1980 Jeep Wagoneer Wheel Bearings
More 1980 Jeep Wagoneer Wheel Bearings
Find your specific 1980 Jeep Wagoneer original or aftermarket Wheel Bearings below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1980 Jeep Wagoneer Wheel Bearings
Crown Auto Jeep Replacmnt – OE Replacement (Part No.J3156052)
from
$26.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Manufactured From High Quality Material
- Engineered To The Specifications
- Meets The Quality Standards
- Designed For Performance And Durability
- Easy To Install
FAG US – TAPERED ROLLER BEARI (Part No.KT2)
from
$9.79
TAPERED ROLLER BEARI
Driveworks – Wheel Bearing: Direct Fit, 1 Piece (Part No.S-5707)
from
$13.79
WJB Automotive wheel bearings are a direct replacement for original parts at a much more affordable cost. Each wheel bearing is engineered to meet or exceed OE specifications, and goes through intensive quality control inspections to ensure proper fitment. Manufactured using high-precision machinery and advanced heat treatment processes, these bearings are designed for maximum durability and extended periods of use under any driving condition. Specific to certain applications, WJB bearings have multi-lip seals built into the bearing for increased protection against invasive contaminants and premature wear.
Product Features:
See More
Product Features:
- Depending on the application, specified WJB wheel bearings have integrated encoder rings that automatically sync with the vehicle’s anti-lock braking system (ABS) upon successful installation
- Engineered, manufactured, and tested to meet or exceed OE specifications
- Integrated seal design improves contamination resistance for a longer bearing life
- High performance grease is used to lubricate the inner raceway to ensure smooth operation, higher operating temperatures, and minimal noise
- Manufactured from high quality steel to maximize durability under even the harshest driving conditions
- Brand may vary by location
Driveworks – Taper Bearing Cone (Part No.S-M-86649)
from
$8.79
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Driveworks – Tapered Roller Bearing (Part No.S-A-9)
Driveworks – Wheel Bearing: Direct Fit, 1 Piece (Part No.S-A-10)
from
$19.49
WJB Automotive wheel bearings are a direct replacement for original parts at a much more affordable cost. Each wheel bearing is engineered to meet or exceed OE specifications, and goes through intensive quality control inspections to ensure proper fitment. Manufactured using high-precision machinery and advanced heat treatment processes, these bearings are designed for maximum durability and extended periods of use under any driving condition. Specific to certain applications, WJB bearings have multi-lip seals built into the bearing for increased protection against invasive contaminants and premature wear.
Product Features:
See More
Product Features:
- Depending on the application, specified WJB wheel bearings have integrated encoder rings that automatically sync with the vehicle’s anti-lock braking system (ABS) upon successful installation
- Engineered, manufactured, and tested to meet or exceed OE specifications
- Integrated seal design improves contamination resistance for a longer bearing life
- High performance grease is used to lubricate the inner raceway to ensure smooth operation, higher operating temperatures, and minimal noise
- Manufactured from high quality steel to maximize durability under even the harshest driving conditions
- Brand may vary by location
National – Wheel Bearing: Direct Fit, 1 Piece (Part No.A-10)
from
$32.49
Manufactured with premium-grade steel, National taper bearing sets feature crowned raceways and rollers to ensure even load distribution.
Product Features:
See More
Product Features:
- CONSISTENT PERFORMANCE — Matched cup and cone components ensure consistent performance
- PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN — Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Yukon Gear – Replacement Axle Bearing And Seal Kit For ’77 To ’91 Dana 44 And Jeep Wagoneer Front Axle (Part No.10033)
from
$125.99
Yukon replacement axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Axle bearing and seal kit for ’77 to ’91 Dana 44 and Jeep Wagoneer front axle. This kit includes Timken inner and outer bearings and races along with high quality seals. Unit is sold per side and is covered for one year against manufacturing defects. This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Fits 1977-1991 Jeep Wagoneer
- Includes axle bearings, races and seal
- Services one side
MOOG Hub Assemblies – Wheel Bearing and Hub Assembly (Part No.513107)
from
$123.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Precision Matched Components: Rigorously controlled manufacturing processes ensure exact matching of bearing raceways and rolling elements to consistently deliver superior performance and minimize noise and vibration.
- Engineered to overcome problems and deliver smooth, reliable performance.
- MOOG® hub assemblies are performance proven, quality tested and are available for a broad range of foreign and domestic vehicles.
- Application specific design
MOOG Hub Assemblies – Wheel Bearing and Hub Assembly: Front, 5 Studs (Part No.513084)
from
$147.99
Product Features:
See More
- EXTENDED SERVICE LIFE – Application-specific advanced raceway design reduces stress, rotation and heat on components
- KEEPS WATER AND DIRT OUT – Quad lip seal design inhibits damage by keeping moisture and other contaminants out
- EASY TO INSTALL – Engineered and designed for fast, hassle-free installation
- CORROSION PROTECTION – Coated wheel studs resist corrosion and rust for easier removal and proper torqueing
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
FAG US – TAPERED ROLLER BEARI (Part No.KT37)
from
$28.49
TAPERED ROLLER BEARI
FAG US – BEARING CONE (Part No.KLM11949)
from
$10.49
BEARING CONE
Dorman – Hub Bearing Assembly (Part No.4110340)
from
$88.99
To prevent damages to your spindle, wheels and hubs we offering replacement Wheel Bearing and Hub Assemblies. All our Wheel Bearing and Hub Assemblies are direct replacements for a proper fit.
Product Features:
See More
Product Features:
- Constructed from high-quality materials for extended durability
- Manufactured to strict engineering quality standards
- Replacement eliminates noises associated with original failure
- Axles also available, sold separately
Dorman – Hub Bearing Assembly (Part No.4110307)
from
$80.99
To prevent damages to your spindle, wheels and hubs we offering replacement Wheel Bearing and Hub Assemblies. All our Wheel Bearing and Hub Assemblies are direct replacements for a proper fit.
Product Features:
See More
Product Features:
- Constructed from high-quality materials for extended durability
- Manufactured to strict engineering quality standards
- Replacement eliminates noises associated with original failure
- Axles also available, sold separately
Yukon Gear – Hardcore Drive Flange Kit For Dana 44, 19 Spline Outer Stubs – Non-Engraved Caps (Part No.29079)
from
$429.99
Yukon hardcore drive flange kit for Dana 44, 19 spline outer stubs. Non-engraved caps..
Product Features:
See More
Product Features:
- Drive flange kit
- Fits Dana Spicer 44 with 19 spline outer axles
- Includes two drive flanges, two caps and all necessary hardware
Yukon Gear – Hardcore Drive Flange Kit For Dana 44, 30 Spline Outer Stubs – Engraved Caps (Part No.29065)
from
$429.99
Yukon hardcore drive flange kit for Dana 44, 30 spline outer stubs. Yukon engraved caps.
Product Features:
See More
Product Features:
- Drive flange kit
- Fits Dana Spicer 44 with 30 spline outer axles
- Includes two drive flanges, two Yukon engraved caps and all necessary hardware
Yukon Gear – Hardcore Drive Flange Kit For Dana 44, 19 Spline Outer Stubs – Engraved Caps (Part No.29080)
from
$429.99
Yukon hardcore drive flange kit for Dana 44, 19 spline outer stubs. Yukon engraved caps.
Product Features:
See More
Product Features:
- Drive flange kit
- Fits Dana Spicer 44 with 19 spline outer axles
- Includes two drive flanges, two Yukon engraved caps and all necessary hardware
Yukon Gear – Hardcore Drive Flange Kit For Dana 44, 30 Spline Outer Stubs – Non-Engraved Caps (Part No.29066)
from
$436.99
Yukon hardcore drive flange kit for Dana 44, 30 spline outer stubs. Non-engraved caps.
Product Features:
See More
Product Features:
- Drive flange kit
- Fits Dana Spicer 44 with 30 spline outer axles
- Includes two drive flanges, two caps and all necessary hardware
Yukon Gear – Drive Flange, 19 Spline Inner, 48 Spline Outer (Part No.29078)
from
$129.99
Drive flange, 19 spline inner, 48 spline outer.
Product Features:
See More
Product Features:
- Drive flange
- Fits Dana 44
- 19 spline
- One single flange
Yukon Gear – Hardcore Drive Flange, 30 Spline Inner, 48 Spline Outer (Part No.29075)
from
$129.99
Drive flange, 30 spline inner, 48 spline outer.
Product Features:
See More
Product Features:
- Drive flange
- Fits Dana 44
- 30 spline
- One single flange
National – Bearings (Part No.JLM104910)
from
$9.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
SKF – Wheel Bearing Race (Part No.K8002345514SKF)
from
$7.61
The SKF Wheel Bearing Race is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
National – Bearings (Part No.24720)
from
$17.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Popular 1980 Jeep Wagoneer Wheel Bearings Categories
1980 Jeep Wagoneer Wheel Bearings
Maybe you’re in the middle of a full rebuild of that 1980 Jeep Wagoneer. Maybe you just need a couple of Wheel Bearings. Either way, Advance Auto Parts has 16 different Wheel Bearings in our inventory ranging from $9.99 to $436.99. That means you can find the exact parts or products you need to keep that 1980 Jeep Wagoneer running smoothly.
Wheel Bearings are only as good as their brand. We stock 5 different brands to make sure you have plenty of trusted parts to choose from for your 1980 Jeep Wagoneer. National, Driveworks, and Crown Auto Jeep Replacmnt are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Wheel Bearings for your 1980 Jeep Wagoneer, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Wheel Bearings to keep your 1980 Jeep Wagoneer rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Wheel Bearings Brands To Make Your 1980 Jeep Wagoneer Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1980 Jeep Wagoneer demands trusted brand parts and products to keep it running. Many trusted brands of Wheel Bearings make up Advance Auto Parts’ inventory, and all are ready to help make your Wagoneer the best it can be. Be sure to browse some of our top Wheel Bearings brands and parts.
Popular National Wheel Bearings
We carry National parts in our stock across Wheel Races and Front Wheel Bearings categories, plus more. For a 1980 Jeep Wagoneer, our most popular National Wheel Bearings include:
Top 1980 Jeep Wagoneer Wheel Bearings from National
National products are another trusted brand when it comes to Wheel Bearings for your 1980 Jeep Wagoneer. Popular National parts include:
FAQs for 1980 Jeep Wagoneer Wheel Bearings
What are the most purchased Wheel Bearings for the 1980 Jeep Wagoneer?
Out of 16 Wheel Bearings for the 1980 Jeep Wagoneer, the most popular in our inventory are:
from
$64.99
This product is not rated
For Use With Dana 35 Rear Axle Or 44 Rear Axle
Front Wheel Bearings
