1980 Oldsmobile Cutlass Salon Body Parts
Find Your Specific 1980 Oldsmobile Cutlass Salon Body Parts
Below you will find various in-demand Oldsmobile Body Parts, components and accessories for your 1980 Cutlass Salon. Advance Auto Parts has popular Cutlass Salon parts like Vehicle Mirrors, Bodies and Fender Parts, Vehicle Mirrors and more. You’ll also find aftermarket and OEM Body Parts for other Cutlass Salon model years including
1975,
1976,
1977,
1978,
1979,
1985,
1986,
1987 and more. Select a category of 1980 Oldsmobile Cutlass Salon Body Parts below and start saving instantly.
Popular 1980 Oldsmobile Cutlass Salon Body Parts Categories
Essential Body Parts for 1980 Oldsmobile Cutlass Salons
K-Source – Replacement Mirror Glass (Part No.99007)
from
$8.99
Driver Side Replacement Mirror Glass
Product Features:
See More
Product Features:
- Driver side
- Adhesive tape included
- Glass fits mirrors with power functions only
KAI – Door Mirror Glass (Part No.GM1323120)
from
$43.99
New Standard Replacement Driver Side Replacement Mirror Glass, 3 1/8 X 5 1/4 X 5 3/8
Product Features:
See More
Product Features:
- 3 1/8 X 5 1/4 X 5 3/8, Flat Glass
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Energy Suspension – Body Mount Set (Part No.3.4141G)
from
$232.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
Product Features:
See More
Product Features:
- Replace to Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
Energy Suspension – Body Mount Set (Part No.3.4141R)
from
$232.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
Product Features:
See More
Product Features:
- Replace to Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
Burco – Side View Replacement Mirror (Part No.3183)
from
$34.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!
Product Features:
See More
Product Features:
- Made in USA
- Exact Fit
- Safety Smooth Edges
- Replaces OE Mirror
- Premium Mirror Glass
- Break-Free Guarantee
- Instructions Included
Burco – Side View Replacement Mirror (Part No.2109)
from
$39.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!
Product Features:
See More
Product Features:
- Made in USA
- Exact Fit
- Safety Smooth Edges
- Replaces OE Mirror
- Premium Mirror Glass
- Break-Free Guarantee
- Instructions Included
AmeriSeal – Universal Trunk Seal (Part No.31270)
Metro Mould – Cowl Seal (Part No.CS 13-G)
from
$41.49
Cowl Seal
Auto Ventshade (AVS) – Windflector – Classic, Window, Fits Up To 34.25" Wide Sunroofs, Smoke, Outside Mount, 1 Pc (Part No.77002)
from
$59.99
AVS continues its high-quality automotive accessories with the AVS Windflector. Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.
Product Features:
See More
Product Features:
- The Windflector greatly reduces sunroof wind noise and air turbulence
- Prevents the rain from entering the sunroof opening while driving
- Helps reduce heat buildup inside the vehicle
- Available in 5 different sizes for perfect fit
- No drill installation
- Installs quickly and easily with 3M automotive-grade adhesive
Metro Mould – Door Seal (Part No.LM 16-JR)
from
$266.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Molded Door Seals. Pair. R&L.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Door Seal (Part No.LM 16-JE)
from
$270.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Molded Door Seals. Pair. R&L.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Door Seal (Part No.LM 16-S/R)
from
$271.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Rear Molded Door Seals. For 4-door sedan only. Pair. R&L.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Atlas Lift – Lift Support (Part No.LS10000)
from
$27.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!
Product Features:
See More
Product Features:
- Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
- Easy Install – Less than 15 Minutes! based on average install time across all parts
- No Special Tools Required
- Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
- OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
- OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
- World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
- Trilingual Install Instructions provided inside each package
StrongArm – Trunk Lift Support: 9.82" Ext Length, 3.46" Travel, 191 Lbs of Force, 1 Pk (Part No.F4002)
from
$16.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.
Product Features:
See More
Product Features:
- Heavy Gauge Steel Body
- Self-Cleaning Piston Assembly
- Rubber O-Ring Piston Seal
Atlas Lift – Lift Support (Part No.LS10800)
from
$30.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!
Product Features:
See More
Product Features:
- Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
- Easy Install – Less than 15 Minutes! based on average install time across all parts
- No Special Tools Required
- Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
- OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
- OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
- World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
- Trilingual Install Instructions provided inside each package
Metro Mould – T-Top Side Rail Seal (Part No.ELP 5020)
from
$191.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro T-Top Seals all have that show winning look and fit. Our T-Top Seals have a perfect fit. T-top Side Seals. Each. piece 25 In. long. Pair.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Carquest Premium – Door Lock Kit (Part No.DLC1455)
from
$21.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Locksmart – Door Lock Kit (Part No.DL15800)
from
$24.29
LockSmart® is a specialized aftermarket lock brand featuring door, trunk, and ignition lock cylinders. LockSmart® provides OE fit, form, and function locks across domestic and import applications for both late and older model vehicles.
Product Features:
See More
Product Features:
- All door locks are perfectly matched to the original for precision installation
- Professional quality construction using solid brass tumblers, chrome plated brass keys, die-cast zinc lock cores and multiple, randomly assigned key codes ensures superior operation
- Decades of industry leading research and development focused on meeting the technician’s needs
- With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
Carquest Premium – Door Lock Kit (Part No.DLA1081)
from
$24.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Door Lock Kit (Part No.DLC1167)
from
$22.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Door Lock Kit (Part No.DLC1051)
from
$20.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Dorman – Assorted Panel Retainers (Part No.963-026D)
from
$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – Panel Trim Retainer – Interior – GM (Part No.45472)
from
$1.79
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – Assorted Panel Retainers (Part No.963-026)
from
$3.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – Panel Trim Retainer-Interior-GM (Part No.799-125)
from
$4.79
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – GM Interior Panel Retainer (Part No.963-035D)
from
$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Upgrade your 1980 Oldsmobile Cutlass Salon with Top-Quality Body Parts
When it comes to maintaining or upgrading your 1980 Oldsmobile Cutlass Salon, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Oldsmobile or enhancing its overall performance, Body Parts are key to keeping your Cutlass Salon functioning at its best. At Advance Auto Parts, we offer a wide selection of 24 Body Parts for the 1980 Oldsmobile Cutlass Salon, designed to meet your needs without breaking the bank.
From
Vehicle Mirror
replacements to
Bodies and Fender Parts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Body Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Body Parts for your 1980 Oldsmobile Cutlass Salon at great prices.
Our Body Parts inventory for this model
ranges from just $1.29 to $270.99, with
an average price of $61.93.
Our 24 Body Parts in stock come from 10 trusted brands, so you’re sure to find the right part for your 1980 Oldsmobile Cutlass Salon without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1980 Oldsmobile Cutlass Salon, we stock popular OEM and aftermarket Body Parts from top names
like Locksmart Auto Ventshade (AVS), and more.
Locksmart Body Parts
start at just $24.29 and boast an impressive 4 stars average rating from customers.
With 64 customer reviews and counting, our 1980 Oldsmobile Cutlass Salon Body Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Body Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1980 Oldsmobile Cutlass Salon is always ready to roll. We’re committed to providing you with everything you need to keep your Cutlass Salon in top shape, all in one place.
Start shopping confidently below for your 1980 Oldsmobile Cutlass Salon!
Best-Selling Vehicle Mirrors for 1980 Oldsmobile Cutlass Salons
Enhance the driving experience in your Oldsmobile with 1 quality Vehicle Mirror components, starting at $8.99.
K-Source – Replacement Mirror Glass (Part No.99007)
from
$8.99
Driver Side Replacement Mirror Glass
Product Features:
See More
Product Features:
- Driver side
- Adhesive tape included
- Glass fits mirrors with power functions only
Most Popular 1980 Oldsmobile Cutlass Salon Bodies and Fender Parts
Customize your Oldsmobile with 3 Bodies and Fender Parts products
like Body Mounts and
Running Boards and Steps, all
priced under $232.99.
Auto Ventshade (AVS) – Windflector – Classic, Window, Fits Up To 34.25" Wide Sunroofs, Smoke, Outside Mount, 1 Pc (Part No.77002)
from
$59.99
AVS continues its high-quality automotive accessories with the AVS Windflector. Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.
Product Features:
See More
Product Features:
- The Windflector greatly reduces sunroof wind noise and air turbulence
- Prevents the rain from entering the sunroof opening while driving
- Helps reduce heat buildup inside the vehicle
- Available in 5 different sizes for perfect fit
- No drill installation
- Installs quickly and easily with 3M automotive-grade adhesive
Energy Suspension – Body Mount Set (Part No.3.4141R)
from
$232.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
Product Features:
See More
Product Features:
- Replace to Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
Energy Suspension – Body Mount Set (Part No.3.4141G)
from
$232.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
Product Features:
See More
Product Features:
- Replace to Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
Top Picks for 1980 Oldsmobile Cutlass Salon Vehicle Mirrors
Upgrade Oldsmobile Cutlass Salons with top-quality Vehicle Mirrors parts, including 6 OEM and aftermarket selections for your 1980 model.
Burco – Side View Replacement Mirror (Part No.3183)
from
$34.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!
Product Features:
See More
Product Features:
- Made in USA
- Exact Fit
- Safety Smooth Edges
- Replaces OE Mirror
- Premium Mirror Glass
- Break-Free Guarantee
- Instructions Included
Burco – Side View Replacement Mirror (Part No.2109)
from
$39.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!
Product Features:
See More
Product Features:
- Made in USA
- Exact Fit
- Safety Smooth Edges
- Replaces OE Mirror
- Premium Mirror Glass
- Break-Free Guarantee
- Instructions Included
Burco – Side View Replacement Mirror (Part No.2118)
from
$39.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!
Product Features:
See More
Product Features:
- Made in USA
- Exact Fit
- Safety Smooth Edges
- Replaces OE Mirror
- Premium Mirror Glass
- Break-Free Guarantee
- Instructions Included
Burco – Side View Replacement Mirror (Part No.2132)
from
$39.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!
Product Features:
See More
Product Features:
- Made in USA
- Exact Fit
- Safety Smooth Edges
- Replaces OE Mirror
- Premium Mirror Glass
- Break-Free Guarantee
- Instructions Included
Burco – Door Mirror Replacement Glass (Part No.3054)
from
$29.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!
Product Features:
See More
Product Features:
- Made in USA
- Exact Fit
- Safety Smooth Edges
- Replaces OE Mirror
- Premium Mirror Glass
- Break-Free Guarantee
- Instructions Included
Burco – Door Mirror Replacement Glass (Part No.3003)
from
$29.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!
Product Features:
See More
Product Features:
- Made in USA
- Exact Fit
- Safety Smooth Edges
- Replaces OE Mirror
- Premium Mirror Glass
- Break-Free Guarantee
- Instructions Included
In-Demand Vehicle Doors for 1980 Oldsmobile Cutlass Salons
Select from 8 premium Vehicle Doors parts for your 1980 Oldsmobile Cutlass Salon, with prices ranging from $1.29 to $270.99.
Locksmart – Door Lock Kit (Part No.DL15800)
from
$24.29
LockSmart® is a specialized aftermarket lock brand featuring door, trunk, and ignition lock cylinders. LockSmart® provides OE fit, form, and function locks across domestic and import applications for both late and older model vehicles.
Product Features:
See More
Product Features:
- All door locks are perfectly matched to the original for precision installation
- Professional quality construction using solid brass tumblers, chrome plated brass keys, die-cast zinc lock cores and multiple, randomly assigned key codes ensures superior operation
- Decades of industry leading research and development focused on meeting the technician’s needs
- With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
Dorman – GM Interior Panel Retainer (Part No.963-035D)
from
$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – Assorted Panel Retainers (Part No.963-026D)
from
$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – Panel Trim Retainer – Interior – GM (Part No.45472)
from
$1.79
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Metro Mould – Door Seal (Part No.LM 16-JE)
from
$270.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Molded Door Seals. Pair. R&L.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Dorman – Panel Trim Retainer-Interior-GM (Part No.799-125)
from
$4.79
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – Assorted Panel Retainers (Part No.963-026)
from
$3.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – Panel Trim Retainer – Interior – GM (sold by each) (Part No.700-367)
from
$1.29
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Most Sold 1980 Oldsmobile Cutlass Salon Vehicle Hoods
Explore our best-selling Oldsmobile parts for the 1980 Cutlass Salon among 4 OEM and aftermarket options starting from $16.99.
StrongArm – Trunk Lift Support: 9.82" Ext Length, 3.46" Travel, 191 Lbs of Force, 1 Pk (Part No.F4002)
from
$16.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.
Product Features:
See More
Product Features:
- Heavy Gauge Steel Body
- Self-Cleaning Piston Assembly
- Rubber O-Ring Piston Seal
Metro Mould – Cowl Seal (Part No.CS 13-G)
from
$41.49
Cowl Seal
Atlas Lift – Lift Support (Part No.LS10800)
from
$30.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!
Product Features:
See More
Product Features:
- Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
- Easy Install – Less than 15 Minutes! based on average install time across all parts
- No Special Tools Required
- Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
- OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
- OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
- World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
- Trilingual Install Instructions provided inside each package
Atlas Lift – Lift Support (Part No.LS10000)
from
$27.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!
Product Features:
See More
Product Features:
- Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
- Easy Install – Less than 15 Minutes! based on average install time across all parts
- No Special Tools Required
- Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
- OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
- OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
- World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
- Trilingual Install Instructions provided inside each package
Top-Rated Body Parts Brands For Your 1980 Oldsmobile Cutlass Salon
Shop for the best-rated brands offering Body Parts and other products for your 1980 Oldsmobile Cutlass Salons. Below you’ll find some of our best rated Body Parts from Locksmart and Auto Ventshade (AVS), and more. Body Parts from these brands that fit a 1980 Cutlass Salon start at just $24.29 and are rated as high as 4 stars. OEM and aftermarket Body Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular Locksmart 1980 Oldsmobile Cutlass Salon Body Parts
When it comes to maintaining or upgrading your 1980 Oldsmobile Cutlass Salon, using quality Body Parts is essential to ensure durability and a perfect fit. Locksmart ticks all of those boxes. We offer a wide selection of Locksmart Body Parts, specifically designed for the 1980 Oldsmobile Cutlass Salon. With over 1 Locksmart brand Body Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $24.29. Plus, with over 4 customer reviews and an average rating of 4 stars, you can trust that our Locksmart Body Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Popular Auto Ventshade (AVS) 1980 Oldsmobile Cutlass Salon Body Parts
Auto Ventshade (AVS) auto parts is one of the highest quality Body Part brands in the market. Any 1980 Oldsmobile Cutlass Salon owner should feel confident when installing genuine Auto Ventshade (AVS) parts in their vehicle. To ensure the best fit and performance for your 1980 Cutlass Salon, Advance Auto Parts carries a full inventory of 1 Auto Ventshade (AVS) Body Parts. Plus you will be keeping your Oldsmobile in peak condition while saving money because prices on these Auto Ventshade (AVS) Body Parts range up to $59.99, plus, with more than 3 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Body Parts below will deliver on both quality and value.
from
$59.99
$59.99
(3)
Windflector – Classic, Window, Fits Up To 34.25" Wide Sunroofs, Smoke, Outside Mount, 1 Pc
“Purchase was great”
FAQs for 1980 Oldsmobile Cutlass Salon Body Parts
Which Body Parts are best-sellers for 1980 Oldsmobile Cutlass Salons?
Out of 24 Body Parts that fit 1980 Oldsmobile Cutlass Salons, the following parts are the top sellers:
- Trunk Lift Support: 9.82" Ext Length, 3.46" Travel, 191 Lbs of Force, 1 Pk (5940257) – $16.99
- Windflector – Classic, Window, Fits Up To 34.25" Wide Sunroofs, Smoke, Outside Mount, 1 Pc (6012914) – $59.99
- GM Interior Panel Retainer (11910732) – $4.49
What’s the price range for 1980 Oldsmobile Cutlass Salon Body Parts?
Body Part prices for the 1980 Oldsmobile Cutlass Salon start at $1.29 and go up to $270.99 for the most premium parts.
What’s the average price of a Body Part for a 1980 Oldsmobile Cutlass Salon?
The average price for Body Parts for the 1980 Oldsmobile Cutlass Salon is $61.93. Keep in mind the variety of part types within our Body Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Body Parts for other Oldsmobile Cutlass Salon model years?
What are the cheapest Body Parts for my 1980 Oldsmobile Cutlass Salon?
The cheapest 1980 Oldsmobile Cutlass Salon Body Parts we carry in stock are:
- Panel Trim Retainer – Interior – GM (sold by each) (16140235) – $1.29
- Panel Trim Retainer – Interior – GM (5029910) – $1.79
- Assorted Panel Retainers (10658508) – $3.49
- GM Interior Panel Retainer (11910732) – $4.49
- Assorted Panel Retainers (11911015) – $4.49
What types of Body Parts do you sell for my 1980 Oldsmobile Cutlass Salon?
As of 2/5/25, these are some of the most in-demand types of Body Parts for a 1980 Oldsmobile Cutlass Salon:
Can I get help with 1980 Oldsmobile Cutlass Salon Body Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Oldsmobile Body Parts and more.
What is your return policy for Oldsmobile Cutlass Salon Body Parts?
Advance Auto Parts keeps returns simple. For new Oldsmobile Cutlass Salon Body Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
