1980 Porsche 924 Engine Oils

Castrol EDGE 5W-30 is one of Castrol’s strongest oils and has been formulated to provide Superior Performance and Protection in 7 Critical Areas including fuel economy, high temperature performance, sludge control and wear protection for up to 20,000 miles between oil changes. Today’s engines are smaller, more powerful and under more pressure than ever before. Castrol EDGE has been engineered to withstand the intense friction of modern engines and provides 10X better high stress performance than the latest industry standard. Peak engine loads and extreme temperature can break down weaker lubricants, so viscosity control is the ultimate measure of strength for any motor oil. Castrol EDGE has been proven 3X stronger against viscosity breakdown than the leading full synthetic so its shear stable and maintains its initial viscosity to provide protection over an extended drain cycle of up to 20,000 miles between oil changes. Stronger for Longer. Volume: 5 quarts.

Mobil 1 High Mileage motor oil utilizes our signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness to vehicles of all ages. Specialty components in synthetic oil extend engine life by reducing the friction that causes deposits and sludge buildup – keeping critical engine parts clean and protected for up to 15,000 miles between oil changes.(1) Mobil 1 High Mileage motor oil meets ILSAC GF-7 standards, offering superior oxidation control, enhanced protection against pre-ignition and timing chain wear, and excellent cold-start and low-temperature performance. Mobil 1 is the No. 1 selling motor oil in America at retail,(2) trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR(R). Volume: 5 quarts.

Mobil 1 Extended Performance motor oil utilizes our signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness to vehicles of all ages. Specialty components in synthetic oil extend engine life by reducing deposits and sludge buildup – keeping critical engine parts clean and protected for up to 25,000 miles between oil changes.(1) Mobil 1 Extended Performance motor oil meets ILSAC GF-7 standards, offering superior oxidation control, enhanced protection against pre-ignition and timing chain wear, and excellent cold-start and low-temperature performance. Mobil 1 is the No. 1 selling motor oil in America at retail,(2) trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR(R). (1)Protects for 25,000 miles or 1 year, whichever comes first (2)Source: Circana/ Retail Tracking Service/ Dollar Sales/ 52 weeks ending February 1, 2025 (3)vs GF-7 fuel economy requirement Volume: 1 quart.

Castrol® EDGE® High Mileage 5W-30 is an advanced full synthetic motor oil that is specifically designed for vehicles with over 75,000 miles. It’s been engineered to provide Superior Protection in 7 Critical Areas including corrosion prevention, sludge Control, timing and friction wear and also contains a proprietary additive to protect the emission system. Our Phosphorus Replacement Technology reduces harmful phosphorus to protect the catalytic converter and extend maximum performance for your high mileage vehicle. Volume: 1 quart.

Mobil 1 Turbo Diesel Truck 5W-40 is a full synthetic heavy duty diesel motor oil that helps to extend engine life while providing long drain capability and potential fuel economy benefits (1) for modern diesel engines operating in severe applications. Utilizes state-of-the-art technology to help deliver exceptional performance and is recommended for use in all super high-performance diesel applications, including modern low emission engine designs with Exhaust Gas Recirculation (EGR), as well as refrigerated units and well-maintained engines. This formula provides thermal and oxidative stability to help prevent high-temperature deposits and low-temperature sludge buildup. Its exceptional low temperature pumpability allows for easy engine start-up and helps to reduce wear. Mobil 1 Turbo Diesel Truck 5W-40 is recommended for use in a wide range of light-duty applications such as turbo diesel pick-up trucks, as well as heavy-duty applications and operating environments found in the on-road transport and off-road mining, construction, and agricultural industries. The performance of Mobil 1 Turbo Diesel Truck 5W-40 is the result of extensive cooperative development work with major equipment builders and application of the latest lubrication technology. ((1) Compared to a 15W-40 conventional engine oil. Actual savings are dependent upon vehicle/engine type, outside temperature, driving conditions, and your current engine oil viscosity. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US.) Volume: 1 gallon.

Mobil 1 Extended Performance High Mileage motor oil utilizes our signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness to vehicles of all ages. Specialty components in synthetic oil extend engine life by reducing deposits and sludge buildup – keeping critical engine parts clean and protected for up to 25,000 miles between oil changes.(1) Mobil 1 Extended Performance High Mileage motor oil meets ILSAC GF-7 standards, offering superior oxidation control, enhanced protection against pre-ignition and timing chain wear, and excellent cold-start and low-temperature performance. Mobil 1 is the No. 1 selling motor oil in America at retail,(2) trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR(R). (1)Protects for 25,000 miles or 1 year, whichever comes first (2)Source: Circana / Retail Tracking Service/ Dollar Sales/ 52 weeks ending February 1, 2025 (3)vs GF-7 fuel economy requirement Volume: 1 quart.

Castrol EDGE 5W-50 is one of Castrol’s strongest oils and has been formulated to provide Superior Performance and Protection in 7 Critical Areas including fuel economy, high temperature performance, sludge control and wear protection for up to 20,000 miles between oil changes. Today’s engines are smaller, more powerful and under more pressure than ever before. Castrol EDGE has been engineered to withstand the intense friction of modern engines and provides 10X better high stress performance than the latest industry standard. Peak engine loads and extreme temperature can break down weaker lubricants, so viscosity control is the ultimate measure of strength for any motor oil. Castrol EDGE has been proven 3X stronger against viscosity breakdown than the leading full synthetic so its shear stable and maintains its initial viscosity to provide protection over an extended drain cycle of up to 20,000 miles between oil changes. Stronger for Longer. Volume: 1 quart.

Longtime High Tech 5W-30 Full Synthetic Engine Oil is expertly crafted for diesel engines, offering exceptional performance and protection. Designed with Low SAPS technology, it is ideal for vehicles equipped with diesel particulate filters (DPF), ensuring compatibility with modern emission systems. This premium 5W-30 oil promotes smooth engine operation, making it perfect for engines with turbochargers and catalytic converters. Its advanced formula delivers excellent wear protection, prolonging engine service life while supporting extended oil change intervals as recommended by manufacturers. Engineered for fast oil penetration, it ensures optimal lubrication from the moment you start your vehicle. Made in Germany, this full synthetic oil is a reliable choice for maintaining peak engine performance and efficiency.

Castrol EDGE 10W-30 is one of Castrol’s strongest oils and has been formulated to provide Superior Performance and Protection in 7 Critical Areas including fuel economy, high temperature performance, sludge control and wear protection for up to 20,000 miles between oil changes. Today’s engines are smaller, more powerful and under more pressure than ever before. Castrol EDGE has been engineered to withstand the intense friction of modern engines and provides 10X better high stress performance than the latest industry standard. Peak engine loads and extreme temperature can break down weaker lubricants, so viscosity control is the ultimate measure of strength for any motor oil. Castrol EDGE has been proven 3X stronger against viscosity breakdown than the leading full synthetic so its shear stable and maintains its initial viscosity to provide protection over an extended drain cycle of up to 20,000 miles between oil changes. Stronger for Longer. Volume: 1 quart.

FRAM Engine Oil Full Synthetic SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos1 Gen 3 and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil Full Synthetic SAE 5W-30 & is a fully licensed GM dexos1 Gen 3 motor oil. Volume: 5 quarts.

FRAM Engine Oil SAE 5W-30 utilizes a blend of high quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories. Volume: 5 quarts.

FRAM Conventional High Mileage 5W30 Engine Oil is specially designed with enhanced  additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with  increased efficiency and power. They are specially designed for engines with over 75,000 miles.  FRAM Conventional High Mileage 5W30 Engine Oil will protect domestic and imported vehicles and  equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed  all new car manufacturers’ warranty requirements as well as the stringent industry standards API  SP/CF, and 5W30 grades will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category. Volume: 5 quarts.

FRAM Engine Oil SAE 5W-30 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories. Volume: 1 quart.

FRAM Engine Oil SAE 10W-30 utilizes a blend of high quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 10W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories. Volume: 5 quarts.

FRAM Conventional High Mileage 10W-30 Engine Oil is specially designed with enhanced  additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with  increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 10W30 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed  all new car manufacturers’ warranty requirements as well as the stringent industry standards API  SP/CF, and 10W30 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category. Volume: 5 quarts.

FRAM Engine Oil SAE 10W-30 utilizes a blend of high-quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 10W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories. Volume: 1 quart.

FRAM Conventional High Mileage 5W30 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 5W30 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF, and 5W30 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category. Volume: 1 quart.

FRAM Full Synthetic High Mileage SAE 10W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 10W-30 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 10W-30 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories. Volume: 5 quarts.

FRAM Engine Oil Full Synthetic SAE 10W-30 is a full synthetic motor oil blended with high  quality synthetic base stocks and the latest additive technology to provide the ultimate protection  for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI)  and turbo gas-direct engine (TGDI) designs as well as providing increased protection for  carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 10W-30  contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead  to pre-mature engine failure and is a major concern of the automotive industry for vehicles  employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation & shear stability over previous oil categories. Volume: 5 quarts.

FRAM Full Synthetic High Mileage SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 5W-30 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 5W-30 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories. Volume: 1 quart.

FRAM Conventional High Mileage 10W30 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 10W30 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed all new car manufacturers’ warranty requirements as well as the stringent industry standards API SP/CF, and 10W30 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category. Volume: 1 quart.

FRAM Small Engine Oil SAE 10W30 is a high-quality conventional oil designed specifically for small engines, making it an excellent choice for lawn equipment and other similar machinery. With its SAE 10W-30 weight, this oil provides reliable performance across a range of temperatures, ensuring smooth operation and optimal engine protection. Its formulation is tailored to meet the demands of small engines, helping to reduce wear and extend engine life. Packaged in a convenient 1-quart size, it’s perfect for quick refills or routine maintenance. Trust FRAM to deliver the durability and performance your equipment needs to keep running efficiently. Volume: 1 quart.

Mobil 1 FS European Car Formula 5W-40 helps to extend engine life, even in severe conditions, and protects critical engine parts for up to 10,000 miles between oil changes (1) . Its uniform synthetic oil molecules reduce friction, helping to prevent deposits and sludge buildup. This technologically advanced formulation provides excellent internal engine heat protection (up to 500 degrees Fahrenheit), and low-temperature protection (to -40 degrees Fahrenheit), supporting quick cold-weather starting and ultra-fast protection. Mobil 1 FS European Car Formula 5W-40 also helps control oxidation to prevent oil breakdown. Approved for many Mercedes-Benz, VW, Audi and Porsche vehicles, this formula provides excellent turbocharged engine protection. Mobil 1 is America’s leading synthetic motor oil brand at retail (2) , recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR. ((1) Protects for 10,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US. (2) Source: The NPD Group/ Retail Tracking Service/ Dollar Sales/ PCMO Full Synthetic/ 52 weeks ending July 1, 2023) Volume: 1 quart.

FRAM Full Synthetic Heavy Duty 5W-40 is a fully synthetic product formulated to provide  the ultimate in diesel engine oil protection. It is designed to protect EGR/Low-Emission Diesel  Engines while maximizing the durability of Diesel Particulate Filters (DPF’s). New additive  systems and rigorous laboratory and field testing have proven that FRAM Full Synthetic  Heavy Duty Diesel 5W-40 offers better and stronger armor against wear, improved performance  and greater fuel economy. FRAM Full Synthetic Heavy Duty Diesel 5W-40 helps your engine  operate within the new emission and pollution requirements as well as meeting or exceeding the  OEM requirements for every new engine being built by every engine manufacturer worldwide, including but not limited to: Caterpillar, Cummins, DaimlerChrysler (Mercedes Benz), Detroit  Diesel, Volvo, Mack, MAN, and Navistar. Volume: 1 gallon.

FRAM Engine Oil Full Synthetic SAE 10W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories. Volume: 1 quart.

FRAM Full Synthetic EURO Formula 5W-40 is premium fully synthetic motor oil formulated with high quality synthetic base oils and the latest additive technology to provide the ultimate protection for your engine. FRAM Full Synthetic EURO Formula 5W-40 has superior detergency to provide engine cleanliness yet is formulated as a Mid-SAPS oil to protect emissions control systems including diesel particulate filters (DPF). This engine oil meets the performance requirements of many European OEM specifications including Mercedes Benz, Volkswagen, BMW, Renault, Porsche, Peugeot and GM dexos2. Volume: 1 quart.

FRAM Heavy Duty 15W-40 Diesel Oil is premium high performance diesel engine oil utilizing the latest in engine oil additive technology to offer the ultimate protection of your engine. Designed to meet or exceed the latest OEM and API CK-4 requirements, it is also backwards compatible to previous OEM & API specifications such as CJ-4, CI-4, CI-4+, and CH-4. STP 15W-40 Diesel Oil carries the API SN classification for use in gasoline engines and is an excellent choice for operators with mixed fleets. The FRAM HD 15W-40 diesel oil is specially designed to protect EGR/Low-Emission Diesel Engines while maximizing the durability of Diesel Particulate Filters (DPF’s). Volume: 5 gallons.

FRAM Heavy Duty 15W-40 Diesel Oil is premium high performance diesel engine oil utilizing the latest in engine oil additive technology to offer the ultimate protection of your engine. Designed to meet or exceed the latest OEM and API CK-4 requirements, it is also backwards compatible to previous OEM and API specifications such as CJ-4, CI-4, CI-4+, and CH-4. STP 15W-40 Diesel Oil carries the API SN classification for use in gasoline engines and is an excellent choice for operators with mixed fleets. The FRAM HD 15W-40 diesel oil is specially designed to protect EGR/Low-Emission Diesel Engines while maximizing the durability of Diesel Particulate Filters (DPF’s). Volume: 5 gallons.