1980 Jeep CJ7 Performance Engines

Essential 1980 Jeep CJ7 Performance Engines

Omix – Engine Gasket Set (Part No.17441.03)

Engine Gasket Set

from

$82.99
Are your Jeep’s engine gaskets leaking? Or, are you rebuilding an engine and need fresh gaskets? Omix-ADA offers high-quality replacement gaskets that will give you years of service and get you back on the road.

Product Features:
  • Full Upper Gasket Set
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Edelbrock – Performer-Plus Camshaft Kit for AMC 290-401 V8 (Part No.2132)

Performer-Plus Camshaft Kit for AMC 290-401 V8

from

$353.99


Product Features:
  • Designed for Optimum Torque and Acceleration
  • Maximum Performance From Idle through Mid-Range
  • Matched To Performer Intakes PN[2131/3731]
  • Includes Hydraulic Lifters and Assembly Lube
  • Major Improvement in Throttle Response and Torque
  • Use For Daily Drivers/Trucks/Vans/RVs/4x4s
  • Take The Guesswork Out Of Camshaft Selection
See More

B & M – Tork Master 2000 (Part No.20400)

Tork Master 2000

from

$266.99
Torque Converter – Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost

Product Features:
  • New Precision Pump Drive Tube
  • Pressure Tested
  • Fully Balanced
  • Needle Thrust Bearing
  • New Thrust Washer
See More

B & M – Torque Converter, Nitrous Holeshot 3000 (Part No.20481)

Torque Converter, Nitrous Holeshot 3000

from

$696.99
Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.

Product Features:
  • 2800-3200 RPM
  • Small And Big Blocks
  • Serious Performance
  • Furnace Brazed
  • Fully Balanced
See More

Omix – Timing Cover Oil Seal (Part No.17449.50)

Timing Cover Oil Seal

from

$15.49
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Metal Outer Rubber Inner
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Timing Kit (Part No.17452.06)

Timing Kit

from

$88.99
Timing chains stretch over time. If left untouched, they can begin jumping teeth on the camshaft and crankshaft sprockets. This will change your timing and will do major damage to your Jeep’s engine. It is recommended that you change the timing chain and

Product Features:
  • 3 Piece Kit
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Timing Chain (Part No.17453.02)

Timing Chain

from

$20.99
Timing chains stretch over time. If left untouched, they can begin jumping teeth on the camshaft and crankshaft sprockets. This will change your timing and will do major damage to your Jeep’s engine. It is recommended that you change the timing chain and

Product Features:
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Piston (Part No.17427.09)

Piston

from

$73.99
Are you rebuilding an engine and need a fresh set of pistons? Omix-ADA offers high-quality replacement pistons from Standard to .080 thousandths over size. Wrist pins included. They will give you years of service and get you back on the road. Sold individ

Product Features:
  • .030 Over
  • Engine Work May Be Required To Install This Part
  • Limited 5 Year Warranty
See More

Omix – Piston (Part No.17427.08)

Piston

from

$73.99
Are you rebuilding an engine and need a fresh set of pistons? Omix-ADA offers high-quality replacement pistons from Standard to .080 thousandths over size. Wrist pins included. They will give you years of service and get you back on the road. Sold individ

Product Features:
  • .020 Over
  • Engine Work May Be Required To Install This Part
  • Limited 5 Year Warranty
See More

Edelbrock – Sure Seat; Valve Spring (Part No.5932)

Sure Seat; Valve Spring

from

$89.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:
  • For Use With Cast Iron Heads
  • Springs Made of Highest Quality Spring Wire
  • Springs Precision Wound To Close Tolerances
  • Use with Original Equipment Heads Only
See More

FEL-PRO Performance – Engine Oil Pan Gasket Set (Part No.1813)

Engine Oil Pan Gasket Set

from

$15.29
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
  • With steel core to provide ultimate excellent blowout resistance.
  • Not intended for use in emission controlled vehicles.
See More

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1621)

Engine Valve Cover Gasket Set

from

$13.29
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
  • Not intended for use in emission controlled vehicles.
See More

FEL-PRO Performance – Performance Intake Manifold Gasket Set (Part No.1232)

Performance Intake Manifold Gasket Set

from

$29.19
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions.

Product Features:
  • Fel-Pro performance intake manifold gaskets have been tested with virtually all aftermarket cylinder head and intake manifold combinations.
  • Performance intake manifold gaskets designed without a metal core, to allow engine builders to trim the gasket for exact fit on modified ports.
  • Exc. Super Duty Engines.
  • Printoseal® elastomeric sealing beads to provide extra sealing strength around the intake port.
  • Not intended for use in emission controlled vehicles.
See More

Omix – Thermostat Gasket (Part No.17117.03)

Thermostat Gasket

from

$3.49
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • OE Style
  • Direct Fit
  • Highly Durable
  • Long Lasting
  • Limited 5 Year Warranty
See More

Edelbrock – Performer AMC; Intake Manifold (Part No.37311)

Performer AMC; Intake Manifold

from

$627.99


Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 deg. Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • 50-State Street Legal if Correct Carburetor Used
See More

Edelbrock – Performer AMC; Intake Manifold (Part No.21311)

Performer AMC; Intake Manifold

from

$592.99


Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 deg. Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • 50-State Street Legal if Correct Carburetor Used
  • Not for Stock Motorcraft Spread Bore Carburetor
  • Two Center Bolt Holes are Offset
See More

Edelbrock – Performer EGR AMC Intake Manifold (Part No.3731)

Performer EGR AMC Intake Manifold

from

$484.99


Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 deg. Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • 50-State Street Legal if Correct Carburetor Used
See More

Omix – Water Pump (Part No.17104.16)

Water Pump

from

$182.99
Is your water pump leaking? Over time the rubber impeller will deteriorate. It’s easier to replace it now than to have a roadside breakdown in the future. Get a high quality water pump from Omix-ADA. Keep your Jeep running cool.

Product Features:
  • OE Style
  • Direct Fit
  • High Quality
  • Efficient Cooling
  • Limited 5 Year Warranty
See More

Edelbrock – Water Pump AMC Long Style 1973-Later (Part No.8832)

Water Pump AMC Long Style 1973-Later

from

$347.99
Edelbrock #8832 Water Pump AMC long style 1973-later ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using state-of-the-art racing technology, Edelbrock has designed these “super cooling” Water Pumps

Product Features:
  • Standard Impeller Rotation
  • 0.625 in. Pilot Shaft
  • 0.750 in. Ball/Ball Bearing
  • 4.1875 in. Block To Hub Height
  • Satin Finish
See More

Omix – Engine Gasket Set (Part No.17442.01)

Engine Gasket Set

from

$87.99
Are your Jeep’s engine gaskets leaking? Or, are you rebuilding an engine and need fresh gaskets? Omix-ADA offers high-quality replacement gaskets that will give you years of service and get you back on the road.

Product Features:
  • Full Lower Gasket Set
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Piston Ring Set (Part No.17430.23)

Piston Ring Set

from

$98.99
Are you rebuilding an engine and need a fresh set of piston rings? Omix-ADA offers high-quality replacement piston ring sets from Standard to .080 thousandths over size. They will give you years of service and get you back on the road.

Product Features:
  • .060 Over
  • Engine Work May Be Required To Install This Part
  • Limited 5 Year Warranty
See More

1980 Jeep CJ7 Performance Engines

Maybe you’re in the middle of a full rebuild of that 1980 Jeep CJ7. Maybe you just need a couple of Performance Engines. Either way, Advance Auto Parts has 25 different Performance Engines in our inventory ranging from $3.49 to $840.99. That means you can find the exact parts or products you need to keep that 1980 Jeep CJ7 running smoothly.

Performance Engines are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 1980 Jeep CJ7. Edelbrock, Omix, and B & M are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Performance Engines for your 1980 Jeep CJ7, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 2 reviews in this category, some of the top rated parts include Engine Oil Pan Gasket Set with 5.0 stars.

So if you’re in the market for aftermarket Performance Engines to keep your 1980 Jeep CJ7 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Performance Engines Brands To Make Your 1980 Jeep CJ7 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1980 Jeep CJ7 demands trusted brand parts and products to keep it running. Many trusted brands of Performance Engines make up Advance Auto Parts’ inventory, and all are ready to help make your CJ7 the best it can be. Be sure to browse some of our top Performance Engines brands and parts.

Popular Edelbrock Performance Engines

We carry Edelbrock parts in our stock across Performance Intake Manifolds categories, plus more. For a 1980 Jeep CJ7, our most popular Edelbrock Performance Engines include:
Performer Intake Manifold for 1970-91 AMC, Non-EGR, Satin Finish
from $424.99
(1)
Performer Intake Manifold for 1970-91 AMC, Non-EGR, Satin Finish
Performance Intake Manifolds

FAQs for 1980 Jeep CJ7 Performance Engines

What are the most purchased Performance Engines for the 1980 Jeep CJ7?

Out of 25 Performance Engines for the 1980 Jeep CJ7, the most popular in our inventory are:
Cylinder Head Gasket
from $28.99
This product is not rated
Cylinder Head Gasket
Performance Engine Cylinder Head Gaskets
Performer EGR AMC Intake Manifold
from $484.99
This product is not rated
Performer EGR AMC Intake Manifold
Performance Intake Manifolds
Engine Gasket Set (Head / Intake / Exhaust / Valve Cover) for AMC/Jeep
from $171.99
This product is not rated
Engine Gasket Set (Head / Intake / Exhaust / Valve Cover) for AMC/Jeep
Performance Engine Cylinder Head Gaskets

What are the top-rated 1980 Jeep CJ7 Performance Engines?

Top-rated Performance Engines for your 1980 Jeep CJ7 based on customer reviews/ratings are:
Engine Oil Pan Gasket Set
from $15.29
(1)
Engine Oil Pan Gasket Set
“used this part for a mercruiser 140. which is a 181 cubic inch gm motor. the 4 piece design was nice. however if you are going to change the gasket wi”