1981 Chevrolet Corvette Suspension Parts
Find Your Specific 1981 Chevrolet Corvette Suspension Parts
Below you will find various in-demand Chevrolet Suspension Parts, components and accessories for your 1981 Corvette. Advance Auto Parts has popular Corvette parts like Air Suspension and Kits, Trailing Arms, Control Arms and more. You’ll also find aftermarket and OEM Suspension Parts for other Corvette model years including
2011,
2012,
2013,
2014,
2015,
2016,
2017,
2018,
2019 and more. Select a category of 1981 Chevrolet Corvette Suspension Parts below and start saving instantly.
Popular 1981 Chevrolet Corvette Suspension Parts Categories
Essential Suspension Parts for 1981 Chevrolet Corvettes
KYB – High Pressure Monotube Gas Shock (Part No.KG5571)
from
$49.49
The Gas-a-just monotube shock absorber is available as an OE monotube replacement to restore your vehicles original capabilities. The KYB Gas-a-just has two separate working chambers: An air-free hydraulic piston and valve area for responsiveness and con
Product Features:
See More
Product Features:
- The Correct, Monotube-Designed Orem Replacement
- The KYB Gas-A-Just Helps Restore The Designed Control And Handling Of The Corvette
- High Pressure Monotube Design Separates The Gas And Oil For Fade Free Operation And Instant Response
- Fluid Leaking Can Be A Cause Of Shock Failure, The KYB Gas-A-Just Has An Ultra-Smooth Triple Chrome Plated Chrome Piston Rod To Reduce Seal Wear
- The Higher Gas Pressure Of The KYB Gas-A-Just Responds Quickly To Improve Steering Response
- Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Gas-A-Just Helps Keep Electronic Safety Systems Performing As Designed.
- Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Gas-A-Just Helps Keep Electronic Safety Systems Performing As Designed.
MOOG – Coil Spring Set (Part No.639)
from
$116.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
Valvoline – Extended Protection Automatic Transmission Fluid, 1 Quart (Part No.899179)
from
$14.99
Modern transmissions are better than ever, with more gears to help improve fuel efficiency and acceleration. Greater performance calls for greater protection. Valvoline Extended Protection Full Synthetic ATF features our exclusive Dual Defense Additive Technology for two layers of protection against metal-on-metal contact and thermal breakdown, all while minimizing wear on clutch components. In fact, Valvoline Extended Protection Full Synthetic ATF is 45% stronger against breakdown compared to major brand DEX/MERC oxidative PDSC performance. Proven to maximize transmission life, our patented formula is suitable for use in 92% of vehicles in light duty automatic transmissions 2010 and newer. Keep your modern vehicle shifting smoothly, mile after mile, with the ultimate protection you can only expect from Valvoline, the #1 ATF brand.
Product Features:
See More
Product Features:
- The ultimate protection for your automatic transmission
- 45% stronger against breakdown
- Dual Defense Additive Technology combines friction modifiers and anti-wear additives for two layers of protection
- Suitable for use in over 92% of vehicles in light duty automatic transmissions 2010 and newer
Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon (Part No.773775)
from
$36.49
Valvoline MaxLife Multi-Vehicle Automatic Transmission Fluid (ATF) is a full-synthetic formulation with advanced additives to prevent the major causes of transmission breakdown and help extend transmission life. Developed to help prevent leaks, maximize transmission performance, reduce transmission wear, and maintain smooth shifting longer than conventional fluids. It is suitable for use in a broad range of ATF applications including most Ford, GM, Toyota, Honda, Nissan, Hyundai, BMW, Mercedes, Volvo, VW & Audi.
Product Features:
See More
Product Features:
- Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
- Long life friction modifiers help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
- High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
- Developed with anti-wear technology to help improve transmission durability
- Advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
- Suitable for 95% of traditional ATFs including Dex/Merc, Mercon LV & Mercon V
Monroe – Monroe Shock Absorber Air Hose Kit (Part No.AK64)
from
$25.99
Monroe® is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe® shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.
See More
Monroe – Monroe Shock Absorber Air Hose Kit (Part No.AK18)
from
$36.49
Monroe® is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe® shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.
See More
Monroe – OESpectrum Passenger Car Shock Absorber (Part No.5892)
from
$51.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
Product Features:
See More
Product Features:
- REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
- EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
- CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
- 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
KYB – High Pressure Monotube Gas Shock (Part No.KG5569)
from
$52.99
The Gas-a-just monotube shock absorber is available as an OE monotube replacement to restore your vehicles original capabilities. The KYB Gas-a-just has two separate working chambers: An air-free hydraulic piston and valve area for responsiveness and con
Product Features:
See More
Product Features:
- The Correct, Monotube-Designed Orem Replacement
- The KYB Gas-A-Just Helps Restore The Designed Control And Handling Of The Corvette
- Gas-A-Just Monotubes Are Designed For Vehicles That Work, Tow, And Have Larger, Heavier Tires & Wheels
- High Pressure Monotube Design Separates The Gas And Oil For Fade Free Operation And Instant Response
- Fluid Leaking Can Be A Cause Of Shock Failure, The KYB Gas-A-Just Has An Ultra-Smooth Triple Chrome Plated Chrome Piston Rod To Reduce Seal Wear
- The Higher Gas Pressure Of The KYB Gas-A-Just Responds Quickly To Improve Steering Response
- Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Gas-A-Just Helps Keep Electronic Safety Systems Performing As Designed.
Metro Mould – Torque Arm Bushing (Part No.XB 20)
from
$6.49
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Front Suspension Bumper. For steering knuckle support. 1-3/8 In. high. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense material to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Dorman – Suspension Control Arm Bumper (Part No.533-615)
from
$6.99
This suspension control arm bumper is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Monroe – Max-Air Air Adjustable Air Shock Absorber Pack of 2 (Part No.MA805)
from
$101.99
Ideal for hauling, Monroe Max-Air shock absorbers can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (Capacity is limited by vehicle suspension, tires and transmission. See vehicle owner’s manual.)
Product Features:
See More
Product Features:
- MAINTAIN RIDE HEIGHT UNDER LOAD — Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission; see owner’s manual)
- EASY TO ADJUST — Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor; pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
- EXCEPTIONAL HANDLING — Full-displaced valving on compression and extension cycles for a smooth ride
- BUILT TO LAST — Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
- CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
- Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
- Special Air Fitting: Resists air leakage.
Monroe – Max-Air Air Shock Absorber (Part No.MA785)
from
$129.99
Ideal for hauling, Monroe® Max-Air® shock absorbers can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by vehicle suspension, tires and transmission. See vehicle owner’s manual.)
Product Features:
See More
Product Features:
- MAINTAIN RIDE HEIGHT UNDER LOAD — Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission, see owner’s manual)
- EASY TO ADJUST — Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor, pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
- EXCEPTIONAL HANDLING — Full-displaced valving on compression and extension cycles for a smooth ride
- BUILT TO LAST — Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
- CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
- Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
- Special Air Fitting: Resists air leakage.
Energy Suspension – Hyper-Flex System (Part No.3.18122R)
from
$346.99
Product Features:
See More
- Incredible Improvement in Control
- Maintains Proper Caster and Camber Alignment
- Increase in Handling and Control
- Greatly Reduce Wheel Hop on Quick Acceleration
- Even Braking Control is Improved
- Better Suspension Stability
Energy Suspension – Hyper-Flex System (Part No.3.18123R)
from
$373.99
Product Features:
See More
- Incredible Improvement in Control
- Maintains Proper Caster and Camber Alignment
- Increase in Handling and Control
- Greatly Reduce Wheel Hop on Quick Acceleration
- Even Braking Control is Improved
- Better Suspension Stability
Energy Suspension – Trailing Arm Bushing Set (Part No.3.3191R)
from
$42.99
Product Features:
See More
- Help Maintain Proper Rear Toe and Caster
- During High Performance Driving Conditions
- Important When Using Larger Wheels/Tires
Energy Suspension – Trailing Arm Bushing Set (Part No.3.3191G)
from
$42.99
Product Features:
See More
- Help Maintain Proper Rear Toe and Caster
- During High Performance Driving Conditions
- Important When Using Larger Wheels/Tires
MOOG – Coil Spring Set (Part No.5758)
from
$98.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
Rare Parts – Control Arm Shaft Kit (Part No.RP15354)
from
$125.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Improves steering response
- Complete kit for 1 arm
- Heat treated steel bushings OR torsional rubber bushings
- Reduces vibration
Dorman – Suspension Control Arm Bushing (Part No.533-421)
from
$12.99
This suspension control arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment bushing on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Dorman – Suspension Control Arm Bushing Kit (Part No.533-407)
from
$32.99
This suspension control arm bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Rare Parts – Spring Link Kits (Part No.RP18811)
from
$85.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
See More
Rare Parts – Spring Bolt Kit (Part No.RP35594)
from
$166.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Grade 5 or higher bolt/pin
- No Squeak
- Reduces vibration
Energy Suspension – Leaf Spring Bushing Set (Part No.3.2140R)
from
$17.99
Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.
Product Features:
See More
Product Features:
- Made of Superior Hyper-Flex+ Material
- Adds Dramatic Amount of Performance/Durability
- Helps Vehicle Be in Control
- Allows the Suspension to Function Properly
Energy Suspension – Leaf Spring Bushing Set (Part No.3.2104R)
from
$18.99
Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.
Product Features:
See More
Product Features:
- Made of Superior Hyper-Flex+ Material
- Adds Dramatic Amount of Performance/Durability
- Helps Vehicle Be in Control
- Allows the Suspension to Function Properly
Energy Suspension – Leaf Spring Bushing Set (Part No.3.2121G)
from
$35.99
Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.
Product Features:
See More
Product Features:
- Made of Superior Hyper-Flex+ Material
- Adds Dramatic Amount of Performance/Durability
- Helps Vehicle Be in Control
- Allows the Suspension to Function Properly
Metro Mould – Coil Spring Insulator (Part No.BN 110)
from
$43.49
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Front Coil Spring Insulator. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Upgrade your 1981 Chevrolet Corvette with Top-Quality Suspension Parts
When it comes to maintaining or upgrading your 1981 Chevrolet Corvette, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Suspension Parts are key to keeping your Corvette functioning at its best. At Advance Auto Parts, we offer a wide selection of 29 Suspension Parts for the 1981 Chevrolet Corvette, designed to meet your needs without breaking the bank.
From
Air Suspension and Kit
replacements to
Trailing Arms
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Suspension Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Suspension Parts for your 1981 Chevrolet Corvette at great prices.
Our Suspension Parts inventory for this model
ranges from just $10.49 to $373.99, with
an average price of $64.81.
Our 29 Suspension Parts in stock come from 9 trusted brands, so you’re sure to find the right part for your 1981 Chevrolet Corvette without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1981 Chevrolet Corvette, we stock popular OEM and aftermarket Suspension Parts from top names
like Valvoline, Monroe, Moog, and more.
Valvoline Suspension Parts
start at just $36.49 and boast an impressive 5 stars average rating from customers.
Monroe and Moog also bring quality to the table, with Suspension Parts available starting at $23.99, and at an average 4 stars rating.
With 476 customer reviews and counting, our 1981 Chevrolet Corvette Suspension Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Suspension Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1981 Chevrolet Corvette is always ready to roll. We’re committed to providing you with everything you need to keep your Corvette in top shape, all in one place.
Start shopping confidently below for your 1981 Chevrolet Corvette!
Best-Selling Air Suspension and Kits for 1981 Chevrolet Corvettes
Enhance the driving experience in your Chevrolet with 5 quality Air Suspension and Kit components, starting at $25.99.
Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon (Part No.773775)
from
$36.49
Valvoline MaxLife Multi-Vehicle Automatic Transmission Fluid (ATF) is a full-synthetic formulation with advanced additives to prevent the major causes of transmission breakdown and help extend transmission life. Developed to help prevent leaks, maximize transmission performance, reduce transmission wear, and maintain smooth shifting longer than conventional fluids. It is suitable for use in a broad range of ATF applications including most Ford, GM, Toyota, Honda, Nissan, Hyundai, BMW, Mercedes, Volvo, VW & Audi.
Product Features:
See More
Product Features:
- Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
- Long life friction modifiers help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
- High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
- Developed with anti-wear technology to help improve transmission durability
- Advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
- Suitable for 95% of traditional ATFs including Dex/Merc, Mercon LV & Mercon V
Monroe – Max-Air Air Shock Absorber (Part No.MA785)
from
$129.99
Ideal for hauling, Monroe® Max-Air® shock absorbers can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by vehicle suspension, tires and transmission. See vehicle owner’s manual.)
Product Features:
See More
Product Features:
- MAINTAIN RIDE HEIGHT UNDER LOAD — Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission, see owner’s manual)
- EASY TO ADJUST — Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor, pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
- EXCEPTIONAL HANDLING — Full-displaced valving on compression and extension cycles for a smooth ride
- BUILT TO LAST — Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
- CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
- Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
- Special Air Fitting: Resists air leakage.
Monroe – Monroe Shock Absorber Air Hose Kit (Part No.AK18)
from
$36.49
Monroe® is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe® shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.
See More
Monroe – Monroe Shock Absorber Air Hose Kit (Part No.AK64)
from
$25.99
Monroe® is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe® shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.
See More
Energy Suspension – Hyper-Flex System (Part No.3.18123R)
from
$373.99
Product Features:
See More
- Incredible Improvement in Control
- Maintains Proper Caster and Camber Alignment
- Increase in Handling and Control
- Greatly Reduce Wheel Hop on Quick Acceleration
- Even Braking Control is Improved
- Better Suspension Stability
Most Popular 1981 Chevrolet Corvette Trailing Arms
Customize your Chevrolet with 2 Trailing Arms products
like Trailing Arm Bushings, all
priced under $42.99.
Energy Suspension – Trailing Arm Bushing Set (Part No.3.3191G)
from
$42.99
Product Features:
See More
- Help Maintain Proper Rear Toe and Caster
- During High Performance Driving Conditions
- Important When Using Larger Wheels/Tires
Energy Suspension – Trailing Arm Bushing Set (Part No.3.3191R)
from
$42.99
Product Features:
See More
- Help Maintain Proper Rear Toe and Caster
- During High Performance Driving Conditions
- Important When Using Larger Wheels/Tires
Top Picks for 1981 Chevrolet Corvette Control Arms
Upgrade Chevrolet Corvettes with top-quality Control Arms parts, including 13 OEM and aftermarket selections for your 1981 model.
Driveworks – Control Arm Bushing (Part No.DW-K5196B)
from
$12.79
Control Arm Bushing
MOOG – Control Arm Bushing Kit (Part No.K5196)
from
$23.99
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
- OE-STYLE DESIGN — Engineered to match or exceed OE requirements
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Metal rib design helps lock the inner tube within frame pocket
- Metal surfaces are phosphate coated for corrosion protection
MOOG – Control Arm Bushing Kit (Part No.K304)
from
$37.49
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
- OE-STYLE DESIGN — Engineered to match or exceed OE requirements
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Metal rib design helps lock the inner tube within frame pocket
- Metal surfaces are phosphate coated for corrosion protection
Energy Suspension – Control Arm Bushing Set (Part No.3.3108R)
from
$102.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Driveworks – CONTROL ARM BUSHING (Part No.DW-K304B)
from
$13.49
CONTROL ARM BUSHING
Rare Parts – Control Arm Shaft Kit (Part No.RP15354)
from
$125.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Improves steering response
- Complete kit for 1 arm
- Heat treated steel bushings OR torsional rubber bushings
- Reduces vibration
MOOG – Control Arm Bushing (Part No.K200921)
from
$67.99
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
- OE-STYLE DESIGN — Engineered to match or exceed OE requirements
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Rare Parts – Control Arm Bush (Part No.RP15801)
from
$44.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Reduces vibration
- Torsional rubber bushings
- UV resistant
- No Squeak
Dorman – Suspension Control Arm Bushing Kit (Part No.533-407)
from
$32.99
This suspension control arm bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Rare Parts – Control Arm Bushing (Part No.RP15118)
from
$31.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Reduces vibration
- Torsional rubber bushings
- UV resistant
- No Squeak
Dorman – Suspension Control Arm Bushing (Part No.533-421)
from
$12.99
This suspension control arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment bushing on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Rare Parts – Control Arm Bush (Part No.RP15064)
from
$11.29
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Reduces vibration
- Torsional rubber bushings
- UV resistant
- No Squeak
Metro Mould – Torque Arm Bushing (Part No.XB 100)
from
$10.49
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Lower A-Arm Bumper. 3-7/8 In. long, 1-7/8 In. high. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense material to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
In-Demand Coil and Leaf Springs for 1981 Chevrolet Corvettes
Select from 5 premium Coil and Leaf Springs parts for your 1981 Chevrolet Corvette, with prices ranging from $18.99 to $98.99.
Energy Suspension – Leaf Spring Bushing Set (Part No.3.2104R)
from
$18.99
Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.
Product Features:
See More
Product Features:
- Made of Superior Hyper-Flex+ Material
- Adds Dramatic Amount of Performance/Durability
- Helps Vehicle Be in Control
- Allows the Suspension to Function Properly
Metro Mould – Coil Spring Insulator (Part No.BN 110)
from
$43.49
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Front Coil Spring Insulator. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
MOOG – Coil Spring Set (Part No.5758)
from
$98.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
MOOG – Coil Spring Set (Part No.5762)
from
$96.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
Rare Parts – Spring Link Kits (Part No.RP18811)
from
$85.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
See More
Most Sold 1981 Chevrolet Corvette Shocks and Struts
Explore our best-selling Chevrolet parts for the 1981 Corvette among 4 OEM and aftermarket options starting from $52.99.
Monroe – OESpectrum Passenger Car Shock Absorber (Part No.5906)
from
$59.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
Product Features:
See More
Product Features:
- REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
- EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
- CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
- 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Monroe – OESpectrum Passenger Car Shock Absorber (Part No.5850)
from
$52.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
Product Features:
See More
Product Features:
- REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
- EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
- CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
- 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Lakewood – Drag Shock-70/30:Ford/GM/Mopar (Part No.40121)
from
$104.99
The best all-round choice for vehicles with leaf or coil springs. Properly loads rear wheels to prevent over-reaction and wheel hop.
Product Features:
See More
Product Features:
- Excellent Weight Transfer
- Lets Front End Down Quickly
- Maximum Traction
- Makes Vehicle Safer
- Easier Control At End Of Track
- Better Overall Stability
Lakewood – Drag Shock-90/10:Ford/GM/Mopar (Part No.40101)
from
$99.19
Drag Shock-90/10:Ford/GM/Mopar
Top-Rated Suspension Parts Brands For Your 1981 Chevrolet Corvette
Shop for the best-rated brands offering Suspension Parts and other products for your 1981 Chevrolet Corvettes. Below you’ll find some of our best rated Suspension Parts from Valvoline, Monroe, and Moog, and more. Suspension Parts from these brands that fit a 1981 Corvette start at just $23.99 and are rated as high as 5 stars. OEM and aftermarket Suspension Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular Valvoline 1981 Chevrolet Corvette Suspension Parts
When it comes to maintaining or upgrading your 1981 Chevrolet Corvette, using quality Suspension Parts is essential to ensure durability and a perfect fit. Valvoline ticks all of those boxes. We offer a wide selection of Valvoline Suspension Parts, specifically designed for the 1981 Chevrolet Corvette. With over 1 Valvoline brand Suspension Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $36.49. Plus, with over 446 customer reviews and an average rating of 5 stars, you can trust that our Valvoline Suspension Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$36.49
$36.49
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon
“Good product”
Popular Monroe 1981 Chevrolet Corvette Suspension Parts
Monroe auto parts is one of the highest quality Suspension Part brands in the market. Any 1981 Chevrolet Corvette owner should feel confident when installing genuine Monroe parts in their vehicle. To ensure the best fit and performance for your 1981 Corvette, Advance Auto Parts carries a full inventory of 5 Monroe Suspension Parts. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Monroe Suspension Parts range from $25.99 to $129.99, plus, with more than 24 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Suspension Parts below will deliver on both quality and value.
FAQs for 1981 Chevrolet Corvette Suspension Parts
Which Suspension Parts are best-sellers for 1981 Chevrolet Corvettes?
Out of 29 Suspension Parts that fit 1981 Chevrolet Corvettes, the following parts are the top sellers:
- OESpectrum Passenger Car Shock Absorber (19710443) – $59.99
- Monroe Shock Absorber Air Hose Kit (5100001) – $36.49
- OESpectrum Passenger Car Shock Absorber (19710429) – $52.99
What’s the price range for 1981 Chevrolet Corvette Suspension Parts?
Suspension Part prices for the 1981 Chevrolet Corvette start at $10.49 and go up to $373.99 for the most premium parts.
What’s the average price of a Suspension Part for a 1981 Chevrolet Corvette?
The average price for Suspension Parts for the 1981 Chevrolet Corvette is $64.81. Keep in mind the variety of part types within our Suspension Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Suspension Parts for other Chevrolet Corvette model years?
What are the cheapest Suspension Parts for my 1981 Chevrolet Corvette?
The cheapest 1981 Chevrolet Corvette Suspension Parts we carry in stock are:
- Torque Arm Bushing (10443206) – $10.49
- Control Arm Bush (12245256) – $11.29
- Control Arm Bushing (10577282) – $12.79
- Suspension Control Arm Bushing (50211972) – $12.99
- CONTROL ARM BUSHING (10577261) – $13.49
What are the top-rated Suspension Parts that fit the 1981 Chevrolet Corvette?
Out of 476 reviews by customers, our 1981 Chevrolet Corvette Suspension Parts have an average customer rating of . These are some of the highest-rated Suspension Part types for the 1981 Chevrolet Corvette and their top-rated products:
- Control Arms
- Control Arm Bushing (10577282) – $12.79
- Control Arm Bushing Kit (20973475) – $23.99
- Shocks and Struts
- Control Arm Bushing (10577282) – $12.79
- Control Arm Bushing Kit (20973475) – $23.99
What types of Suspension Parts do you sell for my 1981 Chevrolet Corvette?
As of 2/5/25, these are some of the most in-demand types of Suspension Parts for a 1981 Chevrolet Corvette:
Can I get help with 1981 Chevrolet Corvette Suspension Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Suspension Parts and more.
What is your return policy for Chevrolet Corvette Suspension Parts?
Advance Auto Parts keeps returns simple. For new Chevrolet Corvette Suspension Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
