1980 Volvo 242 Differentials

Manufactured with premium-grade steel, National taper bearing sets feature crowned raceways and rollers to ensure even load distribution.

Product Features:

• CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
• PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
• SMOOTH ROTATION: Crowned raceways and rollers for even load distribution
• OE-STYLE DESIGN: Engineered to meet OE specifications
• COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
• RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a Limited warranty against defect. Does not fit Std. JK Carrier. Use YC D706008

Product Features:

• Fits Dana Spicer 30 with 27 spline axles
• Made from 9310 steel for added strength
• Replaces the spiders in a standard carrier case

Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.

Product Features:

• Pinion nut for Dana Spicer 25, 27, 30, 44, 50 and GM 7.75″
• 3/4″ x 16 thread

Yukon Gear & Axle offers a full line of top quality differential tools to save time and money.

Product Features:

• Fits HM88610 race
• All steel construction
• For accurate installation of bearing races

Yukon Gear & Axle spider gear kits feature higher quality materials and better manufacturing techniques than OEM to ensure a longer lasting spider gear set. Kit delivers everything needed for a complete and proper spider gear set replacement.

Product Features:

• Spider gear kit
• Fit Dana Spicer 30 open differential with 27 spline axles
• Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.

Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.

Product Features:

• Side gear thrust washer for Dana Spicer 25, 27, 30 and AMC Model 35
• 1.560″ I.D.
• Fits standard open differentials only

These Yukon replacement diff covers take your rig a step beyond the boring factory look. They are the stock OE design finished in chrome.

Product Features:

• Fits standard rotation Dana Spicer 30
• Chrome

Yukon shim kits are precision machined and tailored for each individual application to ensure you have the right shims for every set up.

Product Features:

• Complete shim kit for Dana Spicer 30 front and rear, also Dana Spicer 36

Yukon 1541H alloy 6 lug right hand rear axle for ’97 to ’04 Chrysler 9.25″ Durango with a length of 30-1/2 inches and 31 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. This is a C-clip axle.

Product Features:

• Cover gasket
• Fits Dana Spicer 30

Yukon replacement standard open carrier case for Dana 30, 3.54 & down, 1.810″ tall. If purchasing this case for a D30 JK front, you will need to also purchase spider gear set YPKD30-S-27.

Product Features:

• Standard open carrier case
• Fits Dana Spicer 30
• 3.54 and down ratio only
• Does not include spider gears

Yukon Gear and Axle manufactures a complete line of general replacement and performance series of pinion yokes for many street, racing, and heavy-duty off-road applications.

Product Features:

• Fits Dana Spicer 30 and 44
• 26 spline
• 1350 u-joint size
• Outside snap ring design
• 3.625″ snap ring span
• 1.188″ cap diameter
• Strap style

Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:

• D30 REAR BRG, SEAL & GS KIT FORD 66-90

Yukon Minimum Installation Kits are a low-cost solution for ring and pinion gear changes in newer vehicles where the bearings can be reused. Kits include all high-quality components for a smooth differential set up.

Product Features:

• Fits Dana Spicer 30 rear
• Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.

Product Features:

• Brand may vary by location

Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:

• High-precision and High-quality components used in all KITs
• Coverage of classic and new high-tech solutions for the best system coverage

Set-up carrier bearing kit (2 bearings, no races) LM501349. No return.

Product Features:

• Set up bearing kit
• Fits Dana Spicer 30
• Easily slips on and off carrier journals to allow for easier carrier shim adjustment

Dana 30 & Dana 44 Power Lok bolt, left hand, & 8.75″ Chrysler & 55P.

Product Features:

• Power Lok case bolt for Dana Spicer 30, Dana Spicer 44, Chrysler 8.75″ and 1955-1964 GM passenger car
• Left hand thread

Yukon shim kits are precision machined and tailored for each individual application to ensure you have the right shims for every set up.

Product Features:

• Carrier shim kit for Dana Spicer 30 and Dana Spicer 44 with 19 spline axles

Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.

Product Features:

• Oil baffle for Dana Spicer 30, Dana Spicer 44 IFS, Dana Spicer 50, AMC Model 35 IFS

Yukon Pinion Installation Kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings and races can be reused. This kit features Timken bearings and races along with high-quality seals and small parts. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your gear set.

Product Features:

• Fits Dana Spicer 30 rear
• Included are pinion bearings and races, pinion seal, pinion nut, complete pinion shim kit, and marking compound with brush.

Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.

Product Features:

• Cross pin shaft for Dana Spicer 30
• Fits standard open differentials only

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

• PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
• SMOOTH ROTATION – Crowned raceways for even load distribution
• OE-STYLE DESIGN – Engineered to meet OE specifications
• COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
• RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

Valvoline Full Synthetic MaxLife Multi-Vehicle ATF, the No. 1 ATF product, suitable for use in 95% of vehicles. And now, it’s recommended for most belt & chain-driven continuously variable transmissions (CVT). Featuring advanced additives to prevent the major causes of transmission breakdown, it’s designed to help prevent leaks, reduce wear & tear, and maximize performance. Has improved thermal stability for longer fluid life, better viscosity stability for consistent transmission operation, and frictional enhancements for smooth gear engagements. Valv MaxLife Multi-Vehicle ATF is suitable for most Ford, GM, Toyota, Honda, Nissan, Hyundai, Subaru, BMW, Mercedes, Volvo, VW & Audi vehicles. Recommended for use in: GM DEXRON-II, DEXRON-III, DEXRON-VI, and DEX-CVT; Ford MERCON LV; Toyota/Lexus Type T, T-II, T-IV, WS, CVTF FE, and CVTF TC; Honda/Acura ATF-Z1 and Honda CVT; Nissan/Infiniti Matic-D, Matic-J, Matic-K and Matic-S; Hyundai/Kia SP-II, SP-III, SP-IV and SPH-IV; BMW 7045E, ETL 8072B, LA2634 and LT71141; Allison C-4; Mercedes-Benz NAG-1; Volvo 1161521, 1161540, 97340 and 1273.41; Subaru ATF HP, Lineartronic chain CVT and CVT-II, Lineartronic High Torque CVT, and CV-30; and VW/Audi G-052-025-A2 and G-052-162-A1. CURRENTLY UNABLE TO SHIP THIS PRODUCT TO CUSTOMERS LOCATED IN CALIFORNIA

Product Features:

• FOR USE IN 95% OF VEHICLES INCLUDING MOST CVTs in operation with US registered light duty applications
• HIGH PERFORMANCE CONDITIONING AGENTS prolong seal elasticity to prevent leaks
• IMPROVED DURABILITY & TRANSMISSION LIFE with anti-wear technology to avoid costly repairs
• ENHANCED HIGH & LOW TEMP PERFORMANCE supports transmission fluid in all weather situations

Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.

Product Features:

• Pinion nut washer for Dana Spicer 25, 27, 30, 44 and 50

5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.

Product Features:

• Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
• 1/2″ head

Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.

Product Features:

• Roll pin for Dana Spicer 30 and Dana Spicer 44
• 0.235″ diameter

The Yukon Zip Locker is the latest in on-demand traction. Its air-operated design allows you to switch from an open differential to 100% lockup when you need it, giving you the ultimate in driver select ability.

Product Features:

• Seal housing for Dana Spicer 30 and AMC Model 35
• Includes O-rings