1981 Lincoln Mark VI Differentials

Essential 1981 Lincoln Mark VI Differentials

FAG US – CONE (Part No.KLM603049)

CONE

from

$23.79
CONE

Dorman – Rear Axle Shaft, Left or Right (Part No.630-209)

Rear Axle Shaft, Left or Right

from

$258.99
Axle shaft damaged or bearings worn out? This axle shaft directly replaces the original equipment on certain vehicles, complete with all necessary application-specific installation components.

Product Features:
  • Direct replacement – this axle shaft replaces the original equipment on specific vehicle years, makes and models.
  • Complete kit – each shaft includes critical installation hardware and components needed for specific vehicle applications.
  • Durable construction – designed to rigorous standards and tested to ensure performance
  • Trustworthy solution – backed by team of engineers and quality control specialists in the United States
See More

Motive Gear – Differential Gear Install Kit (Part No.F8.8IK)

Differential Gear Install Kit

from

$35.99


Product Features:
  • MINI INSTALL KIT FORD 8.8
See More

Driveworks – Oil Seal (Part No.S-3604)

Oil Seal

from

$4.79
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

The Carrier Bearing Puller

from

$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
See More

Yukon Gear – Standard Open Spider Gear Kit For 8.8" Ford With 31 Spline Axles (Part No.16021)

Standard Open Spider Gear Kit For 8.8" Ford With 31 Spline Axles

from

$299.99
Yukon standard open spider gear kit for 8.8″ Ford with 31 spline axles and 7/8″ pin. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Spider gear kit
  • Fits Ford 8.8″ with 31 spline axles
  • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
  • 0.875″ cross pin shaft diameter
See More

Yukon Gear – 3 Qt – 80W90 Conventional Gear Oil With Posi Additive (Part No.15003)

3 Qt - 80W90 Conventional Gear Oil With Posi Additive

from

$57.99
3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.

Product Features:
  • Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive
See More

Motive Gear – Differential Ring and Pinion (Part No.F8.8-327)

Differential Ring and Pinion

from

$235.99


Product Features:
  • FRD 10BL 8.8 R/P 3.27 MG
See More

Yukon Gear – Cross Pin Bolt (Part No.33067)

Cross Pin Bolt

from

$6.99
Cross pin bolt for Chrysler 8.25″, 9.25″ rear, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 7.2″ IFs, 7.5″, 7.6″, 8.0″, 8.25″ IFS & 8.5″.

Product Features:
  • Cross pin bolt for Chrysler 8.25″ and 9.25″ rear, Ford 7.5″ and 8.8″, GM 12 botl car and truck, 8.5″, 8.25″ IFS, 8.0″, 7.625″, 7.5″ and 7.2″ IFS
See More

Yukon Gear – Mini Spool For Ford 8.8" With 28 Spline Axles (Part No.32225)

Mini Spool For Ford 8.8" With 28 Spline Axles

from

$218.99
Mini spools are a low-cost traction option for vehicles looking for full-time lockup. The mini spool installs into a standard open carrier and give 100% power to both tires at all times. These units are not recommended for street-driven vehicles. We recommend full spools for vehicles with large tires or high horsepower. These units come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Ford 8.8″ with 28 spline axles
  • Provides 100% traction to both wheels at all times
  • Installs into standard open carrier case
See More

Yukon Gear – Standard Open Carrier Case & Spiders, Ford 8.8", 31 Spline (Part No.20070)

Standard Open Carrier Case & Spiders, Ford 8.8", 31 Spline

from

$404.99
Product Features:
  • Standard open carrier case and spiders
  • Fits Ford 8.8″ with 31 spline axles
See More

Yukon Gear – Side Gear And Thrust Washer (0.750" Shaft) For 8.8" Ford (Part No.33298)

Side Gear And Thrust Washer (0.750" Shaft) For 8.8" Ford

from

$6.99
Side gear thrust washer (0.750″ shaft) for 8.8″ Ford.

Product Features:
  • Side gear thrust washer for Ford 8.8″
  • 0.750″ diameter cross pin shaft applications only
See More

Pro-King – Differential Internal Nest Kit (Part No.761A717)

Differential Internal Nest Kit

from

$309.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Dorman – Differential Clutch Kit (Part No.697-780)

Differential Clutch Kit

from

$262.99
This differential disc kit is a low-cost, time-saving repair solution for the posi-traction function. They are designed to match the fit and performance of the original disc on specific vehicle years, makes and models.

Product Features:
  • Direct replacement – this differential clutch kit provides the necessary components for repairing the original equipment on specific vehicles.
  • Quality materials – all components are built for reliable longevity and performance.
  • Smart solution – provides original equipment fit and function for a competitive price compared to original manufacturer
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

Pro-King – Differential Clutch Pack (Part No.762B119)

Differential Clutch Pack

from

$133.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Trao Loc Spring For Ford 8.8", 28 Spline (Part No.33515)

Trao Loc Spring For Ford 8.8", 28 Spline

from

$63.99
Product Features:
  • Trac Loc spring
  • Fits 28 spline Ford 8.8
See More

Yukon Gear – Trac Loc Positraction, Ford 8.8", 31 Spline, With Carbon Fiber Clutches (Part No.20130)

Trac Loc Positraction, Ford 8.8", 31 Spline, With Carbon Fiber Clutches

from

$774.99
Yukon Trac Loc positraction, Ford 8.8″, 31 spline, with Carbon Fiber clutches.

Product Features:
  • Trac Loc positraction carrier case
  • Includes spider gears
  • Fits Ford 8.8″ with 31 spline axles
  • Carbon fiber clutches
See More

Dorman – Differential Pinion Yoke Assembly (Part No.697-532)

Differential Pinion Yoke Assembly

from

$176.99
Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

Product Features:
  • Direct replacement – this differential end yoke matches the fit and construction of the original yoke.
  • Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts.
  • Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
  • Validated fit – this differential end yoke has been tested to confirm accurate fit
See More

Yukon Gear – Pinion Gear And Thrust Washer (0.875" Shaft) For 8.8" Ford (Part No.33299)

Pinion Gear And Thrust Washer (0.875" Shaft) For 8.8" Ford

from

$11.99
Pinion gear thrust washer (0.875″ shaft) for 8.8″ Ford.

Product Features:
  • Pinion gear thrust washer for Ford 8.8″
  • 0.875″ diameter cross pin shaft applications only
See More

Yukon Gear – Set Up Bearing (Part No.56045)

Set Up Bearing

from

$153.99
M802048 set-up bearing (one bearing). No return.

Product Features:
  • Set up bearing
  • Fits M802048 pinion bearing
  • Easily slips on and off pinion journal to allow for easier pinion depth adjustment
See More

Yukon Gear – Bearing Race Driver (Part No.56020)

Bearing Race Driver

from

$215.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits M802011 race
  • All steel construction
See More

Pro-King – Differential Ring Gear Bolt (Part No.761A935)

Differential Ring Gear Bolt

from

$0.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – 7.5" Ford Cover Gasket (Part No.23009)

7.5" Ford Cover Gasket

from

$9.99
7.5″ Ford cover gasket.

Product Features:
  • Cover gasket
  • Fits Ford 7.5″
See More

Yukon Gear – 8.5" & 8.2" GM Carrier Installation Kit (Part No.57008)

8.5" & 8.2" GM Carrier Installation Kit

from

$109.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for GM 8.2″ & 8.5″ differential. This kit contains carrier bearings, races and shims.

Product Features:
  • Fits GM 7.5″, 7.625″ 8.2″ and 8.5″
  • Includes carrier bearings and races and “super” carrier shim kit
See More

Pro-King – Differential Pinion Shim Kit (Part No.742G202)

Differential Pinion Shim Kit

from

$5.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Pro-King – Differential Pinion Shim Kit (Part No.742G200A)

Differential Pinion Shim Kit

from

$18.49
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – 7.5" Ford Notched Cross Pin Shaft (Part No.33430)

7.5" Ford Notched Cross Pin Shaft

from

$84.99
7.5″ Ford notched cross pin shaft. Not Auburn gear. This cross pin shaft is not compatible with Powertrax Lock Rights or Spartan Lockers.

Product Features:
  • Notched cross pin shaft for Ford 7.5″
  • 3.73 and up ratios
  • Not compatible with Spartan Locker or Powertrax Lock Right
See More

Yukon Gear – 8.8" Ford 7/8" Diameter Notched Cross Pin Shaft (.875" For ’86 And Newer) (Part No.33434)

8.8" Ford 7/8" Diameter Notched Cross Pin Shaft (.875" For '86 And Newer)

from

$57.99
8.8″ Ford 7/8″ diameter Notched cross pin shaft (.875″ for ’86 and newer). This cross pin shaft is not compatible with Powertrax Lock Rights or Spartan Lockers.

Product Features:
  • Notched cross pin shaft for Ford 8.8″
  • 0.875″ diameter
  • Not compatible with Spartan Locker or Powertrax Lock Right
See More

1981 Lincoln Mark VI Differentials

Maybe you’re in the middle of a full rebuild of that 1981 Lincoln Mark VI. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 194 different Differentials in our inventory ranging from $0.99 to $2,064.99. That means you can find the exact parts or products you need to keep that 1981 Lincoln Mark VI running smoothly.

Differentials are only as good as their brand. We stock 13 different brands to make sure you have plenty of trusted parts to choose from for your 1981 Lincoln Mark VI. FELPRO, Yukon Gear, and Dorman are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1981 Lincoln Mark VI, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 156 reviews in this category, some of the top rated parts include Differential Master Bearing Kit – Timken with 4.0 stars and Wheel Bearing and Seal Kit with 3.8 stars.

So if you’re in the market for aftermarket Differentials to keep your 1981 Lincoln Mark VI rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1981 Lincoln Mark VI Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1981 Lincoln Mark VI demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Mark VI the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Powertrax Differentials

We carry Powertrax parts in our stock across Complete Differentials categories, plus more. For a 1981 Lincoln Mark VI, our most popular Powertrax Differentials include:
Lock Right Locker
from $444.99
(1)
Lock Right Locker
Complete Differentials

Top 1981 Lincoln Mark VI Differentials from Felpro

Felpro products are another trusted brand when it comes to Differentials for your 1981 Lincoln Mark VI. Popular Felpro parts include:
Differential Cover Gasket
from $14.99
(121)
Differential Cover Gasket
Rear Differential Cover Gaskets

FAQs for 1981 Lincoln Mark VI Differentials

What are the most purchased Differentials for the 1981 Lincoln Mark VI?

Out of 194 Differentials for the 1981 Lincoln Mark VI, the most popular in our inventory are:
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil
Bearings
from $23.99
(7)
Bearings
Front Differential Pinion Bearings
Differential Shaft Lock Bolt
from $5.99
(11)
Differential Shaft Lock Bolt
Differential Pinion Shaft Lock Bolts

What are the top-rated 1981 Lincoln Mark VI Differentials?

Top-rated Differentials for your 1981 Lincoln Mark VI based on customer reviews/ratings are:
Differential Master Bearing Kit - Timken
from $137.99
(8)
Differential Master Bearing Kit – Timken
“These Timken bearings work great in my 10 second drag car.”
Wheel Bearing and Seal Kit
from $169.99
(4)
Wheel Bearing and Seal Kit
“Complete kit with for my rebuild. I was lucky to get awesome service from the salesman. Parts were very reasonable price-wise.”
Differential Master Bearing Kit - Koyo
from $126.99
(2)
Differential Master Bearing Kit – Koyo
“Nice kit for the money.”