1981 GMC K2500 Wheels and Tires
More 1981 GMC K2500 Wheels and Tires Categories
If you’re looking for an original Wheels and Tires replacement for a 1981 GMC K2500, you can search through our selection below. You’ll also find aftermarket and OEM Wheels and Tires to meet your needs.
Essential 1981 GMC K2500 Wheels and Tires
Driveworks – Taper Bearing Set (Part No.S-A-38)
from
$13.79
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Multi Purpose Seal (Part No.710106)
from
$8.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Schrader – Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 12 Piece (Part No.33500-12)
from
$361.99
Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.
Product Features:
See More
Product Features:
- MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
- COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
- DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
- COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
KAI – Wheel Housing (Part No.RRP413)
from
$109.99
New Standard Replacement Driver Side Rear Inner Wheelhouse
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Schrader – Programmable Tire Pressure Sensor (TPMS): Adj. Angle Clamp-In Alum Valve, 1 Pc (Part No.33700)
from
$51.99
Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.
Product Features:
See More
Product Features:
- MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
- COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
- DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
- COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
- ADJUSTABLE: 0-40 degree adjustable stem fits into more aftermarket rim sets
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Schrader – Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece (Part No.33500)
from
$41.99
Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.
Product Features:
See More
Product Features:
- MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
- COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
- DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
- COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Dorman – Wheel Lug Nut Lock Set: M14-1.50 Thread, Conical 60, Duplex Acorn, 2.05" L, Chrome, 4 Locks/1 Key (Part No.711-624)
from
$19.29
Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.
Product Features:
See More
Product Features:
- Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
- Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
- Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
McGard – Cone Seat- Under Hub Cap Wheel Lock Set (1/2"-20 Thread Size) – Set of 4 Locks and 1 Key (Part No.24010)
from
$44.99
Protecting the world’s finest wheels and tires from theft since 1964. McGard manufactures wheel locks in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- For use under wheel covers, center caps and hub caps.
- Can also be used for exposed applications with optional (70005) black or (70006) chrome caps.
Dorman – Wheel Stud: Serrated, 9/16-18 Thread Size, Right Hand Thread (Sold by each) (Part No.610-188)
from
$4.99
These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.
Product Features:
See More
Product Features:
- Durable material – carbon steel meets SAE automotive industry standards for strength and hardness
- Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
- Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
- Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
Dorman – M14-1.50 Serrated Wheel Stud – 16.00mm Knurl, 45.5mm Length (Part No.610-327)
from
$3.49
These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.
Product Features:
See More
Product Features:
- Durable material – carbon steel meets SAE automotive industry standards for strength and hardness
- Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
- Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
- Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
McGard – Black Cone Seat Wheel Installation Kit for 8 Lug Vehicles (9/16"-18 Thread Size) (Part No.84844)
from
$714.99
The convenient way to order wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. McGard manufactures wheel locks and lug nuts in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts are guaranteed for life not to rust, chip or peel. Designed and built for the real world. Think about it: harsh elements, nasty corrosive wheel cleaners, overzealous impact guns, loose fitting lug wrenches and lead-foot drivers. This kind of treatment destroys ordinary lug nuts. McGard lug nuts can take the punishment and keep your wheels looking beautiful. This product may contain globally sourced materials/components.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
- For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
- Set of 28 Lug Nuts, 4 Wheel Locks, 1 Key, & 1 Key Storage Pouch
McGard – Black SplineDrive 8 Lug Wheel Installation Kit (M14 x 1.5 Thread Size) (Part No.65810BK)
from
$454.99
The convenient way to order Tuner wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. Why settle for ordinary lug nuts? SplineDrive Lug Nuts combine style and performance. A no-compromise design engineered to fit small diameter recesses in Tuner style wheels. SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they are 30% lighter in weight. Like all McGard lug nuts, the chrome plating is guaranteed for life not to rust, chip or peel. The easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts and wheel locks are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- For aluminum wheels only.
- Set of 28 Lug Nuts, 1 Installation Tool, 4 Wheel Locks, 1 Key, & Key Storage Pouch
National – Bearings (Part No.387AS)
from
$18.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
MOOG Hub Assemblies – Hub and Bearing Assembly (Part No.515018)
from
$229.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- MOOG hub assemblies are performance proven, quality tested and are available for a broad range of foreign and domestic vehicles.
- Engineered to overcome problems and deliver smooth, reliable performance.
- Application specific design
- Application specific design
Yukon Gear – Outer Wheel Bearing Retaining Snap Ring For GM 14T (Part No.33370)
from
$49.99
Outer wheel bearing retaining snap ring for GM 14T.
Product Features:
See More
Product Features:
- Outer wheel bearing retaining snap ring
- Fits GM 10.5″ 14 bolt truck
COAST TO COAST – Chrome Plated With 4X4 Logo On 4, Aluminum, Set Of 4 (Part No.IWCC2040R)
from
$129.99
Coast to Coast International aftermarket center caps are a quick and cost effective alternative to replacing OEM center caps that have been lost, stolen or worn over time. With a wide variety of designs and finishes, it is easy to find a style that is right for any vehicle. All Coast to Coast International products feature a limited lifetime warranty.
Product Features:
See More
Product Features:
- Designed And Manufactured To Fit Directly Into The OEM Wheel
- Constructed From High-Quality, Durable, Automotive Grade ABS
- Two Layers Of Clear Coat Enhance And UV Protect The Finish
- A Cost Effective Alternative To Replace OEM Center Caps That Have Been Lost, Stolen Or Worn Over Time
- Installs In Minutes Without Tools And Stays Securely Attached Until Removed
National – Bearings (Part No.LM102949)
from
$18.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Multi Purpose Bearing (Part No.RP-1561-GM)
from
$54.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Designed to be used on worn axle shafts
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Premium double seal design keeps out dirt and contaminants and retains lubrication
- Industry leading coverage
- Professional technicians know they can depend on National
McGard – Chrome Cone Seat Wheel Installation Kit for 8 Lug Vehicles (9/16"-18 Thread Size) (Part No.84834)
from
$449.99
The convenient way to order wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. McGard manufactures wheel locks and lug nuts in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts are guaranteed for life not to rust, chip or peel. Designed and built for the real world. Think about it: harsh elements, nasty corrosive wheel cleaners, overzealous impact guns, loose fitting lug wrenches and lead-foot drivers. This kind of treatment destroys ordinary lug nuts. McGard lug nuts can take the punishment and keep your wheels looking beautiful. This product may contain globally sourced materials/components.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
- Set of 28 Lug Nuts, 4 Wheel Locks, 1 Key, & 1 Key Storage Pouch
McGard – Gold SplineDrive 8 Lug Wheel Installation Kit (M14 x 1.5 Thread Size) (Part No.65810GD)
from
$494.99
The convenient way to order Tuner wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. Why settle for ordinary lug nuts? SplineDrive Lug Nuts combine style and performance. A no-compromise design engineered to fit small diameter recesses in Tuner style wheels. SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they are 30% lighter in weight. Like all McGard lug nuts, the chrome plating is guaranteed for life not to rust, chip or peel. The easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts and wheel locks are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- For aluminum wheels only.
- Set of 28 Lug Nuts, 1 Installation Tool, 4 Wheel Locks, 1 Key, & Key Storage Pouch
COAST TO COAST – Two Open Style Caps, Chrome Plated, Abs Plastic, Bolt-On, Set Of 4 (Part No.IWCC2040)
from
$139.99
Coast to Coast International aftermarket center caps are a quick and cost effective alternative to replacing OEM center caps that have been lost, stolen or worn over time. With a wide variety of designs and finishes, it is easy to find a style that is right for any vehicle. All Coast to Coast International products feature a limited lifetime warranty.
Product Features:
See More
Product Features:
- Designed And Manufactured To Fit Directly Into The OEM Wheel
- Constructed From High-Quality, Durable, Automotive Grade ABS
- Two Layers Of Clear Coat Enhance And UV Protect The Finish
- A Cost Effective Alternative To Replace OEM Center Caps That Have Been Lost, Stolen Or Worn Over Time
- Installs In Minutes Without Tools And Stays Securely Attached Until Removed
COAST TO COAST – For 16 Inch Wheels, Machined, Aluminum, Set Of 4 (Part No.IWCC5015A)
from
$94.99
Coast to Coast International aftermarket center caps are a quick and cost effective alternative to replacing OEM center caps that have been lost, stolen or worn over time. With a wide variety of designs and finishes, it is easy to find a style that is right for any vehicle. All Coast to Coast International products feature a limited lifetime warranty.
Product Features:
See More
Product Features:
- Designed And Manufactured To Fit Directly Into The OEM Wheel
- Constructed From High-Quality, Durable, Automotive Grade ABS
- Two Layers Of Clear Coat Enhance And UV Protect The Finish
- A Cost Effective Alternative To Replace OEM Center Caps That Have Been Lost, Stolen Or Worn Over Time
- Installs In Minutes Without Tools And Stays Securely Attached Until Removed
Dorman – Wheel Lug Nut: M14-1.50 Thread, Conical 60, Bulge Acorn, 1.39" Length, Chrome, 1 Pack (Part No.611-186.1)
from
$3.49
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.
Product Features:
See More
Product Features:
- Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
- Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – Wheel Lug Nut: M14-1.50 Thread, Conical 60, Acorn, 1.38" Length, Chrome (Sold by each) (Part No.611-185)
from
$3.29
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.
Product Features:
See More
Product Features:
- Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
- Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – Wheel Lug Nut: M14-1.50 Thread, Conical 60, Bulge Acorn, 1.39" Length, Chrome (Sold by each) (Part No.611-186)
from
$3.49
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.
Product Features:
See More
Product Features:
- Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
- Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
National – Multi Purpose Seal (Part No.710105)
from
$15.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Recognized worldwide for their quality and reliable performance for every type of repair
- Delivers quality and reliable performance for every type of repair
Driveworks – Oil Seal (Part No.S-710105)
from
$9.49
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Driveworks – Oil Seal (Part No.S-2081)
from
$7.79
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Popular 1981 GMC K2500 Wheels and Tires Categories
1981 GMC K2500 Wheels and Tires
You count on your 1981 GMC K2500 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Wheels and Tires. With 54 Wheels and Tires ranging in price from $2.29 to $734.99, you’re sure to find everything you need for your 1981 GMC K2500.
Brands matter. If you want to shop a specific Wheels and Tires brand, we stock 8 different brands like Schrader, National, and Dorman. 1981 GMC K2500 Wheels and Tires start as low as $2.29!
One of the best ways to find top quality OEM or aftermarket Wheels and Tires is by asking professionals. Short of that, you can shop with confidence thanks to our 405 extensive product reviews on 1981 GMC K2500 Wheels and Tires. Some of the top-rated Wheels and Tires products we carry are Bearings with 4.3 stars and Bearings with 4.7 stars.
Did we mention you can order your Wheels and Tires from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Wheels and Tires inventory for your 1981 GMC K2500 below to get started!
Top-Rated Wheels and Tires Brands For Your 1981 GMC K2500
Trusted Wheels and Tires OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1981 GMC K2500 running right for years to come. In our inventory you’ll find brands like Schrader, National, Dorman, and even more.
Popular National Wheels and Tires
You’ll find popular National brand products across Wheel Bearings and Wheel Seals. All are waiting to get your 1981 GMC K2500 back on the road. Some of the top-rated National products in these categories are:
Top-Rated Wheels and Tires
If are what you’re looking for, our inventory holds plenty. We stock brand Wheels and Tires for your 1981 GMC K2500, and some of our most reviewed parts include:
from
$41.99
(70)
Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece
Remote Tire Pressure Sensors
FAQs for 1981 GMC K2500 Wheels and Tires
What are the most purchased Wheels and Tires for the 1981 GMC K2500?
Out of 54 Wheels and Tires for the 1981 GMC K2500, the most popular in our inventory are:
from
$51.99
This product is not rated
Programmable Tire Pressure Sensor (TPMS): Adj. Angle Clamp-In Alum Valve, 1 Pc
Remote Tire Pressure Sensors
from
$2.29
This product is not rated
Wheel Lug Nut: 9/16-18 Thread, Conical 60, Standard, 0.75" Length, Zinc (Sold by each)
Wheel Lug Nuts
What are the top-rated 1981 GMC K2500 Wheels and Tires?
Top-rated Wheels and Tires for your 1981 GMC K2500 based on customer reviews/ratings are:
from
$18.99
(7)
Bearings
“Good bearings ,fit my rear hubs on 02 Chevy k 2500hd perfectly .I have used these bearings and seals many times over the years. They come with a 3 yea”
from
$20.99
(3)
Bearings
“Needed an inner bearing when doing brakes on an old hunting truck.I prefer quality parts over those made in other countries and the price difference w”
