1981 Buick Century Valve Cover and Cylinder Heads

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

• Unsurpassed quality that you can trust
• Uses leading edge materials
• State-of-the-art manufacturing
• Exacting tolerances
• Meets or exceeds OEM specifications

Pro Magnum Hydraulic Flat Lifter for Oldsmobile 260-455 and Pontiac 326-455.

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

High Performance head bolts are available with a reduced wrenching hex or 12 point and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head retorquing. All High Performance Series bolts are 180,000 PSI (which is 15 Percent stronger than Grade 8) and kits come complete with hardened parallel ground washers.

Product Features:

• High Performance Head Bolts Are Available With A Reduced Wrenching Hex Or 12 Point
• Wide Area Flanged Head That Eliminates The Need For Valve Train Removal To Facilitate Cylinder Head Retorquing
• Rated At 180,000 PSI Tensile Strength
• High Performance Head Bolts Are Stronger

All Pro Series bolts are cold forged to ensure molecular integrity, heat treated prior to thread rolling and machining, and are rated at 200,000 PSI tensile strength. ARP Pro Series head bolt kits are application specific, designed for use with typically competition only components. These fasteners deliver superior strength and meet the ARP zero defect zero failure quality standard. Hardened and parallel ground washers are included with each kit to ensure even load distribution and accurate torque readings. All Pro Series head bolts have a reduced wrenching hex or 12 point head and wide area flange to eliminate the need for valve train removal for cylinder head retorquing and permits the use of larger diameter valve springs. Most applications have undercut short bolts that can help eliminate head gasket failures through providing more stretch to compensate for the additional compression of gaskets.

Product Features:

• Pro Series Bolts Are Cold Forged To Ensure Molecular Integrity, Heat Treated Prior To Thread Rolling And Machining
• Nominally Rated At 200,000 Psi Tensile Strength
• These Fasteners Deliver Superior Strength And Meet The ARP Zero Defect Zero Failure Quality Standard
• Bolts Have A Reduced Wrenching Hex Or 12 Point Head And Wide Area Flange To Eliminate The Need For Valve Train Removal For Cylinder Head Retorquing And Permits The Use Of Larger Diameter Valve Springs

High Performance head bolts are available with a reduced wrenching hex or 12 point and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head retorquing. All High Performance Series bolts are 180,000 PSI (which is 15 Percent stronger than Grade 8) and kits come complete with hardened parallel ground washers.

Product Features:

• High Performance Head Bolts Are Available With A Reduced Wrenching Hex Or 12 Point
• Wide Area Flanged Head That Eliminates The Need For Valve Train Removal To Facilitate Cylinder Head Retorquing
• Rated At 180,000 Psi Tensile Strength
• High Performance Head Bolts Are Stronger

The Edelbrock #4486 Signature Series Valve Covers are designed for Buick 3.8L & 4.1L V6 ’77 & later applications. Engineered for function and styled for great looks, Signature Series valve covers have stock-style breather baffles that prevent oil passage to the PCV valve. These quality valve covers accept all emissions equipment, including PCV valve holes. Rubber grommets for the breather and PCV valve holes are included. Matching breathers sold separately.

Product Features:

• Buick 3.8L & 4.1L V6 1977 & Later
• Short
• Chrome Steel
• Set Of Two
• Rubber Grommets For Breather

Holley is pleased to introduce their Muscle Series Small Block Chevy valve covers inspired by 1970’s era GM factory L82/LT1/Z28 equipped engines. These valve covers are a continuation of Holley’s Vintage Series valve cover line featuring a classic finned design and retro styling cues. Each set consists of one valve cover with a twist-in oil fill knockout (oil fill cap included) and one with a recessed area to place an adhesive backed Holley emblem (also included) or any round emblem of your choice.

Product Features:

• Designed to fit all 1958-86 Small Block Chevy engines with perimeter bolt patterns
• Die-Cast aluminum construction ensures high detail and reduces the opportunity for warping of the valve cover flange and oil leaks
• Standard height valve cover with pre-installed internal oil baffles
• Factory style twist-in oil fill cap, round Holley emblem, and square oil fill and PCV grommets included
• Available in four finishes to best suit your custom build: natural, polished, gloss black, factory orange

Holley is pleased to introduce their Muscle Series Small Block Chevy valve covers inspired by 1970’s era GM factory L82/LT1/Z28 equipped engines. These valve covers are a continuation of Holley’s Vintage Series valve cover line featuring a classic finned design and retro styling cues. Each set consists of one valve cover with a twist-in oil fill knockout (oil fill cap included) and one with a recessed area to place an adhesive backed Holley emblem (also included) or any round emblem of your choice.

Product Features:

• Designed to fit all 1958-86 Small Block Chevy engines with perimeter bolt patterns
• Die-Cast aluminum construction ensures high detail and reduces the opportunity for warping of the valve cover flange and oil leaks
• Standard height valve cover with pre-installed internal oil baffles
• Factory style twist-in oil fill cap, round Holley emblem, and square oil fill and PCV grommets included
• Available in four finishes to best suit your custom build: natural, polished, gloss black, factory orange

Holley is pleased to introduce their Muscle Series Small Block Chevy valve covers inspired by 1970’s era GM factory L82/LT1/Z28 equipped engines. These valve covers are a continuation of Holley’s Vintage Series valve cover line featuring a classic finned design and retro styling cues. Each set consists of one valve cover with a twist-in oil fill knockout (oil fill cap included) and one with a recessed area to place an adhesive backed Holley emblem (also included) or any round emblem of your choice.

Product Features:

• Designed to fit all 1958-86 Small Block Chevy engines with perimeter bolt patterns
• Die-Cast aluminum construction ensures high detail and reduces the opportunity for warping of the valve cover flange and oil leaks
• Standard height valve cover with pre-installed internal oil baffles
• Factory style twist-in oil fill cap, round Holley emblem, and square oil fill and PCV grommets included
• Available in four finishes to best suit your custom build: natural, polished, gloss black, factory orange

Holley is pleased to introduce their Muscle Series Small Block Chevy valve covers inspired by 1970’s era GM factory L82/LT1/Z28 equipped engines. These valve covers are a continuation of Holley’s Vintage Series valve cover line featuring a classic finned design and retro styling cues. Each set consists of one valve cover with a twist-in oil fill knockout (oil fill cap included) and one with a recessed area to place an adhesive backed Holley emblem (also included) or any round emblem of your choice.

Product Features:

• Designed to fit all 1958-86 Small Block Chevy engines with perimeter bolt patterns
• Die-Cast aluminum construction ensures high detail and reduces the opportunity for warping of the valve cover flange and oil leaks
• Standard height valve cover with pre-installed internal oil baffles
• Factory style twist-in oil fill cap, round Holley emblem, and square oil fill and PCV grommets included
• Available in four finishes to best suit your custom build: natural, polished, gloss black, factory orange

Other historic literature stated that you could expect reduced valve train noise from these cast M/T covers. Get a set today and get back your hot rodding groove!

Product Features:

• Precision manufactured with knock-out plugs for stock PCV (smog Control) and oil fill installations
• Top cover surface may be used for engraving your name horizontally
• Deep heat dissipating fins
• Cast aluminum construction for even gasket sealing
• Polished aluminum

The Vintage Series family of die-cast aluminum engine dress up accessories features a classically inspired finned design, high definition retro branding, and are offered in an array of finishes to best suite your custom build.

Product Features:

• Features a high definition “Chevrolet” script logo and a wrap-around finned design to add classic muscle styling to your engine bay
• Designed to fit all 1958-86 Small Block Chevy engines with perimeter bolt pattern
• Die-cast aluminum construction ensures high quality details, and reduces opportunities for valve cover flange warping and oil leaks
• 3.3″ tall with a solid body for non-emissions applications or custom crankcase ventilation setups
• Offered in natural cast, polished, satin black with machined fins, and factory orange with machined fins

Flashback – 1972: Nothing was cooler than sporting around town in a hot rod with a Holley Double Pumper and M/T finned aluminum valve covers! Show everyone how cool you are and show up sporting those same parts today!

Product Features:

• Precision manufactured with knock-out plugs for stock PCV (smog Control) and oil fill installations
• Top cover surface may be used for engraving your name horizontally
• Deep heat dissipating fins
• Cast aluminum construction for even gasket sealing
• Satin Black finish

Holley is pleased to offer their Vintage Series Small Block Chevy Valve Covers.

Product Features:

• Designed to fit all 1958-86 Small Block Chevy engines with perimeter bolt patterns
• Die-cast aluminum construction ensures high detail and reduces the opportunity for warping of the valve cover flange and oil leaks
• 3.3″ tall (3.5″ overall) with pre-installed internal oil baffles (oil fill and PCV grommets also included)
• Available with and without emissions provisions for your custom application (emissions compliant model includes pre-installed internal oil baffles in both covers, as well as PCV and oil fill grommets)
• Offered in natural cast, polished, satin black with machined fins, and factory orange with machined fins

These new products are the first of the Vintage Series family of die-cast aluminum dress up products featuring a classically inspired finned design and a retro-style Holley script brand mark.

Product Features:

• Designed to fit all 1958-86 Small Block Chevy engines with perimeter bolt patterns
• Die-cast aluminum construction ensures high detail and reduces the opportunity for warping of the valve cover flange and oil leaks
• 3.3″ tall with a solid body for non-emissions applications or custom crankcase ventilation setups
• Available with and without emissions provisions for your custom application (emissions compliant model includes pre-installed internal oil baffles in both covers, as well as PCV and oil fill grommets)
• Offered in natural cast, polished, satin black with machined fins, and factory orange with machined fins

These new products are the first of the Vintage Series family of die-cast aluminum dress up products featuring a classically inspired finned design and a retro-style Holley script brand mark.

Product Features:

• Designed to fit all 1958-86 Small Block Chevy engines with perimeter bolt patterns
• Die-cast aluminum construction ensures high detail and reduces the opportunity for warping of the valve cover flange and oil leaks
• 3.3″ tall (3.5″ overall) with pre-installed internal oil baffles (oil fill and PCV grommets also included)
• Available with and without emissions provisions for your custom application (emissions compliant model includes pre-installed internal oil baffles in both covers, as well as PCV and oil fill grommets)
• Offered in natural cast, polished, satin black with machined fins, and factory orange with machined fins

Holley is pleased to offer their Vintage Series Small Block Chevy Valve Covers.

Product Features:

• Designed to fit all 1958-86 Small Block Chevy engines with perimeter bolt patterns
• Die-cast aluminum construction ensures high detail and reduces the opportunity for warping of the valve cover flange and oil leaks
• 3.3″ tall (3.5″ overall) with pre-installed internal oil baffles (oil fill and PCV grommets also included)
• Available with and without emissions provisions for your custom application (emissions compliant model includes pre-installed internal oil baffles in both covers, as well as PCV and oil fill grommets)
• Offered in natural cast, polished, satin black with machined fins, and factory orange with machined fins

High quality valve covers that help you solve rocker clearance issues. Great for when you just can’t seem to stop those thin steel ones from leaking oil. Good for high performance street, drag and oval track racing. They feature an extended sealing lip to positively locate and secure the gasket and stop it from moving to eliminate oil leaks. These Mr. Gasket covers are precision die cast for light weight and a perfect fit.

Product Features:

• Fits small block Chevy engines
• Polished cast aluminum construction
• Tall design cover for added rocker clearance
• Sold as a pair
• Stops Gasket From Moving
• A Perfect Fit
• Beautifully Polished To A High Luster

TSP Valve Covers are constructed of high-quality materials and are available for any look and application. We?ve got cast aluminum valve covers for the classic or retro look and fabricated aluminum for racing. Our fabricated covers feature CNC-machined rails and are completely TIG welded. They offer excellent stability and valve train clearance along with great looks. So regardless of the application, we?ve got you ?covered.?

Product Features:

• Mounting Style: Perimeter Bolt
• Material: Fabricated Aluminum
• Gasket: Not Included
• Hardware: Not Included

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

• PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
• SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
• NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
• STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
• DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces