1981 Buick Skylark Engine Mounts

A true performance application component for cars, trucks, hot rods and racing/competition vehicles – yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.

Product Features:

• Gains Both Performance and Longevity
• Will Handle Any and All Torque
• Out Lasts Rubber

Anchor 2477 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 1982-1994
• Weight approx: 2 Lbs

Anchor 2384, This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 1975-1987
• Weight approx: 3 Lbs

Anchor 2281 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 1968-1981
• Weight approx: 3 Lbs
• Part Group: 2281, 2281

Anchor 2292 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 1968-2005
• Weight approx: 3 Lbs
• Product: Made In The Usa
• Design: Clamshell
• Part Group: 2292, 2292

Anchor 2382 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 1977-1987
• Weight approx: 3 Lbs

Anchor 2952 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 1987-1991
• Weight approx: 3 Lbs
• Part Group: 2859, 2952

Anchor 2803, This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 1992-2002
• Weight approx: 3 Lbs
• Hydraulic
• Insert Only

Product Features:

• Re-Engineered to Handle High Horsepower
• Outlasts Rubber
• Virtually Indestructible

Anchor 2291 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 1967-1976
• Weight approx: 4 Lbs
• Part Group: 2291, 2291
• Product: Made In The Usa

Product Features:

• Can be used for a variety of GM vehicle applications and LS/LT swaps that utilize the common 2292 aftermarket mounts
• Heavy duty 11-gauge steel construction is over 50% thicker than common aftermarket mounts
• Dowels allow halves to be easily aligned
• No need to drill rivets from existing shell
• Durable powder coated finish
• For use with Hooker BlackHeart Polyurethane Inserts – P/N’s 71221014HKR (Black) or 71221015HKR (Red) – Sold Separately
• Sold individually (Consisting of one upper and one lower plate, Two required per vehicle)

Anchor 2548 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 1985-1996
• Weight approx: 5 Lbs
• Hydraulic

Anchor 2383 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 1975-1978
• Weight approx: 3 Lbs

Product Features:

• Can be used for aftermarket poly mounts or OEM rubber (Rubber Mounts are for GM 4th Gen F-Body)
• Class 10.9 for strength
• Zinc plated for corrosion resistance
• Includes 2 flange head bolts and 2 flange nuts

Anchor 2505 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 1980-1981
• Weight approx: 3 Lbs

Product Features:

• Fabricated steel construction- provides a strong and rigid engine mounting foundation
• Designed for use with the Holley 302-2 oil pan to provide optimized inner tie rod clearances and U-joint working angles
• Brackets maintain the engine/transmission mating plane in the stock SB Chevy location to ease installation when using a GM legacy automatic transmission (TH350, TH400)
• Compatible with stock Saginaw or Delphi 600 series power steering boxes (depending on particular accessory drive system used)
• Provides ability to use low-mount A/C compressors in most instances
• Zinc plated finish- provides corrosion protection
• Brackets are bolt-in compatible with Hooker exhaust manifolds, headers, transmission crossmember and exhaust systems for this vehicle application
• LS Oil Pan 302-2 can be used with these mounts

Anchor 2219 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 1959-1968
• Weight approx: 2 Lbs
• Part Group: 2219, 2219

Anchor 2626 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 1985-1991
• Weight approx: 3 Lbs

A true performance application component for cars, trucks, hot rods and racing/competition vehicles – yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.

Product Features:

• Gains Both Performance and Longevity
• Will Handle Any and All Torque
• Out Lasts Rubber

Anchor 2610 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 1985-1994
• Weight approx: 3 Lbs

Anchor 2387, This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 1975-1990
• Weight approx: 3 Lbs
• Design: Clamshell
• Part Group: 2387, 2387

Anchor 2328 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 1965-1990
• Weight approx: 2 Lbs
• Part Group: 2328, 2328
• Product: Made In The Usa