1981 Jeep Wagoneer Drive Shafts and Axles

Yukon replacement yoke for Dana 30, 44, 50, and Dana 300 with 26 spline and a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

• Fits Dana Spicer 44
• 26 spline
• 1310 u-joint size
• 3.219″ snap ring span
• 1.062″ cap diameter
• Outside snap ring design
• U-bolt style

Dana 28, Dana 30, Model 35-Reverse, Dana 44, Dana 50 INside axle snap ring (next to side gear).

Product Features:

• Inner axle snap ring for Dana Spicer 28, 30, 44 and 50
• Intalls next to side gear

Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:

• Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
• 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
• Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
• Serviceable construction – non-staked universal joints are designed for future serviceability

Demand genuine Spicer. Dana design, engineering, testing and manufacturing processes all work in conjunction with one another to ensure unparalleled performance that non-genuine parts simply cannot deliver.

Product Features:

• Journal cross is engineered with a solid cold-formed body to ensure better wear and overall strength.
• Bearing cups are heat treated for strength; precision-ground and case-hardened for durability.
• Multi-lip seal keeps grease in and contaminants out, and gets maximum retention in a wider range of environments.
• Thrust washers eliminate metal-to-metal contact, prevent wear and lower the overall operating temperature.

Model 20 & Model 35 axle stud 0.620″ Dia. Shank.

Product Features:

• Axle stud for AMC Model 20 and Model 35
• 1/2″ x 20 thread
• 0.620″ knurl diameter
• 1.625″ long

Outer axle seal to be used with set10 bearing.Yukon Mighty seal.

Product Features:

• Rear axle seal
• Axle bearing and seal kit for Dana 44 rear and Nissan Titan rear
• For use with Set10 bearing

Value-priced seal meets all cataloged application requirements.

Product Features:

• Brand may vary by location

Product Features:

• Bearing retainer
• Fits Yukon axle part numbers YA D75786-1X and YA D75786-2X

Yukon replacement axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Axle bearing and seal kit for ’77 to ’91 Dana 44 and Jeep Wagoneer front axle. This kit includes Timken inner and outer bearings and races along with high quality seals. Unit is sold per side and is covered for one year against manufacturing defects. This axle bearing & seal kit services one side only.

Product Features:

• Fits 1977-1991 Jeep Wagoneer
• Includes axle bearings, races and seal
• Services one side

Yukon replacement axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Axle bearing and seal kit (Set10), some flanged, Timken brand, for Dana 44 and Model 20. This axle bearing & seal kit services one side only.

Product Features:

• Axle bearing and seal kit for Dana 44 rear and Nissan Titan rear
• Includes axle bearing and seal
• Services one side

Yukon 1541H replacement outer stub axle shaft for Dana 44, ’71-’79 Ford Bronco with a length of 9.72 inches and with 19 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy front axles come with a one year warranty against manufacturing defects.

Product Features:

• Fits Dana Spicer 44 in Ford F150 and Bronco and Jeep Wagoneer with drum brakes
• Outer stub
• 19 spline
• 9.72″ from end of splines to center of u-joint bore

4340 Chrome Moly outer stub for GM truck & Blazer and Jeep Wagoneer with disc breakes. 19 spline, 9.94″. Yukon 4340 Chrome-Moly axles provide up to 50% increased strength over stock axles for use in extreme performance applications with large tires and high horsepower. Yukon’s 4340 axles are manufactured using the latest technologies and the highest quality materials to ensure high strength and long life. Limited Lifetime warranty covers manufacturing defects and axle breakage for as long as you own the vehicle. This warranty is not transferable to another party. “No Questions Asked” replacement for first warranty return, however Yukon reserves the right to either replace axle or refund original purchase price after the first warranty claim. Yukon (through Randy’s ring & pinion) makes final determination on warranty considerations.

Product Features:

• Fits Dana Spicer 44 in GM truck and Blazer and Jeep Wagoneer with disc brakes
• 4340 Chromoly
• Outer stub
• 19 spline
• 9.94″ from end of splines to center of u-joint bore

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.

Product Features:

• 2.75 in.
• OE Style
• Direct Fit

Replacement redi-sleeve yoke saver for Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 .Yukon Mighty seal.

Product Features:

• Pinion Redi-sleeve
• Fits Dana Spicer 25, 27, 30, 4 and 50

Crown Automotive offers the largest line of replacement parts for Jeep(R), as well as a growing line of parts for Chrysler and Dodge. Our applications comes with Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.

Product Features:

• Manufactured From High Quality Material
• Engineered To The Specifications
• Meets The Quality Standards
• Designed For Performance And Durability
• Easy To Install

Spindle bearing for Dana 44. This replaces Spicer part number 550759.

Product Features:

• Spindle bearing
• Fits Dana Spicer 44

Manufactured with premium-grade steel, National cylindrical bearings are designed and engineered to meet OE specifications.

Product Features:

• STRONG AND DURABLE: Controlled heat treatment process for strength and durability
• PREMIUM MATERIALS: Precision manufactured using premium-grade steel for durability and performance
• OE-STYLE DESIGN: Engineered to meet OE specifications
• COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
• Professional technicians know they can depend on National

Yukon hardcore drive flange kit for Dana 44, 19 spline outer stubs. Non-engraved caps..

Product Features:

• Drive flange kit
• Fits Dana Spicer 44 with 19 spline outer axles
• Includes two drive flanges, two caps and all necessary hardware

Product Features:

• Axle spacer button
• Fits Dana 44 with 19 spline axles and AMC Model 20
• Trac Loc positraction only

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Design type: spring loaded; multi-lip
• Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
• Resistance to EP lubricants
• Low swell in hydrocarbon fluids
• Delivers quality and reliable performance for every type of repair

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Designed to repair damaged, grooved or worn shafts
• Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
• Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
• Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
• Easy to install with removable flange and installation tool

Product Features:

• Design type: spring loaded; single-lip
• Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
• Good low temperature capability
• Low swell in hydrocarbon fluids
• Delivers quality and reliable performance for every type of repair

Model 20 0.005″ axle end play shim.

Product Features:

• Axle end play shim for AMC Model 20
• 0.005″ thick

Model 20 0.003″ axle end play shim.

Product Features:

• Axle end play shim for AMC Model 20
• 0.003″ thick