1980 Pontiac Firebird Exhaust Manifold and Headers
More 1980 Pontiac Firebird Exhaust Manifold and Headers
Find your specific 1980 Pontiac Firebird original or aftermarket Exhaust Manifold and Headers below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1980 Pontiac Firebird Exhaust Manifold and Headers
ARP Auto Racing – ARP Header Bolt Kit (Part No.100-1402)
from
$69.99
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless steel kit with 12-point nuts. The stainless material is not affected by corrosion or extreme heat, making it ideal for the application. What’s more, the compact 12-point nut lets you easily slip a socket close to the pipe. Each ARP accessory stud or bolt kit includes the specific number of parts for your appliaction, plus premium-quality washers and hex or 12-point nuts, as required. Studs are manufactured with a unique nut-starter nose that helps prevent cross-threading. Studs and bolts come either Black Oxide chrome moly or Stainless. Both are nominally rated at 180,000 psi tensile strength; substantially stronger than Grade 8 hardware. Specially drilled NASCAR models are available for those who wish to safety wire their bolts to prevent loosening.
Product Features:
See More
Product Features:
- 3/8″-16 Thread Size(s)
- Steel
- Black Oxide
- Small Block Chevy
- 12-Point Head
- Set of 12
- 1.670″ Overall Length
Hooker Headers – Competition Header (Part No.3901HKR)
from
$427.99
LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- High Performance
- Affordable
- Durable 16 Gauge Material
- Welds Easier
- Lasts Longer
- Heat Cured
- High Heat Resistant
JBA Performance – 1808S-1 1 5/8" Header Shorty Stainless Steel 01-02 Camaro/Firebird LS1 (Part No.1808S-1)
from
$692.99
JBA shorty headers are one of the best performance upgrades available for any application. Hot Rodmagazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers aresignificantly less restrictive than the stock manifol
Product Features:
See More
Product Features:
- JBA Performance Exhaust 1808S-1 1 5/8″ Header Shorty Stainless Steel 01-02 Camaro/Firebird LS1
- Mandrel bent stainless steel tube
Hooker Headers – LS Cast Iron Exhaust Manifold (Part No.8501-3HKR)
from
$576.99
LS Cast Iron Exhaust Manifold
Hooker Headers – Competition Header (Part No.4902HKR)
from
$392.99
LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- High Performance
- Affordable
- Durable 16 Gauge Material
- Welds Easier
- Lasts Longer
- Heat Cured
- High Heat Resistant
Hooker Headers – Super Comp. Header (Part No.2117-1HKR)
from
$1163.00
Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- Long Tube Lengths
- Long Transition Collectors
- Monstrous Low-Mid Range Torque
- Keep Top End Horsepower
- Provides Finest Fit
- Most Durable Design Available
Dorman – Direct Fit Exhaust Manifold: Without Heat Shield (Part No.674-197)
from
$144.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Product Features:
See More
Product Features:
- Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
- Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance
- Complete repair – includes all necessary gaskets and downpipe hardware
- Trustworthy design – built by industry leader in aftermarket manifolds
Patriot Exhaust – H8068 1 5/8" Clippster Header Chevrolet Camaro Small Block Chevrolet 82-92 Raw (Part No.H8068)
from
$406.99
Clippster style headers are perfect for grafting modern uni-body front clipsuspensions to street rods, muscle cars and trucks. Clippster headers uselonger primaries than Tight Tucks, yet shorter than full length headers.Collectors exit toward the rear
Product Features:
See More
Product Features:
- Patriot Exhaust H8068 1 5/8″ Clippster Header Chevrolet Camaro Small Block Chevrolet 82-92 Raw
- Mid length or “clippster” headers provide improved ground clearance for popular muscle cars and street rods.
Patriot Exhaust – H8068-1 1 5/8" Clippster Header Chevrolet Camaro Small Block Chevrolet 82-92 Coated (Part No.H8068-1)
from
$629.99
Clippster style headers are perfect for grafting modern uni-body front clipsuspensions to street rods, muscle cars and trucks. Clippster headers uselonger primaries than Tight Tucks, yet shorter than full length headers.Collectors exit toward the rear
Product Features:
See More
Product Features:
- Patriot Exhaust H8068-1 1 5/8″ Clippster Header Chevrolet Camaro Small Block Chevrolet 82-92 Coated
- Mid length or “clippster” headers provide improved ground clearance for popular muscle cars and street rods.
Hooker Headers – Super Comp. Header (Part No.2217-1HKR)
from
$1231.00
Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- Long Tube Lengths
- Long Transition Collectors
- Monstrous Low-Mid Range Torque
- Keep Top End Horsepower
- Provides Finest Fit
- Most Durable Design Available
Hooker Headers – Super Comp. Header (Part No.2217HKR)
from
$908.99
Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- Long Tube Lengths
- Long Transition Collectors
- Monstrous Low-Mid Range Torque
- Keep Top End Horsepower
- Provides Finest Fit
- Most Durable Design Available
Dorman – Direct Fit Exhaust Manifold: Without Heat Shield (Part No.674-543)
from
$301.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Product Features:
See More
Product Features:
- Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
- Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance
- Complete repair – includes all necessary gaskets and downpipe hardware
- Trustworthy design – built by industry leader in aftermarket manifolds
Patriot Exhaust – H8301-1 1 5/8" Full Length Header Pontiac Firebird 350-455 70-79 Coated (Part No.H8301-1)
from
$619.99
Full length and fenderwell headers provide the ultimate performance for streetrodders with high performance engines. These header styles have longer primarytubes, which help produce more horsepower and torque than Tight Tucks. Chassisheaders fit inside
Product Features:
See More
Product Features:
- Patriot Exhaust H8301-1 1 5/8″ Full Length Header Pontiac Firebird 350-455 70-79 Coated
- Full length headers are typically used for higher RPM horsepower, but can also increase the mid range torque in applications were there is room to fit a long tube design.
Hooker Headers – High-Flow Shorty Headers – Street Legal Performance (Part No.2064HKR)
from
$623.99
Hooker Street Force Headers are designed to be a high performance alternative to the stock O.E. manifolds. These headers are built to accommodate all emission control devices. Please check your application in this section for more information regarding emissions legality.
Product Features:
See More
Product Features:
- Long Tube Lengths
- Long Transition Collectors
- Monstrous Low-Mid Range Torque
- Keep Top End Horsepower
- Provides Finest Fit
- Most Durable Design Available
ARP Auto Racing – 0.750" L, Hex Style Head Type, Black Oxide, Black, Chrome Moly, Set Of 12 (Part No.100-1101)
from
$25.99
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.
Product Features:
See More
Product Features:
- Material Is Not Affected By Corrosion Or Extreme Heat
- The Compact 12-Point Nut Lets You Easily Slip A Socket Close To The Pipe
- Substantially Stronger Than Grade 8 Hardware
- Nominally Rated At 170,000 Psi Tensile Strength
- Set of 12
- 0.75″ Overall Length
ARP Auto Racing – For Use With Chevy Ls V8 Engine, M8 Thread Size, Hex Head, Black Oxide, Set Of 12 (Part No.134-1102)
from
$41.49
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.
Product Features:
See More
Product Features:
- Material Is Not Affected By Corrosion Or Extreme Heat
- The Compact 12-Point Nut Lets You Easily Slip A Socket Close To The Pipe
- Substantially Stronger Than Grade 8 Hardware
- Nominally Rated At 170,000 PSI Tensile Strength
- Set of 12
- 3/8” Wide Header Flange
- 1.181? Underhead Length
Dorman – Help – Manifold Bolt and Spring Kit 3/8-16X1-3/4 In. (Part No.03137)
from
$12.29
Exhaust manifold fastener kits provide a time-saving solution for repairing the manifold. Each kit is designed for direct replacement of rusted or damaged exhaust bolts and springs.
Product Features:
See More
Product Features:
- New hardware helps fix exhaust leaks
- Depending on the application, kits include hardware to securely attach the manifold to the exhaust system
- Also available separately (where applicable)
- Hardened steel construction for long-lasting durability
Felpro – Exhaust Flange (Part No.ES 75111)
from
$27.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Designed and manufactured to meet the needs of the exhaust system repair environment.
- Verified, tested and certified proprietary Organic coating resists corrosion.
- Tightly controlled coefficient of friction ensures reliable installation.
- Application specific kit contents
- Self-locking nuts (where applicable).
Taylor Gaskets – Vibe Lock Header Bolt Kit (Part No.310004)
from
$89.99
Vibe Lock Header Bolt Kit
Dorman – Exhaust Flange Hardware – 4 Bolts And 2 Studs – 3/8-16 (Part No.675-217)
from
$19.29
This engine manifold stud and nut match the fit and function of the original hardware on specific makes and models. Ensure a thorough manifold repair or installation with this durable and reliable hardware.
Product Features:
See More
Product Features:
- Direct replacement – this engine manifold stud and nut match the fit and function of the original stud and nut on specified years, makes and models
- Ideal solution – replaces missing or damaged hardware to ensure a thorough manifold installation or repair
- Durable construction – made of quality materials for reliable service life
- Quality assured – backed by a team of product engineers based in the United States
Taylor Gaskets – Vibe-Lock Bolt (Part No.310016)
from
$89.99
Vibe-Lock Bolt
ARP Auto Racing – For Use With Chevy Small Block, 3/8"-16, 0.75"L, Hex Head, Natural Ss, Set Of 12 (Part No.400-1101)
from
$24.99
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.
Product Features:
See More
Product Features:
- Material Is Not Affected By Corrosion Or Extreme Heat
- The Compact 12 Point Nut Lets You Easily Slip A Socket Close To The Pipe
- Substantially Stronger Than Grade 8 Hardware
- Nominally Rated At 170,000 PSI Tensile Strength
- 0.75″ Underhead Length
- Set of 12
Dorman – Exhaust Manifold Hardware Kit (Part No.675-226)
from
$22.49
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
- Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
ARP Auto Racing – For Use With Chevy Small Block, Black Oxide, Black, Chrome Moly, Set Of 12 (Part No.100-1201)
from
$18.99
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.
Product Features:
See More
Product Features:
- Material Is Not Affected By Corrosion Or Extreme Heat
- The Compact 12 Point Nut Lets You Easily Slip A Socket Close To The Pipe
- Substantially Stronger Than Grade 8 Hardware
- Nominally Rated At 170,000 PSI Tensile Strength
- Set of 12
- 0.75″ Overall Length
Mr. Gasket – Exhsthdrbolt (Part No.2230G)
from
$47.99
Headlock&trade: Bolts eliminate the need for lock washers, Period. That’s because each Headlock&trade: Bolt features 24 equally-spaced, stainless steel teeth serrations that bite into and hold onto the attaching surface-eliminating the need for lock-washers.
Product Features:
See More
Product Features:
- 12 per Package
- Includes a ball-head/hex-key socket-installation tool that makes it easy to get them started
- 410 stainless steel
- Minimum 180,000 PSI tensile strength
- 24 equally spaced clockwise teeth
Walker – Exhaust 35574 Catalytic Converter Air Tube (Part No.35574)
from
$87.99
Walker®, with our worldwide OE partnerships and manufacturing facilities, possesses the technical excellence needed to meet today’s emissions control needs, while developing solutions for tomorrow’s challenges. Walker® is a ‘one-stop’ convenience, offerin
Product Features:
See More
Product Features:
- Offered in a variety of styles and sizes for your installation needs
- Constructed from durable and robust material for long life
- Universal fit for installation flexibility
- Designed to work seamlessly with OE and Walker aftermarket replacement parts
- New Walker® accessories help to ensure effective exhaust repairs
ARP Auto Racing – For Use With Chevy Small Block, 3/8"-16, 1"L, Hex Head, Natural, Ss, Set Of 12 (Part No.400-1111)
from
$44.49
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.
Product Features:
See More
Product Features:
- Material Is Not Affected By Corrosion Or Extreme Heat
- The Compact 12-Point Nut Lets You Easily Slip A Socket Close To The Pipe
- Substantially Stronger Than Grade 8 Hardware
- Nominally Rated At 170,000 Psi Tensile Strength
- 3/8″-16 Thread Size
- 1″ Underhead Length
Dorman – Help – Manifold Bolt and Spring Kit – 3/8-16 x 2-13/16 In. (Part No.03134)
from
$9.99
Exhaust manifold fastener kits provide a time-saving solution for repairing the manifold. Each kit is designed for direct replacement of rusted or damaged exhaust bolts and springs.
Product Features:
See More
Product Features:
- New hardware helps fix exhaust leaks
- Depending on the application, kits include hardware to securely attach the manifold to the exhaust system
- Also available separately (where applicable)
- Hardened steel construction for long-lasting durability
Popular 1980 Pontiac Firebird Exhaust Manifold and Headers Categories
1980 Pontiac Firebird Exhaust Manifold and Headers
Maybe you’re in the middle of a full rebuild of that 1980 Pontiac Firebird. Maybe you just need a couple of Exhaust Manifold and Headers. Either way, Advance Auto Parts has 17 different Exhaust Manifold and Headers in our inventory ranging from $9.99 to $1,163.00. That means you can find the exact parts or products you need to keep that 1980 Pontiac Firebird running smoothly.
Exhaust Manifold and Headers are only as good as their brand. We stock 5 different brands to make sure you have plenty of trusted parts to choose from for your 1980 Pontiac Firebird. Hooker Headers, Dorman, and ARP Auto Racing are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Exhaust Manifold and Headers for your 1980 Pontiac Firebird, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Exhaust Manifold and Headers to keep your 1980 Pontiac Firebird rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Exhaust Manifold and Headers Brands To Make Your 1980 Pontiac Firebird Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1980 Pontiac Firebird demands trusted brand parts and products to keep it running. Many trusted brands of Exhaust Manifold and Headers make up Advance Auto Parts’ inventory, and all are ready to help make your Firebird the best it can be. Be sure to browse some of our top Exhaust Manifold and Headers brands and parts.
Popular Hooker Headers Exhaust Manifold and Headers
We carry Hooker Headers parts in our stock across Exhaust Manifold and Headers categories, plus more. For a 1980 Pontiac Firebird, our most popular Hooker Headers Exhaust Manifold and Headers include:
FAQs for 1980 Pontiac Firebird Exhaust Manifold and Headers
What are the most purchased Exhaust Manifold and Headers for the 1980 Pontiac Firebird?
Out of 17 Exhaust Manifold and Headers for the 1980 Pontiac Firebird, the most popular in our inventory are:
from
$145.99
This product is not rated
Direct Fit Exhaust Manifold: Without Heat Shield
Exhaust Manifold and Headers
from
$26.99
This product is not rated
For Use With Chevy Small Block, 3/8 – 16" Thread Size, .75" L, Natural, Set Of 12
Exhaust Manifold and Header Hardware
from
$44.49
This product is not rated
For Use With Chevy Small Block, 3/8"-16, 1"L, Hex Head, Natural, Ss, Set Of 12
Exhaust Manifold and Header Hardware
