1981 Jeep Cherokee Performance and Racing Products

Essential Performance and Racing Products for 1981 Jeep Cherokees

Rugged Ridge – Skid Plate; Differential; Jeep logo; for Dana 35 (Part No.DMC-16597.35)

Skid Plate; Differential; Jeep logo; for Dana 35

from

$139.99
Protect your factory differential cover with these heavy-duty skid plates. Designed to fit the contours of your stock differential cover with the distinctive Jeep logo etched into the steel, these heavy duty skids look great while providing extra protection.

Product Features:
  • Black Powder Coated
  • 3/16 in. Steel
  • Use w/ Factory Diff Cover
  • Mounting Hardware Included
  • Jeep Logo
See More

Edelbrock – Engine Cylinder Head (Part No.60129)

Engine Cylinder Head

from

$813.99


Product Features:
  • 50-State Street Legal Aluminum Cylinder Head
  • Out-of-the-Box Bolt-On Performance
  • 54cc Dual-Quench Combustion Chamber
  • Offers Improved Mid To High Lift Flow
  • Thicker Deck Surfaces than Other Brands
See More

Omix – Automatic Transmission Flexplate (Part No.16913.05)

Automatic Transmission Flexplate

from

$83.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Use With 4.2L
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Edelbrock – Engine Gasket Set (Head / Intake / Exhaust / Valve Cover) for AMC/Jeep (Part No.7372)

Engine Gasket Set (Head / Intake / Exhaust / Valve Cover) for AMC/Jeep

from

$171.99
The Edelbrock #7372?head gaskets provide the best sealing solution and are matched to Edelbrock cylinder heads for optimal performance. Edelbrock relies on industry leading head gasket manufactures to ensure our head gasket sets will provide the best fit

Product Features:
  • Head: 4.275″ Bore/0.045″ Thick/10.60cc Vol.
  • Intake: 1.13″x2.21″ Port/.030″ Thick
  • Exhaust: 1.80″x1.30″ Port
  • 3/16″ Valve Cover
  • Multi Piece Configuration
See More

Energy Suspension – Motor Mount (Part No.2.1102G)

Motor Mount

from

$43.99
A true performance application component for cars, trucks, hot rods and racing/competition vehicles – yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.

Product Features:
  • Gains Both Performance and Longevity
  • Will Handle Any and All Torque
  • Out Lasts Rubber
See More

Omix – Piston Ring Set (Part No.17430.22)

Piston Ring Set

from

$98.99
Are you rebuilding an engine and need a fresh set of piston rings? Omix-ADA offers high-quality replacement piston ring sets from Standard to .080 thousandths over size. They will give you years of service and get you back on the road.

Product Features:
  • .040 Over
  • Engine Work May Be Required To Install This Part
  • Limited 5 Year Warranty
See More

Powertrax – No-Slip Traction System (Part No.9203822705)

No-Slip Traction System

from

$527.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Omix – Timing Kit (Part No.17452.08)

    Timing Kit

    from

    $87.99
    Timing chains stretch over time. If left untouched, they can begin jumping teeth on the camshaft and crankshaft sprockets. This will change your timing and will do major damage to your Jeep’s engine. It is recommended that you change the timing chain and

    Product Features:
    • 3 Piece Kit
    • OE Style
    • Direct Fit
    • Limited 5 Year Warranty
    See More

    Omix – Water Pump (Part No.17104.05)

    Water Pump

    from

    $81.99
    Is your water pump leaking? Over time the rubber impeller will deteriorate. It’s easier to replace it now than to have a roadside breakdown in the future. Get a high quality water pump from Omix-ADA. Keep your Jeep running cool.

    Product Features:
    • OE Style
    • Direct Fit
    • Includes Serpentine Belt
    • Efficient Cooling
    • Limited 5 Year Warranty
    See More

    Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

    High Performance 180 Degree Thermostat for Increased Flow

    from

    $26.99
    Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

    Product Features:
    • Opens At 180 Degrees
    • Designed to Resist Large Variations of Coolant Pressure at High RPM
    • Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
    • For High Performance Street, Drag Race, and Oval Track
    • Copper & Brass Construction – Resists Corrosion
    • High Flow
    See More

    Spectre – Valve Cover (Part No.5275)

    Valve Cover

    from

    $64.99
    Available in various sizes, heights, and finishes, Spectre offers a wide variety of high performance valve covers designed to easily replace your stock covers. Designed for AMC/Jeep V8 engines, this valve cover features triple chrome-plated steel construction. Sold in pairs, this standard height cover is built to provide optimum function. With show quality construction and a sealing edge designed for an ideal fit, our valve covers are engineered to look great for applications ranging from custom builds to replacing stock equipment.

    Product Features:
    • Designed for AMC/Jeep V8 engines
    • Sold in pairs
    • Triple chrome-plated steel construction
    • Stock height
    • Features OEM style sealing edge
    See More

    Mallory – Unilite Ignition Module (Part No.605)

    Unilite Ignition Module

    from

    $85.29
    Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

    Product Features:
    • Service Part
    • No Moving Parts To Wear Out
    • Self Contained Unit
    • Can Drive OEM
    • Can Drive High Performance Ignition Coils
    See More

    Edelbrock – Pushrod Set for AMC 343-401 (Part No.9637)

    Pushrod Set for AMC 343-401

    from

    $206.99
    Product Features:
    • Case-Hardened Tubing
    • Surface Hardening
    • Welded Ends
    • 0.3125 in. Diameter
    • Use with or without Hardened Steel Guideplates
    See More

    Motive Gear – Differential Pinion Solid Spacer Kit w/Shims (Part No.4105)

    Differential Pinion Solid Spacer Kit w/Shims

    from

    $22.79


    Product Features:
    • FORD 9″ SOLID SPACER KIT
    See More

    Accel – High-Performance Ignition Coil – Direct OE Fit (Part No.140021)

    High-Performance Ignition Coil - Direct OE Fit

    from

    $72.39
    Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Results in quicker starts, improved idle quality, crisper throttle response and more high RPM power. Compatible with late model Ford EEC-IV computer controlled ignition system equipped with a TFI distributor. Direct OEM replacement. Can also be used with an ACCEL, Mallory, Crane, Holley or MSD capacitive discharge ignition system. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. Brass coil wire contact increases energy efficiency and resists corrosion better than aluminum. High dielectric strength ACCEL Yellow over-molded housing.

    Product Features:
    • 10-15% More Energy
    • Direct Plug In Replacement Direct OE Fit
    • Advanced Bobbin Technology
    • Standard Motor Products SMP Uf-198
    • MSD 8228
    • Improved Idle Quality
    • Resists Shock And Vibration
    • Resists Corrosion
    See More

    Accel – Supercoil (Part No.140001)

    Supercoil

    from

    $105.99
    Engineered for faster rise time, longer spark duration and increased performance. Unique design with premium grade wire, special low resistance, high turns ratio windings. Produces higher spark energy with breakerless electronic ignition systems. For points application the supplied 0.85 ohm ballast resistor must be used in conjunction with the vehicle original ballast resistor, if so equipped. Oversized molded case with integral cooling fins and high capacity oil filled construction provide high thermal conductivity ensuring cool operation and long life. Extra tall tan Alkyd tower and integral voltage dam eliminate “flashover” to primary terminals. Comes complete with mounting hardware and 0.85 ohm ballast resistor. Effective up to 6,500 RPM.

    Product Features:
    • Oil Filled For Better Cooling
    • Optimized Low Resistance
    • Silicon Magnetic Steel E-Core
    • Higher Energy/Voltage Outputs
    • Quicker Starts
    • Improved Idle Quality
    • Resists Shock And Vibration
    • Resists Corrosion
    See More

    B & M – Torque Converter, Holeshot 3000 (Part No.10425)

    Torque Converter, Holeshot 3000

    from

    $879.99
    The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, New turbine hub and dual pattern drive lugs on some Holeshots.

    Product Features:
    • Furnace Brazed Impeller
    • Steel Alloy Pump Drive Tube
    • Heavy Duty Needle Bearing
    • Between Stator and Turbine
    • Furnace Brazed Turbine
    See More

    B & M – Tork Master 2400 (Part No.20404)

    Tork Master 2400

    from

    $339.99
    Torque Converter – Tork Master 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost performance torque converter. The Tork Master is an excellent all-around performance street converter. The best value priced street converters available, Tork Master converters come with a new precision pump drive tube and all are pressure tested and fully balanced. The Tork Master torque converter is not recommended for big block or supercharged applications. New alloy steel pump drive tube. Needle thrust bearing when factory equipped. New thrust washer between turbine and cover when required. Due to torque converter core availability, the actual converter size may vary but performance functionality will be as advertised.

    Product Features:
    • New Precision Pump Drive Tube
    • Pressure Tested
    • Fully Balanced
    • Needle Thrust Bearing
    • New Thrust Washer
    See More

    Edelbrock – RPM Air-Gap AMC 304/360/401 Intake Manifold (Part No.7531)

    RPM Air-Gap AMC 304/360/401 Intake Manifold

    from

    $504.99
    Edelbrock part #7531 RPM Air-Gap AMC intake manifold is designed for 1970-91 304-401 c.i.d. V8 applications. The RPM Air-Gap intake manifold incorporate the same race-winning technology as our Victor Series competition intakes. The air-gap design features

    Product Features:
    • Based on Performer RPM-Series with Unique Air Gap
    • Air Gap Cooler and Denser Mixture for More Power
    • Designed for 1500 to 6500 RPM Street-Driven Power
    • Dual-Plane High-Rise Intake w/180 deg Firing Order
    • Produces Incredible Top-End Horsepower
    • Retains Good Throttle Response and Acceleration
    • Includes Std Oil Fill ; PCV ; A/C Accy Bosses
    • Not for Exhaust-Heat Chokes – No Exhaust Crossover
    See More

    Edelbrock – XX Performer EGR Top Intake Manifold (Part No.3787)

    XX Performer EGR Top Intake Manifold

    from

    $113.99


    Product Features:
    • Matching Top For Edelbrock Base Intake PN[3785]
    • Designed for OEM 2-barrel Carburetor
    • Contains Necessary Linkage And Bracketry
    • 50-State Street Legal if Correct Carburetor Used
    • Accepts Stock EGR Connections
    • Match With Edelbrock Valve Covers Pn[4488]
    See More

    Earls Performance Product – Brake Bleeder Screws (Part No.280029ERL)

    Brake Bleeder Screws

    from

    $40.99
    Brake Bleeder Screws

    Edelbrock – Sure Seat Valve Springs for Chrysler 383-400-413-440 V8 1969-79 (Part No.5792)

    Sure Seat Valve Springs for Chrysler 383-400-413-440 V8 1969-79

    from

    $141.99
    Product Features:
    • Non-Rotator Type
    • 1.550 in. Outer Diameter
    • .190 Wire Size
    • Single Coil Spring Type
    • Set of 16
    See More

    Mr. Gasket – Thermocap Radiator Cap (Part No.2476BK)

    Thermocap Radiator Cap

    from

    $48.09
    The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

    Product Features:
    • Indicates coolant temperature
    • Helps prevent coolant injuries
    • Fahrenheit and centigrade readings
    • Color-coded temperature ranges
    • Integrated coolant reclamation valve
    • Improves under-hood appearance
    • Chromed crown with a colored trim ring
    See More

    Upgrade your 1981 Jeep Cherokee with Top-Quality Performance and Racing Products

    When it comes to maintaining or upgrading your 1981 Jeep Cherokee, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jeep or enhancing its overall performance, Performance and Racing Products are key to keeping your Cherokee functioning at its best. At Advance Auto Parts, we offer a wide selection of 29 Performance and Racing Products for the 1981 Jeep Cherokee, designed to meet your needs without breaking the bank. From Performance Radiator replacements to Performance Ignition Products upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

    Affordable Prices and Wide Selection

    Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1981 Jeep Cherokee at great prices. Our Performance and Racing Products inventory for this model ranges from just $22.79 to $879.99, with an average price of $185.00. Our 29 Performance and Racing Products in stock come from 12 trusted brands, so you’re sure to find the right part for your 1981 Jeep Cherokee without overspending.

    Top Brands and High Customer Satisfaction

    Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1981 Jeep Cherokee, we stock popular OEM and aftermarket Performance and Racing Products from top names like Accel, Mr. Gasket, Edelbrock, and more. Accel Performance and Racing Products start at just $42.49 and boast an impressive 4 stars average rating from customers. Mr. Gasket and Edelbrock also bring quality to the table, with Performance and Racing Products available starting at $26.99, and at an average 4 stars rating. With 366 customer reviews and counting, our 1981 Jeep Cherokee Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

    Explore Related Parts and More

    While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1981 Jeep Cherokee is always ready to roll. We’re committed to providing you with everything you need to keep your Cherokee in top shape, all in one place. Start shopping confidently below for your 1981 Jeep Cherokee!

    Best-Selling Performance Radiators for 1981 Jeep Cherokees

    Enhance the driving experience in your Jeep with 1 quality Performance Radiator components, starting at $48.09.

    Mr. Gasket – Thermocap Radiator Cap (Part No.2476BK)

    Thermocap Radiator Cap

    from

    $48.09
    The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

    Product Features:
    • Indicates coolant temperature
    • Helps prevent coolant injuries
    • Fahrenheit and centigrade readings
    • Color-coded temperature ranges
    • Integrated coolant reclamation valve
    • Improves under-hood appearance
    • Chromed crown with a colored trim ring
    See More

    Most Popular 1981 Jeep Cherokee Performance Ignition Products

    Customize your Jeep with 7 Performance Ignition Products products like Performance Coils and Performance Ignition Parts, all priced under $186.99.

    Accel – High Energy Ignition Coil for GM HEI – 1973-1991 (Part No.140003)

    High Energy Ignition Coil for GM HEI - 1973-1991

    from

    $100.99
    Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.

    Product Features:
    • 10-15% More Energy
    • Direct Plug In Replacement Direct OE Fit
    • Advanced Bobbin Technology
    • Highly Specialized Silicone Magnetic Steel Cores
    • Standard Motor Products SMP Dr-31
    • MSD 8225
    See More

    Mallory – Unilite Ignition Module (Part No.605)

    Unilite Ignition Module

    from

    $85.29
    Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

    Product Features:
    • Service Part
    • No Moving Parts To Wear Out
    • Self Contained Unit
    • Can Drive OEM
    • Can Drive High Performance Ignition Coils
    See More

    Accel – Super Stock Replacement Coil for Improved Performance, Starting, and Power (Part No.8140)

    Super Stock Replacement Coil for Improved Performance, Starting, and Power

    from

    $42.49
    Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary

    Product Features:
    • 42000 Volts
    • Effective To 6500 RPM
    • Quicker Starting
    • Improved Throttle Response
    • Higher RPM Power
    • Can Finished In Yellow
    See More

    Accel – Super Stock Coil Chrome (Part No.8140C)

    Super Stock Coil Chrome

    from

    $47.49
    Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary

    Product Features:
    • Chrome Plated
    • 42000 Volts
    • Effective To 6500 RPM
    • Improved Throttle Response
    • Higher RPM Power
    • Can Finished In Yellow
    See More

    Accel – Supercoil (Part No.140001)

    Supercoil

    from

    $105.99
    Engineered for faster rise time, longer spark duration and increased performance. Unique design with premium grade wire, special low resistance, high turns ratio windings. Produces higher spark energy with breakerless electronic ignition systems. For points application the supplied 0.85 ohm ballast resistor must be used in conjunction with the vehicle original ballast resistor, if so equipped. Oversized molded case with integral cooling fins and high capacity oil filled construction provide high thermal conductivity ensuring cool operation and long life. Extra tall tan Alkyd tower and integral voltage dam eliminate “flashover” to primary terminals. Comes complete with mounting hardware and 0.85 ohm ballast resistor. Effective up to 6,500 RPM.

    Product Features:
    • Oil Filled For Better Cooling
    • Optimized Low Resistance
    • Silicon Magnetic Steel E-Core
    • Higher Energy/Voltage Outputs
    • Quicker Starts
    • Improved Idle Quality
    • Resists Shock And Vibration
    • Resists Corrosion
    See More

    Mallory – Distributor Wiring Harness (Part No.29349)

    Distributor Wiring Harness

    from

    $30.49


    Product Features:
    • Service Part
    • Makes Connections Quick And Easy
    See More

    Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

    Promaster Classic Series; Ignition Coil

    from

    $186.99
    Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

    Product Features:
    • Glass Filled Polyester Case
    • Longer Spark Duration
    • Increased Performance
    • No Energy Loss Due To Arcing
    • Includes Brass Contact Terminal
    See More

    Top Picks for 1981 Jeep Cherokee Performance Valve Covers

    Upgrade Jeep Cherokees with top-quality Performance Valve Covers parts, including 2 OEM and aftermarket selections for your 1981 model.

    Edelbrock – Signature Series Valve Covers: AMC/Jeep 290-401 V8 1967-91, Chrome Steel (Part No.4431)

    Signature Series Valve Covers: AMC/Jeep 290-401 V8 1967-91, Chrome Steel

    from

    $75.99
    The Edelbrock #4431 Signature Series Valve Covers are designed for AMC/Jeep 290-304-343-360-390-401 V8 ’67-91 applications. Engineered for function and styled for great looks, Signature Series valve covers have stock-style breather baffles that prevent oil passage to the PCV valve. These quality valve covers accept all emissions equipment, including PCV valve holes. Rubber grommets for the breather and PCV valve holes are included. Matching breathers sold separately.

    Product Features:
    • AMC/Jeep 290-401 V8 1967-91
    • Short
    • Chrome Steel
    • Set Of Two
    • Rubber Grommets For Breather
    See More

    Spectre – Valve Cover (Part No.5275)

    Valve Cover

    from

    $64.99
    Available in various sizes, heights, and finishes, Spectre offers a wide variety of high performance valve covers designed to easily replace your stock covers. Designed for AMC/Jeep V8 engines, this valve cover features triple chrome-plated steel construction. Sold in pairs, this standard height cover is built to provide optimum function. With show quality construction and a sealing edge designed for an ideal fit, our valve covers are engineered to look great for applications ranging from custom builds to replacing stock equipment.

    Product Features:
    • Designed for AMC/Jeep V8 engines
    • Sold in pairs
    • Triple chrome-plated steel construction
    • Stock height
    • Features OEM style sealing edge
    See More

    In-Demand Performance Engines for 1981 Jeep Cherokees

    Select from 12 premium Performance Engines parts for your 1981 Jeep Cherokee, with prices ranging from $26.99 to $879.99.

    Edelbrock – Performer Intake Manifold for 1970-91 AMC, Non-EGR, Satin Finish (Part No.2131)

    Performer Intake Manifold for 1970-91 AMC, Non-EGR, Satin Finish

    from

    $424.99


    Product Features:
    • For Idle to 5500 RPM Street-Driven Performance
    • Dual-Plane Low-Rise Intake w/180 deg. Firing Order
    • Patented Runner Design Ensures Broad Torque Curve
    • Excellent Throttle Response and Mid-Range Power
    • 50-State Street Legal if Correct Carburetor Used
    • Not for Stock Motorcraft Spread Bore Carburetor
    • Two Center Bolt Holes are Offset
    See More

    Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

    High Performance 180 Degree Thermostat for Increased Flow

    from

    $26.99
    Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

    Product Features:
    • Opens At 180 Degrees
    • Designed to Resist Large Variations of Coolant Pressure at High RPM
    • Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
    • For High Performance Street, Drag Race, and Oval Track
    • Copper & Brass Construction – Resists Corrosion
    • High Flow
    See More

    Edelbrock – Engine Gasket Set (Head / Intake / Exhaust / Valve Cover) for AMC/Jeep (Part No.7372)

    Engine Gasket Set (Head / Intake / Exhaust / Valve Cover) for AMC/Jeep

    from

    $171.99
    The Edelbrock #7372?head gaskets provide the best sealing solution and are matched to Edelbrock cylinder heads for optimal performance. Edelbrock relies on industry leading head gasket manufactures to ensure our head gasket sets will provide the best fit

    Product Features:
    • Head: 4.275″ Bore/0.045″ Thick/10.60cc Vol.
    • Intake: 1.13″x2.21″ Port/.030″ Thick
    • Exhaust: 1.80″x1.30″ Port
    • 3/16″ Valve Cover
    • Multi Piece Configuration
    See More

    B & M – Torque Converter, Holeshot 3000 (Part No.10425)

    Torque Converter, Holeshot 3000

    from

    $879.99
    The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, New turbine hub and dual pattern drive lugs on some Holeshots.

    Product Features:
    • Furnace Brazed Impeller
    • Steel Alloy Pump Drive Tube
    • Heavy Duty Needle Bearing
    • Between Stator and Turbine
    • Furnace Brazed Turbine
    See More

    Edelbrock – Engine Cylinder Head (Part No.60129)

    Engine Cylinder Head

    from

    $813.99


    Product Features:
    • 50-State Street Legal Aluminum Cylinder Head
    • Out-of-the-Box Bolt-On Performance
    • 54cc Dual-Quench Combustion Chamber
    • Offers Improved Mid To High Lift Flow
    • Thicker Deck Surfaces than Other Brands
    See More

    Edelbrock – RPM Air-Gap AMC 304/360/401 Intake Manifold (Part No.7531)

    RPM Air-Gap AMC 304/360/401 Intake Manifold

    from

    $504.99
    Edelbrock part #7531 RPM Air-Gap AMC intake manifold is designed for 1970-91 304-401 c.i.d. V8 applications. The RPM Air-Gap intake manifold incorporate the same race-winning technology as our Victor Series competition intakes. The air-gap design features

    Product Features:
    • Based on Performer RPM-Series with Unique Air Gap
    • Air Gap Cooler and Denser Mixture for More Power
    • Designed for 1500 to 6500 RPM Street-Driven Power
    • Dual-Plane High-Rise Intake w/180 deg Firing Order
    • Produces Incredible Top-End Horsepower
    • Retains Good Throttle Response and Acceleration
    • Includes Std Oil Fill ; PCV ; A/C Accy Bosses
    • Not for Exhaust-Heat Chokes – No Exhaust Crossover
    See More

    Edelbrock – Pushrod Set for AMC 343-401 (Part No.9637)

    Pushrod Set for AMC 343-401

    from

    $206.99
    Product Features:
    • Case-Hardened Tubing
    • Surface Hardening
    • Welded Ends
    • 0.3125 in. Diameter
    • Use with or without Hardened Steel Guideplates
    See More

    Edelbrock – Sure Seat Valve Springs for Chrysler 383-400-413-440 V8 1969-79 (Part No.5792)

    Sure Seat Valve Springs for Chrysler 383-400-413-440 V8 1969-79

    from

    $141.99
    Product Features:
    • Non-Rotator Type
    • 1.550 in. Outer Diameter
    • .190 Wire Size
    • Single Coil Spring Type
    • Set of 16
    See More

    Edelbrock – Cylinder Head Gasket Set for AMC/Jeep (Part No.7329)

    Cylinder Head Gasket Set for AMC/Jeep

    from

    $107.99
    Edelbrock part #7329 head gasket is intended for AMC 304-401 CID V8 engines. This gasket comes as a set and has a 4.275″ bore size, .045″ compressed thickness and 10.6 cc volume. This gasket will fit the 304 AMC small bore applications even though the Ede

    Product Features:
    • 4.275 in. Cylinder Bore Diameter
    • 0.045 in. Thickness
    • 10.60cc Volume
    • Gray Color
    • Two Piece Configuration
    See More

    Omix – Piston Ring Set (Part No.17430.22)

    Piston Ring Set

    from

    $98.99
    Are you rebuilding an engine and need a fresh set of piston rings? Omix-ADA offers high-quality replacement piston ring sets from Standard to .080 thousandths over size. They will give you years of service and get you back on the road.

    Product Features:
    • .040 Over
    • Engine Work May Be Required To Install This Part
    • Limited 5 Year Warranty
    See More

    Omix – Timing Kit (Part No.17452.08)

    Timing Kit

    from

    $87.99
    Timing chains stretch over time. If left untouched, they can begin jumping teeth on the camshaft and crankshaft sprockets. This will change your timing and will do major damage to your Jeep’s engine. It is recommended that you change the timing chain and

    Product Features:
    • 3 Piece Kit
    • OE Style
    • Direct Fit
    • Limited 5 Year Warranty
    See More

    Omix – Water Pump (Part No.17104.05)

    Water Pump

    from

    $81.99
    Is your water pump leaking? Over time the rubber impeller will deteriorate. It’s easier to replace it now than to have a roadside breakdown in the future. Get a high quality water pump from Omix-ADA. Keep your Jeep running cool.

    Product Features:
    • OE Style
    • Direct Fit
    • Includes Serpentine Belt
    • Efficient Cooling
    • Limited 5 Year Warranty
    See More

    Most Sold 1981 Jeep Cherokee Performance Transmissions

    Explore our best-selling Jeep parts for the 1981 Cherokee among 2 OEM and aftermarket options starting from $43.99.

    Energy Suspension – Motor Mount (Part No.2.1102G)

    Motor Mount

    from

    $43.99
    A true performance application component for cars, trucks, hot rods and racing/competition vehicles – yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.

    Product Features:
    • Gains Both Performance and Longevity
    • Will Handle Any and All Torque
    • Out Lasts Rubber
    See More

    Rugged Ridge – Engine Mount Kit; Aluminum (Part No.18390.20)

    Engine Mount Kit; Aluminum

    from

    $174.99
    Rugged Ridge Solid Motor mounts are built from 6061-T6 Aluminum with a tensile strength of 42,000 psi. Built to replace your wimpy OE rubber engine mounts to eliminate weight transfer on the trail torque loss and binding that result in excess engine movement.

    Product Features:
    • Aluminum
    • Pair
    See More

    Top-Rated Performance and Racing Products Brands For Your 1981 Jeep Cherokee

    Shop for the best-rated brands offering Performance and Racing Products and other products for your 1981 Jeep Cherokees. Below you’ll find some of our best rated Performance and Racing Products from Accel, Mr. Gasket, and Edelbrock, and more. Performance and Racing Products from these brands that fit a 1981 Cherokee start at just $26.99 and are rated as high as 4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

    Popular Accel 1981 Jeep Cherokee Performance and Racing Products

    When it comes to maintaining or upgrading your 1981 Jeep Cherokee, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Accel ticks all of those boxes. We offer a wide selection of Accel Performance and Racing Products, specifically designed for the 1981 Jeep Cherokee. With over 4 Accel brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $42.49, with an average price of just $74.24. Plus, with over 71 customer reviews and an average rating of 4 stars, you can trust that our Accel Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

    Supercoil
    from
    $105.99
    This product is not rated

    Supercoil

    “”

    High Energy Ignition Coil for GM HEI - 1973-1991
    from
    $100.99

    (8)

    High Energy Ignition Coil for GM HEI – 1973-1991

    “GREAT ITEM WORKS WELL”

    Popular Mr. Gasket 1981 Jeep Cherokee Performance and Racing Products

    Mr. Gasket auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1981 Jeep Cherokee owner should feel confident when installing genuine Mr. Gasket parts in their vehicle. To ensure the best fit and performance for your 1981 Cherokee, Advance Auto Parts carries a full inventory of 2 Mr. Gasket Performance and Racing Products. Plus you will be keeping your Jeep in peak condition while saving money because prices on these Mr. Gasket Performance and Racing Products range from $26.99 to $48.09, plus, with more than 20 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

    Thermocap Radiator Cap
    from
    $48.09
    This product is not rated

    Thermocap Radiator Cap

    “”

    High Performance 180 Degree Thermostat for Increased Flow
    from
    $26.99

    (20)

    High Performance 180 Degree Thermostat for Increased Flow

    “Installed in my 95 mustang perfect fit and working better than hopped or expected!!!”

    FAQs for 1981 Jeep Cherokee Performance and Racing Products

    Which Performance and Racing Products are best-sellers for 1981 Jeep Cherokees?

    Out of 29 Performance and Racing Products that fit 1981 Jeep Cherokees, the following parts are the top sellers:

    What’s the price range for 1981 Jeep Cherokee Performance and Racing Products?

    Performance and Racing Product prices for the 1981 Jeep Cherokee start at $22.79 and go up to $879.99 for the most premium parts.

    What’s the average price of a Performance and Racing Product for a 1981 Jeep Cherokee?

    The average price for Performance and Racing Products for the 1981 Jeep Cherokee is $185.00. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

    Does Advance Auto Parts sell Performance and Racing Products for other Jeep Cherokee model years?

    Yes, we currently carry Performance and Racing Products for 36 model years of Jeep Cherokees between 1974 and 2022. Performance and Racing Products are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

    What are the cheapest Performance and Racing Products for my 1981 Jeep Cherokee?

    The cheapest 1981 Jeep Cherokee Performance and Racing Products we carry in stock are:

    What are the top-rated Performance and Racing Products that fit the 1981 Jeep Cherokee?

    Out of 366 reviews by customers, our 1981 Jeep Cherokee Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1981 Jeep Cherokee and their top-rated products:

    What types of Performance and Racing Products do you sell for my 1981 Jeep Cherokee?

    As of 2/5/25, these are some of the most in-demand types of Performance and Racing Products for a 1981 Jeep Cherokee:

    Can I get help with 1981 Jeep Cherokee Performance and Racing Product orders?

    Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jeep Performance and Racing Products and more.

    What is your return policy for Jeep Cherokee Performance and Racing Products?

    Advance Auto Parts keeps returns simple. For new Jeep Cherokee Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.