1981 Dodge W350 Differentials

Essential 1981 Dodge W350 Differentials

Yukon Gear – Pinion Install Kit For Dana 70 Differential (Part No.13033)

Pinion Install Kit For Dana 70 Differential

from

$284.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Dana Spicer 70
  • Included are pinion bearings and races, pinion seal, pinion nut, complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – Ring Gear Bolt For Chrysler 9.25" Rear (Part No.33033)

Ring Gear Bolt For Chrysler 9.25" Rear

from

$9.99
Ring gear bolt for Chrysler 9.25″ rear, 7/16″ x 18.

Product Features:
  • Ring gear bolt for Chrysler 9.25″ rear
See More

Yukon Gear – Replacement Powr Lok Carrier Case For Dana 70, 4.10 & Down (Part No.20032)

Replacement Powr Lok Carrier Case For Dana 70, 4.10 & Down

from

$869.99
Yukon replacment Powr Lok carrier case for Dana 70, 4.10 & down (incl ABS).

Product Features:
  • Powk Lok positraction carrier case
  • Does not include spider gears
  • Fits Dana Spicer 70
  • 4.10 and down ratio only
  • ABS and non-ABS compatible
See More

Yukon Gear – Dana 60 & Dana 70 Power Lok Case Bolt (Part No.33236)

Dana 60 & Dana 70 Power Lok Case Bolt

from

$7.99
Dana 60 & Dana 70 Power Lok case bolt.

Product Features:
  • Power Lok case bolt for Dana Spicer 60 and 70
  • 7/16 x 14 thread
  • 3.5″ long
  • 9/16″ hex head
See More

Yukon Gear – Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng (Part No.33327)

Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng

from

$7.99
Dana 50 Dana 60 Dana 70 & Dana 80 roll PIN, 0.225″ DIA, for X/P shaft, 1.87″ LNG.

Product Features:
  • Roll pin for Dana Spicer 50, 60, 70, 70U, 70HD and 80
  • 0.225″ diameter
  • 1.870″ long
See More

Yukon Gear – Forged Replacement Yoke For Dana 60, Stronger Than Billet, With A 1350 U/Joint Size (Part No.41029)

Forged Replacement Yoke For Dana 60, Stronger Than Billet, With A 1350 U/Joint Size

from

$266.99
Yukon forged replacement yoke for Dana 60, stronger than billet, with a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Dana Spicer 60, 70, 70U and 70HD
  • 29 spline
  • 1350 u-joint size
  • 3.625″ snap ring span
  • 1.188″ cap diameter
  • Outside snap ring design
  • U-bolt style
See More

Yukon Gear – Replacement Inner Slinger For Dana 60 (Part No.33014)

Replacement Inner Slinger For Dana 60

from

$9.99
Product Features:
  • Inner oil slinger for Dana Spicer 60
See More

Yukon Gear – Replacement Positraction Internals For Dana 60 And 70 With 35 Spline Axles (Part No.16008)

Replacement Positraction Internals For Dana 60 And 70 With 35 Spline Axles

from

$832.99
Yukon replacement positraction internals for Dana 60 and 70 with 35 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit includes clutches. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Clutch kit
  • Fit Dana Spicer 60 Powr Lok positraction with 35 spline axles
  • Smooth design
  • Includes two side gears, four pinion gears, cross pin shafts and side gear thrust washers.
See More

Motive Gear – Differential Pinion Shim Kit (Part No.1118)

Differential Pinion Shim Kit

from

$6.49


Product Features:
  • DANA PRELOAD SHIMS (D60 & D70)
See More

Driveworks – Tapered Roller Bearing (Part No.S-HM-803110)

Tapered Roller Bearing

from

$13.49
Product Features:
  • Brand may vary by location
See More

Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)

Dana 60, Dana 70 & Dana 80 Cover Bolt

from

$5.99
3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.

Product Features:
  • Cover bolt for Dana Spicer 60, 70 and 80
  • 3/8″
See More

Yukon Gear – Pinion Nut For Dana 44 JK, 44HD, 60, 70, 70U, 70HD & Nissan Titan Rear 1 5/16" Nut 7/8" X 14 Thread (Part No.33144)

Pinion Nut For Dana 44 JK, 44HD, 60, 70, 70U, 70HD & Nissan Titan Rear 1 5/16" Nut 7/8" X 14 Thread

from

$7.99
Replacement pinion nut for Dana 44 JK, 44HD, 60, 70, 70U, 70HD & Nissan Titan rear. 1 5/16″ nut, 7/8″ x 14 thread.

Product Features:
  • Pinion nut for Jeep JK rear, Dana Spicer 44HD, 60, 70, 70U, 70HD and Nissan Titan rear
  • 7/8″ x 14 thread
  • 1 5/16″ socket
See More

USA Standard Gear – Replacement Spider Gear Set For Dana 60, 35 Spline (Part No.39009)

Replacement Spider Gear Set For Dana 60, 35 Spline

from

$198.99
Product Features:
  • Spider gear kit
  • Fits Dana Spicer 60, 35 spline open differential
  • Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

Yukon Gear – Steel Cover For Chrysler 9.25" Rear (Part No.32314)

Steel Cover For Chrysler 9.25" Rear

from

$93.99
Product Features:
  • Fits Chrysler 9.25″ rear
  • Steel
See More

Yukon Gear – Minor Install Kit For Dana 60 And 61 Front Differential (Part No.12077)

Minor Install Kit For Dana 60 And 61 Front Differential

from

$169.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

Product Features:
  • Fits Dana Spicer 60 front
  • Included are a pinion seal, axle seals, crush sleeve , complete shim kit, marking compound and brush.
See More

USA Standard Gear – Replacement Ring & Pinion Gear Set For Dana 70 In A 4.11 Ratio (Part No.36089)

Replacement Ring & Pinion Gear Set For Dana 70 In A 4.11 Ratio

from

$379.99
USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

Product Features:
  • Fits Dana Spicer 70
  • 10.50″ ring gear diameter
  • 29 spline pinion
  • 12 ring gear bolts
  • 4.11 ratio
See More

Motive Gear – Differential Gear Install Kit (Part No.C9.25IK)

Differential Gear Install Kit

from

$28.99
Product Features:
  • MINI INSTALL KIT CHRYSLER 9.25 9 1/4″
See More

Yukon Gear – Steel Spool For Dana 60 With 30 Spline Axles, 4.56 & Up (Part No.32170)

Steel Spool For Dana 60 With 30 Spline Axles, 4.56 & Up

from

$506.99
Yukon Performance full spool for Dana 60 with 30 spline axles. fits 4.56 and up. Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications. Spools provide 100% power to both tires at all times and are a lower cost alternative to lockers. Spools are not recommended for street driven vehicles. Yukon Performance spools come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Chrysler Dana Spicer 60 with 30 spline axles
  • 4.56 and up ratio only
  • Provides 100% traction to both wheels at all times
  • Not recommended for street driven vehicles
See More

National – Bearings (Part No.382S)

Bearings

from

$18.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Driveworks – Oil Seal (Part No.S-9316)

Oil Seal

from

$3.99
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Yukon Gear – Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement (Part No.33249)

Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement

from

$8.99
Product Features:
  • Clutch guide for Chrysler 9.25″, Dana Spicer 44 and Dana Spicer 60
  • For Trac Loc positraction applications only
See More

Yukon Gear – Replacement Carrier Shim Kit For Dana 60, 70, 70HD, 70U & 80 (Part No.55011)

Replacement Carrier Shim Kit For Dana 60, 70, 70HD, 70U & 80

from

$13.99
Product Features:
  • Carrier shim kit for Dana Spicer 60, 70, 70HD, 70U and 80
See More

Yukon Gear – Differential (Part No.26040)

Differential

from

$939.99
Differential

Yukon Gear – Replacement Baffle For Dana 60 & Dana 70-U (Part No.33001)

Replacement Baffle For Dana 60 & Dana 70-U

from

$6.99
Product Features:
  • Oil baffle for Dana Spicer 60 and Dana Spicer 70U
See More

Powertrax – Grip PRO Traction System (Part No.GT436035)

Grip PRO Traction System

from

$596.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More

Yukon Gear – Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement (Part No.33164)

Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement

from

$3.99
Product Features:
  • Pinion nut washer for Chrysler 7.25″, 8.25″, 8.75″ with 29 spline pinion, Jeep JK rear, Dana Spicer 60, 70, 70U and 70HD and 2007-2010 Ford 10.5″
See More

Yukon Gear – Replacement Carrier Shim Kit For Dana 60, 61 & 70U (Part No.55020)

Replacement Carrier Shim Kit For Dana 60, 61 & 70U

from

$104.99
Product Features:
  • Carrier shims for Dana Spicer 60 and 70U
See More

Victor Reinz – Differential Cover Gasket (Part No.71-14868-00)

Differential Cover Gasket

from

$8.79
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Popular 1981 Dodge W350 Differentials Categories

1981 Dodge W350 Differentials

Maybe you’re in the middle of a full rebuild of that 1981 Dodge W350. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 329 different Differentials in our inventory ranging from $2.29 to $2,367.99. That means you can find the exact parts or products you need to keep that 1981 Dodge W350 running smoothly.

Differentials are only as good as their brand. We stock 14 different brands to make sure you have plenty of trusted parts to choose from for your 1981 Dodge W350. FELPRO, Yukon Gear, and Motive Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1981 Dodge W350, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 70 reviews in this category, some of the top rated parts include Differential Carrier Gear Kit with 3.7 stars and Bearings with 4.3 stars.

So if you’re in the market for aftermarket Differentials to keep your 1981 Dodge W350 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1981 Dodge W350 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1981 Dodge W350 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your W350 the best it can be. Be sure to browse some of our top Differentials brands and parts.

Top 1981 Dodge W350 Differentials from Felpro

Felpro products are another trusted brand when it comes to Differentials for your 1981 Dodge W350. Popular Felpro parts include:
Differential Cover Gasket
from $9.49
(34)
Differential Cover Gasket
Rear Differential Cover Gaskets
DIFFERENTIAL GASKET
from $8.29
(4)
DIFFERENTIAL GASKET
Rear Housing Cover Gaskets
Differential Cover Gasket
from $15.99
(1)
Differential Cover Gasket
Front Differential Cover Gaskets

FAQs for 1981 Dodge W350 Differentials

What are the most purchased Differentials for the 1981 Dodge W350?

Out of 329 Differentials for the 1981 Dodge W350, the most popular in our inventory are:
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil
Ring Gear Bolt
from $2.49
This product is not rated
Ring Gear Bolt
Differential Ring Gear Bolts
Oil Drain Plug Differential Plug Chrysler 2008-2000, Head Size
from $8.99
This product is not rated
Oil Drain Plug Differential Plug Chrysler 2008-2000, Head Size
Differential Cover Plugs

What are the top-rated 1981 Dodge W350 Differentials?

Top-rated Differentials for your 1981 Dodge W350 based on customer reviews/ratings are:
Differential Carrier Gear Kit
from $219.99
(6)
Differential Carrier Gear Kit
“Great customer service”
Bearings
from $22.99
(3)
Bearings
“works great !!!”
Cross Pin Shaft For Standard Open Chrysler 9.25"
from $46.99
(1)
Cross Pin Shaft For Standard Open Chrysler 9.25"
“Fits like the old one”