1980 Pontiac Firebird Drivetrains
More 1980 Pontiac Firebird Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1980 Pontiac Firebird, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1980 Pontiac Firebird Drivetrains
Yukon Gear – Standard Open Pinion Gear Thrust Washer For GM 12P And 12T (Part No.33381)
from
$11.99
Standard Open pinion gear thrust washer for GM 12P and 12T.
Product Features:
See More
Product Features:
- Pinion gear thust washer for GM 12 bolt passenger car and truck
- Fits standard open differentials only
Powertrax – Lock Right Locker (Part No.1921-LR)
from
$368.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles. Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction. Powertrax® = Extreme Traction Systems!
See More
Motive Gear – Differential Ring and Pinion (Part No.GM7.5-323)
from
$216.99Product Features:
- GM 10BL 7.5&7.625 R/P 3.23 MG 10 3/8 X 18 LH THRED BLTS, PD=1.438
Dorman – Spindle Washer – I.D. 3/4 In. O.D. 1-21/32 In. Thickness 3/32 In. (sold by each) (Part No.618-005)
from
$3.49
This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – U/Joint Strap Bolt For 14T, 7.5", And 8.5" GM (Part No.33351)
from
$8.49
U/joint strap bolt for 14T, 7.5″, and 8.5″ GM.
Product Features:
See More
Product Features:
- u-joint strap bolt for GM 10.5″ 14 bolt truck, 7.5″ and 8.5″
Yukon Gear – Replacement Bare Case For GM 8.5" & 8.6" Dura Grip (Part No.20107)
from
$386.99
Replacement bare case for GM 8.5″ & 8.6″ Yukon Dura Grip. Fits both 28 & 30 spline applications. This carrier case is for a Yukon Dura Grip ONLY. It is NOT a replacement carrier for a stock positraction.
Product Features:
See More
Product Features:
- Dura Grip positraction carrier case
- Does not include spider gears
- Fits GM 8.5″ and 8.6″
- Fits 2.76 and up ratios only
National – Shaft Repair Sleeve (Part No.99174)
from
$45.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Spectre – Differential Cover (Part No.6071)
from
$52.99
Spectre’s 12 bolt Differential Covers feature a triple chrome plated steel construction. Designed to perform as well as they look, these covers fit a variety of vehicles. Use the Spectre application search for vehicle specific lookup. Includes 12 SAE standard chrome bolts for installation. You’ll need to supply your own bolts if your application requires metric bolts.
Product Features:
See More
Product Features:
- Triple chrome plated steel
- Gasket included
- 12 bolt design
- 12 chrome 5/16 inch -18 x 3/4 inch differential cover bolts included
Yukon Gear – Pinion Install Kit For GM 8.5" Differential (Part No.13069)
from
$176.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits GM 8.5″ rear
- Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
National – Shaft Repair Sleeve (Part No.99210)
from
$47.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Yukon Gear – Positraction Internals For 7.5" And 7.625" GM With 28 Spline Axles (Part No.16117)
from
$279.99
Yukon positraction internals for 7.5″ and 7.625″ GM with 28 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit does not include clutches. All components come with a one year warranty against manufacturing defects. This kit fits Yukon Dura Grip & Eaton positraction cases. It is not compatible with any other positractions.
Product Features:
See More
Product Features:
- Spider gear kit
- Fits GM gm 7.5″ and 7.625″ with 28 spline Dura Grip positraction
- Includes two side gears, four pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
Neapco – Double Cardan CV Flange Yoke (Part No.N3R-83-482)
Dorman – Spindle Nut 3/4 In.-20 Hex 1-1/16 In. (sold by each) (Part No.615-065)
from
$4.29
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Pinion Nut (Part No.33150)
from
$11.99
Pinion nut for GM 12 bolt car & truck, 55-62 car & truck, 8.2″, 8.2″ Buick/Olds/Pontiac & 63-79 Corvette. 1 1/8″ socket, 7/8″ x 16 thread.
Product Features:
See More
Product Features:
- Pinion nut for GM 12 bolt car and truck, 8.2″, 8.2″ Buick, Oldsmobile and Pontiac and 1963-1979 Corvette
- 7/8″ x 16 thread
- 1 1/8″ socket
USA Standard Gear – Spartan Locker For GM 8.5" With 30 Spline Axles, Includes Heavy-Duty Cross Pin Shaft (Part No.17041)
from
$618.99
The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.
Product Features:
See More
Product Features:
- Fits GM 18.5″ with 30 spline axles
- Made from 9310 steel for added strength
- Replaces the spiders in a standard carrier case
Neapco – Universal Joint (Part No.2-0052)
Yukon Gear – Clutch Guide For GM 7.5" & 7.6" Dura Grip (Part No.33251)
Yukon Gear – GM 12 Bolt Passenger Car Cover Gasket (Part No.23014)
National – Shaft Repair Sleeve (Part No.99125)
from
$27.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Powertrax – Lock Right Locker (Part No.2415-LR)
from
$442.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles. Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction. Powertrax® = Extreme Traction Systems!
See More
Yukon Gear – 8.5" & 8.2" GM Carrier Installation Kit (Part No.57008)
from
$109.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for GM 8.2″ & 8.5″ differential. This kit contains carrier bearings, races and shims.
Product Features:
See More
Product Features:
- Fits GM 7.5″, 7.625″ 8.2″ and 8.5″
- Includes carrier bearings and races and “super” carrier shim kit
Yukon Gear – Replacement Carrier Shim Kit For Dana 60, 70, 70HD, 70U & 80 (Part No.55011)
Pro-King – Differential Ring Gear Bolt (Part No.742J935)
from
$0.91
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
Yukon Gear – Positraction Internals For GM 12 Bolt Car And Truck With 33 Spline Axles (Part No.16040)
from
$305.99
Yukon positraction internals for GM 12P and 12T with 33 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit does not include clutches. All components come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Spider gear kit
- Fits GM 12 bolt passenger car with 33 spline Dura Grip positraction
- Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
Yukon Gear – GM 7.5" Standard Open Side Gear Thrust Washer (Part No.33389)
from
$11.99
GM 7.5″ standard Open side gear thrust washer.
Product Features:
See More
Product Features:
- Side gear thrust washer
- Fits GM 7.5″
Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)
from
$148.99
Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.
Product Features:
See More
Product Features:
- Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
Pro-King – Differential Cover Plug (Part No.742G484)
from
$6.59
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
Driveworks – Taper Bearing Cup (Part No.S-LM-501314)
from
$7.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Popular 1980 Pontiac Firebird Drivetrains Categories
1980 Pontiac Firebird Drivetrains
You count on your 1980 Pontiac Firebird to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 314 Drivetrains ranging in price from $1.99 to $1,014.99, you’re sure to find everything you need for your 1980 Pontiac Firebird.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 16 different brands like Moog, Felpro, and DriveWorks. 1980 Pontiac Firebird Drivetrains start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 7,344 extensive product reviews on 1980 Pontiac Firebird Drivetrains. Some of the top-rated Drivetrains products we carry are Greaseable Super Strength Universal Joint with 4.2 stars and Oil Seal with 4.8 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1980 Pontiac Firebird below to get started!
Top-Rated Drivetrains Brands For Your 1980 Pontiac Firebird
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1980 Pontiac Firebird running right for years to come. In our inventory you’ll find brands like Moog, Felpro, DriveWorks, and even more.
Popular Mr. Gasket Drivetrains
You’ll find popular Mr. Gasket brand products across Differentials. All are waiting to get your 1980 Pontiac Firebird back on the road. Some of the top-rated Mr. Gasket products in these categories are:
Top-Rated Drivetrains
If are what you’re looking for, our inventory holds plenty. We stock brand Drivetrains for your 1980 Pontiac Firebird, and some of our most reviewed parts include:
FAQs for 1980 Pontiac Firebird Drivetrains
What are the most purchased Drivetrains for the 1980 Pontiac Firebird?
Out of 314 Drivetrains for the 1980 Pontiac Firebird, the most popular in our inventory are:
What are the top-rated 1980 Pontiac Firebird Drivetrains?
Top-rated Drivetrains for your 1980 Pontiac Firebird based on customer reviews/ratings are:
