1981 Jeep J10 Universal Joints
More 1981 Jeep J10 Universal Joints
Find your specific 1981 Jeep J10 original or aftermarket Universal Joints below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1981 Jeep J10 Universal Joints
Crown Auto Jeep Replacmnt – For Use With Front Or Rear Yokes, Hex Head Bolt (Part No.4006698K)
from
$9.29
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Improve The Performance
- Easy Installation
Crown Auto Jeep Replacmnt – For Use With Front Or Rear Yokes, 12 Point Bolt (Part No.4006928K)
from
$9.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Improve The Performance
- Easy Installation
Dorman – Differential Pinion Yoke Assembly (Part No.697-542)
from
$111.99
Drive shaft pinion yoke corroded or damaged? This pinion yoke directly replaces the original equipment on specific vehicle years, makes and models to restore smooth driving.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft pinion yoke directly replaces the original equipment on specified vehicles
- Effective fix – replacement restores proper connection between drive shaft and differential
- Rigorously tested – designed and evaluated to assure safe, reliable operation
- Trustworthy quality – backed by team of engineers and inspectors in the United States
Yukon Gear – (4) Full Circle Snap Rings, Fit 297X U-Joint With Aftermarket Axle (Part No.32084)
from
$19.99
(4) Full Circle snap rings, fit 297X U-joint with aftermarket axle.
Product Features:
See More
Product Features:
- Set of four full circle snap rings for Dana Spicer 30 and 44 and GM 8.5″ front
Yukon Gear – Dana 44, 8.2", 12P, 12T, Vet, And Model 20 U-Bolts (Part No.41198)
from
$34.99
1310 U-bolts, 5/16″ x 1-3/8″ Dana 30, Dana 44, 8.2″, 12P, 12T, VET, Model 20.
Product Features:
See More
Product Features:
- u-joint u-bolt kit
- Fits AMC Model 20, Dana Spicer 30 and 44, GM 8.2″, 12 bolt passenger car and truck and 1963-1979 Corvette
- 1310 u-joint size
- Includes two u-bolts and four nuts
Yukon Gear – 1330 U/Joint U-Bolts, 5/16" X 1-9/16", (7260 & 7290 Billet) (Part No.41199)
from
$15.99
1330 U/joint U-bolts, 5/16″ X 1-9/16″, (7260 & 7290 BILLET).
Product Features:
See More
Product Features:
- u-joint u-bolt kit
- Fits AMC Model 20, Dana Spicer 30 and 44, GM 8.2″, 12 bolt passenger car and truck and 1963-1979 Corvette
- 1330 u-joint size
- Includes two u-bolts and four nuts
Dorman – Help – U-Joint Bolt Kit (Part No.81008)
from
$6.69
This universal joint U-bolt kit is designed to match the original components required to repair and resecure universal joints on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this universal joint U-bolt kit is designed to match the original components required to repair and resecure universal joints on specified vehicles
- Ideal solution – this kit is a reliable replacement for original components that are missing or have failed due to fatigue
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
MOOG Driveline Products – Universal Joint U-Bolt Kit (Part No.329-10)
from
$9.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- For U-Joints 353, 354, 361, 369 & 497
- Fits 1-1/16″ bearings
Dorman – Help – U-Joint Repair Assortment 2 Pc (Part No.81020)
from
$16.29
This universal joint strap kit is designed to match the original components required to repair and resecure universal joints on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this universal joint strap kit is designed to match the original components required to repair and resecure universal joints on specified vehicles
- Ideal solution – this kit is a reliable replacement for original components that are missing or have failed due to fatigue
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
MOOG Driveline Products – Universal Joint Strap Kit (Part No.437-10)
from
$8.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- For U-Joints 354, 369 & 437G
- Contains two 1.59″ bolt center clamps and four 1/4-28 x 5/8″ cap screws
Yukon Gear – 1310 & 1330 U/Joint Strap, Dana 30, Dana 44, Model 35, & 9.25" With Bolts (Part No.41195)
from
$18.99
1310 & 1330 U/joint strap, Dana 30, Dana 44, Model 35, & 9.25″ w/bolts.
Product Features:
See More
Product Features:
- u-joint strap kit
- Fits Dana Spicer 30 and 44, AMC Model 35 and Chrysler 9.25″
- 1310 and 1330 u-joint size
- Includes two straps and four bolts
Dorman – Help – U-Joint Repair Kit (Part No.81018)
from
$6.99
This universal joint strap kit is designed to match the original components required to repair and resecure universal joints on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this universal joint strap kit is designed to match the original components required to repair and resecure universal joints on specified vehicles
- Ideal solution – this kit is a reliable replacement for original components that are missing or have failed due to fatigue
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Crown Auto Jeep Replacmnt – Oem Replacement, 1.06 Inch Bearing Cap (Part No.J8136616)
from
$46.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Improve The Performance
- Easy Installation
Spicer – Universal Joint (Part No.5-1310X)
from
$35.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More
Driveworks – Universal Joint (Part No.DW-380)
from
$15.49
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).
Product Features:
See More
Product Features:
- The cross is hot forged for the higher torque and horsepower
- The bearing cups are made by cold forging, having higher strength and better rigidity
- Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
- Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
- Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
- Snap rings are held to strict tolerances to ensure proper cup position and retention
- Nitrile rubber seals to optimize grease retention and reduce contamination
Yukon Gear – 1310 Lifetime U/Joint (Part No.42003)
from
$57.99
1310 Yukon Lifetime U/joint. 1.718″ snap ring span, 1.062″ cap diameter. Inside snap ring.
See More
Yukon Gear – 1310 To Mechanics 3R Adapter U/Joint (Part No.42013)
Yukon Gear – 1330 Dual-Size Cap U/Joint (Part No.42017)
from
$61.99
Yukon 1330 Dual-size cap U/Joint. 3.625″ snap ring span. One set of caps is 1.125″ in diameter and the other is 1.062″. Outside snap ring.
See More
Yukon Gear – 1350 U/Joint With Zerk Fitting (Part No.42010)
from
$51.99
Yukon 1350 U/Joint with zerk fitting. 3.625″ snap ring span, 1.118″ cap diameter. Outside snap ring.
See More
MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.280)
from
$32.99
Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
- GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
- KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.380)
from
$23.99
Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
- KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Cross forging shape and flash provide easier installation and high strength
MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.369)
from
$19.99
Backed by superior materials and rigorous testing, MOOG Heavy Duty universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- BUILT TO LAST — Rugged design specifically engineered for fleets, off-highway and commercial vehicles
- STRONG AND DURABLE — Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
- KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- GREASEABLE DESIGN — Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
- INHIBITS PREMATURE WEAR — Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
- RELIABLE PERFORMANCE — Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Yukon Gear – 1350 To 1410 Conversion U/Joint (Part No.42006)
Neapco – Universal Joint (Part No.1-0297)
MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.371)
from
$24.99
Backed by superior materials and rigorous testing, MOOG Super Strength® universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
- CORROSION PROTECTION — Exclusive MICRO SHIELD coating protects against rust and corrosion
- STRONG AND DURABLE — Cold-forged, case-hardened and precision-ground alloy steel crosses for durability
- KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Neapco – Universal Joint (Part No.1-0153)
MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.377)
from
$47.99
Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
- GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
- KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Yukon Gear – Super Joint For GM 8.5", Dana 30 & Dana 44 – One Single Joint (Part No.32081)
from
$412.99
Yukon Super Joint for GM 8.5″, Dana 30 & Dana 44. One single joint.
Product Features:
See More
Product Features:
- Fits Dana Spicer 30 and 44 and GM 8.5″ front
- 4340 Chromoly cross
- Eliminated needle bearings results in larger trunion for added strength
- Uses ultra high grade antiseize for lubrication
- Not recommended for daily driven use
- One complete joint and four full circle snap rings
Popular 1981 Jeep J10 Universal Joints Categories
1981 Jeep J10 Universal Joints
Maybe you’re in the middle of a full rebuild of that 1981 Jeep J10. Maybe you just need a couple of Universal Joints. Either way, Advance Auto Parts has 42 different Universal Joints in our inventory ranging from $4.49 to $609.99. That means you can find the exact parts or products you need to keep that 1981 Jeep J10 running smoothly.
Universal Joints are only as good as their brand. We stock 7 different brands to make sure you have plenty of trusted parts to choose from for your 1981 Jeep J10. Moog, Driveworks, and Spicer are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Universal Joints for your 1981 Jeep J10, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 650 reviews in this category, some of the top rated parts include Non-Greaseable Super Strength Universal Joint with 4.3 stars and Universal Joint with 4.3 stars.
So if you’re in the market for aftermarket Universal Joints to keep your 1981 Jeep J10 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Universal Joints Brands To Make Your 1981 Jeep J10 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1981 Jeep J10 demands trusted brand parts and products to keep it running. Many trusted brands of Universal Joints make up Advance Auto Parts’ inventory, and all are ready to help make your J10 the best it can be. Be sure to browse some of our top Universal Joints brands and parts.
Popular Spicer Universal Joints
We carry Spicer parts in our stock across U-Joints categories, plus more. For a 1981 Jeep J10, our most popular Spicer Universal Joints include:
Top 1981 Jeep J10 Universal Joints from MOOG Driveline Products
MOOG Driveline Products products are another trusted brand when it comes to Universal Joints for your 1981 Jeep J10. Popular MOOG Driveline Products parts include:
FAQs for 1981 Jeep J10 Universal Joints
What are the most purchased Universal Joints for the 1981 Jeep J10?
Out of 42 Universal Joints for the 1981 Jeep J10, the most popular in our inventory are:
What are the top-rated 1981 Jeep J10 Universal Joints?
Top-rated Universal Joints for your 1981 Jeep J10 based on customer reviews/ratings are:
