1980 Jeep J10 Differentials

Find your specific 1980 Jeep J10 original or aftermarket Differentials below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1980 Jeep J10 Differentials

from

$259.99

USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:

Fits Dana Spicer 44 rear
Uses Koyo bearings and races
30 spline
Rear axle kit
Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, oil baffles and slingers, thread locker, marking compound with brush and gasket.

from

$268.99

Product Features:

AMC MODEL 20 R&P-3.54 RATIO

from

$399.99

Yukon positraction internals for Dana 44 Dura Grip posi, 30 spline. Does not include clutches. Does NOT fit Trac Loc or Powr Lok. Fits Dura Grip ONLY.

Product Features:

Spider gear kit
Fits Dana Spicer 44 with Dura Grip positraction
Includes two side gears, four pinion gears, cross pin shaft, roll pin and spider gear thrust washers.

from

$4.99

Pinion gear thrust washer for 8″ and 9″ Ford, Model 20, and 7.25″ Chrysler.

Product Features:

Pinion gear thrust washer for Ford 8″, Ford 9″ and Chrysler 7.25″

from

$8.89

CUP

from

$109.99

Product Features:

Drive flange cap
Fits Dana 44
Yukon engraved

from

$522.99

For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.

Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.

Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.

Powertrax® = Extreme Traction Systems!

from

$15.99

Model 20 gasket.

Product Features:

Cover gasket
Fits AMC Model 20

from

$232.99

Product Features:

Clutch kit
Fits Dana Spicer 44 and Chrysler 8.75″ Powr Lok
Aggressive design

from

$21.29

Product Features:

PINION SHIMS – AMC MODEL 20

from

$26.99

Dana 30 & Dana 44 Power Lok bolt, left hand, & 8.75″ Chrysler & 55P.

Product Features:

Power Lok case bolt for Dana Spicer 30, Dana Spicer 44, Chrysler 8.75″ and 1955-1964 GM passenger car
Left hand thread

from

$52.79

All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!

from

$175.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

Fits AMC Model 20
Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.

from

$689.99

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings
Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications

from

$596.99

from

$5.99

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Improve The Performance
Easy Installation

from

$11.29

This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.

Product Features:

Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$6.99

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Improve The Performance
Easy Installation

from

$57.99

3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.

Product Features:

Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive

from

$9.99

5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.

Product Features:

Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
1/2″ head

from

$6.99

Product Features:

D30 PRE-LOAD SPACER (SHIM PACK)

from

$359.99

Aluminum Girdle replacement cover for Dana 44 TA HD.

Product Features:

Fits standard rotation Dana Spicer 44
Aluminum girdle cover

from

$6.99

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t

Product Features:

Pinion nut for Dana Spicer 25, 27, 30, 44, 50 and GM 7.75″
3/4″ x 16 thread

from

$3.99

Replacement ring gear bolt for Model 20, Grand Cherokee 35, “Super” Dana 30 & Dana 50. 7/16″ x 20.

Product Features:

Ring gear bolt for AMC Model 20, “Super” 35, Dana Spicer “Super” 30 and Dana Spicer 50
7/16″ 20 thread

from

$255.99

Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:

Fits AMC Model 20
Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve, marking compound and brush.

from

$5.99

Product Features:

Side gear thrust washer for Ford 8″, Ford 9″ and AMC Model 20
0.030″ thick

from

$3.99

Replacement pinion nut washer for Dana 25, 27, 30, 36, 44 & 53.

Product Features:

Pinion nut washer for Dana Spicer 25, 27, 30, 44 and 50

from

$6.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

Popular 1980 Jeep J10 Differentials Categories

Differential Oil

Rear Differential Cover Gaskets

Differential Open Unit and Components

Differential Covers

Differential Pinion Shaft Lock Bolts

Differential Bearings

Differential Axle Shafts

Differential Pinion Pilot Bearings

Differential Cover Bolts

Differential Carriers

Differential Bearing Kits

Front Differential Pinion Bearings

Differential Spider Gear Kits

Differential Rebuild Kits

Differential Carrier Shim Kits

Differential Pinion Seals

Differential Clutch Packs

Differential Ring and Pinions

Differential End Yokes

Differential Lock Assemblies

Differential Air System Seal Housings

Rear Differential Pinion Bearings

Differential Spools

Differential Carrier Bearings

Front Differential Cover Gaskets

Rear Housing Cover Gaskets

Differential Pinion Bearing Kits

Differential Seals

Complete Differentials

Differential Drain Plugs

Differential Ring Gear Bolts

Bearing Race Drivers

Differential Crush Sleeves

Differential End Yoke Nut

Differential Side Bearing Spacers

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Gear Install Kits

Differential Cross Pins

Differential Side Gear Thrust Washers

Differential Pinion Bearing Baffles

Differential Pinion Gear Thrust Washers

Differential Drive Pinion Oil Deflectors

Differential Carrier Bolts

Differential Pinion Gear Washers

Limited Slip Differential Assemblies

Differential Clutch Pack Clips

Differential Pinion Bearing Spacers

Differential Lock Thrust Blocks

Maybe you’re in the middle of a full rebuild of that 1980 Jeep J10. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 234 different Differentials in our inventory ranging from $1.49 to $1,566.99. That means you can find the exact parts or products you need to keep that 1980 Jeep J10 running smoothly.

Differentials are only as good as their brand. We stock 13 different brands to make sure you have plenty of trusted parts to choose from for your 1980 Jeep J10. Yukon Gear, FELPRO, and National are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1980 Jeep J10, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 46 reviews in this category, some of the top rated parts include Differential Ring and Pinion with 4.0 stars and Differential Pinion Nut with 4.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1980 Jeep J10 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1980 Jeep J10 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1980 Jeep J10 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your J10 the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular National Differentials

We carry National parts in our stock across Differential Pinion Pilot Bearings and Differential Pinion Seals categories, plus more. For a 1980 Jeep J10, our most popular National Differentials include:

from $43.99

(2)

Shaft Repair Sleeve

Differential Pinion Pilot Bearings

from $23.29

(4)

Multi Purpose Seal

Differential Pinion Seals

Top 1980 Jeep J10 Differentials from Felpro

Felpro products are another trusted brand when it comes to Differentials for your 1980 Jeep J10. Popular Felpro parts include:

from $6.49

(10)

Axle Housing Cover Gasket

Rear Housing Cover Gaskets

FAQs for 1980 Jeep J10 Differentials

What are the most purchased Differentials for the 1980 Jeep J10?

Out of 234 Differentials for the 1980 Jeep J10, the most popular in our inventory are:

from $57.99

This product is not rated

3 Qt – 80W90 Conventional Gear Oil With Posi Additive

Differential Oil

from $11.99

This product is not rated

Replacement Ring Gear Bolt For Model 35, Dana 25, 27, 30 & 44 – 3/8" X 24

Differential Ring Gear Bolts

from $10.49

(3)

Oil Seal

Differential Pinion Seals

What are the top-rated 1980 Jeep J10 Differentials?

Top-rated Differentials for your 1980 Jeep J10 based on customer reviews/ratings are:

from $193.99

(1)

Differential Ring and Pinion

“Hard to find items with a low price compared to others in the country, and shipping costs where the best.”

from $6.49

(1)

Differential Pinion Nut

“If a pinion nut is ever removed from the pinion shaft, it is recommended NOT to reuse it. Replace it with a BRAND NEW nut, even if the old nut is rel”

from $168.99

(1)

Differential Master Bearing Kit – Timken

“This was supposed to be an exact fit according to the website for a1999 dodge ram 1500 with 4wd. The bearings look to be correct but the crush sleeve,”

1980 Jeep J10 Differentials

More 1980 Jeep J10 Differentials

Essential 1980 Jeep J10 Differentials

USA Standard Gear – Dana 44 Master Overhaul Kit Replacement (Part No.37015)

Motive Gear – Differential Ring and Pinion (Part No.AM20-354)

Yukon Gear – Positraction Internals For Dana 44 Dura Grip Posi, 30 Spline (Part No.16168)

Yukon Gear – Pinion Gear And Thrust Washer For 8" And 9" Ford, Model 20, And 7.25" Chrysler (Part No.33301)

FAG US – CUP (Part No.15245)

Yukon Gear – Drive Flange Cap For Dana 44, Engraved (Part No.32135)

Powertrax – No-Slip Traction System (Part No.9201202900)

Yukon Gear – Model 20 Gasket (Part No.23025)

Yukon Gear – Replacement Clutch Set For Dana 44 Powr Lok, Aggressive (Part No.16151)

Motive Gear – Differential Pinion Shim Kit (Part No.1127)

Yukon Gear – Dana 30 & Dana 44 Power Lok Bolt, Left Hand, & 8.75" Chrysler & 55P (Part No.33234)

Motive Gear – Differential Gear Install Kit (Part No.AM20IK)

Yukon Gear – Pinion Install Kit For Model 20 Differential (Part No.13082)

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

Powertrax – Grip PRO Traction System (Part No.GT436035)

Crown Auto Jeep Replacmnt – Model 30 Front Axle/ Model 44 Front Axle/ Model 35 Rear Axle/ Amc 20 Rear Axle (Part No.J3182601)

Needa Parts – Standard Engine Oil Drain Plug: 7/8 " -16 Thread, 1-1/8 " Head (Sold by each) (Part No.090-018)

Crown Auto Jeep Replacmnt – For Dana 30/ Dana 44, Oem Replacement (Part No.83503390)

Yukon Gear – 3 Qt – 80W90 Conventional Gear Oil With Posi Additive (Part No.15003)

Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)

Motive Gear – Differential Pinion Shim Kit (Part No.1114)

Yukon Gear – Aluminum Girdle Replacement Cover For Dana 44 Ta HD (Part No.32110)

Yukon Gear – Replacement Pinion Nut For Dana 25, 27, 30, 36, 44, 53 & GM 7.75" (Part No.33143)

Yukon Gear – Replacement Ring Gear Bolt For Model 20, Grand Cherokee 35, "Super" Dana 30 & Dana 50 – 7/16" X 20 (Part No.33040)

Yukon Gear – Bearing Install Kit For Model 20 Differential (Part No.11081)

Yukon Gear – Dana 44, Ford 8" / 9", And Model 20 Side Gear Thrust Washer Replacement (Part No.33283)

Yukon Gear – Dana 25 / 27 / 30 / 36 / 44 / 53 Pinion Nut Washer Replacement (Part No.33163)

Felpro – Axle Housing Cover Gasket (Part No.RDS 6629)

Popular 1980 Jeep J10 Differentials Categories