1981 Chevrolet Corvette Drive Shafts and Axles
More 1981 Chevrolet Corvette Drive Shafts and Axles
Find your specific 1981 Chevrolet Corvette original or aftermarket Drive Shafts and Axles below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1981 Chevrolet Corvette Drive Shafts and Axles
Yukon Gear – Stub Axle Bearing For Dana 44 Ica Rear (Part No.18051)
Yukon Gear – Side Bearing For Cast Iron Corvette, Dana 36 & Dana 28 (Part No.18058)
from
$25.99
Product Features:
See More
- Side axle bearing
- Fits 1963-1979 Corvette, Dana Spicer 28 and 36
Yukon Gear – Yoke For 12P, 12T, And ’63 To ’74 GM CI ‘Vette With A 1310 U/Joint Size (Part No.41167)
from
$276.99
Yukon yoke for 12P, 12T, and ’63 to ’74 GM CI ‘Vette with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects. This yoke does not come with straps or bolts.
Product Features:
See More
Product Features:
- Fits GM 12 bolt passenger car and truck and 1963-1974 Corvette
- 30 spline
- 1310 u-joint size
- 3.219″ snap ring span
- 1.062″ cap diameter
- Outside snap ring design
- U-bolt style
Yukon Gear – Replacement Yoke For Dana 44-HD, 60, And 70 With A 1310 U/Joint Size (Part No.41022)
from
$233.99
Yukon replacement yoke for Dana 44-HD, 60, and 70 with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60 and 70
- 29 spline
- 1310 u-joint size
- Outside snap ring design
- 3.219″ snap ring span
- 1.062″ cap diameter
- Strap style
Motive Gear – Drive Shaft Pinion Yoke (Part No.MG1310-6010)
National – Bearings (Part No.HM88649)
from
$21.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.307-L)
from
$37.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – The Carrier Bearing Puller (Part No.56072)
from
$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
National – Bearings (Part No.A-5)
from
$16.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Rear Shaft Bearing For C5 & C6 Corvette (Part No.18056)
National – Bearings (Part No.BH-2212)
from
$27.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Available in both caged design and full complement
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Universal Joint (Part No.DW-331BL)
from
$15.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).
Product Features:
See More
Product Features:
- The cross is hot forged for the higher torque and horsepower
- The bearing cups are made by cold forging, having higher strength and better rigidity
- Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
- Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
- Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
- Snap rings are held to strict tolerances to ensure proper cup position and retention
- Nitrile rubber seals to optimize grease retention and reduce contamination
Spicer – SPICER U-JOINT (Part No.5-1310-1X)
from
$44.99
SPICER U-JOINT
Spicer – Universal Joint (Part No.5-1350X)
from
$44.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More
Spicer – Universal Joint (Part No.5-178X)
from
$42.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More
Spicer – Universal Joint (Part No.5-1310X)
from
$35.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More
Yukon Gear – Replacement Redi-Sleeve Yoke Saver For Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 (Part No.30222)
from
$182.99
Replacement redi-sleeve yoke saver for Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 .Yukon Mighty seal.
Product Features:
See More
Product Features:
- Pinion Redi-sleeve
- Fits Dana Spicer 25, 27, 30, 4 and 50
Popular 1981 Chevrolet Corvette Drive Shafts and Axles Categories
1981 Chevrolet Corvette Drive Shafts and Axles
Maybe you’re in the middle of a full rebuild of that 1981 Chevrolet Corvette. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 11 different Drive Shafts and Axles in our inventory ranging from $15.99 to $883.99. That means you can find the exact parts or products you need to keep that 1981 Chevrolet Corvette running smoothly.
Drive Shafts and Axles are only as good as their brand. We stock 5 different brands to make sure you have plenty of trusted parts to choose from for your 1981 Chevrolet Corvette. National, Spicer, and Motive Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Drive Shafts and Axles for your 1981 Chevrolet Corvette, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 1981 Chevrolet Corvette rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Drive Shafts and Axles Brands To Make Your 1981 Chevrolet Corvette Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1981 Chevrolet Corvette demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your Corvette the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.
Popular Driveworks Drive Shafts and Axles
We carry Driveworks parts in our stock across Axle Shaft Universal Joints categories, plus more. For a 1981 Chevrolet Corvette, our most popular Driveworks Drive Shafts and Axles include:
Top 1981 Chevrolet Corvette Drive Shafts and Axles from National
National products are another trusted brand when it comes to Drive Shafts and Axles for your 1981 Chevrolet Corvette. Popular National parts include:
FAQs for 1981 Chevrolet Corvette Drive Shafts and Axles
What are the most purchased Drive Shafts and Axles for the 1981 Chevrolet Corvette?
Out of 11 Drive Shafts and Axles for the 1981 Chevrolet Corvette, the most popular in our inventory are:
