from

$74.99

New Platinum Pro Electric Fuel Pump, New Strainer Required For Warranty

Product Features:

New Strainer Included
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$138.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
Improved pump performance as a result of Delphi’s innovative design and durability
Restores fast pressure performance and system integrity, translating to better pumping through less energy
Part is validated, tested and matched to the right vehicle application
Lower amperage draws less load on vehicle’s electrical system
Always be sure to check and clean fuel tank to avoid unnecessary returns
Always replace the fuel strainer when doing a fuel pump repair

from

$29.49

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$21.79

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$16.79

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control
“Torque Override” feature aids in the proper installation of the fuel cap. It produces an audible click as the O-ring that seals the cap is properly compressed.

from

$84.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$12.49

To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye

Product Features:

Helps avoid premature fuel pump failure
Lint free towel included
Low suds formulation
Removes harmful contaminants from the fuel tank

from

$12.29

This oxygen sensor gasket is designed to match the fit and function of the original gasket on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this oxygen sensor gasket is designed to match the fit and function of the original gasket on specified vehicles
Restores functionality – this gasket is made to fit and fully restore part functionality after the original gasket fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$32.99

Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation advancements. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance. Bosch oxygen sensors deliver exceptional OE level reliability, performance and durability, further improving service life of the product.

Product Features:

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Includes Smart Link Connector, no soldering required
No special tools required for installation
Seared protection tube due to 100% functional quality test
Performance meets or exceeds OE specifications

from

$37.99

Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation advancements. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance. Bosch oxygen sensors deliver exceptional OE level reliability, performance and durability, further improving service life of the product.

Product Features:

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Includes Smart Link Connector, no soldering required
No special tools required for installation
Seared protection tube due to 100% functional quality test
Performance meets or exceeds OE specifications

from

$68.28

NTK is the world’s largest supplier and manufacturer of original equipment oxygen sensors. NTK oxygen sensors meet or exceed original equipment specifications and are equipped with waterproof factory fitted connectors to ensure a perfect fit every time. Every NTK oxygen sensor is individually tested to ensure the highest level of quality and reliability.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Extensively Tested During Manufacture to Guarantee Quality and Reliability
Supplied With a Factory-Fitted OEM Connector for Easy Installation
Precision manufactured with a sensing element incorporating NTK’s premier technical ceramics Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install.

from

$63.42

The Bosch oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
OE Style connectors and wire lengths.
Base ceramic probe of Zirconium and Yttrium.
Patented Platinum Power Grid.

from

$1.86

Fuel Inject Cushion Ring

from

$12.49

CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:

Premium OE quality materials
Services one injector

from

$48.49

CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:

Each unit is 100% tested to OE specifications
Includes new O-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$48.49

CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:

Each unit is 100% tested to OE specifications
Includes new O-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$174.99

Blue Streak Electronics is the leader in remanufactured electronics since 1987 and a name synonymous with OE performance. Blue Streak Electronics provides the highest quality, most comprehensive line of Engine, Transmission, Body, Powertrain control modules, Mass Air Flow Sensors, Diagnostic tools and Flash Programming solutions.

Product Features:

BSE mass air flow sensors are 100% tested to perform like new. OEM designs are analyzed, and design upgrades are implemented when necessary to provide improved durability over the OEM design.
We use automated computerized test equipment to ensure functionality and reliability.
All Mass Airflow sensors are validated for extended run, extreme hot and cold, over-voltage, over-current, and shock and vibration.
All parts are THE ORIGINAL parts your car was built with. All parts are validated for on car fit, form, and function.

from

$115.99

CARDONE Remanufactured Mass Air Flow Sensors (MAFS) precisely track O.E. output curves and maintain specific tolerances to ensure accurate scan tool readings for proper operation. 100% re-soldering of critical components ensures superior electrical connections, eliminates intermittent failures and lengthens product life. With CARDONE Mass Air Flow Sensors (MAFS), you can expect smooth vehicle performance.

Product Features:

100% re-solder of critical components ensures superior electrical connections, no intermittent failures and longer product life.
On-car vehicle validation routines ensure that modules meet all form, fit, durability and performance requirements.
All modules are 100% tested with automated computer test equipment to ensure full functionality and reliability.
Our sensors precisely track O.E. output curves and maintain spec tolerances to ensure accurate feedback to the vehicle’s engine control management system.
Components are rated to handle demanding temperature variations for optimum reliability in every environment.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$102.99

Blue Streak Electronics is the leader in remanufactured electronics since 1987 and a name synonymous with OE performance. Blue Streak Electronics provides the highest quality, most comprehensive line of Engine, Transmission, Body, Powertrain control modules, Mass Air Flow Sensors, Diagnostic tools and Flash Programming solutions.

Product Features:

BSE mass air flow sensors are 100% tested to perform like new. OEM designs are analyzed, and design upgrades are implemented when necessary to provide improved durability over the OEM design.
We use automated computerized test equipment to ensure functionality and reliability.
All Mass Airflow sensors are validated for extended run, extreme hot and cold, over-voltage, over-current, and shock and vibration.
All parts are THE ORIGINAL parts your car was built with. All parts are validated for on car fit, form, and function.

from

$7.99

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$2.20

Fuel Inject Cushion Ring, Grommet

from

$2.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features: