1981 Jeep Cherokee Ignition and Tune-Up Products

Below you will find various in-demand Jeep Ignition and Tune-Up Products, components and accessories for your 1981 Cherokee. Advance Auto Parts has popular Cherokee parts like Ignition Boots, Spark Plugs, Ignition Coils and Boots and more. You’ll also find aftermarket and OEM Ignition and Tune-Up Products for other Cherokee model years including 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 and more. Select a category of 1981 Jeep Cherokee Ignition and Tune-Up Products below and start saving instantly.

Popular 1981 Jeep Cherokee Ignition and Tune-Up Products Categories

Ignition Switch Bulbs

Spark Plug Wire Set Cut To Fits

Ignition Coil Boots

Standard Spark Plug Wires

Ignition Pickup and Stators

Optional Spark Plug Wires

Ignition Conversion Kits

Ignition Switch Actuators

Distributor Cap Kits

Ignition Module and Controls

Distributor Rotor Buttons

Ignition Coil Connectors

Ignition Starter Switches

Distributor Small Parts

Ignition Switch Kits

Spark Plug Non-Foulers

Ignition Lock Cylinder Switch Assemblies

Points and Condensers and Kits

Distributor Gears

Ignition Switch Connectors

Armature and Reluctors

Distributor Cap Carbon Buttons

Essential Ignition and Tune-Up Products for 1981 Jeep Cherokees

from

$4.29

Product Features:

Fel-Pro Oil Pan SnapUps 5/16″ bolts
Designed to hold up the pan and gasket, for one person installation
Engine Saver Hardware
Unsurpassed quality you can trust
Sold in sets of four and are reusable

from

$9.99

This spark plug non fouler is designed for easy installation on specified vehicles to protect spark plugs from fouling and damage. It is engineered for durability and reliable performance.

Product Features:

Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
Durable construction – made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$29.99

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

from

$37.49

Is your Jeep running rough? Over time ignition parts will deteriorate. It’s easier to replace them now than to have a roadside breakdown in the future. Order high quality ignition parts from Omix-ADA to get your Jeep running smooth again.

Product Features:

For 4.0L
OE Style
Direct Fit

from

$168.99

The original Ignitor module is ideal for restorations. Ignitor Module Kits are extremely easy to install and fit into your original distributor to maintain your stock look. No additional ignition box is required keeping a clean look under the hood. Ignitors are available for most distributors that came with mechanical breaker points and will cover AUTOMOTIVE, MARINE, INDUSTRIAL and AGRICULTURE applications.

Product Features:

Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
2:1 improvement over “points” in current fall time for increased coil output.
Rotating cobalt magnets trigger a Hall Effect integrated circuit; no points to burn; no moving parts to wear out.
Epoxy molding makes our module impervious to dirt, oil, grease and moisture.
Stable timing; no need for any adjustments.
Pair with a Flame Thrower Canister Coil for optimal performance
Legal in all 50 states and Canada (C.A.R.B. E.O. No. D-57-22)

from

$115.99

Carquest Premium distributors are built to meet or exceed the original equipment (OE) specifications for each application. Our distributors are built by a manufacturer that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each distributor is supplied with the cap, rotor and any seals needed for installation. Carquest Premium distributors are 100% new and undergo extensive validation testing to ensure long-lasting ignition performance and reliability.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
100% new unit with no core charges
Precision machined shafts result in high speed accuracy and help prevent bearing failures
Every distributor is tested to ensure reliable and long-lasting performance
O-rings or gaskets included where applicable
Precision Engineered ignition modules and plugs ensure proper performance plus precise connection.
Precision machined and ground shafts assure high speed accuracy and prevent bearing failures.
Original Equipment Equivalent high voltage ignition coils.
100% New Components and fasteners eliminate premature failures.

from

$153.99

Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit: includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.

Product Features:

Most Advanced Wire By Mallory
RFI Suppression
High Temperature Silicone Jacket
Withstands Over 500+F
Come In Ready To Use Kits
Extra Long Kits

from

$9.49

The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$57.99

CARQUEST Ignition Modules are built by an ignition systems manufacturer with expertise in the entire vehicle spark system.

Product Features:

CARQUEST Ignition Modules creates and refines the timing of the engine using various sensors and readings throughout the spark system in order to create an efficiently running engine.
CARQUEST Ignition Modules use current and voltage limiting circuitry in order to prevent the ignition coil from over voltage/current. Over voltages can allow for coils to create excessive heat which can damage to the ignition module resulting in check eng
CARQUEST Ignition Modules are 100% individually tested for all product functionalities including over voltage, timing and dwell.

from

$115.99

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.

Product Features:

Plastic
OE Style
Direct Fit

from

$7.99

The distributor is just one piece of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order. The distributor reluctor is the pole piece for the distributor pick-up.

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$36.99

Product Features:

SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
EPDM inner insulation stops power-robbing voltage leaks.
With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
Excellent interference suppression and consistent performance
Easy lock terminals for more convenient installation.
Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
Broad coverage available for most vehicles on the road today
Include grease pack to ensure easy installation and removal

from

$38.49

Every single Delphi ignition coil is designed and endurance tested using high quality materials. This ensures fast starts, consistent engine performance and optimized fuel efficiency. We makes more than 10 million ignition coils for North America each year, and each one is engineered to OE design specifications for vehicles from Ford, Toyota, Nissan, Lexus, GM, Mazda, Chrysler, Subaru, Acura and more.

Product Features:

Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues

from

$20.05

BWD SELECT replacement parts are designed, specified and manufactured with one goal in mind – to make them the very best. We use the finest materials and improve on OE specifications whenever possible. The result is maximum performance and longevity.

Product Features:

100% pure copper windings in primary and secondary bobbins improve durability and provide higher resistance to internal shorts and dielectric breakdown
Thermoplastic housing withstands heat stress for enhanced durability
External core made from oriented silicon steel ensures durability and longevity
Stainless steel spring resists corrosion
Tin-plated brass terminals improve electrical contact and protect against corrosion

from

$62.99

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.

Product Features:

OE Style
Direct Fit
Includes 2 Keys
High Quality

from

$23.99

Upgrade your vehicle with ZEVO® LED miniature bulbs for added style, performance, and the many benefits of LEDs. Instantly enhance the interior and exterior lighting applications of your vehicle with a modern bright white light for head-turning style and increased visibility by other motorists. Easy-to-install with a robust design and high-quality components, ZEVO replacement bulbs are backed by a limited warranty to provide exceptional performance through the life of the vehicle. Also available in an array of colors to update your car or truck.

Product Features:

HIGH EFFICIENY: Delivers greater clarity with less power consumption and longer bulb life when compared to standard incandescent bulbs
RELIABLE: Thermal management to maximize life, matched with robust design that withstands temperature and shock for optimal performance
NON-POLARITY DESIGN: Plug & play easy installation; SYLVANIA ZEVO LED bulbs light on two sides and can be installed either direction
INSTANT ON: Provide full brightness instantly, giving drivers around you more time to react, compared to the slower light-up with Incandescent bulbs
BRIGHT WHITE LIGHT: Ideal for use in Daytime running lights (DRL), back up/reverse, map, dome, trunk, cargo and license plate light bulb replacement
HYPERFLASH: For some vehicles, installing a load equalizer may be required to eliminate hyper flash or dashboard error messages
EASY DIY INSTALLATION: A direct replacement for the factory bulbs in your vehicle, no modification required
SMART MAINTENANCE: Always replace bulbs in pairs to ensure equal brightness and color.
SAFETY: High-quality SYLVANIA bulbs are designed to perform to all relevant safety standards set for the lighting application.
TRUSTED BRAND: SYLVANIA is a trusted OEM automotive lighting manufacturer, with over 100 years of superior optical engineering experience

from

$25.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$99.99

The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.

Product Features:

500 Ohms/ft Of Resistance
550 F Rated Silicone Jacket
Stainless Steel Plug Terminals
High RFI Suppression For Street And Strip Use
Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles
8mm High Gloss Silicone Jacket

from

$57.99

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Improve The Performance
Easy Installation

from

$53.99

Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Magnet size and strength optimized for precise signal output.
Precision-wound coated copper windings increase signal output and increase longevity.
Tailored magnetic circuit programming enhances timing accuracy between the reluctor wheel and circuit output.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$3.99

Autolite Copper spark plugs are crafted to deliver reliable performance and durability, making them an excellent choice for quick starts and consistent power. Featuring a copper core center electrode, these spark plugs excel in thermal control and resist fouling, ensuring smooth operation. The high nickel alloy center and ground electrodes are designed for extended life, while the extra-long projection of the center electrode enhances ignition efficiency. Built with a high alumina multi-rib ceramic insulator, these plugs offer superior thermal conductivity and insulation for added strength. The nickel-plated shell provides exceptional corrosion resistance, ensuring durability over extended use. With a flat seat type and integrated resistor, these spark plugs are engineered to meet regular-grade performance Standards, making them a dependable solution for your vehicle’s ignition system.

Product Features:

The copper core center electrode aids in thermal control and improves resistance to fouling.
Its specially engineered high nickel alloy center and ground electrode provides extended life.
The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
The integrated resistor minimizes electrical interference, ensuring consistent and reliable ignition performance.

from

$52.99

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.

Product Features:

Distributor Mounted
OE Style
Direct Fit

from

$33.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$7.79

Carquest Premium spark plug boots are engineered to restore ignition boot reliability and performance. They are designed to meet or exceed original equipment (O.E.) specifications for fit, form and function. Our spark plug boots offer excellent heat resistance as well as maximum protection against spark loss. Carquest Premium spark plug boots are built with a durable silicone compound for resistance to high heat and abrasion, resulting in a longer-lasting ignition repair.

Product Features:

Product Features:

OE design provides an exact fit for your application
Provides excellent heat resistance as well as maximum protection against spark loss
Durable silicone compound for resistance to high heat or abrasion
Spring included with the spark plug boot
Design for direct compatibility
Multipack provides one time replace all COP for better deal

from

$32.99

Product Features:

SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
EPDM inner insulation stops power-robbing voltage leaks.
With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
Excellent interference suppression and consistent performance
Easy lock terminals for more convenient installation.
Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
Broad coverage available for most vehicles on the road today
Include grease pack to ensure easy installation and removal

from

$33.99

Product Features:

SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
EPDM inner insulation stops power-robbing voltage leaks.
With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
Excellent interference suppression and consistent performance
Easy lock terminals for more convenient installation.
Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
Broad coverage available for most vehicles on the road today
Include grease pack to ensure easy installation and removal

from

$10.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$7.99

The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine¿s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

Upgrade your 1981 Jeep Cherokee with Top-Quality Ignition and Tune-Up Products

When it comes to maintaining or upgrading your 1981 Jeep Cherokee, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jeep or enhancing its overall performance, Ignition and Tune-Up Products are key to keeping your Cherokee functioning at its best. At Advance Auto Parts, we offer a wide selection of 94 Ignition and Tune-Up Products for the 1981 Jeep Cherokee, designed to meet your needs without breaking the bank. From Ignition Boot replacements to Spark Plugs upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Ignition and Tune-Up Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Ignition and Tune-Up Products for your 1981 Jeep Cherokee at great prices. Our Ignition and Tune-Up Products inventory for this model ranges from just $3.29 to $649.99, with an average price of $87.85. Our 94 Ignition and Tune-Up Products in stock come from 20 trusted brands, so you’re sure to find the right part for your 1981 Jeep Cherokee without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1981 Jeep Cherokee, we stock popular OEM and aftermarket Ignition and Tune-Up Products from top names like Champion, Autolite, Carquest, and more. Champion Ignition and Tune-Up Products start at just $4.99 and boast an impressive 4.7 stars average rating from customers. Autolite and Carquest also bring quality to the table, with Ignition and Tune-Up Products available starting at $3.99, and at an average 4.6 stars rating. With 1,228 customer reviews and counting, our 1981 Jeep Cherokee Ignition and Tune-Up Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Ignition and Tune-Up Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1981 Jeep Cherokee is always ready to roll. We’re committed to providing you with everything you need to keep your Cherokee in top shape, all in one place. Start shopping confidently below for your 1981 Jeep Cherokee!

Best-Selling Ignition Boots for 1981 Jeep Cherokees

Enhance the driving experience in your Jeep with 4 quality Ignition Boot components, starting at $63.99.

show more show less

from

$89.99

500 Ohms/ft Of Resistance
550 F Rated Silicone Jacket
Stainless Steel Plug Terminals
High RFI Suppression For Street And Strip Use
Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles
8mm High Gloss Silicone Jacket

from

$63.99

These ACCEL wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with black wire contain zinc-plated steel terminals. Noise suppression core. Set contains 8 plug wires with coil lead.

Product Features:

7mm And 8mm High Gloss Silicone Jacket
450° F Rated Silicone Jacket
Stainless Steel Plug Terminals
RFI Suppression For Street Driven Applications
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction

from

$71.99

7mm And 8mm High Gloss Silicone Jacket
450° F Rated Silicone Jacket
Stainless Steel Plug Terminals
RFI Suppression For Street Driven Applications
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles

from

$176.99

The oversized 8.8mm wire features a double silicone construction rated at over 600 F and 60kV. High gloss black silicone wire jacket not only looks great, but resists heat extremes, petrochemicals, ozone and moisture better than so-called blended materials for greater durability and longer life. High-density, high-temperature silicone insulation provides greater dielectric strength and eliminates arcing and the effects of corona better than typical OE style rubber materials. All-Kevlar stranded inner core and fiberglass braiding add greater pull strength and terminal retention. Stainless steel and brass terminals provide unsurpassed electrical conductivity and excellent corrosion resistance compared to terminals made of common or plated metals.

Product Features:

150 Ohms/ft Of Resistance
600 F Rated Silicone Jacket
Stainless Steel Plug Terminals
Custom-fit Universal And Import Coverage
Pre And Post HEI Vehicles
Spiral-Wound Copper/Nickel Alloy

Most Popular 1981 Jeep Cherokee Spark Plugs

Customize your Jeep with 32 Spark Plugs products like Spark Plugs, Spark Plug Non-Foulers, and Spark Plug Wire Set Cut To Fits, all priced under $99.99.

show more show less

from

$4.99

The Platinum Spark Plug (AP985) is expertly crafted to deliver enhanced durability and performance for older engine applications. Featuring a platinum center electrode firing tip, it ensures quicker firing, smoother starts, and improved fuel efficiency while preventing gap erosion for a longer service life. Its high alumina ceramic insulator provides superior thermal conductivity and insulation, boosting strength and reliability under demanding conditions. The extra-long projection of the center electrode design further optimizes ignition performance, while the nickel-plated shell resists corrosion for extended durability. With a multi-rib insulator to prevent flash-over and a flat seat type for secure installation, this performance-grade spark plug is built to withstand the rigors of daily driving. Whether you’re seeking better acceleration or reliable ignition, this spark plug offers exceptional value and long-lasting dependability.

Product Features:

Engineered with a platinum firing tip that prevents gap erosion for longer service life.
Its high alumina ceramic insulator provides thermal conductivity and superior insulation for increased strength.
The multi-rib insulator prevents flash-over.
Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended life.
The extra-long projection of the center electrode enhances ignition performance, ensuring smoother starts and improved fuel efficiency.

from

$9.29

The Double Platinum Power Spark Plug is engineered for drivers seeking enhanced performance and durability. Featuring a fine-wire platinum center electrode and a platinum pad ground electrode, this premium spark plug ensures greater wear resistance and sharper spark focus for reliable ignition. Its V-trimmed ground electrode design promotes a more precise spark, while the exclusive Heat-Active alloy allows the electrodes to maintain optimal operating temperatures under all engine loads. Designed as a standard replacement, it offers stable performance and improved ignitability, making it ideal for maintaining engine efficiency. With a flat seat type and integrated resistor, this spark plug delivers consistent, powerful performance, ensuring long-lasting reliability for your vehicle.

Product Features:

Double Platinum Power – Premium Spark Plug. More Powerful Performance.
Platinum center and ground electrode for greater wear resistance
Maintains stable operating temperature under all engine loads
Fine-wire center electrode for greater ignitability
V-trimmed ground electrode promotes sharper spark focus
Heat-Active alloy allows electrodes to reach optimal temperature

from

$4.99

Champion Platinum Power spark plugs are engineered to deliver exceptional performance and durability, making them a reliable choice for your vehicle. Featuring a platinum center electrode, these spark plugs ensure long-lasting service life while maintaining optimal gap specifications. The fine-wire center electrode enhances ignitability, while the V-trimmed ground electrode sharpens spark focus for efficient combustion. Constructed with exclusive Heat-Active alloy, the electrodes quickly reach optimal operating temperatures, ensuring consistent performance under various driving conditions. Designed as an original equipment replacement, these spark plugs offer seamless compatibility and reliability for your vehicle. With a nickel-tipped ground electrode and platinum-tipped center wire, they resist wear and provide dependable functionality over time. Ideal for those seeking powerful performance and extended longevity, Champion Platinum Power spark plugs are a premium solution for maintaining engine efficiency.

Product Features:

Platinum Power- Premium Spark Plug. Powerful Performance.
Platinum center electrode for long life
Fine-wire center electrode for greater ignitability
V-trimmed ground electrode promotes sharper spark focus
Heat-Active alloy allows electrodes to reach optimal temperature
Platinum tipped center wire resists wear and helps to maintain proper gap spec over life of the plug
OE Replacement: Designed as an original equipment replacement, ensuring compatibility and reliability for your vehicle.

from

$5.99

NGK V-Power spark plugs offer reliable performance and improved ignitability over standard nickel plugs. Engineered specifically for OE applications, the special V-cut nickel alloy center electrode and concave ground electrode of NGK’s V-Power spark plug increases ignitability providing quicker starts and smoother idle. NGK’s legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.

Product Features:

ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode with V-groove provides consistent performance
RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
NGK’s OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
Enhanced Ignitability: The V-cut nickel alloy center electrode and concave ground electrode design of NGK V-Power spark plugs provide quicker starts and smoother idle.
OE Application Specific: Engineered specifically for Original Equipment (OE) applications, ensuring compatibility and reliable performance.
V-Groove Tip Design: The unique V-Groove tip design of the NGK V-Power Nickel Spark Plug enhances ignitability and overall engine performance.

from

$3.99

Autolite Copper spark plugs are expertly crafted to ensure your vehicle delivers reliable performance with every start. Featuring a copper core center electrode, these plugs excel in thermal control and resist fouling, while the high nickel alloy center and ground electrodes provide extended durability. The high alumina multi-rib ceramic insulator enhances thermal conductivity and insulation, offering superior strength under demanding conditions. Designed with a corrosion-resistant nickel-plated shell, these spark plugs are built to last. Their mid-projection center electrode and flat seat type ensure optimal compatibility, while the resistor design minimizes electrical interference. Engineered for quick starts, smooth acceleration, and enhanced fuel economy, these spark plugs are a dependable choice for maintaining your vehicle’s efficiency and performance.

Product Features:

The copper core center electrode aids in thermal control and improves resistance to fouling.
Its specially engineered high nickel alloy center and ground electrode provides extended life.
The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
Quick Starts and Smooth Acceleration: Designed to deliver quick starts and smooth acceleration, ensuring a reliable performance for your vehicle.
Enhanced Fuel Economy: Engineered to provide good fuel economy, helping you save on fuel costs.

from

$3.29

The U-Groove Spark Plug with its patented U-groove ground electrode design ensures superior ignitability, allowing your engine to fire leaner mixtures for enhanced efficiency and performance. Crafted with precision machine-rolled threads, it minimizes the risk of seizing or cross-threading, making it ideal for delicate aluminum heads. Built to last twice as long as conventional plugs, this spark plug is 100% pre-fired to guarantee reliable operation from the start. Its nickel center electrode tip and flat seat type ensure consistent performance across a wide range of applications, including classic and collector cars. With a comprehensive selection of part numbers available, this spark plug delivers OE-level performance and durability, making it a dependable choice for maintaining your engine’s peak performance.

Product Features:

Patented U-groove ground electrode design fires leaner mixtures than conventional plugs
Precision machine-rolled threads reduce seizing and cross-threading in delicate aluminum heads
Wide range of part numbers for thousands of applications, including classic and collector cars
Lasts twice as long as most conventional plugs
100 percent pre-fired to assure reliable operation
U-Groove Conventional

from

$6.29

ACDelco Professional Conventional Spark Plugs are designed for reliability and efficient performance, and are a high quality replacement for many vehicles on the road today. Their high-quality copper cores and outstanding suppression characteristics deliver reliable performance. They are also available for Marine applications. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function.

Product Features:

Black Onyx coating helps reduce corrosion
Copper core provides great heat transfer and helps maximize plug durability
Ribbed suppressor seal extends resistance and helps prevent spark ‘flash over’ and misfires
Nickel-chrome alloy sheathing helps prevent corrosion on center electrode
Available for use in Marine applications
Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
Premium aftermarket replacement part
Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models

from

$4.99

The Copper Plus spark plug delivers dependable performance and durability, making it an ideal choice for maintaining your engine’s efficiency. Featuring a copper core center electrode, it ensures precise heat control for extended lifespan and consistent wear. Its nickel center electrode tip and flat seat design enhance reliability while meeting ISO and SAE Standards for proven performance. Built with superior corrosion resistance, this spark plug is designed to withstand harsh conditions, ensuring long-term functionality. As a standard replacement grade type with a resistor, it offers compatibility with a wide range of vehicles. Whether you’re looking for improved conductivity or reliable ignition, this spark plug provides excellent value and performance for your engine’s needs.

Product Features:

Copper Plus – Dependable Performance and Durability
Copper core center electrode allows for accurate control of heat range for longer life
Superior corrosion resistance
Built to ISO and SAE standards for proven performance
Built to ISO and SAE standards for proven performance
Reliable Nickel Center Electrode Tip: Featuring a nickel center electrode tip and flat seat type, this spark plug enhances reliability and helps maintain your engine’s efficiency.

from

$4.99

Platinum Spark Plug: Enhanced Durability & Improved Performance is crafted with a platinum center electrode firing tip that ensures quicker firing, smoother starts, and better acceleration while boosting fuel efficiency. Engineered with a platinum firing tip to prevent gap erosion, it offers a longer service life, making it ideal for older engine applications. The high alumina ceramic insulator enhances thermal conductivity and insulation, providing superior strength, while the multi-rib design prevents flash-over for reliable performance. Its nickel-plated shell resists corrosion, ensuring extended durability even in demanding conditions. Featuring a mid-projection standard center electrode design and a flat seat type, this performance-grade spark plug is backed by over 100 years of engineering expertise and a legacy of more than 11 billion plugs sold. Designed in the USA, it combines advanced materials like platinum and nickel to deliver consistent reliability and value for your vehicle.

Product Features:

Engineered with a platinum firing tip that prevents gap erosion for longer service life.
Its high alumina ceramic insulator provides thermal conductivity and superior insulation for increased strength.
The multi-rib insulator prevents flash-over.
Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended life.
Engineered in the USA: Backed by over 100 years of engineering expertise and a legacy of more than 11 billion plugs sold.

from

$5.29

Champion Platinum Power spark plugs are engineered to deliver exceptional performance and durability, making them an ideal choice for maintaining peak engine efficiency. Featuring a platinum center electrode, these spark plugs ensure long-lasting reliability and consistent performance. The fine-wire center electrode enhances ignitability, while the V-trimmed ground electrode sharpens spark focus for optimal combustion. Constructed with exclusive Heat-Active alloy, the electrodes quickly reach and maintain the ideal operating temperature, ensuring smooth engine operation under various conditions. The platinum-tipped center wire resists wear and helps maintain the proper gap specification throughout the plug’s lifespan. Designed as a standard replacement with a flat seat type and integrated resistor, these spark plugs are a perfect OE replacement for a wide range of engines. With a nickel ground electrode tip and a focus on precision, these spark plugs provide powerful performance and long-term value for your vehicle.

Product Features:

Platinum Power- Premium Spark Plug. Powerful Performance.
Platinum center electrode for long life
Fine-wire center electrode for greater ignitability
V-trimmed ground electrode promotes sharper spark focus
Heat-Active alloy allows electrodes to reach optimal temperature
Platinum tipped center wire resists wear and helps to maintain proper gap spec over life of the plug
Integrated Resistor and Flat Seat Type: Equipped with an integrated resistor and flat seat type, making it an ideal OE replacement for various engines.

from

$13.99

The Iridium Power Spark Plug features the world’s smallest iridium center electrode at just 0.4mm, delivering unmatched spark precision for maximum combustion efficiency. Engineered with patented 360-degree laser welding, it ensures durability and reliability even under extreme conditions, withstanding temperatures over 4000 Deg F. The U-groove and taper-cut ground electrode design enhances flame propagation, optimizing engine performance. Its burnished nickel plating provides superior resistance to high temperatures and corrosion, making it ideal for long-term use. Designed for a wide range of applications, including classic and collector cars, this spark plug offers superior performance with increased horsepower and improved fuel efficiency. Requiring 5,000 volts less to fire compared to conventional plugs, it ensures reliable starts and fewer misfires, even under heavy loads. Constructed with a durable iridium center electrode tip and a flat seat type, the Iridium Power Spark Plug guarantees long-lasting performance, making it a top choice for drivers seeking efficiency, power, and reliability.

Product Features:

World’s smallest Iridium Center Electrode (0.4mm) for improved spark for maximum combustion
Patented 360-degree laser welding assembly process
U-groove and taper cut ground electrode to maximize flame propagation.
Withstands temperatures greater than 4000 degree Fahrenheit
Burnished nickel plating for high temperature endurance and superior corrosion resistance
Wide range of part numbers for thousands of applications, including classic and collector cars
Iridium Power
Superior Performance: Patented technology allows the Iridium Power plug to outperform any other spark plug on the market, delivering more horsepower and better fuel efficiency.
Low Voltage Requirement: Requires 5,000 volts less to fire compared to conventional spark plugs, making it highly efficient and reliable under extreme conditions.
Enhanced Engine Starts: Experience faster and easier engine starts with fewer misfires, even under heavy loads, thanks to the advanced design of the DENSO Iridium Power spark plug.
Durable Iridium Material: Constructed with a durable iridium center electrode tip and a flat seat type, ensuring long-lasting performance and reliability.

from

$3.99

The copper core center electrode aids in thermal control and improves resistance to fouling.
Its specially engineered high nickel alloy center and ground electrode provides extended life.
The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
The integrated resistor minimizes electrical interference, ensuring consistent and reliable ignition performance.

from

$6.99

Double Platinum Spark Plug: Enhanced Durability & Longer Life is engineered for peak performance and reliability, making it an ideal choice for distributor-less ignition system (DIS) engines. Featuring a platinum-to-platinum design, it minimizes gap erosion and reduces misfires, ensuring consistent ignition and extended service life. The yttrium-enhanced ground electrode offers superior heat transfer, providing exceptional durability under high temperatures and pressure. Its high alumina ceramic insulator optimizes thermal conductivity and dielectric strength, while the multi-rib insulator prevents flash-over for added safety. With a standard center electrode design and extra-long projection, this spark plug delivers precise ignition performance. Both the center and ground electrode tips are crafted from platinum, ensuring unmatched durability and efficiency. Designed with a flat seat type and integrated resistor, this performance-grade spark plug is built to withstand demanding conditions while delivering reliable results. Upgrade to this spark plug for enhanced engine performance and long-lasting value.

Product Features:

Engineered with a platinum-to-platinum design that prevents gap erosion, extending the life of the spark plug.
The yttrium-Enhanced Ground Electrode delivers superior heat transfer that delivers more durability under high temps and pressure for greater life.
Its high alumina ceramic insulator provides optimum thermal conductivity and dielectric strength.
The multi-rib insulator prevents flash-over.
Designed with an integrated resistor and flat seat type to ensure reliable performance and durability under demanding conditions.

from

$5.99

NGK Standard spark plugs (in the iconic NGK ‘yellow box’ packaging) are a proven OE cornerstone and technology customers have relied on for decades. Engineered specifically for OE applications, NGK Standard spark plugs provide OE quality nickel alloy reliable performance and design. NGK’s legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance, while triple gasket sealing prevents combustion gas leakage. Solid 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.

Product Features:

ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode provides consistent performance
RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
NGK’s OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
Triple Gasket Sealing: Prevents combustion gas leakage, ensuring efficient engine performance.

from

$8.49

The Spark Plugs are the product of years of fundamental research in the combustion field. The unique patented electrode configuration of these new The spark plugs increases the amount of combustion pressure created during each power stroke of an engine, which results in a marked increase in power output, fuel economy, and reduced emissions in all gasoline engines. E3.58 is a 14mm, 0.750 reach plug with a gasket seat. E3.58 also has an additional extension, or skirt, just below the threads that extends the reach to .917. It fits a wide variety of applications, especially Jeep applications. E3.58 is widely stocked in automotive retail stores. The automotive plugs have three legs securing the Diamond FIRE electrode to the shell. This allows for excellent heat transfer, and helps to create more turbulence in the cylinder. The patented Diamond FIRE side wire is proven to increase power, reduce fuel consumption and improve hydrocarbon emissions in long-term use.

Product Features:

E3’s Diamond Fire edge to edge ground electrode provides maximum performance with increased efficiency and a faster more complete burn
Smoother Acceleration & Idle – The faster flame initiated by the spark plug results in a more complete burn of the ingested fuel charge. More pressure is created against the piston more fuel is put to work
Energy – Power output improved up to 6% on average in the typical operating ranges. Results will vary.
Efficiency – The “diamond shaped” side wire electrode projects the combustion spark in a way that more quickly ignites the air/fuel mixture, thereby creating a significantly faster and larger flame kernel. The result is that more fuel is put to work durin
E3’s patented Diamond Fire Technology provides a cleaner burning combustion, which translates into fuel savings and reduced engine carbon deposits
The Spark Plugs are pre-gapped at the factory and cannot be adjusted.
Patented Electrode Configuration: The unique patented electrode design of the E3.58 spark plugs increases combustion pressure, resulting in enhanced power output, improved fuel economy, and reduced emissions.
Extended Reach Design: The E3.58 features a 14mm, 0.750 reach plug with an additional extension that extends the reach to .917, making it suitable for a wide variety of applications, especially Jeep models.
Widely Available: The E3.58 spark plugs are widely stocked in automotive retail stores, making them easily accessible for your vehicle maintenance needs.

from

$8.49

The Spark Plugs are the product of years of fundamental research in the combustion field. The unique patented electrode configuration of these new The spark plugs increases the amount of combustion pressure created during each power stroke of an engine, which results in a marked increase in power output, fuel economy, and reduced emissions in all gasoline engines. E3.46 is a 14mm, 0.750 reach plug with a gasket seat. It fits a wide variety of applications from the 60s to early 90s, especially import. E3.46 is widely stocked in automotive retail stores. The automotive plugs have three legs securing the Diamond FIRE electrode to the shell. This allows for excellent heat transfer, and helps to create more turbulence in the cylinder. The patented Diamond FIRE side wire is proven to increase power, reduce fuel consumption and improve hydrocarbon emissions in long-term use.

Product Features:

E3’s Diamond Fire edge to edge ground electrode provides maximum performance with increased efficiency and a faster more complete burn.
Smoother Acceleration & Idle – The faster flame initiated by the spark plug results in a more complete burn of the ingested fuel charge. More pressure is created against the piston more fuel is put to work
Energy – Power output improved up to 6% on average in the typical operating ranges. Results will vary.
Efficiency – The “diamond shaped” side wire electrode projects the combustion spark in a way that more quickly ignites the air/fuel mixture, thereby creating a significantly faster and larger flame kernel. The result is that more fuel is put to work durin
E3’s patented Diamond Fire Technology provides a cleaner burning combustion, which translates into fuel savings and reduced engine carbon deposits
The Spark Plugs are pre-gapped at the factory and cannot be adjusted.
Wide Compatibility: The E3.46 spark plugs are 14mm with a 0.750 reach and a gasket seat, making them suitable for a wide range of applications from the 1960s to early 1990s, especially for import vehicles.
Widely Available: The E3.46 spark plugs are widely stocked in automotive retail stores, ensuring easy availability for consumers.

from

$71.99

ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.

Product Features:

7mm And 8mm High Gloss Silicone Jacket
450 F Rated Silicone Jacket
Stainless Steel Plug Terminals
RFI Suppression For Street Driven Applications
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles

from

$9.99

Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
Durable construction – made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$99.99

500 Ohms/ft Of Resistance
550 F Rated Silicone Jacket
Stainless Steel Plug Terminals
High RFI Suppression For Street And Strip Use
Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles
8mm High Gloss Silicone Jacket

from

$5.79

The Platinum TT Spark Plug with a Twin-Tip design is engineered to deliver superior combustion efficiency by enabling faster flame propagation for a more complete burn. Featuring a durable platinum center electrode tip, this spark plug ensures long-lasting performance and reliable ignition under various driving conditions. Its flat seat type provides a secure fit, enhancing overall engine stability and performance. Designed for precision and efficiency, this spark plug not only improves fuel combustion but also contributes to better fuel economy and reduced emissions. Ideal for drivers seeking enhanced engine responsiveness and durability, it offers exceptional value and reliability for your vehicle.

Product Features:

Twin-Tip design promotes faster flame propagation, ensuring a more complete and efficient fuel burn.
Durable platinum center electrode tip enhances longevity and provides consistent ignition performance.
Flat seat type ensures a secure fit, contributing to improved engine stability and overall performance.
Optimized combustion efficiency supports better fuel economy and reduced emissions for eco-conscious driving.
Engineered for enhanced engine responsiveness, delivering reliable performance under various driving conditions.

from

$4.99

ACDelco Gold (Professional) Conventional Spark Plugs are a high quality alternative to Original Equipment (OE) parts. These conventional spark plugs are designed for reliability and efficient performance. Their high-quality copper cores and outstanding suppression characteristics deliver reliable performance. They are also available for Marine applications. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.

Product Features:

Black Onyx coating helps reduce corrosion
Copper core provides great heat transfer and helps maximize plug durability
Available for use in Marine applications
Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
Premium aftermarket replacement part
Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
Reliable Performance: Outstanding suppression characteristics and efficient performance make these spark plugs a reliable choice for various applications, including marine.
Nickel Center Electrode Tip: Features a nickel center electrode tip for enhanced conductivity and performance.
Backed by General Motors: These premium aftermarket replacement spark plugs are backed by General Motors, ensuring quality and reliability.

from

$12.99

The Iridium TT Spark Plug delivers the perfect blend of durability and high performance, making it an ideal choice for drivers seeking reliability and power. Featuring a 0.4mm Iridium center electrode – the world’s smallest diameter – it maximizes firing potential, while the 0.7mm needle tip ground electrode promotes higher spark energy and minimizes heat quenching. Crafted with DENSO’s patented Iridium-Rhodium alloy formula, this spark plug boasts the highest concentration of Iridium for unmatched durability. Its 360-degree laser welding process ensures a robust bond and structural integrity, even under extreme conditions exceeding 4000 degrees Fahrenheit. Designed with a flat seat type for a secure fit, it offers consistent performance throughout its lifespan. Beyond power and torque, the Iridium TT enhances fuel economy and reduces emissions, allowing you to drive around the Earth over four times with improved efficiency. This spark plug is the ultimate solution for drivers demanding OE-style reliability combined with high-performance endurance.

Product Features:

0.4mm Iridium Center Electrode: World’s Smallest Diameter that maximizes firing potential
0.7mm Needle Tip Ground Electrode: Promotes higher spark energy and less heat quenching
DENSO Patented Optimized Iridium-Rhodium Alloy Formula: Highest concentration of Iridium vs. competitors for greater durability
DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
Durability of an OE style plug combined with Power and Torque of high performance.
Withstands temperatures greater than 4000 degree Fahrenheit
Iridium TT
Enhanced Fuel Economy and Lower Emissions: Drive around the Earth over 4 times with improved fuel efficiency and reduced emissions.
Reliable and Durable: The flat seat type design ensures a secure fit and consistent performance throughout its lifespan.

from

$9.99

Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, the Autolite Iridium XP spark plugs feature an iridium-enhanced 0.6mm finewire design and patented platinum sidewire technology to provide better overall durability and a more focused ignition for enhanced ignitability and performance. Features double Iridium-enhanced alloy technology center electrode for improved durability and wear resistance.

Product Features:

0.6 mm finewire design improves ignitability
Patented V-trimmed platinum sidewire technology resists wear
OE equivalent design is engineered for every engine
Designed for better overall durability with virtually no gap erosion
Double Iridium-Enhanced Alloy Technology Center Electrode: Offers improved durability and wear resistance.
Designed and Engineered in the USA: Reflects over 100 years of Autolite’s engineering experience.
Gasket Seat Type: Ensures a secure and reliable fit for optimal performance.

from

$12.99

NGK Iridium IX spark plugs are specifically designed for the performance enthusiast. Iridium IX provides outstanding acceleration, high fuel efficiency and durability. NGK Iridium IX plugs offer extreme ignitability and exceptional anti-fouling. Tapered cut ground electrode provides improved starting, idling and throttle response. The Iridium fine wire center electrode’s durability is six times harder than platinum. Iridium alloy’s extremely high melting point is perfect for today’s engines. For even greater performance consider upgrading to an NGK Ruthenium HX plug.

Product Features:

SINGLE IRIDIUM TIP: Fine wire 0.6 millimeter iridium tip center electrode ensures high durability and a consistently stable spark
IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
TAPERED CUT GROUND ELECTRODE: Reduced quenching design produces outstanding ignitability, improved acceleration, fuel efficiency and durability
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
RECOMMENDED USAGE: Modified or high performance applications, or as an upgrade to OE nickel alloy spark plugs
Outstanding Acceleration and High Fuel Efficiency: NGK Iridium IX spark plugs are engineered to deliver superior acceleration and enhance fuel efficiency, making them ideal for performance enthusiasts.
Extreme Ignitability and Anti-Fouling: These spark plugs offer exceptional ignitability and anti-fouling properties, ensuring reliable performance and longevity.

Top Picks for 1981 Jeep Cherokee Ignition Coils and Boots

Upgrade Jeep Cherokees with top-quality Ignition Coils and Boots parts, including 7 OEM and aftermarket selections for your 1981 model.

show more show less

from

$100.99

Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.

Product Features:

10-15% More Energy
Direct Plug In Replacement Direct OE Fit
Advanced Bobbin Technology
Highly Specialized Silicone Magnetic Steel Cores
Standard Motor Products SMP Dr-31
MSD 8225

from

$27.49

Product Features:

SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
EPDM inner insulation stops power-robbing voltage leaks.
With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
Excellent interference suppression and consistent performance
Easy lock terminals for more convenient installation.
Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
Broad coverage available for most vehicles on the road today
Include grease pack to ensure easy installation and removal

from

$33.99

Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$21.99

Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle¿s ignition system performance. Carquest ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
Extensive design validation testing to ensure long-lasting reliability
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$8.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$36.99

Product Features:

SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
EPDM inner insulation stops power-robbing voltage leaks.
With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
Excellent interference suppression and consistent performance
Easy lock terminals for more convenient installation.
Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
Broad coverage available for most vehicles on the road today
Include grease pack to ensure easy installation and removal

from

$46.99

Edelbrock Ignition Coil No. 22739 is a universal 12-volt cannister-style coil designed as a high-quality direct bolt-on replacement for OEM ignition coils. This advanced coil has a primary resistance of 1.4 ohms with an output of 42,000 volts. Internally, each Edelbrock Coil features heavy-duty primary and secondary windings for higher energy and greater spark that can help to provide quicker starts with improved idle quality. With a durable oil-filled housing, Edelbrock Coils are resistant to heat, shock and vibration with an effective operating range of 0 to 6,500 RPM.

Product Features:

output of 42000V

In-Demand Distributors for 1981 Jeep Cherokees

Select from 25 premium Distributors parts for your 1981 Jeep Cherokee, with prices ranging from $4.05 to $649.99.

show more show less

from

$9.99

BWD SELECT designs, specifies, and manufactures replacement parts with one goal in mind-make them the very best. To maximize performance and longevity, we use the finest materials and improve on OE specifications, whenever possible.

Product Features:

High-quality direct replacement electrical connector allows you to replace only the damaged connector instead of the entire harness for a cost-effective repair
The terminal is manufactured with high grade materials such as copper alloy, brass, and phosphor bronze. The housing is fabricated using polyamide resins. All of the materials together provide the connectors with prolonged life and superior performance.
All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
Offering thousands of high-quality pigtails & sockets for nearly every electrical job

from

$4.29

Product Features:

Fel-Pro Oil Pan SnapUps 5/16″ bolts
Designed to hold up the pan and gasket, for one person installation
Engine Saver Hardware
Unsurpassed quality you can trust
Sold in sets of four and are reusable

from

$12.99

Product Features:

High-quality direct replacement electrical connector allows you to replace only the damaged connector instead of the entire harness for a cost-effective repair
The terminal is manufactured with high grade materials such as copper alloy, brass, and phosphor bronze. The housing is fabricated using polyamide resins. All of the materials together provide the connectors with prolonged life and superior performance.
All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
Offering thousands of high-quality pigtails & sockets for nearly every electrical job

from

$97.99

Designed to meet or exceed OE specifications for fit, form and function
100% new unit with no core charges
Precision machined shafts result in high speed accuracy and help prevent bearing failures
Every distributor is tested to ensure reliable and long-lasting performance
O-rings or gaskets included where applicable
Precision Engineered ignition modules and plugs ensure proper performance plus precise connection.
Precision machined and ground shafts assure high speed accuracy and prevent bearing failures.
Original Equipment Equivalent high voltage ignition coils.
100% New Components and fasteners eliminate premature failures.

from

$649.99

There is a big following of AMC enthusiasts that are cruising a 401 equipped Javelin or trail blazing in a rock crawling Jeep with an inline 6-cylinder! MSD offers two Pro-Billet Distributors to deliver accurate trigger signals and are maintenance-free! This pick-up never requires adjustment and simply plugs right into an MSD Ignition Control. Just above it and under our strong race rotor is an adjustable mechanical advance assembly. The chro-moly weights of this assembly slide on nylon bushings producing smooth movement of the timing. You can easily adjust the curve to match your engine’s requirements with the supplied springs and stop bushings. Each precision CNC-machined billet aluminum housing features a sealed ball-bearing and long sintered bushing for stability at any rpm and increased endurance. An oversized steel shaft receives a QPQ coating to reduce friction and prevent corrosion. Both distributors are supplied with a high quality cap, rotor and gear. There is even a vacuum advance canister for street cruising economy!

Product Features:

Designed For Street/Performance Use w/Mech or Vacuum Advance
Must Be Used w/An MSD Ignition Control
Supplied w/Socket Style Distributor Cap And Rotor
Nylon pads ensure smooth operation of the advance weights
Advance weight pins are staked and tig welded to the plate
Mech. advance assem. can be locked out for crank trigger systems
Advance plate and weights are fine blanked from chrome moly steel
QPQ coated for friction reduction

from

$5.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$16.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$52.99

All of the Street Fire components are spec’d by MSD engineers and designed to provide performance for the price. The quality of each part is backed up with a one year warranty!

Product Features:

Supplied w/Heavy Duty Rotor
Low Resistance Terminals
Full Power Output At High RPM
Perfect For Budget Minded Enthusiasts

from

$4.05

Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:

Direct-fit OE replacement ensures ease of installation
Designed to meet OE performance
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need

from

$13.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$4.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$12.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$26.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$7.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$102.99

Designed to meet or exceed OE specifications for fit, form and function
100% new unit with no core charges
Precision machined shafts result in high speed accuracy and help prevent bearing failures
Every distributor is tested to ensure reliable and long-lasting performance
O-rings or gaskets included where applicable

from

$433.99

Plug n’ Play billet distributors are designed for maximum ignition performance at a price you can afford. Our distributors ship with Ignitor II technology modules. Replace your outdated points, electronic distributor or bulky HEIs with this performance

Product Features:

PerTronix D160810 Flame-Thrower Electronic Distributor Billet AMC V8 Plug and Play with Ignitor II Technology Non Vacuum Advance Black Male Cap
Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.

from

$52.99

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.

Product Features:

Distributor Mounted
OE Style
Direct Fit

Max-Fire Distributor for AMC/Jeep 290-401 V8

from

$482.99

Edelbrock part No. 22765 Max-Fire distributor for AMC/Jeep 290-401 V-8 engines is ready to run right out-of-the-box and are the perfect upgrade for your ignition system. They’re ideal for replacing or upgrading from a points triggered distributor. They feature precision machining for a perfect fit along with a simple three wire hook up for an easy installation with no need to run an external ignition control box. The centerless ground shaft utilizes an upper sealed roller bearing with an extra long lower bronze Oil-Lite bushing for smooth operation. The high output magnetic pickup and large paddle wheel reluctor deliver a strong trigger signal at high RPM for maximum performance. All of these features allow Max-Fire distributors to provide unrivaled voltage to the coil, ensuring that you’re getting maximum performance from your engine. We recommend a new Max-Fire coil for maximum voltage output, ensuring you get the most from your high performance engine at higher RPM’s. Each distributor includes a cap, rotor, retainer and mechanical advance curve kit. FEATURES AND BENEFITS: – CNC machined from 6061-T6 aluminum with O-ring grooves for use in a fully machined engine block – Cap and rotor are molded in high quality 30% glass filled polyester for durability and carbon tracking resistance – Features brass contacts and a stainless steel rotor spring for maximum conductivity – Hardened iron drive gear ensures long service life – Fully adjustable mechanical and vacuum advance for increased mileage potential

from

$433.99

PerTronix D160811 Flame-Thrower Electronic Distributor Billet AMC V8 Plug and Play with Ignitor II Technology Non Vacuum Advance Red Male Cap
Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.

from

$433.99

PerTronix D160801 Flame-Thrower Electronic Distributor Billet AMC V8 Plug and Play with Ignitor II Technology Non Vacuum Advance Red Cap
Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.

from

$402.99

PerTronix D160710 Flame-Thrower Electronic Distributor Billet AMC V8 Plug and Play with Ignitor II Technology Vacuum Advance Black Male Cap
Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.

from

$398.99

PerTronix D160701 Flame-Thrower Electronic Distributor Billet AMC V8 Plug and Play with Ignitor II Technology Vacuum Advance Red Cap
Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.

from

$398.99

PerTronix D160700 Flame-Thrower Electronic Distributor Billet AMC V8 Plug and Play with Ignitor II Technology Vacuum Advance Black Cap
Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.

from

$14.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

Most Sold 1981 Jeep Cherokee Ignition Wires

Explore our best-selling Jeep parts for the 1981 Cherokee among 7 OEM and aftermarket options starting from $71.99.

show more show less

from

$153.99

Most Advanced Wire By Mallory
RFI Suppression
High Temperature Silicone Jacket
Withstands Over 500+F
Come In Ready To Use Kits
Extra Long Kits

from

$110.99

500 Ohms/ft Of Resistance
550 F Rated Silicone Jacket
Stainless Steel Plug Terminals
High RFI Suppression For Street And Strip Use
Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles
8mm High Gloss Silicone Jacket

from

$133.99

Most Advanced Wire By Mallory
RFI Suppression
High Temperature Silicone Jacket
Withstands Over 500+F
Come In Ready To Use Kits
Extra Long Kits

from

$88.99

Most modern electronic ignition systems require suppression style wires to preserve sensitive components. Flame-Thrower 8mm Custom fit MAGx2 wires provide enhanced RFI suppression and dual current paths for more power delivered to the spark plug. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cutting, crimping and splicing.

Product Features:

Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
Low 500 ohm per foot resistance.
8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
Fiberglass reinforcing braid for added strength and flexibility.

from

$71.99

7mm And 8mm High Gloss Silicone Jacket
450° F Rated Silicone Jacket
Stainless Steel Plug Terminals
RFI Suppression For Street Driven Applications
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction

from

$90.99

Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
Low 500 ohm per foot resistance.
8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
Fiberglass reinforcing braid for added strength and flexibility.

from

$184.99

The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:

Bolt-on Performance
Custom Fit For Make And Model Listed
Wires Are Pre-Cut To Exact Specifications
Conductor core features DuPont Kevlar material for increased tensile strength
Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately

Top-Rated Ignition and Tune-Up Products Brands For Your 1981 Jeep Cherokee

Shop for the best-rated brands offering Ignition and Tune-Up Products and other products for your 1981 Jeep Cherokees. Below you’ll find some of our best rated Ignition and Tune-Up Products from Champion, Autolite, and Carquest, and more. Ignition and Tune-Up Products from these brands that fit a 1981 Cherokee start at just $3.99 and are rated as high as 4.7 stars. OEM and aftermarket Ignition and Tune-Up Products don’t get more top quality, durable, and affordable than from the brands below.

Popular Champion 1981 Jeep Cherokee Ignition and Tune-Up Products

When it comes to maintaining or upgrading your 1981 Jeep Cherokee, using quality Ignition and Tune-Up Products is essential to ensure durability and a perfect fit. Champion ticks all of those boxes. We offer a wide selection of Champion Ignition and Tune-Up Products, specifically designed for the 1981 Jeep Cherokee. With over 3 Champion brand Ignition and Tune-Up Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $4.99, with an average price of just $6.42. Plus, with over 53 customer reviews and an average rating of 4.7 stars, you can trust that our Champion Ignition and Tune-Up Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $4.99

(29)

Platinum Power Spark Plug (RC12PEC5): Powerful Performance & Longevity

“Good price”

from $4.99

(3)

Copper Plus Spark Plug (RN14YC): Dependable Performance & Durability

“Fine”

from $9.29

(21)

Double Platinum Power Spark Plug (RC12PEPB5): Powerful Performance & Durability

“Ordered on line and picked up at store within 15 minutes, plus 20% off order.”

Popular Autolite 1981 Jeep Cherokee Ignition and Tune-Up Products

Autolite auto parts is one of the highest quality Ignition and Tune-Up Product brands in the market. Any 1981 Jeep Cherokee owner should feel confident when installing genuine Autolite parts in their vehicle. To ensure the best fit and performance for your 1981 Cherokee, Advance Auto Parts carries a full inventory of 3 Autolite Ignition and Tune-Up Products. Plus you will be keeping your Jeep in peak condition while saving money because prices on these Autolite Ignition and Tune-Up Products range from $3.99 to $4.99, plus, with more than 201 customer reviews and an impressive 4.6 stars average rating, you can be confident the Fram Ignition and Tune-Up Products below will deliver on both quality and value.

from $4.99

(126)

Platinum Spark Plug: Enhanced Durability & Improved Performance

“Good”

from $4.99

(69)

Platinum Spark Plug (AP985): Enhanced Durability & Performance

“Vintage Jeep application”

from $3.99

(6)

Copper Resistor Spark Plug: Quick Starts & Smooth Acceleration

“Perfect”

FAQs for 1981 Jeep Cherokee Ignition and Tune-Up Products

Which Ignition and Tune-Up Products are best-sellers for 1981 Jeep Cherokees?

Out of 94 Ignition and Tune-Up Products that fit 1981 Jeep Cherokees, the following parts are the top sellers:

Iridium XP Fine wire Spark Plug: Improved Durability, More Focused Ignition (15650208) – $9.99
Platinum Power Spark Plug (RC12PEC5): Powerful Performance & Longevity (5470032) – $4.99
V-Power Nickel Spark Plug (GR4): Enhanced Ignitability & Performance (19650104) – $5.99

What’s the price range for 1981 Jeep Cherokee Ignition and Tune-Up Products?

Ignition and Tune-Up Product prices for the 1981 Jeep Cherokee start at $3.29 and go up to $649.99 for the most premium parts.

What’s the average price of a Ignition and Tune-Up Product for a 1981 Jeep Cherokee?

The average price for Ignition and Tune-Up Products for the 1981 Jeep Cherokee is $87.85. Keep in mind the variety of part types within our Ignition and Tune-Up Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Ignition and Tune-Up Products for other Jeep Cherokee model years?

Yes, we currently carry Ignition and Tune-Up Products for 36 model years of Jeep Cherokees between 1974 and 2023. Ignition and Tune-Up Products are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Ignition and Tune-Up Products for my 1981 Jeep Cherokee?

The cheapest 1981 Jeep Cherokee Ignition and Tune-Up Products we carry in stock are:

U-Groove Spark Plug: OE Performance, W16EXR-U (20650369) – $3.29
Copper Resistor Spark Plug: Quick Starts & Enhanced Durability (5390702) – $3.99
Copper Resistor Spark Plug: Quick Starts & Smooth Acceleration (5390222) – $3.99
U-Groove Spark Plug: OE Performance, QJ16HR-U (20650519) – $3.99
Distributor Rotor (11440037) – $4.05

What are the top-rated Ignition and Tune-Up Products that fit the 1981 Jeep Cherokee?

Out of 1,228 reviews by customers, our 1981 Jeep Cherokee Ignition and Tune-Up Products have an average customer rating of . These are some of the highest-rated Ignition and Tune-Up Product types for the 1981 Jeep Cherokee and their top-rated products:

Ignition Coils and Boots
- High Energy Ignition Coil for GM HEI – 1973-1991 (6900054) – $100.99
- Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit (19250131) – $27.49
Ignition Switches
- High Energy Ignition Coil for GM HEI – 1973-1991 (6900054) – $100.99
- Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit (19250131) – $27.49
Spark Plugs
- High Energy Ignition Coil for GM HEI – 1973-1991 (6900054) – $100.99
- Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit (19250131) – $27.49

What types of Ignition and Tune-Up Products do you sell for my 1981 Jeep Cherokee?

As of 11/2/25, these are some of the most in-demand types of Ignition and Tune-Up Products for a 1981 Jeep Cherokee:

Can I get help with 1981 Jeep Cherokee Ignition and Tune-Up Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jeep Ignition and Tune-Up Products and more.

What is your return policy for Jeep Cherokee Ignition and Tune-Up Products?

Advance Auto Parts keeps returns simple. For new Jeep Cherokee Ignition and Tune-Up Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1981 Jeep Cherokee Ignition and Tune-Up Products

Felpro – Distributor Mounting Gasket (Part No.70051)

Dorman – Help – Spark Plug Non-Foulers – 14mm Gasket Seat Long Reach (Part No.42004)

Crown Auto Jeep Replacmnt – Direct-Fit, Column Mounted (Part No.J8128889)

Omix – Distributor Cap; 91-93 Jeep Wrangler YJ (Part No.17244.10)

PerTronix – FO-181 Ignitor Ford Electronic Distributor 8 cyl (Part No.FO-181)

Carquest Premium – Distributor T4694: 100% New, With Cap and Rotor (Part No.T4694)

Mallory – Mallory Prosidewinder 135F Univ/Wire Set (Part No.947)

Carquest Premium – Distributor Cap Carbon Button (Part No.CAA1216)

Carquest Premium – Ignition Module (Part No.CBG1095)

Omix – Ignition Switch; 97-01 Jeep Wrangler TJ (Part No.17251.07)

Carquest Premium – Distributor Reluctor (Part No.REA1001)

Carquest Premium – Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit (Part No.35-8101)

Delphi – Ignition Coil (Part No.GN10359)

Carquest – Contact Set (Points) (Part No.A109V)

Omix – Ignition Lock with Keys; 90-96 Jeep Cherokee/Wrangler YJ (Part No.17250.05)

Sylvania – 194 ZEVO: White LED Mini Bulb, Super Bright, 2 Pack (Part No.194LED.BP2)

Carquest Premium – Multi-Use Connector (Part No.PTA1162)

Accel – 8Mm Super Stock Spiral Uni Bk (Part No.5040K)

Crown Auto Jeep Replacmnt – OE Replacement (Part No.83510055)

Carquest Premium – Distributor Ignition Pickup (Part No.MEA2314)

Autolite – Copper Resistor Spark Plug: Quick Starts & Enhanced Durability (Part No.985)

Omix – Distributor Drive Gear; 72-91 Jeep CJ/Wrangler YJ (Part No.17423.02)

Carquest Premium – Multi-Use Connector (Part No.PTA1354)

Carquest Premium – Coil On Plug Insulator Boot: Spring included, Designed for direct fit (Part No.35-7016)

Carquest Premium – Spark Plug Wire Set: 5 Wires, Increased performance, Designed for direct fit (Part No.35-4141)

Carquest Premium – Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit (Part No.35-6310)

Carquest Premium – Distributor Rotor (Part No.DAA1089)

Carquest – Distributor Rotor (Part No.23A1023)

Accel – 8Mm Super Stock Spiral Uni Bu (Part No.5040B)

Accel – Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set (Part No.4040)

Accel – Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set (Part No.4040R)

Accel – Universal Fit 300+ Race Spark Plug Wire Set (Part No.7040)

Autolite – Platinum Spark Plug (AP985): Enhanced Durability & Performance (Part No.AP985)

Champion – Double Platinum Power Spark Plug (RC12PEPB5): Powerful Performance & Durability (Part No.7034)

Champion – Platinum Power Spark Plug (RC12PEC5): Powerful Performance & Longevity (Part No.3034)

NGK – V-Power Nickel Spark Plug (GR4): Enhanced Ignitability & Performance (Part No.2635)

Autolite – Copper Resistor Spark Plug: Quick Starts & Smooth Acceleration (Part No.65)

DENSO – U-Groove Spark Plug: OE Performance, W16EXR-U (Part No.3031)

ACDelco – Conventional Spark Plug: Reliable Performance & Durability (Part No.R44XLS)

Champion – Copper Plus Spark Plug (RN14YC): Dependable Performance & Durability (Part No.405)

Autolite – Platinum Spark Plug: Enhanced Durability & Improved Performance (Part No.AP65)

Champion – Platinum Power Spark Plug (RN14PMC): Powerful Performance & Durability (Part No.3405)

DENSO – Iridium Power Spark Plug: Maximum Spark Energy, 0.4mm Iridium Tip, IW16 (Part No.5305)

Autolite – Copper Resistor Spark Plug: Quick Starts & Enhanced Durability (Part No.985)

Autolite – Double Platinum Spark Plug: Enhanced Durability & Longer Life (Part No.APP985)

NGK – Standard Nickel Spark Plug (BPR4ES): Reliable OE Performance (Part No.6578)

E3 – DiamondFire Spark Plug: Enhanced Power & Fuel Efficiency (Part No.E3.58)

E3 – DiamondFire Spark Plug (E3.46): Enhanced Power & Fuel Efficiency (Part No.E3.46)

Accel – 8Mm Super Stock Graphite Uni (Part No.4040B)

Dorman – Help – Spark Plug Non-Foulers – 14mm Gasket Seat Long Reach (Part No.42004)

Accel – 8Mm Super Stock Spiral Uni Bk (Part No.5040K)

DENSO – Platinum TT Spark Plug – PW16TT (Part No.4501)

ACDelco – Conventional Copper Core Spark Plug: Reduces Corrosion & Maximizes Durability (Part No.41-631)

DENSO – Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, IW16TT (Part No.4708)

Autolite Iridium – Iridium XP Fine wire Spark Plug: Improved Durability, More Focused Ignition (Part No.XP985)

NGK – Iridium IX Spark Plug (GR4IX): Extreme Ignitability & Durability (Part No.97382)

Accel – High Energy Ignition Coil for GM HEI – 1973-1991 (Part No.140003)

Carquest Premium – Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit (Part No.35-6309)

Carquest Premium – Ignition Coil (Part No.EBC1717)

Carquest – Ignition Coil: Meets OE Specifications, 1 Count (Part No.26C1073)

Carquest Premium – Multi-Use Connector (Part No.PTC1111)

Carquest Premium – Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit (Part No.35-8101)

Edelbrock – Ignition Coil No. 22739 12V Cannister Style, 1.4 Ohm Primary Resistance (Part No.22739)

Carquest – Distributor Rotor (Part No.D198)

Felpro – Distributor Mounting Gasket (Part No.70051)

Carquest – Distributor Rotor (Part No.D197)

Carquest Premium – Distributor T4691: 100% New, With Cap and Rotor (Part No.T4691)

MSD Ignition – Distributor; 6-cyl. AMC Jeep 232-258; 4.0L (Part No.8516)

Carquest Premium – Distributor Rotor (Part No.DAA1002)

Carquest Premium – Distributor Cap (Part No.CAC1056)

MSD Ignition – Cap/Rotor Kit; Street Fire; Ford V8; Socket (Part No.5506)

Driveworks – Distributor Rotor (Part No.23050)

Carquest – Distributor Cap (Part No.24C1021)

Carquest – Distributor Rotor (Part No.23A1015)

Carquest Premium – Distributor Rotor (Part No.DAA1008)

Carquest Premium – Distributor Cap (Part No.CAC1063)

Carquest – Distributor Rotor (Part No.23A1023)

Carquest Premium – Distributor T4891: 100% New, With Cap and Rotor (Part No.T4891)

PerTronix – Flame-Thrower Electronic Distributor Billet (Part No.D160810)