condition, the vapors will be pulled into the engine to be burned during the normal combustion process.

Product Features:

Application matched components ensure the vehicle will be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Features application specific mounting bracket and accessories as the dealer purchased part provides ease of installation.
Canister carbon volumn equal to original equipment providing maximum hydrocarbon emission control.

from

$96.99

Carquest Premium exhaust gas recirculation (EGR) valves are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Our Carquest Premium EGR valves are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium EGR valves undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium EGR valves are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
Precision engineering and robust design to withstand harsh under hood environment
Gaskets or seals are included if required for installation
Extensive design validation testing and 100% end-of-line tested
Where applicable stainless-steel sleeves used over cold rolled sleeves providing smooth EGR pintle operation under all operating conditions.
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$140.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank filler necks meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
Unit is dual coated for enhanced corrosion protection
Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
Tested with OE fuel cap to prevent evaporative emission and check engine light failure

from

$39.99

The Secondary Air Injection system is an emission control device designed to pump fresh air into the engine exhaust system to reduce harmful emissions. The Air Injection Pump Check Valve will allow air flow in one direction only to prevent an engine back-fire condition.

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$55.99

The Idle Air Control valve is an electronic device used by the engine control module (ECM) to control engine idle speed. The control valve will be mounted in the throttle body on the engine and allows air to bypass the throttle plate during a closed throttle condition. The valve is also used on many applications to control vehicle speed when the vehicle cruise control is engaged, the ECM will allow air to bypass the throttle plate while monitoring vehicle speed and other signal inputs.

Product Features:

Robust design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Precision-wound coated copper windings increase product durability and life cycle.
Application matched to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% end-of-line tested to ensure confidence and product reliability.

from

$19.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$12.49

When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:

Helps avoid premature fuel pump failure
Lint free towel included
Low suds formulation
Removes harmful contaminants from the fuel tank

from

$67.99

CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:

Each unit is 100% tested to OE specifications
Includes new O-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$16.99

Carquest Premium fuel pump tank seals are built by Carter Fuel Systems and Agility Auto Parts, industry leaders in high-quality fuel system components. Carquest Premium offers a complete line of fuel pump tank seals covering a wide variety of North American vehicle applications. Carquest Premium fuel pump tank seals are engineered to meet or exceed all OEM specifications.

Product Features:

Engineered to meet or exceed all OEM specifications.
Precision stamped and are treated with a rust proof finish to ensure durability and strength

from

$67.99

Carquest Premium idle air control valves are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Idle air control valves, or sometimes known as idle air motors, are used to maintain the engine speed at idle by precisely adjusting the amount of air allowed to enter the intake. Our Carquest Premium idle air control (IAC) valves are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium idle air control valves undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium idle air control valves are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
Precision engineering and robust design to withstand harsh under hood environment
Gaskets or seals are included if required for installation
Extensive design validation testing and 100% end-of-line tested
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$72.99

Carquest Premium electric fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$9.99

CARQUEST Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our CARQUEST Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. CARQUEST Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$17.79

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$56.99

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

from

$3.49

GM Genuine Parts Multi Purpose Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$43.99

Pigtail connector allows replacement of damaged fuel injector connector.

from

$8.29

This HVAC control duct hose is designed to match the fit and function of the original hose on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this HVAC control duct hose is designed to match the fit and function of the original hose on specified vehicles
Restores functionality – reliable replacement for an original hose that has failed due to heat or vibration
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$77.99

Delphi’s ever growing portfolio of high quality vehicle sensors are backed by stringent OE development and product validation methods. We offer a wide range of sensors, including ABS, camshaft, crankshaft, knock, EGT, MAP, temperature, throttle position, and vehicle speed sensors for a variety of vehicle applications. All of our sensors are tested and calibrated to OE standards, ensuring accurate readings, which helps to reduce comebacks.

Product Features:

Insulated with silicone gel over the integrated circuit chip to protect against shock and vibration for increased durability
Internally protected against moisture intrusion and vibration
Long lasting and durable
Designed and engineered with Delphi expertise

from

$12.99

CARQUEST premium gasket kit includes necessary gasket and seals to reseal both single and dual style throttle body fuel injector(s). Includes injector o-rings and steel back up rings. Includes single and dual throttle body housing gasket and fuel port gasket.

from

$31.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$3.29

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$39.99

NGK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

OEM QUALITY: is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$27.99

This vacuum reservoir is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this vacuum reservoir is designed to match the fit and function of the original part on specified vehicles
Ideal solution – this reservoir is a reliable replacement for an original part that is missing or damaged
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$14.99

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$9.99

CARQUEST lock rings are designed to positively seat the fuel pump in proper position inside the tank. These precision stamped rings are made from corrosion-resistant and durable metals for long life.

Product Features:

Precision stamped for perfect fit and pump position
Always replace lock ring as a part of fuel pump service

Upgrade your 1982 Buick Skyhawk with Top-Quality Fuel and Emissions Systems

When it comes to maintaining or upgrading your 1982 Buick Skyhawk, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Buick or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your Skyhawk functioning at its best. At Advance Auto Parts, we offer a wide selection of 59 Fuel and Emissions Systems for the 1982 Buick Skyhawk, designed to meet your needs without breaking the bank. From Fuel Pump replacements to Fuel Injectors upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 1982 Buick Skyhawk at great prices. Our Fuel and Emissions Systems inventory for this model ranges from just $1.29 to $246.99, with an average price of $35.30. Our 59 Fuel and Emissions Systems in stock come from 11 trusted brands, so you’re sure to find the right part for your 1982 Buick Skyhawk without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1982 Buick Skyhawk, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names like Bosch, Carquest Premium, Dorman, and more. Bosch Fuel and Emissions Systems start at just $32.99 and boast an impressive 4.7 stars average rating from customers. Carquest Premium and Dorman also bring quality to the table, with Fuel and Emissions Systems available starting at $7.29, and at an average 4.4 stars rating. With 2,270 customer reviews and counting, our 1982 Buick Skyhawk Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1982 Buick Skyhawk is always ready to roll. We’re committed to providing you with everything you need to keep your Skyhawk in top shape, all in one place. Start shopping confidently below for your 1982 Buick Skyhawk!

Best-Selling Fuel Pumps for 1982 Buick Skyhawks

Enhance the driving experience in your Buick with 7 quality Fuel Pump components, starting at $3.99.

show more show less

from

$3.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$79.99

Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Delphi pumps are designed to operate under extreme temperatures with quick engine starts
Improved pump performance as a result of Delphi’s innovative design and durability
Restores fast pressure performance and system integrity, translating to better pumping through less energy
Part is validated, tested and matched to the right vehicle application
Lower amperage draws less load on vehicle’s electrical system
Always be sure to check and clean fuel tank to avoid unnecessary returns
Always replace the fuel strainer when doing a fuel pump repair

from

$13.99

Filtration performance meets or exceeds OE requirements
Micron rating meets or exceeds OE requirements
OE replacement strainer designed for use with Delphi electric fuel pumps
Replacing the strainer is always recommended when replacing a fuel pump

from

$9.99

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$29.99

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$34.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$17.79

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

Top Picks for 1982 Buick Skyhawk Air Flow Sensors

Upgrade Buick Skyhawks with top-quality Air Flow Sensors parts, including 4 OEM and aftermarket selections for your 1982 model.

show more show less

from

$68.99

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

from

$73.99

Building upon a foundation of premium full-line products established under NGK ignition and oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. is the only OE supplier with a full line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

The Manifold Absolute Pressure Sensor (MAP) provides manifold pressure information to the Engine Control Unit (ECU). The data is used to determine the air mass flow rate and required fuel for optimum combustion and ignition timing.
NTK’s Manifold Absolute Pressure Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper manifold pressure, fuel metering and ignition timing.

from

$1.49

These nuts are manufactured using durable materials and corrosion tested to ensure required strength and Longevity.

Product Features:

Durable materials – manufactured to specific thread tolerance standards
Corrosion tested – hardware undergoes salt spray testing to ensure corrosion resistance
Multipurpose usefulness – can be used in a variety of applications, from auto to home
Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States

from

$56.99

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

In-Demand Oxygen Sensors for 1982 Buick Skyhawks

Select from 7 premium Oxygen Sensors parts for your 1982 Buick Skyhawk, with prices ranging from $32.99 to $59.99.

show more show less

from

$45.99

DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity; DENSO gives you the right part and the right fit, the first time.

Product Features:

Specifically designed to meet the increasing demands of today’s engines
100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$32.99

Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Direct Fit includes OE Connector for easy installation
Performance meets or exceeds OE specifications
True Direct-fit OE connectors and harness

from

$39.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Direct Fit includes OE Connector for easy installation
Performance meets or exceeds OE specifications
True Direct-fit OE connectors and harness

from

$39.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Includes Smart Link Connector, no soldering required
No special tools required for installation
Seared protection tube due to 100% functional quality test
Performance meets or exceeds OE specifications

from

$39.99

OEM QUALITY: is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$59.99

NGK is the sensor specialist for import and domestic applications. Established under the NGK product family, oxygen sensors are part of our ongoing commitment to streamlining product types and increasing coverage. A ceramic company at our core, uses cutting-edge technology to control the ceramic used in our oxygen sensors from raw material to finished product. is the world’s largest supplier and manufacturer of OE oxygen sensors. Combining expertise and innovation, oxygen sensors deliver superior fit, form, and function. oxygen sensors undergo extensive testing during manufacturing to ensure quality and reliability that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for comprehensive market support and OE application technology.

Product Features:

OEM QUALITY: is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$43.99

Specifically designed to meet the increasing demands of today’s engines
100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

Most Sold 1982 Buick Skyhawk Gas Caps

Explore our best-selling Buick parts for the 1982 Skyhawk among 13 OEM and aftermarket options starting from $7.99.

show more show less

from

$11.99

Passes all state and federal emissions tests
Independently tested for emission control
Independently tested for emission control
Protects your fuel from theft and vandalism
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$14.99

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$9.99

Product Features:

Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$15.99

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$24.99

Protects your fuel from theft and vandalism
Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$16.99

Product Features:

Passes all state and federal emissions tests
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$23.99

Product Features:

Protects your fuel from theft and vandalism
Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$21.79

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$22.99

Product Features:

Protects your fuel from theft and vandalism
Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$7.99

Passes all state and federal emissions tests
Independently tested for emission control
Independently tested for emission control
Protects your fuel from theft and vandalism
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$24.29

Come pre-assembled for quick and easy installation.
Several fastener options to work with any fuel cap compartment configuration
Fits vehicles orginally equipped with tether
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$11.79

Passes all state and federal emissions tests
Independently tested for emission control
Independently tested for emission control
Protects your fuel from theft and vandalism
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$10.99

Passes all state and federal emissions tests
Independently tested for emission control
Independently tested for emission control
Protects your fuel from theft and vandalism
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

Top-Rated Fuel and Emissions Systems Brands For Your 1982 Buick Skyhawk

Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 1982 Buick Skyhawks. Below you’ll find some of our best rated Fuel and Emissions Systems from Bosch, Carquest Premium, and Dorman, and more. Fuel and Emissions Systems from these brands that fit a 1982 Skyhawk start at just $7.29 and are rated as high as 4.7 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.

Popular Bosch 1982 Buick Skyhawk Fuel and Emissions Systems

When it comes to maintaining or upgrading your 1982 Buick Skyhawk, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. Bosch ticks all of those boxes. We offer a wide selection of Bosch Fuel and Emissions Systems, specifically designed for the 1982 Buick Skyhawk. With over 3 Bosch brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $32.99, with an average price of just $37.66. Plus, with over 203 customer reviews and an average rating of 4.7 stars, you can trust that our Bosch Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $39.99

(31)

Oxygen Sensor: 1 Wire, 5.31" Long, Non-heated, Universal Fit

“Works great in my 1997 Saturn SL2. No more P0133 error codes.”

from $32.99

(43)

Oxygen Sensor: 1 Wire, 14.57" Long, Non-heated, Exact Fit

“Good quality”

from $39.99

(129)

Oxygen Sensor: 2 Wire, 12.48" Long, Non-heated, Exact Fit

“Keeps the CEL off.”

Popular Carquest Premium 1982 Buick Skyhawk Fuel and Emissions Systems

Carquest Premium auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 1982 Buick Skyhawk owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 1982 Skyhawk, Advance Auto Parts carries a full inventory of 3 Carquest Premium Fuel and Emissions Systems. Plus you will be keeping your Buick in peak condition while saving money because prices on these Carquest Premium Fuel and Emissions Systems range from $11.99 to $59.99, plus, with more than 42 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.

from $59.99

(2)

Remanufactured T/B Fuel Injector

“They’re a little noisy but overall I have increased horsepower and torque I love this product”

from $14.99

(37)

Fuel Cap: Round, Direct Fit, Provides Tight Seal, 1 Pack

“Motorhome”

from $11.99

(3)

Keyed Alike Locking Fuel Cap

“Worked fine”

FAQs for 1982 Buick Skyhawk Fuel and Emissions Systems

Which Fuel and Emissions Systems are best-sellers for 1982 Buick Skyhawks?

Out of 59 Fuel and Emissions Systems that fit 1982 Buick Skyhawks, the following parts are the top sellers:

Fuel Cap: Round, Direct Fit, Provides Tight Seal, 1 Pack (18481528) – $14.99
Non-Locking Tethered Fuel Tank Cap (12102600) – $24.29
Fuel Pump Mounting Gasket (5183804) – $3.99

What’s the price range for 1982 Buick Skyhawk Fuel and Emissions Systems?

Fuel and Emissions System prices for the 1982 Buick Skyhawk start at $1.29 and go up to $246.99 for the most premium parts.

What’s the average price of a Fuel and Emissions System for a 1982 Buick Skyhawk?

The average price for Fuel and Emissions Systems for the 1982 Buick Skyhawk is $35.30. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Fuel and Emissions Systems for other Buick Skyhawk model years?

Yes, we currently carry Fuel and Emissions Systems for 12 model years of Buick Skyhawks between 1975 and 1989. Fuel and Emissions Systems are bought most frequently for the following model years: 1989, 1988, 1987, 1986, 1985, 1984, 1983, 1980, and 1979.

What are the cheapest Fuel and Emissions Systems for my 1982 Buick Skyhawk?

The cheapest 1982 Buick Skyhawk Fuel and Emissions Systems we carry in stock are:

Exhaust Gas Recirculation (EGR) Valve Gasket (12482002) – $1.29
Body Bolt with Washer – M6-1.0 X 25mm (sold by each) (22141637) – $1.49
Exhaust Gas Recirculation (EGR) Valve Gasket (3207897) – $3.29
Fuel Feed Pipe O-Ring (15730384) – $3.49
Fuel Pump Mounting Gasket (5183804) – $3.99

What types of Fuel and Emissions Systems do you sell for my 1982 Buick Skyhawk?

As of 3/1/26, these are some of the most in-demand types of Fuel and Emissions Systems for a 1982 Buick Skyhawk:

Can I get help with 1982 Buick Skyhawk Fuel and Emissions System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Buick Fuel and Emissions Systems and more.

What is your return policy for Buick Skyhawk Fuel and Emissions Systems?

Advance Auto Parts keeps returns simple. For new Buick Skyhawk Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1982 Buick Skyhawk Fuel and Emissions Systems

Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECE1303)

Spectra Premium – Fuel Tank (Part No.GM17B)

Dorman – Body Bolt with Washer – M6-1.0 X 25mm (sold by each) (Part No.700-251)

Carquest Premium – Vapor Canister (Part No.CPG1187)

Carquest Premium – EGR Valve (Part No.EGC1492)

Spectra Premium – Fuel Filler Neck (Part No.FN556)

Carquest Premium – Secondary Air Injection Pump Check Valve (Part No.CVC1001)

Carquest – Idle Air Control Valve (Part No.76A1001)

Carquest Premium – Multi-Use Connector (Part No.PTA1437)

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Carquest Premium – Remanufactured T/B Fuel Injector (Part No.A115-1013)

Carquest Premium – Fuel Tank Lock Ring (Part No.LO1582931)

Carquest Premium – Idle Air Control Valve (Part No.ABA1633)

Carquest Premium – Fuel Pump: Includes Wiring Harness (Part No.E219655)

Carquest Premium – Fuel Pump Strainer (Part No.FS260354)

Carquest Premium – Fuel Cap Tester Adapter: (Part No.12410)

Carquest Premium – New Map Sensor (Part No.ECE1278)

GM Genuine Parts – Fuel Feed Pipe O-Ring (Part No.217-452)

Carquest Premium – Fuel Injector Connector (Part No.AC761)

Dorman – Help – Carburetor Pre-Heater Hose – 1-3/4 In. x 18 In. – Aluminum (Part No.96022)

Delphi – Manifold Absolute Pressure Sensor (Part No.PS10075)

Carquest Premium – Throttle Body Gasket Kit (Part No.AS099)

Carquest Premium – Multi-Use Connector (Part No.ABA3465)

Felpro – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.70950)

NTK – Direct Ignition Coil on Plug Boot: Premium Silicone (Part No.21002)

Dorman – Help – Vacuum Storage Canister (Part No.47076)

Carquest Premium – Fuel Cap: Round, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10837)

Carquest Premium – Fuel Tank Lock Ring (Part No.LR3000)

Felpro – Fuel Pump Mounting Gasket (Part No.6579)

Delphi – Electric Fuel Pump: Hose Clamps, Isolator, Splices, Isolator, 2-Wire Harness (Part No.FE0115)

Delphi – Fuel Pump Strainer (Part No.FS0177)

Carquest Premium – Fuel Pump Strainer (Part No.FS260335)

Carquest Premium – Fuel Pump: Includes Wiring Harness (Part No.E219662)

Carquest Premium – Fuel Cap Tester Adapter: (Part No.12427)

Carquest Premium – Fuel Cap Tester Adapter: (Part No.12410)

Carquest Premium – Remanufactured T/B Fuel Injector (Part No.A114-1193)

Dorman – Help – Carburetor Pre-Heater Hose – 1-3/4 In. x 18 In. – Aluminum (Part No.96022)

Carquest Premium – Fuel Injector Connector (Part No.AC761)

Carquest Premium – Multi-Use Connector (Part No.ABA3464)

Carquest Premium – Throttle Body Gasket Kit (Part No.AS099)

Carquest Premium – New Map Sensor (Part No.ECE1015)

NTK – Manifold Absolute Pressure Sensor (Part No.MA0089)

Dorman – Body Bolt with Washer – M6-1.0 X 25mm (sold by each) (Part No.700-251)

Carquest Premium – New Map Sensor (Part No.ECE1278)

DENSO – Oxygen Sensor: 2 Wire, 11.77" Long, Not Heated, Universal Fit (Part No.234-2000)

Bosch – Oxygen Sensor: 1 Wire, 14.57" Long, Non-heated, Exact Fit (Part No.12014)

Bosch – Oxygen Sensor: 2 Wire, 12.48" Long, Non-heated, Exact Fit (Part No.12028)

Bosch – Oxygen Sensor: 1 Wire, 5.31" Long, Non-heated, Universal Fit (Part No.11027)

NTK – Direct Ignition Coil on Plug Boot: Premium Silicone (Part No.21002)

NTK – Switching Oxygen Sensor: 2 Wire, 13.75" Long, Non-Heated, Direct Fit (Part No.21553)

DENSO – Oxygen Sensor: Upstream, 2 Wire, 14.80" Long, Not Heated, Exact Fit (Part No.234-2001)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17591)

Carquest Premium – Fuel Cap: Round, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10837)

Carquest Premium – Non-Locking Fuel Tank Cap (Part No.10834)

Carquest Premium – Gas Cap: Twist On, Reduces Air Pollution, 1 Pack (Part No.10817)

Carquest Premium – Locking Fuel Tank Cap (Part No.10501)

Carquest Premium – Non-Locking Fuel Tank Cap (Part No.10819)

Carquest Premium – Locking Fuel Tank Cap (Part No.10591)

Carquest Premium – Locking Fuel Cap: Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10504)

Carquest Premium – Locking Fuel Tank Cap (Part No.10507)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17504)

Motorad – Non-Locking Tethered Fuel Tank Cap (Part No.MGC817T)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17507)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17505)