1981 Volkswagen Vanagon Body Parts
More 1981 Volkswagen Vanagon Body Parts Categories
If you’re looking for an original Body Parts replacement for a 1981 Volkswagen Vanagon, you can search through our selection below. You’ll also find aftermarket and OEM Body Parts to meet your needs.
Essential 1981 Volkswagen Vanagon Body Parts
StrongArm – Liftgate Lift Support: 20.17" Ext Length, 8.0" Travel, 139 Lbs of Force, 1 Pk (Part No.D6247)
from
$50.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.
Product Features:
See More
Product Features:
- Heavy Gauge Steel Body
- Self-Cleaning Piston Assembly
- Rubber O-Ring Piston Seal
- Non-Stick Back-Up Ring
- Hardened Nitride Plated Steel Shaft
- Engineered In USA To OE Quality Standards For Performance And Durability
- IATF 16949, ISO 9001 Certified; Passes Extensive Quality Checks And Testing
- Easy To Install In Just Minutes. No Special Tools Required.
- Exact Fit Original Equipment Design Guarantees Correct Fit And Function
- Consistent Performance In All Weather Conditions
- Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
- Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle
Atlas Lift – Lift Support (Part No.LS10243)
from
$27.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!
Product Features:
See More
Product Features:
- Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
- Easy Install – Less than 15 Minutes! based on average install time across all parts
- No Special Tools Required
- Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
- OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
- OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
- World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
- Trilingual Install Instructions provided inside each package
Stabilus – Gas Charged Hatch Strut (Part No.O207018736STB)
from
$31.74
STABILUS gas-charged lift supports make it easy and safe to raise and lower heavy hoods, rear hatches and tailgates by hand. Compact design, high functional comfort and integrated operating safety expand the range of applications for STABILUS products in utility vehicle design. As the world’s leading manufacturer of lift supports, STABILUS can provide exact replacements for practically any application where a lift support is used.
Product Features:
See More
Product Features:
- Restores the original opening and closing speeds of your hood, hatch or trunk
- Easy-to-install
- No special tools required
- Engineered for your application
- Easy lifting and reduced closing effort
- Consistent lifting force through 50,000 cycles
- Rust-resistant piston rod extends product life
- Dynamic damping technology, available on select lift supports
StrongArm – Liftgate Lift Support: 20.17" Ext Length, 8.0" Travel, 112 Lbs of Force, 1 Pk (Part No.D4633)
from
$20.79
Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.
Product Features:
See More
Product Features:
- Exact fit original equipment design guarantees correct fit and function
- Engineered and built to meet or exceed original equipment quality standards
- Individually tested for performance and reliability
- Hardened, nitride plated steel shaft provides optimal durability
- Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
- Heavy gauge steel body is electrostatically painted and heat cured to OE specs
- Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
- Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
- No special installation tools required
- Consistent Performance In All Weather Conditions
- Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
- Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle
K-Source – Replacement Glass (Part No.99127)
from
$10.99
Replacement Glass for 80-92 Vanagon (foldaway)
Product Features:
See More
Product Features:
- The glass measures 5 5/16″ inches tall by 7 1/2″ inches wide and 8 1/2″ inches diagonally.
- Glass fits mirrors with power functions only.
- Step-by-step instructions for easy installation
- Mounting tape included for low-hassle stick-on installation
- Most economical way to replace cracked mirror glass versus the entire mirror housing
- Flat
Burco – Side View Replacement Mirror (Part No.2260)
from
$39.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!
Product Features:
See More
Product Features:
- Made in USA
- Exact Fit
- Safety Smooth Edges
- Replaces OE Mirror
- Premium Mirror Glass
- Break-Free Guarantee
- Instructions Included
Burco – Side View Replacement Mirror (Part No.2232)
from
$34.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!
Product Features:
See More
Product Features:
- Made in USA
- Exact Fit
- Safety Smooth Edges
- Replaces OE Mirror
- Premium Mirror Glass
- Break-Free Guarantee
- Instructions Included
Dee Zee – 11"X 19 Inch, Set of 2, Rectangle With Radius Notch, Aluminum, Screw On (Part No.DZ1808)
from
$39.49
Dee Zee Flaps Protect your vehicle and trailer from rocks and messy conditions. Wider than most brands for maximum protection. Constructed of powder coated Brite-Tread aluminum.
Product Features:
See More
Product Features:
- Protect Your Vehicle And Trailer From Rocks And Messy Conditions
- Classic Diamond Style Design
- Protected By A BriteGard Powder Coat Finish
- Compliment Brite-Tread Running Boards
Dee Zee – Multi-Fit, 11" X 18", Set Of 2, Contoured Rectangle, Composite Material (Part No.DZ17939)
from
$28.49
Dee Zee Flaps Protect your vehicle and trailer from rocks and messy conditions. Wider than most brands for maximum protection. Black Composite material fits any truck, van or SUV. Universal 11 Inch X 15 Inch Notched 1 pair front or rear flaps and mounting hardware. The road can be a scary place for your vehicle. Rocks, sticks and other debris can wreak havoc on your finish and cause hundreds or even thousands of dollars worth of damage.
Product Features:
See More
Product Features:
- Protect Your Vehicle And Trailer From Rocks And Messy Conditions
- Universal Fitting
- Easy No Drill Installation
- Perfect Compliment Nerf Bars
Dorman – Window Crank Handle (Part No.O3070320437DOR)
from
$9.10
Dorman’s Window Crank Handles are made of durable metal or plastic to withstand years of use.
Product Features:
See More
Product Features:
- Comes with necessary hardware for a complete repair (where applicable)
- Available in a variety of colors and finishes, including chrome
- Easy to install
- Available for front and rear driver and passenger sides
K-Source – Mirror Assembly: Driver Side, Manual Adjustment, Foldable, 1 Pk (Part No.72002V)
from
$35.99
Original Equipment Manufacturer Style Replacement Side View Mirror. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.
Product Features:
See More
Product Features:
- Driver side Mirror, tested to fit and function like the original, Meets or exceeds Original Equipment Manufacturer standards
- Mirror glass to be adjusted by hand
- Manual folding for additional clearance
- Black
- Superior material and manufacturing process ensures the highest quality possible
K-Source – Mirror Assembly: Passenger Side, Manual Adjustment, Foldable, 1 Pk (Part No.72001V)
from
$35.99
Original Equipment Manufacturer Style Replacement Side View Mirror. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.
Product Features:
See More
Product Features:
- Passenger side Mirror, tested to fit and function like the original, Meets or exceeds Original Equipment Manufacturer standards
- Mirror glass to be adjusted by hand
- Manual folding for additional clearance
- Black
- Superior material and manufacturing process ensures the highest quality possible
Popular 1981 Volkswagen Vanagon Body Parts Categories
1981 Volkswagen Vanagon Body Parts
You count on your 1981 Volkswagen Vanagon to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Body Parts. With 10 Body Parts ranging in price from $9.10 to $39.99, you’re sure to find everything you need for your 1981 Volkswagen Vanagon.
Brands matter. If you want to shop a specific Body Parts brand, we stock 6 different brands like Dee Zee, K-Source, and Burco. 1981 Volkswagen Vanagon Body Parts start as low as $9.10!
One of the best ways to find top quality OEM or aftermarket Body Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 6 extensive product reviews on 1981 Volkswagen Vanagon Body Parts.
Did we mention you can order your Body Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Body Parts inventory for your 1981 Volkswagen Vanagon below to get started!
Top-Rated Body Parts Brands For Your 1981 Volkswagen Vanagon
Trusted Body Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1981 Volkswagen Vanagon running right for years to come. In our inventory you’ll find brands like Dee Zee, K-Source, Burco, and even more.
Popular K-Source Body Parts
You’ll find popular K-Source brand products across Vehicle Mirrors. All are waiting to get your 1981 Volkswagen Vanagon back on the road. Some of the top-rated K-Source products in these categories are:
Top-Rated Body Parts
If are what you’re looking for, our inventory holds plenty. We stock brand Body Parts for your 1981 Volkswagen Vanagon, and some of our most reviewed parts include:
from
$28.49
(1)
Multi-Fit, 11" X 18", Set Of 2, Contoured Rectangle, Composite Material
Splash Guard (Mud Flap)
FAQs for 1981 Volkswagen Vanagon Body Parts
What are the most purchased Body Parts for the 1981 Volkswagen Vanagon?
Out of 10 Body Parts for the 1981 Volkswagen Vanagon, the most popular in our inventory are:
from
$39.49
This product is not rated
11"X 19 Inch, Set of 2, Rectangle With Radius Notch, Aluminum, Screw On
Splash Guard (Mud Flap)
from
$35.99
This product is not rated
Mirror Assembly: Passenger Side, Manual Adjustment, Foldable, 1 Pk
Custom Mirrors
